Materials and Design

Analysis of Numerical Simulation for Seismic Performance of MMCsA Numerical Approach for the Simulation of Cementitious MaterialsAnalysis of Stress on Interface Crack of Orthotropic and Isotropic Bi-MaterialsFabrication of Ti66V13Cu8Ni6.8Al6.2 Bulk Composites with High Strength by Spark Plasma Sintering and Crystallization of Amorphous PhaseHydration Kinetics Of Carbonized Spinel Carbon Brick With Al
In Situ Fabrication of Particles Reinforced Al-Si-Al2O3 Composites by Hot Isostatic PressingImproving Staircase Effect in the Process of Ceramic Laser GellingGas Barrier Properties of SiOX Films Deposited by RF Magnetron Co-SputteringExperimental Study on Effects of Laminated Structure on Acoustic Insulation Property of CompositesA Novel Approach to Disperse CuO onto the Zeolites Mordenite and BetaDry Sliding Wear Resistance of NiMo/Mo2Ni3Si Intermetallic CompositesFabrication, Microstructure and Properties of Nitrides Bonded Alumina Castables by In Situ Nitridation ReactionResearch on the Performance of SiAlON-Graphite-SiC CompositesFabrication of Barrel-Type Pre-Formed Shape of Al2O3f+Cf/ZL109 Composite Material?-Cyclodextrin-Cross-Linked Polymer Microcolumn Dynamic Preconcentration/analysis for Trace CadiumInvestigation on Cleansing the if Molten Steel with the Dispersed In Situ Phase Induced by the Composite Ball Explosive Reaction in RH LadlesEffect of Electromagnetic Stirring on Microstructure of In Situ Synthesized (Al2O3+Al3Zr)P/Al CompositesEffect of La on Solute Segregation during Solidification of Al2O3?SiO2f/A356 Alloy CompositeEffect of Fumed Titanium Oxide on Thermal Stability of Nano-Silica Thermal Insulating CompositesPressureless Infiltration Fabricated Steel Matrix Composites Reinforced with WC by the Local Electromagnetism Induction HeatingA Study on the Influence of Different Anionic Surfactants on the AFM Scanning and Imaging of SWCNTsSepiolite/CuFe2O4 Composite: a Magnetic Absorbent for Removal of Contaminants from WaterEnhanced Room Temperature Magnetoresistance in La0.7Ca0.2Sr0.1MnO3/BN CompositesPrepartion of Organophilic Bentonite / Paraffin Composite Phase Change Energy Storage Material with Melting Intercalation MethodImpact Compressive Character of Balanced Angle-Ply Carbon/Epoxy CompositesThe Research for Bitmap and Vector Conversion MethodsThe Study of Welding Power-Arc System Stability Based on DFCDEvaluation of Sulfide Capacity Models and Application in Steelmaking SlagsResearch on Tunnel Effect of Carbon Black-Filled Cement-Based CompositesEffect of ZnO-Loading Method on Methyl Orange Removal Capacities of Expanded Graphite/ZnO CompositesRelation between Impact Properties and Interfacial Strength of UHMWPE/VE CompositesJoining Aluminium to Titanium by MIG Welding-Brazing ProcessRemoval of Methyl Orange from Aqueous Solution by Using Exfoliated Graphite/ZnO CompositesEffect of ZnO-Loading Method on Adsorption and Decomposition Capacities of Expanded Graphite/ZnO Composites for Crude OilPreparation and Characterization of A Metal-Based Al/Al2O3 Gradient CoatingInvestigation on the Alkali-Resistance Properties of Basalt Fiber Reinforced Plastics Bars in ConcreteFlame Retardant ABS with a Novel Polyphosphate Derived from BiomassEffect of Preparation Technique on Methyl Orange Sorption Behavior of Exfoliated GraphiteQSPR Study on Electric Spark Sensitivity of Nitro ArenesPreparation and Characterization of Al2TiO5- Si3N4 Composites by Reaction Sintering ProcessMechanical and Tribological Properties of PTW/PTFE/PPS/PES CompositesEffect of Silicon on Molten Iron Corrosion Resistance of Corundum-Silicon Nitride CompositesPreparation and Study of Polyethylene Glycol (PEG)/Titanium Dioxide (TiO2) Phase Change MaterialsInvestigation of Microemulsion System for Transdermal Delivery of MatrineInvestigation of Phase Composition and Microstructure of the FeAl/Al2O3 Composites Fabricated by Mechanical Alloying and Plasma Active Sintering ProcessMicrostructure of Directionally Solidified Ni-Ni3Si Hypoeutectic In Situ CompositeSynthesis and Characterization of Tri-N-Octylamine-Intercalated a-Zirconium PhosphateStudy on Removal Arsenic from Iron Ore with Arsenic in Sintering ProcessEffect of Molar Ratio of MgO/Al2O3 on the Performance of MgO-Al2O3-Fe2O3 CompositePreparation and Isothermal Crystallization Behavior of Poly(lactic acid)/Graphene NanocompositesProperties of PANI-PVA Composite FilmMicro-Structure and Rheological Properties of HIPS Matrix Composites Filled with Magnesium Hydroxide Whisker Modified with Styrene via In Situ PolymerizationNeural Network Based On the Improved Genetic Algorithm to Optimize Component Separation Conditions of Small PeptideMicrostructure and Abrasive Wear Characteristics of In Situ WC Bundles ? Reinforced Iron Matrix CompositesInfiltration Casting and In Situ Fabrication of NbC Particulates ? Reinforced Iron Matrix CompositesInfiltration Casting and In Situ Fabrication of (Fe,Cr)7C3 Particulates Bundle ? Reinforced Iron Matrix CompositesThe Mechanical Properties of Jute Fiber Mats Reinforced Vinyl Ester Resin CompositesResidual Stresses in Locally Long Fiber Reinforced Aluminum PartsTribological Property of a Triazine Derivative in Rapeseed OilImplementation of Crack Problem of Functionally Graded Materials with ABAQUSTMResearch on Mercury Emissions Regularity and Adsorbing Mercury by Activated Carbon in Coal-fired Power PlantsInterface Bonding Properties of 25Cr5MoA/Q235 Bimetallic Compound ShaftPiezoresistive Properties of Cement Mortar with Carbon NanotubeEffect of Mo2C Content on Microstructure and Composition of Ti(C,N)-Based Cermets Mixing in WaterComparison of Fatty Acid and Antioxidant Property of Pawpaw Coconut Oil and Virgin Coconut OilResearch on Ceramic Matrix Composites (CMC) for Aerospace AplicationsThe Study of Post-Fire Load Bearing Capacity of Steel Column under Axial Compression Exposure to one-Side FireFabrication of Pressureless Sintered ?