Engineering Plasticity and Its Applications

An Internal Variable Approach to Inelastic Deformation Including Structural SuperplasticityMechanics of Carbon Nanotubes: A Continuum Theory Based on Interatomic PotentialsPlasticity-Related Microstructure-Property Relations for Materials DesignDiscrete Dislocation Modeling of Plastic Flow ProcessesNanoindentation-Induced Collective Dislocation Behavior and NanoplasticityAnalyses of Cavitation Instabilities in Ductile MetalsThe Effect of Heating Rate on the Formability of Bulk Metallic Glass in a Supercooled Liquid RegionInvestigation of the Dynamic Buckling in the Carbon Nanotube under Impact TorqueDeformation Behavior of Dual-Phase LTSP Ti3Al Based AlloyEvaluation of Adhesive Properties of Arc PVD Coatings on Non-Nitrided and Nitrided Various SubstratesMechanical Alloying of Ti-Al-Si-C Powders, their Thermal Stability, Phase Evolution, and Synthesis and Deformation of In Situ Produced Titanium Aluminide CompositesHigh Temperature Deformation Behaviour of a New Magnesium AlloyMicromechanical Study on High-Temperature Behavior of ZrO2 Particle-Dispersed Ni CompositesEvaluation of Strain Concentration in Carbon Nanotube with Bend JunctionHigh Strain Rate Deformation Behavior of Mg?Al?Zn Alloys at Elevated TemperaturesMechanical Properties of Bulk Glassy Metal after Deformation under High Temperature ConditionsEffects of Strain Rate and Temperature on Yield Locus for AZ31 Magnesium Alloy SheetElastoplastic Behavior of Particle Reinforced Composites Considering the Effect of Interfacial DebondingInelastic Behaviour of Concrete/Steel Composite Beam in FirePossible Approaches in Modelling Rearrangement in a Microstructured MaterialProposal of Various Connecting Methods of Fiber Strands and Finite Element Method Analysis of StrengthRate-Dependent Off-Axis Tensile Behavior of Cross-Ply CFRP Laminates at Elevated Temperature and Simulation Using a Viscoplasticity ModelEffects of Stacking Sequence on Notched Strengths of Cross-Ply CFRP Laminates and Analysis Using a Cohesive Zone ModelA Modified Kinematic-Hardening Viscoplasticity Model for Off-Axis Creep Behavior of Unidirectional CFRPs at High TemperatureEvaluation of the Interfacial Properties in Polymer Matrix Composite: Experiments and Elasto-Plastic Shear-Lag AnalysisHigher-Order Stress due to Self Energy of Geometrically Necessary DislocationsForming Limits Prediction of FCC Sheet Metal Adopting Crystal PlasticityHigh Density Bands of GN Dislocations Formed by Multi Body Interaction in Compatible Type Multi Crystal ModelsDependence of Localized Deformation on Point Defect Development Caused by Intersected Cross Slip among DislocationsCrystal Plasticity Analysis of Dislocation Accumulation in ULSI Cells with Consideration of Temperature Dependence of the Lattice Friction Stress for SiliconMultiscale Modeling and Simulation of Crystal Plasticity Based on Dislocation Patterning in PolycrystalEffects of Crystallographic Texture on Plastic Flow LocalizationNew Physical Interpretation of Incompatibility and Application to Dislocation Substructure EvolutionInspection and Model Experiment of a Damaged Arch BridgeDestructive and Ultrasonic Investigations of Damage Development in Metallic MaterialsContinuum Damage Model of Creep-Fatigue Interaction in Ni-Base SuperalloyElastic-Plastic Deformation of Perforated Sheets with Randomly Distributed HolesTensile Mechanical Properties of AM50A Alloy by Hopkinson BarDynamic Tensile Characteristics of TRIP-Type and DP-Type Sheets for an Auto-BodyElastic-Plastic Dynamic Response of the Tube with Free Boundary Condition Subjected to ImpactCounterintuitive Dynamic Behavior in Elastic-Plastic StructuresEvaluation of Dynamic Behaviors and Damage Mechanism of Ancient Timber ArchitecturesThe Effect of Strain Rate on the Material Characteristics of Nickel-Based Superalloy Inconel 718A Dynamic Damage Model for Uniaxial Compressive Response of AD90 AluminaThree Modes of Penetration Mechanisms of A3 Steel Cylindrical Projectiles Impact onto 45 Steel PlatesOn Dynamical Systems at the Portevin-Le Chatelier EffectPeriodic Motions and Bifurcations of a Plastic Impact MachineImprovement of Measurement Accuracy of Non-Coaxial Hopkinson Bar MethodDeformation and Failure Behaviors of