-Sialon-ZrO2 CompositesStatic and Dynamic Responses of a Composite Engine Mounting StructureSecondary Energy Analysis of Typical Steel Manufacturing ProcessThe Mechanical Properties of Epoxy/ Fiber Composites Influenced by Ageing Effects on CoatingsEffects of Nanoparticles TiN on the Crystallization Behavior of PET NanocompositesCarbon Nanotubes Containing Metal Nanoparticles-Graft-Hyperbranched Polyglycerols NanocompositesStudy of Thermal Properties of Curing of DGEBA Epoxy Resin with Hexakis-(4-Aminophenoxy)-CyclotriphosphazeneThermodynamical Analysis of the Reaction between AlN and ZrO2 and Experimental SubstantiationResearch on Processing Technology of Polyester Fabric Reinforced Polypropylene Thermoplastic Laminated CompositesNew Method of Preparation and Property Study of the Montmorillonite Modified with CTABPreparation and Damping property Study of Styrene-Acrylic IPN/Mt Nano-composite MaterialMicrostructure and Properties of Nano Al2O3-Cu/Cr CompositeMonte Carlo Study on Thermal Transport in Si/Ge Superlattice Basing on Phonon Dispersion DiscrepanciesCertification for Effect of Environment on Composite PropertiesProcessibility and Mechanical Properties of Mullite-Filled Styrene Butadiene Rubber CompositesTheory Calculation of Diffussion Coefficient Based on Molten Slag StructureThe Design for the Main Reaction System of a New Welding MaterialUltrafiltration of Produced Water from Polymer Flooding with Hydrophilized Polyvinylidene Fluoride Membrane for ReuseDispersion and Preparation of Polyurethane/Carbon Nanotubes CompositesDynamic Mechanical Property of Quasi Constrained Layer Structural Piezoelectric Ceramic/Carbon Black/Epoxy Resin CompositesMathematical Model for Evaluating Cylindricity Errors by Minimum Zone MethodMethod on Accelerated Rupture Life Evaluation for Composite Material Based on Type-II Censored DataOptimal Design of Sisal Fibre Reinforced Resin Matrix CompositeControllable Fabrication of d-MnO2 Microspheres and a-MnO2 NanorodsApplication of Coal Mine Comprehensive Monitoring System Based on OPCPreparation and Characterization of Poly(Vinyl Alcohol)(PVA)/Hydroxyapatite (HA) Nanofibrous ScaffoldsPreparation and Characterization of Graphene Nanoplatelet/Magnetite Compound PowdersResearch on the Application of Cement Stabilized Cool Regeneration of the Highway MaintenanceExperimental Study on Continuous Annealing of High-Tensile Cold Rolled Bake-Hardening SteelStudy on Space Copper-Based Powder Metallurgy Friction Material and its Tribological PropertiesInfluence Factors for the Preparation of Kaolinite-Formamide IntercalationAnalysis of Stresses for Cross-Ply Laminates with a Matrix Crack under BendingEffect of Three Catalysts on Synthesis of Silicon Carbide Whiskers with Silica FumeEffects of Gd on Microstructure and Mechanical Properties of AZ61 Magnesium AlloyAnalysis of Break Impact Load on Composite Insulators Used as Tension StringEffect of PA6 Addition on the Mechanical Properties of PMMA BlendsThe Effect of TiO2 on the Mechanical and Tribological Properties of PA66 NanocompositesProgram for the Analysis of Wind-Induced Vibration of Steel Roof StructuresResearch on Crack-Resistance Property of Asphalt Mixture as Road Stress-Absorbing InterlayerThe Distribution of Microstructure and Mechanical Properties of Carbon-Carbon CompositesSpark Plasma Sintering of Mixed and Milled WC-Co Micro-/Nano-PowdersDeformation Behavior of a Multiphase Fine-Grained Mo-Si-B AlloyThe Effect of Injection Molding Process Parameters on the Buckling Properties of PBT/Short Glass Fiber CompositesStudy on the Mechanical Properties and Creep Behaviour of Carbon Fiber Nano-CompositesThe Grain Rotation Behavior of CuY0.8 Nano Alloys in the Process of Plastic DeformationElectrochemical Properties of Polyaniline/a-Zirconium Phosphate Nanocomposite and the Effect of pH ValuesTiC Particulates Prepared by Self-Propagating High Temperature SynthesisElectrochemical Properties of Zinc-LaCoO3 Electrode for Alkaline Zinc-Based BatteryThe Properties of Coarse Grain Heat Affect Zone of Pipeline Steels with Excellent Deformability under Different Welding Heat InputIsotropic Pyrolytic Carbon Fabricated by Developing Self-Heating Plates Chemical Vapor DepositionPreparation and Characterization of N Doped TiO2/ Sepiolite Composite MaterialsSynthesis of [6,7]-Dihydro-[1,4]-Dioxino-[2,3-f][2,1,3]-Benzothiadiazole: A Novel Building Block for Electron-Poor Conjugated Polymers"Experimental Investigation of Impacted and Non-Impacted Composite Laminates under Compressive LoadingFriction Properties of Carbon Nanotubes Reinforced Nitrile Composites under Water Lubricated ConditionMicrowave Modified Timber: Collaborative Research Integrating Product Design for New Materials DevelopmentThe Research of Spraying SiC/Cu Electronic Packaging CompositesProperties of Waterborne Polyurethanes: Effect of NCO/OH RatioComposite Behavior of Concrete Slab with Steel Decking under Flexural LoadingNumerical Simulation Research of Flexible Shield Support Lateral Caving TechnologyEffect of TiO2 on Mechanical Properties and Microstructure of Magnesium Aluminate Spinel RefractoriesPreparation of Ultrafine Cobalt Ferrite Particles by Solution SHS MethodEffects of Amino Acids in the Defined Medium on Cellulose Production by Acetobacter xylinumTwo-Step Green Hydrothermal Synthesis of ZnO PowdersMolecular Dynamics Simulation on Micro Couette Flow of NanofluidsMicrostructural Characterization and Properties of Silica Aerogels Doped with Nano-ITO PowderSolvothermal Synthesis of Mn-Doped CdS Nanorods Using Single-Source Molecular PrecursorsCracking Behavior of Oxide Films under Applied StressMoB/CoCr Coating by Low Pressure Plasma Spraying against Erosion by Molten Al-12.07wt.%Si AlloySpontaneous Oxidation Route to Se/Te Alloys Nanorods at Room TemperaturePreparation of a-Ni(OH)2 with Flowerlike Hierarchical Architectures via Homogeneous Precipitation MethodPreparation of Chrysotile Nanotubes under Hydrothermal ConditionOxidative Dehydrogenation of Cyclohexane over Mg-V-O Catalysts Prepared via Citriate ComplexationA Facile, Green Route - Electron Beam Irradiation to Nanocrystalline Cadmium Selenide at Room TemperatureGrowth of Carbon Nanofibers with Ordered Macroscopic Structures by CVD TechniqueCuO-CoO-MnO/SiO2 Nanocomposite Aerogel as Catalysts Carrier and Its Cocatalysis Mechanism in the Synthesis of Diphenyl CarbonateThe Research of Nanophotonic Grating Vertical CouplingHierarchical Structures of Silicon Oxynitride Nanowires Formed by a Gallium-Catalyzed In Situ Reactive TechniqueSynthesis of MnWO4 Nano-Particles by Low-Temperature Molten Salt MethodEffect of Particle Size on Oxidation Reaction Kinetics Parameter of Cu2O PowdersSynthesis of Nano-Crystalline Magnesium Chromate Spinel by Citrate Sol-Gel MethodSynthesis of Nanocrystalline InVO4 by Hydrothermal Process and its Visible-Light Photocatalytic ActivityPreparation of TiO2 Nanocrystalline Powder with High Specific Area Using Urea as the TemplateMorphology of ZnO Controlled by Anion of Simple Zinc SaltMicrowave-Assisted Preparation of Cu2O Octahedral MicrocrystalsOrganic Soft Template Method to Arrange Palladium Nanoparticles on Single-Walled Carbon NanotubesNovel Mechanochemical Synthesis of Carbon Nanomaterials by a High-Speed Ball-MillingComparison of Precipitants in Preparing Ultrafine ZnO PowderStep-Scan DSC Study on the Melting Behavior of Polypropylene/Attapulgite NanocompositesSynthesis of Polystyrene-B-Poly(Ethylene Oxide)monomethyl Ethermethacrylate Block Copolymers and its Self-Assembly in Aqueous SolutionBatch Supercritical Hydrothermal Synthesis of CeO2 NanoparticlesEffects of Anion on the Morphologies of ZnO Synthesized by an Aqueous Solution MethodResearch on Pollution-Free Separation of Wheat Straw Cellulose by Ethanol/Acetic Acid Solvent SystemEffects of Synthesis Parameters on Controllable Growth of Highly-Ordered TiO2 Nanotube ArraysInvestigation of Morphology of Vetier (Vetiveria zizanioides) Cellulose Micro/Nano Fibrils Isolated by High Intensity UltrasonicationEnhancement of Thermal Conductivity with Carbon-Encapsulated Copper Nano-Particle for NanofluidsSelective Oxidation of Cyclohexane to Cyclohexanone and Cyclohexanol over Au/Co3O4 CatalystDispersibility of Nano TiN Powder in Ethanol LiquidElectronic Transport Properties of the Azobenzene-Based Optical Molecular Switch with Different SubstituentsResearch on Solvothermal Synthesis of Phase Composition Controllable Nanocrystalline TiO2 PowdersImprovement of Tribological Behaviour of Biomedical Nanocrystalline Titanium by Magnetron Sputtered CNx/SiC Double Layer FilmsSonochemical Synthesis of Nanocrystalline MgSeO3 and its Photocatalysis BehaviorPeriodic Changes Effects of Distance between Magnetic Barriers on Electron Transport in NanostructureFabrication and Characterization of YAG Nanopowders by Co-Precipitation under Ultrasonic RadiationThe Characteristics of Natural Occurred Carbon Nanotubes - from Transmission Electronic Microscopy and Raman SpectroscopyMicro-Stress Transfer of CNT and CNT-Interface in CNT Reinforced Mg-Matrix CompositesExperimental Research on the Relationship between Dielectric Constant and Compressive Strength of Cement Concrete MaterialsMicrostructure and Magnetic Behavior of One-Dimensional Co0.5Zn0.5Fe2O4 NanofibersMicrowave-Assisted Synthesis and Photocatalytic Activity of Quantum-Sized ZnOSimulation of Electron Transport in Silicon using Monte Carlo MethodCharacterization and Electrochemical Properties of Nitrogen-Doped Ordered Microporous Carbons Containing Well-Dispersed Platinum NanoparticlesPreparation of Ultrafine ZnO Powder by Precipitation MethodThe Microstructure and Mechanical Properties of ZrAlN/Cu CoatingSol-Gel Synthesis and Characterization of Silica Materials Using Surfactant-Like Organic Acid Compounds as TemplatesComparison of Reactively Sputtered HfO2 and HfSixOy Dielectrics for High Density Metal-Insulator-Metal Capacitor ApplicationsControlled Synthesis of Hollow TiO2 Nanospheres Templated by Polymeric Micelle with Core-Shell-Corona ArchitectureEffect of Nano-Graphite on Friction Performance of Cu-Based Friction MaterialSynthesis and Catalytic Properties of FeZSM-35 Zeolites Directed by Alkyl-polyamine Triethylene-tetramineInfluence of Rolling Reduction Ratio on Continuous Confined Strip Shearing Deformation Procedure Using Finite Element AnalysisMorphology and Properties of Carbon Nanotubes Modified EpoxyGas-Electrospun Degradable PEG/PBT-HA: Potential Scaffold for Tissue EngineeringResearch on Fault Diagnosis