PC/ABS (50/50) Blends under ImpactFinite Element Analysis of Alternate Hard and Soft Multi-Layers under Circumscription LoadingDevelopment of Stereolithography Simulation Process Based on the Dynamic Finite Element MethodThe Elasto-Plastic and Geometrically Nonlinear Finite Element Model of Space Beam Considering Restraint TorsionAn Elasto-Plastic Finite Element Simulation of the UO-Tube Processes of Sheet MetalSolid Shell Element and its Application in Roll Forming Simulation3-D Finite Element Simulation of Pulsating T-Shape Hydroforming of TubesAutomatic Approach on Derivation of Loading Path Using Adaptive Finite Element Analysis Simulation MethodThree-Dimensional Numerical Manifold Method Based on Hexahedron Element with Full First-Order Cover Function and its Application in Underground ExcavationDevelopment of PC Cluster Parallel Processing Scheme of 3-D Rigid-Plastic Finite Element Method Using Diagonal MatrixNumerical Investigation of Flexural Properties of Sheet Metals Subjected to Embossing and Restoration ProcessDynamic Indentation and Penetration Properties of Aluminium FoamsThe Dependence of the Energy-Absorption Capacity of Metal Hollow Sphere Materials on their Relative DensityDynamic Mechanical Behaviors of Aluminium Foam Filled Circular Tubes under Transverse Compressive LoadConstitutive Relation of Open-Celled Metal Foams Based on the Mesoscopic Behavior of Random CellsDevelopment of 3-Dimensional Compression Device and its Application to Clarification of Densification Behavior of Urethane-FoamCompressive Properties of Porous Metals with Homogeneous Pore CharacteristicsModeling of Fretting Wear Based on Cumulative Plastic Strain and Saturated Shear StressA Gray Prediction Model for Unequal-Interval Time Sequence and its Application in Creep Fracture MechanicsEstimation of Hysteretic Energy of MDOF Structures Based on Equivalent SDOF SystemsThe Static and Dynamic Fracture Test of X70 Pipeline SteelFracture Parameters on Three-Dimensional Sliding Mode FractureInterfacial Cracks of Antiplane Sliding Mode between Usual Elastic Materials and QuasicrystalsCombined Adaptive Finite Element Method and J-Domain Integral Technique for Crack ProblemsInvestigation on a Mn-Ti High Strength SteelMechanics Analysis on Bar Cutting Based on High Speed and Restrained StateFracture Properties of Softwood under Mode I Loading Perpendicular to the GrainA Study on the Application Infrared Thermography Camera for the 7FA Gas Turbine Blade Covering Crack DetectingEffect of Pitting Corrosion on Ultimate Strength of Web Plates Subjected to Shear LoadingOptimum Performance of High Tension Steel Sheets under Various Heat Treatment ProcessIncrease of Stress Intensity near Free-Edge of Elastic-Creeping Bi-Material Interface under a Sustained LoadInfluence of Tensile Pre-Strain on the Torsional Fatigue Crack Behaviors of a Structural SteelCharacteristics of Complementary Plastic Energy Produced by Hysteresis Curves and Analyses of Microstructures in Fatigued MetalsEffects of Roller Working and Ion Nitriding on Fatigue Properties of Eutectoid SteelEffect of Additional Shear Strain Layer on Microstructure and Tensile Strength of Fine WireEBSD-AFM Hybrid Analysis of Crack Initiation in Stainless Steel under Fatigue LoadingEffect of Mean Stress on Fatigue Strength of Short Glass Fiber Reinforced PolybuthyleneterephthalateEffect of Plastic Working on Pulsating Fatigue Strength of Notched SpecimenEvaluation of Fracture Surface of 11/4Cr-1/2Mo Steel by Residual Magnetization Induced from Inverse-Magnetostrictive EffectTechniques for Determining Mechanical Properties of Power-Law Materials by Instrumented Indentation TestsMicro-Indentation of Metal Matrix Composite - An FEM InvestigationPlasticity Characteristics of Beta Titanium Alloy Obtained Using Depth-Sensing Nano-Indentation TestA Numerical and Experimental Analysis on the Forming Limit of AA 3105 Aluminum Alloy in Radial Extrusion ProcessFormability Evaluation of Coated and Uncoated Steel Sheets with Consideration of Frictional CharacteristicsEffect of the Surface Defects on Hydroformability of Aluminum AlloysPreform Design for Formability Enhancement of Tube Hydroforming Process Using Deformation HistoryFormability of Al6061 Extruded Tube in Warm