System for Mine HoistBayesian Network Learn Method for Machine Tool Thermal Stability ModelingSynthesis and Catalytic Property of V-MCM-41 Mesoporous Molecular Sieves by Atrane RouteCharacterization and Thermal Properties of the Microencapsulated PCM SlurryStudy on the Preparation of Ultramicro Molybdenum Nitride Powder and Wear Properties of Its CoatingCharacteration of Protein Loaded Chitosan Nanoparticles at Different pH ValuesGrowth and Photoluminescence Properties of ZnO MicrorodsSynthesis of Nanocrystalline Silver by Warm-Vacuum-Compaction MethodMultidisciplinary Design Optimization Method and Algorithm Based on iSIGHTPreparation of Spheric and Hollow TiO2 Electrophoretic NanoparticlesPreparation of TiO2 Films on Quartz Glass Plate and Its Study of Photocatalytic Properties in UltrasoundPreparation And Photoelectric Properties Of CuCr2O4 NanopowdersInvestigation of Ultrasonic Electroplating Ni-P Coatings on Nd-Fe-B Permanent MagnetEffects of Fly Ash Particle Sizes on the Compressive Strength and Fracture Toughness of High Performance ConcreteAntioxidative Activity Evaluation of CoQ10-Nanostructured Lipid CarrierMicrostructure and Tensile Properties of Ultrafine Grained Pure Al Sheets Produced by Accumulative Roll BondingExperimental Study on Strengthened Bridge Structures with Carbon Fiber PlateResearch on Tribological Properties of Serpentine Particles as Lubricating Oil AdditivesSynthesis of H-In2O3 and C-In2O3 by Different Methods and Gas Sensing PropertiesSynthesis of C60-Doped Polyaniline NanoshuttlesFacile Solvothermal Route to Synthesize Indium Tin Oxide Nano-Plates, Nanoparticles and NanorodsEffect of Magnesium on Characteristics of Thermal Analysis Curve of Compacted Graphite IronThe Influence of Critical Turning Point of Argon Flowrate Ascension on Decarburization Rate of RH Treatment for Ultra-Low Carbon SteelResearch on Key Technologies of 38CrMoAl Steel Produced by BOF-LF-RH-CC ProcessExperimental Study of Softening and Melting Properties on Indonesia Vanadium-Titanium SintersResistance Matrix of Micro-Carbon Steel Rolled in Ferrite RegionDetermination of IMC-80BH Corrosion Inhibitor Concentration and Practical Application in Gas FieldEffect of Cooling Rates after Finish Rolling on Microstructure and Properties of Microalloyed Steels Used for Fracture Splitting Con-RodsThermodynamic Analysis on Precipitation of Nonmetallic Inclusions in Gear SteelFabrication of Electroconductive Si3N4?TiN Ceramic from Iron Ore TailingPhysical Modeling of Fluid Flow Characteristics in a Delta Shaped, Four-Strand Continuous Casting Tundish with Different Flow Control DevicesMinimum Al Content for Forming Alumina Scale on Creep Resistant Ferritic Steels at 650 ?CEffect of Austempering Temperature on Microstructure and Properties of Carbidic Austempered Ductile IronThe Research on Long Life for Top and Bottom Combined Blown Converter on Semi-Steel SteelmakingSEM In Situ Investigation on Fatigue Cracking Behavior of X80 Pipeline Steel with InclusionsThe Effect of Large Reduction on the Microstructure and Properties for As-Hot Rolled Dual-Phase Nb-Bearing SteelResearch On The Requirement Of Impact Toughness For Petroleum Drill Pipe Steel Used In Critical Sour EnvironmentInfluence of Titanium Compounds on Melting and Crystalline Temperature of Mold PowderResearch of Transverse Corner Crack and Optimization of Concasting Process for Bloom of Peritectic Steel Q235DStudy on Mechanical Properties of Ribbed Cast Steel Spherical Joint in Complex Stress StateEffect of Ce on the Mechanical Properties of 1Cr18Mn8Ni5N Stainless SteelStudy of Scale Effect on the Iron Oxide ReductionStudy on Effect of Pulse Electric Field on Solidification Process of Fe-C-S Alloy MeltEffect of Slag-Metal Reaction on Transformation of Al2O3 inclusions in Pipeline SteelFatigue Crack Propagation Analysis of X60 Pipeline Steel Pipelines with DefectsBF Charge Reduction with Gases of Different H2 Ratio in High Temperature ZoneExploiting a Simple Spectrophotometric Method for the Determination of Manganese in High Strength Line Pipe SteelsNumerical Simulation of Temperature in the Freeboard of COREX Melting GasifierFundamental Study on Extracting Vanadium from Vanadium-Bearing TitanomagnetiteEffect of Nb on Microstructure Evolution of Coarse-Grained Heat-Affected Zone with Large Heat Input WeldingPreparation of High Silicon Steel by Pulse Electrodeposition in Molten SaltStudy on the COREX Melter Gasifier Zones Using Temperature GradientEffect of 0.06%Nb on the Microstructure and Mechanical Properties of Mn-Series Low Carbon Air-Cooling Bainitic SteelsAn Iterative Algorithm to Determine Hot Strand Pressures during Continuous Casting of Round BloomsStudy of Mold Fluid Flow on a New Type Nozzle Bottom in Continuous Casting of SteelOptimizing of Flow Control Devices in a Single Strand Continuous Casting TundishResearch on Steelmaking Dust Based on Difference of Mn,Fe and Mo Vapor PressureEffects of Rare Earth on the Impact Toughness of High-Carbon SteelStudy on Thermal Deformation and Recrystallization Behavior of Cu-P Weathering SteelEffects of B-Mg Additive on Metallurgical Properties of Oxidized PelletsStudy of Reduction Characteristic on Microwave Magnetizing Roast of HematiteEffect of Process Parameters on Microstructural Evolution and Grain Refinement in a Low Carbon High Strength Microalloyed Dual Phase SteelStudy of Low Carbon Steel on Microstructe of Slag FilmStudy on the Influence of Inclusion and Void on Fatigue Life of Bearing Steel Using Statistics of Extreme ValuesThree Dimensional Simulations on Stress Distribution and Fatigue Damage Life of Wheel/Rail Contact RegionAdaptive Neural Network Modelling in Fatigue life Prediction under Load History effectsEffect of M/A Constituents on Mechanical Properties of High Grade Pipeline SteelPrecipitation Hardening of Titanium Carbides in Ti Micro-Alloyed Ultra-High Strength SteelStudy on Sulfur Existing Form in SinterExperimental Study on Tundish Flux System for High Al-Containing TRIP Steel?s Slab CastingStudy on Smelting High-Al Cold Heading Steel SWRCH6A Using Single-Slag ProcessEffects of Modification on Stress Field of the Inclusions in Large Rudder Arm Steel CastingMetallographic Analysis of Non-Orientation Silicon Steel W20 in Different Shearing Deformation AreaNumerical Simulation of Nozzle Clogging of Ferritic Stainless SteelInfluence of Sijiaying Iron Ore on the Structure of SinterStudy on Preparation and Characterization of YAG Ceramic Synthesized by Co-PrecipitationPreparation of Fine Ag2WO4 Antibacterial Powders and Its Application in the Sanitary CeramicsPreparation and Characterization of Zircon Ceramic Doped with CeriumPotential Applications of Foam Ceramics in Gas Explosion PreventionThe Effect of Yb2O3 Addition on Sintering of MgO CeramicFabrication of High-Porosity Silicon Nitride Ceramics with Excellent Mechanical PropertiesEffects of Second Phase and Defect on Electrical Properties in Bi0.5Na0.5-xKxTiO3 Lead-Free Piezoelectric CeramicsEffect of Compound Additives of Li2O-B2O3-SiO2 Glass and LiF on the Properties of CaO-Li2O-Sm2O3-TiO2 CeramicsCharacterization and Mechanical Properties of TiN/O'-Sialon Ceramics Prepared from High Titania SlagPreparation of Porous Catalyst Support with Gangue of Bauxite TailingThe Effect of Bending Radius on Thickness Distribution in Hydroforming of Conical-Cylindrical CupsInfluence of Nano-Y2O3 on Crystallization Behavior and Sintering Performance of Fused Quartz Ceramic MaterialsThe Influence of Different Particle Size of Carbon Powders on the Preparation of Porous Silicon Carbide CeramicInfluence of Poling Conditions on the Characteristics of PZT CeramicsPreparation of Porous Silica by Acid Dissociation of Thermally Activated KaoliniteFinite Element Simulation and Experimental Study of the Effect of Cone Angle on Thickness Distribution in Hydroforming of Conical-Cylindrical CupsThe High-Performance of Cerium Doped Sodium Bismuth Titanate Aurivillirs Phase MaterialInfluence of Heat Treatment on Glaze Melting CharacteristicsThe Research on High Pressure Sintering of Mixed Powder ?-Si3N4 and a-Si3N4Function Basis for Mechatronic System DesignEffect of La2O3 on the Microstructure and Electrical Properties of 0.82Bi0.5Na0.5TiO3-0.18Bi0.5K0.5TiO3 CeramicsFormation Mechanism of Porous Silicon Carbide Ceramic Synthesized by Coat-Mix ProcessAs(III) Removal from Low-Arsenic Concentration Drinking Water by Coagulation with Quadrivalent Titanium CoagulantsAlumina Gelcasting by Using Glutin-Urea SystemThe Study of the Oxygen Permeability of Ba0.5Sr0.5Co0.8Fe0.2O3-d Membranes after Laser AblationPreparation of Glass-Ceramics Using Molybdenum TailingsStructural Characteristics and Dielectric Properties of Nd-Doped SrTiO3 Ceramics by Introducing Ti Vacancies for Valence CompensationStructure and Microwave Dielectric Properties of (Ca0.9375Sr0.0625)0.25 (Li0.5Sm0.5)0.75TiO3 Ceramics with B2O3-CuO Sintering AidsInfluence of Different Precursors upon Characterization of Bismuth Titanate Powders Prepared by Chemical MethodsMolten Salt Synthesis of Anisotropic Bi4Ti3O12 ParticlesAnalysis of PZT Piezoelectric Ceramics Based on Finite Element Softeware ADINAPreparation and Dielectric Properties of Li2O Doped BaZr0.25Ti0.75O3 CeramicsPhase Stability and Dielectric Properties of Low Temperature Fired BaTi4O9 Microwave Material with Copper Electrodes in Reducing AtmosphereSynthesis of ZrTiO4 and MgAl2O4 Powders via Non-Hydrolytic Sol-Gel Route Using Alcohol as Oxygen DonorPreparation of High-Purity Titanium by Molten-Salt Electrolysis ProcessResearch on Transient Behavior of Aluminium in Laser Micro-Molton PoolThe Wear and Drag Prediction of the 2D Micro-Asperities on Textured WallEffect of Conventional Cold Rolling on Wear-Resisting Performance of High Manganese SteelA Channelized Deadlock Prevention Policy for Flexible Manufacturing Systems Using Petri Net ModelsMicrostructure Evolution of ZK60M Twin-Roll-Casted Magnesium Alloy during Hot Compression and AnnealingInfluence of Boron on the Micro-Organization Mechanism of Zirconium Containing Aluminium AlloyA Practical and Selective Method for the Analysis of Molybdenum in Grade T91 Tube and P91 Pipe Intended for Power PlantsStudy on Over-Burnt Temperature and Heat Treatment of a New Al-Mg-Si-Cu AlloyStudy on Thermal Simulation of a New Al-Mg-Si-Cu AlloyEffect of Desorption Hydrogen Pressure on Anisotropy of HDDR-Treated Nd-Fe-B PowdersEffect of Y on Microstructure and Corrosion Resistance of AZ61 Magnesium AlloyEffects of the Vibration and Low Pressure on Solidification Microstruction of Zinc-Aluminum AlloyEffects of Anisotropy on the Microstructural Characteristics and Mechanical Behavior of Shock-Loaded of AZ31 AlloyCorrelation of Dynamic Response with Adiabatic Shearing Behavior in Ti?10V?2Fe?3Al AlloyThe Oxidation of Co-10Cr Alloys in 1 Atm of Pure O2 at 700 and 800?CCorrosion of Amorphous Fe73.5Si13.5B9Nb3Cu1 Alloys on the Synergistic Effect of Chloride and Hydroxyl IonsEffect of