HydroformingFormability of Roll Cast Recycled Aluminum AlloyComputer Aided Simulation of the Rheology Forging Process for Aluminum Alloys and its Experimental InvestigationTexture Evolution and Grain Refinement in AA1050 Aluminum Alloy Sheets Asymmetrically Rolled with Varied Shear DirectionsAdaptive Simulations of T-Shape Tube Hydroforming ProcessesModel Building of Finishing Temperature Control for Accelerative Hot Strip RollingNumerical Simulation of Warm Deep Drawing of AZ31 Magnesium Alloy Sheet with Variable Blank Holder ForceDeformation Analysis of Co-Extrusion Process of Aluminum Alloy and Copper AlloyForming Load Characteristics of Forward and Backward Tube Extrusion Process in Combined OperationA Study on the Pressure Distribution along the Powder-Die Interfaces in Powdered Metal Compaction ProcessKnowledge Discovery and Management from Numerical Simulation and its Application to Robust Optimization of Extrusion-Forging ProcessingEvaluation of Hole Flangeability of Steel Sheet with Respect to the Hole Processing ConditionStudy on Metal Forming by Macro-Micro Combine Numerical AnalysisAn Experimental Study on the Friction Characteristics in Tube Hydroforming ProcessPass Schedule of Wet-Wire Drawing Process with Ultra High Speed for Tire Steel CordNumerical and Experimental Approach for Rectangular Cup of Li-Ion Battery Container with Extreme Aspect RatioFlow and Temperature Analysis of Molten Pool in Twin-Roll Strip Casting ProcessOn-Line Optimization of Coiling Temperature Control on Run-Out Table for Hot Strip MillsMechanics of a Special Asymmetric Rolling of Thin StripAnalysis of the Process of AA-6201 Feedstock Using Continuous Casting and ExtrusionWeb Based Shape Inspection System for the Forging Products Having Complicated ShapesThe 3D Modeling of Dies Based on UG and Numerical Simulation of the Heat Rheological Forming of Titanium Alloy Vane DiskUpper Bound Solution to Compression Forming of Three-Layer Bounded Clad SheetHot Forging Comparative Analyses by Using a Combined Finite Element MethodEffect of Tool Modeling Accuracy on Sheet Metal Forming SimulationResistance Heating Characteristics of High-Strength Steel Sheet Blank for Hot Press FormingProtection against Slippage between Roll and Material in the Rolling of LumberIncrease of Wall Thickness around Corner of Multi-Stage Drawn Cup with Flange Using Conical PunchesReduction of Stages in Multi-Stage Metal Forming Process Based on Numerical Optimization in Conjunction with FE SimulationOptimum Design of Forming Sequence of One-Piece Automobile Steel Wheels without Welding Using Finite Element SimulationModelling of Dynamic Recrystallization in Hot WorkingA Thermodynamically Consistent Eulerian Description of Finite ElastoplasticityLong Term Creep Analysis of Pipe Bends in a Steam Transfer Line at Elevated TemperatureQuantitative Description of Microscopic Plastic Deformation of Polycrystalline Aluminum Using Laser-Scanning MicroscopeModeling of Large-Strain Cyclic Plasticity for Accurate Springback SimulationConstitutive Modeling for Uniaxial Time-Dependent Ratcheting of SS304 Stainless SteelDynamic Strain Aging during the Plastic Flow of MetalsCalibration of Texture-Adjusted Strain-Rate Potential and its ApplicationEffect of Texture on High Temperature Deformation Behaviors of Ti-6Al-4V AlloyPlasticity as a Lifesaver in the Design of Cardiovascular StentsPlasticity in the Mechanical Behaviour of Cardiovascular Stents during Stent Preparation (Crimping) and Placement (Expansion)The Influence of Cladding on the Springback of 2024-T3 Aluminium AlloyRatchetting and Creep Deformation of Solder AlloysPlastic Flow Joining by Shot PeeningRelationship between Phenomenological Constitutive Model and Dislocation Structure in Cyclic Plasticity of Austenitic Stainless SteelSimulation of Inelastic Deformation and Thermal Mechanical Stresses in Twin-Roll Casting Process of Mg AlloyPlastic Behavior of Polycrystalline Aluminum during Biaxial Compression with Strain Path ChangeElasto-Plastic Deformation around Neighboring Holes in Solid Metal under Biaxial CompressionPlastic Deformation Behavior of High Strength Steel Sheet under Non-Proportional Loading and its ModelingAn Anisotropic Constitutive Model for a Directionally Solidified SuperalloyImplicit