Er on Ignition-Proof Property of Mg-Zn AlloysPreparation and Characterization of As-Cast and Hot-Rolled Mg-5Al-0.3Mn-1Ce AlloyMicrostructure and Creep Property of As-Cast Mg-6Al-XSr(x=0, 2, 3) AlloysInfluence of Y Element on Microstructure and Mechanical Properties of ZK60 AlloyAnalysis of LIGA-Ni MicrostructureDynamic Deformation Behavior of As-Extruded Mg-Gd-Y Magnesium Alloy and the Microstructural EvolutionMicrostructures of Low Angle Boundaries of the Second Generation Single Crystal Superalloy DD6Influence of Fe on the Formation of Nucleation in Carbon-Inoculated Mg-3%Al AlloyStudy on the Intergranular Corrosion Behavior of Welding Joint of A7N01-T4 Al-Alloy for High-Speed TrainInvestigation on the Microstructure and Mechanical Properties of Hot Forged Mg-8Gd-2Y-1Nd-0.3Zn-0.6Zr AlloyOn the Microstructure of Heat-Treated Austenitic Nickel-Base AlloyStudy on the Law of Phrase Transformation of High-Carbon Matrix Steel 4Cr-3Mo-3V-2WEffect of Cerium on Microstructure and Wearing Resistance of 5CrMnMo Hot Working Die SteelEffect of Thermo-Mechanical Heat Treatment on Microstructure and Mechanical Property of 2197 Al-Li AlloyStudy on the Initial Discontinuity State Distribution of LY12CZ Aluminum AlloyOn the Oxidation Behaviors of MoSi2 at 673 ? 873 KEnhanced Tensile Ductility of AZ80 Magnesium AlloyExperimental Study of Squeeze Casting of ZK60 Magnesium AlloyMaterials with Thermo-Diffusive HardeningInfluences of Complex Modification of RE and P on the Wear Resistance of Hypereutectic Al-24Si AlloyEffect of Melting Process on Zr Content and Grain Refinement in ZE41A AlloySpark Plasma Sintering of Al6061 and Al2124 AlloysEffect of Quenching on the Corrosion Morphology of Al-Zn-Sn-Ga Anode AlloyStudy on Regeneration Ability of Oxidation Film on Ignition-Proof Magnesium Alloy Added with REInfluence of the Strain Rates on Tensile Properties and Fracture Interfaces for Mg-Al Alloys Containing YThe Effects of Cooling Holes on the Creep Life in a Modeling Specimen of Single Crystal Air-Cooled Turbine BladeEBSD Study on Boundaries and Texture of 1235 Aluminum Alloy Affected by Strain RatesEffects of Bi on Mechanical Properties of Magnesium Alloy AZ81Research of Hot Ductility for ML40Cr with Cold Forging SteelStudy on Corrosion Behavior of Al-Zn-In and Al-Zn-Ga Alloys in NaCl SolutionMiscibility Study of Polymer Blends Composed of Polyethylenimine, Polyethyleneglycol, and Carboxymethyl ChitosanStudies on Methyl Methacrylate Grafted onto Chitosan by Ceric Ion InitiationPreparation and Characterization of PMMA-b-PDMAEMA/Polysulfone Composite Membranes by RAFT Polymerization and their Permeation Performance of Carbon DioxideThermalstability of Polyclonal Antibody to Salmonella typhimurium on a Magnetostrictive Sensor PlatformSynthesis and Characterization of Polyesteramides Containing 5-Fluorouracil in the Main ChainEffect of Blending Modification on Tensile Performance of CPE/PVCTwo Step Synthesis of Hydroxyl Group Polyimide Based on 2,2-Bis(Amino-4-Hydroxyphenyl)hexafluoropropaneStructural Characteristics of Pheomelanin-Like Pigment from Lachnum singerianumA Review on Synthesis and Property of Polyurethane-ImidePreparation and Characterization of Polylactic Acid/Acetate Starch Blends with Tetrabutyl TitanateThe Influences of Double Modification on Carbon Fiber Surface and Microorganism Immobilization BehaviorPreparation of Chitosan - Hydroxyapatite NanocompositesBioceramic Hydroxyapatite Granules for Purification of Biotechnological ProductsRelease of Anticancer Drug Doxorubicin from Biodegradable Polymer Coated Porous Hydroxyapatite ScaffoldsMechanical Properties and Ordered Structure of Bacterial Poly(3-Hydroxybutyrate-Co-3-Hydroxyhexanoate) Fibers Stretched after Isothermal Crystallization near TgEffects of Microcrystalline Cellulose on the Thermal Properties of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)Synthesis and Characterization of the Water-Soluble Oleoyl Acetyl ChitosanThermal and Mechanical Properties of Bagasse Microcrystalline Cellulose Reinforced PLA CompositesPreparation and Characterization of Nano-TiO2/PE Antibacterial FilmsAssembly of Type I Collagen on PVA Film Induced by Glutaraldehyde VaporStudy on the Preparation, Property and Drug Release Carrier of Chitosan-Based Nanoparticles for Cancer TreatmentHigh Temperature Resistance of Epoxy Adhesives under the Room-Temperature CuringPreparation and Application of Hydrophobically Associating Cationic PolyacrylamideDirecting Human Chondrocytes Cell Behavior by Fabrication of Protein Micropattern on Polystyrene SurfacesSynthesis of a Glycodendrimer with Five Repeating Mannoside UnitsS-Scan of Ultrasonic Phased Array Testing for Electrofusion Joints of Polyethylene PipesEffect of Cross-Linking Degree on Hydrogels using Surfactant Detergent as TemplateFlame Retardance and Thermal Decomposition of EVA Composites Containing Melamine Phosphate and DipentaerythritolThe Effect of Triton? X-100 on CNT/PP Composite?s Electrical ConductivityPreparation and Properties of PS/PSEG Composite MaterialsThe Synthesis and Characterization of Thiophene Derivative PolymersImprinted ?