Stress Integration for High-Temperature Inelastic Constitutive Models Using LinearizationProcessing Conditions and Mechanical Properties of Fine Grained Mg by Equal Channel Angular PressingComparison of Age-Hardening Characteristic in Thixo-Cast and Rheo-Cast T5-A356 Alloys by Nanoindenter and AFMExperimental Study on Mechanical Energy Hysteresis in Nano Colloidal Damper Using Porous Silica ParticleThermal Imprint Process of Parylene for MEMS ApplicationsGrain Refinement and Strengthening of a Cylindrical Pure-Aluminum Specimen by Using Modified Equal-Channel Angular Pressing TechniqueFatigue Damage Mechanism of Nanocrystals in ECAP-Processed Copper Investigated by EBSD and AFM Hybrid MethodsMolecular Dynamics Simulation on Crack Initiation at Bi-Material Interface EdgesA New Method for Stress and Deformation Analysis from Nano to Macro Dimensional ScalesStudy on Nanolithography Process of Polycrystalline Copper Using Molecular Dynamic SimulationMolecular Dynamics Analysis on Initial Texture and Processing Route Influences on Grain Refinement Behavior of a-Fe by Equal Channel Angular PressingDislocation-Grain Boundary Interactions by the Quasicontinuum MethodMolecular Dynamics Analysis for Deformation and Fracture Behavior of Copper Thin FilmsMolecular Dynamics Analysis on Crack Growth Behavior in Single and Nano-Crystalline Fe by the Use of FS-2NNMEAM Hybrid PotentialGlobal vs. Local Stability of Polycrystalline and Amorphous Metals: Molecular Dynamics StudyManipulation of Intrinsic Localized Modes by Elastic Waves in One Dimensional Anharmonic Lattice SystemsMolecular Dynamics Simulations of Crystal Rearrangement at Grain Boundaries and the VicinityMulti-Scale Modeling of Surface Topography in Single-Point Diamond TurningStrain-Rate-Dependent Deformation Behavior of Carbon-Black-Filled Rubber under Monotonic and Cyclic StrainingNumerical Evaluation of Micro- to Macroscopic Mechanical Behavior of Plastic FoamMacroscopic Properties of Inhomogeneous Material with Randomly Distributed PoresElastic-Plastic Constitutive Equation Accounting for MicrostructureMicroscopic Interlaminar Stress Analysis of CFRP Cross-Ply Laminate Using a Homogenization TheoryA Polycrystalline Analysis of Hexagonal Metal Based on the Homogenized MethodImplicit Formulation of Homogenization Method for Periodic Elastoplastic SolidsMetallo-Thermo-Mechanical Simulation of Carburized Quenching Process by Several Codes - A Benchmark Project -The Effect of Macroscopic Stress State on Transformation Rate in TRIP-Assisted SteelsPhase-Field Simulation of Surface Morphology Evolution during Epitaxial Growth of SiGe/Si SystemTemperature and Strain Rate Effects on Mechanical Behavior of a PMMAStudy on the Microstructure and Mechanical Properties of PET and PET/PTT BlendsApplication of Time-Temperature-Stress Superposition Principle to Nonlinear Creep of Poly(methyl methacrylate)Viscoplastic Constitutive Equation of High-Density PolyethyleneFinite Element Analysis of V-Bending of Polypropylene Using Hydrostatic-Pressure Dependent Plastic Constitutive EquationMultiscale Modeling for Large Deformation of Glassy Polymer Based on Molecular Chain Slip Model and Probabilistic Response Law of InelasticitySeismic Damage Characteristics of RC Shear Wall with Diagonal Profile Steel Braces by ExperimentExperimental Study on Mechanical Property of Steel Reinforced Concrete Short Columns of T-ShapedElastoplastic Damage Modelling and Failure Analysis of Concrete in CompressionCoupling Analysis between Stress Induced Anisotropic Damage and Permeability Variation in Brittle RocksSeismic Performance of a Reinforced Lightweight Aggregate Concrete FrameResearch on the Failure Process of Rocks under Tensile Loading Using Elasto-Plastic CA ModelExperimental Study on Elastic-Plastic Behavior of a Sandstone under Ground TemperatureStatistical Analysis on Strength of Rock Based on YAI ConceptGenetic Analysis of Concrete Crack in Hydroelectric Station's Plant Based on FEMStudy on the Mechanical Property and the Evolutionary Neural Network Constitutive Model for Limestone under Chemical Corrosive EnvironmentsHysteresis Model for Superelasticity of Shape Memory Alloy Based on ANNNumerical Simulation for Stress-Induced Phase Transformation of SMAs Tube