-Cyclodextrin Polymer for Recognition of NaringinEffect of Peroxide Content on Morphology and Properties of Thermoplastic Vulcanizates Based on PP and NRSynthesis of Carbazoled Poly(Arylene Imino)Synthesis of Poly(Aryl Sulfone Benzimidazole) SulfoneAnalysis of Performance of PR.S Asphalt Mixture and ApplicationPoly(Ethylene Oxide)-B-Poly(e-Caprolactone) Amphiphilic Block Copolymers: Synthesis and Self-AssemblyStudy on Preparation and Properties of Polystyrene/Styrene-Ethylene/Butylene-Styrene CompositesStudies on the Solubility of Bonded-Rare Earth Complexes and Fluorescence Properties of their CopolymersSynthesis, Characterization and Isothermal Crystallization Kinetics of Poly(Dodecamethylene Terephthalamide)Synthesis and Properties Epoxy Resin/Mesoporous Silica-Organic Clay NanocompositesUltrafine Pd Nanoparticles Synthesis and Catalytic Performance in Methane Partial OxidationIsothermal Crystallization Kinetics of Poly (Phenylene Sulfide)/TiO2 CompositesSynthesis and Characterization of Glucose and Acrylamide CopolymerThermal Degradation Kinetics of Poly(Arylene Ether Nitrile) and its Crosslinked PolymerEffect of Amphoteric Acrylic Retanning Agent on the Physical Properties of the Resultant LeatherResearch on Al2TiO5-Si3N4 Composites Fabricated by Reaction MethodEffect of Calcium Stearate Concentration on Cure Properties of Epoxidized Natural RubberStatic and Dynamic Mechanical Properties of Chlorobutyl Rubber Composites with Variable Sulfur/Accelerator RatioResearch on Properties of Liquid Crystalline Polymers as New Packaging MaterialsResearch Development on Heating System of EVs Battery PackExperimental Study on the Anti-Permeability Properties of Polymer Grouting MaterialsPreparation and Magnetic Properties of the Core-Nanoshell Composite Materials Doped with NdPreparation of a Certified Reference Material of Trifunctional Polypropylene OxideMechanism of the Modulus Increase of Carbon-Black-Filled Rubber at Small ExtensionFinite Element Analysis and Optimization of Spreading System of Rapid Prototyping Machine for Ceramic Parts Based on ANSYSPreparation and Performance of Polyethylene Glycol / Polyacrylamide Phase Change MaterialElastic Properties and Electronic Structure of L12 (Al,Si)3ScEffect of Surface Treatment for Carbon Nanotubes on Morphological and Rheological Properties of Polyarylene Ether Nitriles NanocompositesModeling Radial Variation in Microfibril Angle of Scots PineLight Yield Non-Proportionality and Energy Resolution of Lu1.8Y0.2SiO5:Ce and LaCl3:Ce Scintillation CrystalsComparison of Lu0.7Y0.3AP:Ce and Bi4Ge3O12 Scintillators in Gamma Ray SpectrometryThe Surface Characteristics and Friction Properties of PTFE YarnStudy on the Influence of Rheological Properties on the Printing Quality of InkThe Effect of the Proportion of Prepolymer and Monomer on the Performance of UV Offset InkInduced Amorphization in Pyrographite by Radiation Using High Voltage Transmission Electron MicroscopeElectronic Structure of CdSe/CdXZn1-XS Core/Shell Quantum DotsFactors Influencing Dye ColorsThe Spin-Dependent Electronical Conductivity of Polarons in the Spin Polarized Organic SemiconductorNumerical Study on Characteristics Shock Initiation of Double-Shell Charges by Hypervelocity ImpactTraveling Wave Exact Solutions for Nonlinear Coupled Scalar Field EquationsA Method of Reducing Volatile Compounds in Polypropylene Packaging MaterialsLu1.8Y0.2SiO5:Ce and LaCl3:Ce Scintillators for Gamma-Ray DetectionA Study on the Photolysis Behavior of Photoacid GeneratorsHigh-Efficiency Modified Alkyd Resin Application ResearchInvestigation on Direct Electrolytic Reduction of the CaTiO3 Compounds in Molten CaCl2-NaCl for the Production of TiCapacitive Performance of Ordered Mesoporous Carbons in Ionic LiquidsStudy on Character of Ilmenite Modified by Thermal TreatmentCorrosion-Deformation Interactions (CDI)of AA2024-T3 in Chloride MediaCO2 Adsorption Performance of N-Doped Ordered Microporous Carbons Templated from Zeolite HYPreparation Research of CaB6 Powder by Self-Propagating High-Temperature SynthesisStudy of Synthesis and Properties on Poly L-Glutamate Initiated by AnilineStudy on the Electrochemical Behaviors of CeO2 in Eutectic CaCl2 ? NaCl MeltStudy on the Chemical Constituents of Apocynum venetum BarkExperimental Study on the Fire Characteristics of Indoor Combustible MaterialsStudy on Recovery of Vanadium from Low-Vanadium Slag by Calcified Roasting MethodsElectrochemical Behavior of Tubular Steel Corrosion in Brine Containing High Contents of H2S and CO2Characteristics of Calcium Carbonate Crystal Structure and Size Distribution in Solution under the Electromagnetic FieldSol-Gel Synthesized Fe-P-O Catalyst for the Benzylation of Benzene with Benzyl ChlorideDirect Electrochemical Preparation of Chromium Powder in Molten SaltsSynthesis and Photoluminescence Properties of Hierarchical Bis(8-Hydroxyquinoline) Nickel Flower-Like StructureIdentification of White Light Emission with Two Complementary Colors in Organic Light-Emitting DevicesStudy on Phase Composition of Long Persistence Phosphors SrAl2O4:Eu2+,Dy3+Synthesized by Combustion Synthesis MethodAnalyses of Transmission Characteristics of a Magneto-Optic Material Used for Faraday Optical Filters at 532nmAnalysis of Recovery Current Related to Core Material and Structure of DC Power Supply in High Voltage Active Electronic Current TransformerPreparation of Ta-Ti Co-Doped VO2 Polycrystal Thin Film with High Resistance Temperature Coefficient and without HysteresisComparative Study of the Properties between Transparent Conducting ZnO:Zr and ZnO:Al Films Deposited by DC Magnetron SputteringPreparation and Corrosion Resistance of Electroless Plating of Ni-Cr-P/Ni-P Composite Coating on Sintered Nd-Fe-B Permanent MagnetX-Ray Photoelectron Spectroscopy of (La0.7Sr0.3)MnO3Thin Films Prepared by Pulsed Laser DepositionNovel Terbium-Cerium Coordination Polymer: Synthesis, Characterization and Fluorescence PropertiesElectrical Behaviors of LEDs Prepared by Wide-Band GaN MaterialMicrostructure, Magnetic and Optical Properties of Metal/ Semiconductor Magnetic Granular FilmSynthesis and Properties of 1,4-Bis(2'-Aryl-1',3',4'-Oxadiazole)-1,3-Butadiene and its AnaloguesEffect of Alkali Hydrogen Peroxide Pre-Extraction on APMP Pulping Process of Pink Sheets BambooBifunctional Fe3O4@SiO2@Eu-Polyoxometalates Nanoparticles and Study on their Magnetism and LuminescenceA Lead Free Graphite Conducting Paste for Screen PrintingStudy on the Electro-Optcial Properties of GH LCDA New Photochromic Diarylethene for Reversible Molecule Switching Properties Based on Pyrrole and ThiopheneSaint Venant Solutions in Symmetric Deformation for Rectangular Transversely Isotropic Magnetoelectroelastic SolidsThree-Dimensional Optical Bit Memory in Sm(DBM)3Phen-Doped and Un-Doped Poly(methyl methacrylate)Investigation of V Residence in Sr2(Fe1-XVX)MoO6 CompoundsMn3+ Ion Co-Doped in Y3Al5O12Ce3+ Phosphor to Enhance the Red Spectral EmissionThermoelectric Properties of Cu-Substituted Bi2Ca2Co2Oy Misfit OxidesPreparation of Manganese Ferrite Powders by Mechanochemical ProcessElectrochemical Deposition Mechanism of Polyaniline at High Potential in Organic ElectrolyteResearch on Photoluminescence Characteristics of the Active Cl-Doped ZnSMicrostructure of In Situ Al3Ti0.4Zr0.6p/Al Fabricated with Electromagnetic FieldChiral Liquid Crystal Polymers Containing Electron Donor- Acceptor Action-Synthesis and CharacterizationStructures and Electronic Spectroscopy of Rhodium-Based Complexes: a Theoretical Study on Promising Optical MaterialsPreparation of Polymethyl Methacrylate-NaYF4:Yb:Er Composite Material Used for Holographic DisplayDielectric Properties Investigation of Mg-Doped Barium Titanate CeramicsImprovement of Giant Magneto-Impedance Effect in Fe-Based Nanocrystalline WiresGrowth of KNbO3 Crystal by a Pulling down MethodImprovement of Magnetic Properties of La3+-Co2+ Substituted SrFe12O19Reduced-Pressure Melts Growth of the Vacuum Ultraviolet Double Frequency Crystal KBe2BO3F2 (KBBF)A New Structure of the 2D Photonic Crystal Microcavities with Hexagonal LatticeComposition and Properties of Phosphate CementMCM-41 Anchored Manganese Salen Complex as Catalysts for Cyclohexene OxidationTiAl Alloy Spark Plasma Sintered from Mechanically Activated PowdersResearch and Application of Lost Foam Technology of Goods Train Low-Carbon Alloy Steel CastingThe Analysis of Toy Design Factor for Customer Loyalty in TaiwanEffect of Deformation on the Austenite to Pearlite TransformationAnalysis of Microstructure of Phosphate CementThe Effect of PTFE on the Mechanical and Friction and Wear Properties of GF/PA6 CompositesCatalytic Application of H4SiW12O40/SiO2 in Synthesis of Acetals and KetalsFriction and Wear Properties of Carbon Fiber Reinforced Polypropylene CompositesStudy on Mechanical Properties of Polyurethane Elastomers for Drum ScraperHeat Treatment of Heavy Forgings with diameter 1700mmStudy on the Interaction of Fluorescent Probe 2-(2'-Chloro Phenyl)-5-(2'-Hydroxyl Phenyl)1,3,4-Oxadiazole with DNAPreparation and Properties of PVA/PAAm IPN Hydrogels-Copper Nanoparticles NanocompositesCatalytic Activity of SWNTs/Pd Catalyst in Suzuki ReactionForce Calculation of Cycloid Gear at Three Supporting Points Of Gear Pin for Speed Reducer with Three Cycloid GearsPreparation of Nano Ti3SiC2/MoSi2 Composite by SPS ProcessPreparation and Application Performance Study of High Purity MontmorilloniteThe Influence of Factors on W/Mo Bimetal Compound PressingInvestigation on Denitrogenation Technology and Mechanism during VIM Refining Ni-Base SuperalloyResearch on Test about Stress Corrosion Cracking of SPV50Q Spherical TankThermo-Sensitive Materials for the Time-Temperature IndicatorDesign for a Type of Vertical Rotary and Adjustable Magnetorheological RheometerHydrothermal Synthesis and Characterization of Fe-Doped Na0.5Bi0.5TiO3The Research on Aeroelasticity of the Vehicle Wing SurfaceFault Diagnosis to a Rolling Bearing in a Blowing Machine Based on the Theories of EMD and Intrinsic Modal Energy EntropyPrediction of Heat Distribution Shape and Nozzle Diameter of Plasma Arc CutterAnalysis of the Influence of the Heat Input and Bead Volume on HAZ Hardness for Submerged Arc Welding Process of Mild Steel Plates3rd Degree Mathematical Model Appropriate for Parametric Estimation of SAW ProcessPrediction of Temperature Distribution on Submerged Arc Welded Plates through Gaussian Heat Distribution TechniquePrediction of HAZ Width of Submerged Arc Welded PlatesThe Parametric Modeling for Die Base in SolidWorksResearch for CNC Machine Tool Servo System Fault Diagnosis Expert SystemFracturing Mechanism of Marine Gas Hydrate with Vibration and Model of Experimental DeviceThe Enrichment Regularity of Rare Earth Elements and Resource Characteristics in Polymetallic Nodules/CrustsStudy on Missile Thick Wall Temperature Calculation for Aerodynamic HeatFriction/Wear Properties of Magnetron Sputtered TiB2-TiN Composite Films on Biomedical Metallic Titanium AlloyReliability Optimization Design of Gear BoxA New Coagulant for Spilled Oil Removal with Bentonite and Calcium Chlorine and SawdustThe Study of Projectile Penetration into Aluminum Armor PlateInvestigation on Flexural Performance of RC Beams Flexurally Strengthened by Soffit-Bonding and Side-Bonding CFRP Sheets