under TensionShape Memory Composite of SMA and SMP and its PropertyInfluence of Strain Ratio on Bending Fatigue Life in TiNi Shape Memory Thin WireA Numerical Investigation of Interface Dynamics during Martensitic Transformation in a Shape Memory Alloy Using the Level-Set MethodDeformation Behavior of Shape-Control Plate Using NiTi Shape Memory Alloy WireSuperelastic Deformation Properties of TiNi Shape Memory AlloyShape Recovery and Secondary-Shape Forming in Polyurethane-Shape Memory PolymerA Hydro-Mechanical Coupled Analysis of an Unsaturated River Embankment due to Seepage FlowParameter Identification of Soil Hyperbolic Constitutive Model by Inverse Analysis ProcedureInfluence of Soil Dilatancy on Soil Nail Pull-Out Resistance in Completely Decomposed Granite FillPrediction of Pressure and Density Dependent Failure in Sand-Like Granular Materials under General Stress ConditionsNumerical Modelling of Soft Soil Installed by PVDsThe Influence of the Fluctuation of Micro-Polar Boundary Conditions on the Evolution of Shear Strain Localization in Granular MaterialsDeformation Analysis of Partially Saturated Soil in SlopesUnified Three-Dimensional Revision of Modified Cam Clay ModelAn Elastoplastic Model for Granular Materials Exhibiting Particle CrushingAnalysis of Soil-Structure Interaction with Finite Element MethodStrength and Interaction of Soil Reinforced with Three-Dimensional ElementsA Finite Element Analysis of the Thermo-Hydro-Mechanically Coupled Problem of a Cohesive Deposit Using a Thermo-Elasto-Viscoplastic ModelStudy of Design and Evaluation of Drum Assembly for High Speed Dehydration in Washing MachineStringer Stiffened Cylinders on Local Supports ? The Plastic Buckling BehaviorAnalysis of Elasto-Plastic Stresses and Structural Reliability of a Multilayer Pressure VesselStability Analyses of the Three Gorges Dam Foundation against Sliding by Strength Reduction of Finite ElementsSecond-Order Elasto-Plastic Analysis of Frames by Differential Quadrature Element MethodReliability Analysis for Effects of Reservoir Water Level Change on Embankment DamPattern Shifting Analyses of Micro-Structures of IC PackageAnalysis of Hydrogen Diffusion in Notched High-Strength Steel WiresStudy on Calculation Method of Press Straightening Stroke Based on Straightening Process ModelStress Testing of Individual Steel Strands in a Multiple-Cable Single Borehole Anchorage for Geotechnical EngineeringGeometrical Similarity of Thermo-Structural ProblemsThe Production and Performance Estimation of Dunnage for Transportation of a Steel Roll CoilThe Effect of Temperature Variations on Cycle Time Using an Optimized Cooling Design and a Temperature Control SystemStress Analysis of Cold Die Compaction with Rotating Tools for Aluminum PowderAnalysis of Cavity Tool Stresses in Channel Angular ExtrusionNonlinear Analysis of R/C Frame under Static and Cyclic LoadingsFailure Mode Analysis for Column over Designed Ductile FramesQuasi-Static and Dynamic Axial Crushing of Various Polygonal TubesBasic and Optimum Column Over-Design Factor Avoiding Story Mechanism for Frame StructuresThe Occurrence Limit of Strain Nonuniformity in Thin-Walled Cylinders Subjected to Cyclic TorsionSuperplastic Properties and Microstructure of Friction Stir Welded Joints of Zn-22wt.%Al AlloyResidual Stresses in TIG-Welded I-Beams. Experimental Test-Setup and Validation of Numerical ModelAssessing the Flaws in Welded Seam of Header of a 300MW Steam Turbine Generator UnitMulti Stage Seaming Process for Large Tubular Mechanical Bonded StructureEffect of Dimensional Tolerance on Displacements and Stresses of Wedged-Ring Joint StructureA Study on Friction Stir Process of Magnesium Alloy AZ31 SheetReduction of Residual Stress of Welded Joint Using Local Plasticity Caused by Ultrasonic VibrationFinite Element Simulation of Self-Piercing Riveting of Three Aluminium Alloy SheetsSelf Loosening Behavior of Metal Thread Joints under Transverse Cyclic LoadingFormability of Friction Stir Welded and Arc Welded 5083 Aluminum Alloy SheetsEffects of Loading Speed and Shear Prestrain on Adhesive Fatigue Strength in Single-Lap JointViscoplastic Behavior of Acrylic Adhesive in Butt-Joint at Various Temperatures under Complex Loading: Experimentation and Modelling