Alternative Energy Sources, Materials and Technologies
Selected, peer reviewed papers from the International Conference on "Sustainable Energy Resources, Materials and Technologies" (ISERMAT 2015), January 8-9, 2015, Chennai, India
Published on 28. September 2015
Software
Digital media
966 pages
978-3-03859-339-3 (ISBN)
Description
Collection of selected, peer reviewed from the International Conference on "Sustainable Energy Resources, Materials and Technologies" (ISERMAT 2015), January 8-9, 2015, Chennai, India.
The 181 papers are grouped as follows:
Chapter 1: Renewable Energy, Environment and Heat Transfer;
Chapter 2: Modeling and Simulation;
Chapter 3: Materials Properties Research and Processing;
Chapter 4: Composite Materials Characterization; Chapter 5: Engines and Alternative Fuels; Chapter 6: Electrical Energy Systems and Devices;
Chapter 7: Measurements and Testing
The 181 papers are grouped as follows:
Chapter 1: Renewable Energy, Environment and Heat Transfer;
Chapter 2: Modeling and Simulation;
Chapter 3: Materials Properties Research and Processing;
Chapter 4: Composite Materials Characterization; Chapter 5: Engines and Alternative Fuels; Chapter 6: Electrical Energy Systems and Devices;
Chapter 7: Measurements and Testing
More details
Series
Language
English
Place of publication
Switzerland
Publishing group
Trans Tech Publications
Target group
Professional and scholarly
Dimensions
Height: 142 mm
Width: 125 mm
Thickness: 10 mm
Weight
200 gr
ISBN-13
978-3-03859-339-3 (9783038593393)
DOI
10.4028/www.scientific.net/AMM.787
Schweitzer Classification
Other editions
Additional editions
N. Nallusamy | M. Suresh | S. Rajkumar
Alternative Energy Sources, Materials and Technologies
Selected, peer reviewed papers from the International Conference on "Sustainable Energy Resources, Materials and Technologies" (ISERMAT 2015), January 8-9, 2015, Chennai, India
Book
09/2015
Trans Tech Publications Ltd
€465.48
Shipment within 10-15 days
N. Nallusamy | M. Suresh | S. Rajkumar
Alternative Energy Sources, Materials and Technologies
Selected, peer reviewed papers from the International Conference on "Sustainable Energy Resources, Materials and Technologies" (ISERMAT 2015), January 8-9, 2015, Chennai, India
E-Book
08/2015
Trans Tech Publications Ltd
€211.86
Available for download
Persons
Eds. N. Nallusamy, M. Suresh, S. Rajkumar and A.K. Lakshminarayanan
Content
Fabrication of Core-Shell Structured TiO2/MgO Electrodes for Dye-Sensitized Solar CellsFeasibility Study on Wave Energy Conversion by a Modified Oscillating Water Column DeviceEffect of Circular Fins on Latent Heat Storage to Enhance Solar Water Heater, an Experimental StudyDesign and Fabrication of Riot Shield from E-Waste Printed Circuit BoardAsymmetrical Solar still Coupled with the Mini Solar Pond: Performance Evaluation on Clear, Partially Cloudy and Cloudy DaysPerformance of Latent Heat Solar Thermal Energy Storage System Using Various Heat Transfer FluidsExperimental Analysis of Newly Designed Solar Assisted Single Effect Absorption Cooling System of 5.25 kW Cooling Capacity for Domestic UseA Review of Latent Heat Thermal Energy Storage SystemsEffect of Heat Capacity of Basin Material and Glass Cover on Distillate Yield of Single Slope Passive Solar still ? A Theoretical InvestigationRamification of Mechanical Equipments in Abatement of Pollution ? A Case Study in a Petrochemical IndustryNumerical Investigation of Mass Flow Distribution in Wavy Microchannel Heat SinkPerformance Evaluation of Photovoltaic System in Humid AtmosphereNumerical Studies on Convergent Tube-in-Tube Heat ExchangerExperimental Studies on Thermal and Catalytic Slow Pyrolysis of Groundnut Shell to Pyrolytic OilPerformance Evaluation of Tube-in-Tube Heat Exchanger Using NanofluidsPreperation and Characterization Study of Phase Change Materials for Thermal Energy Storage ApplicationsExperimental Study of Exergy Analysis on Flat Plate Solar Photovoltaic Thermal (PV/T) Hybrid SystemComparative Studies of PCM Based TES System Using Different PCMsBlack Silicon for Higher Efficiency in Solar CellsInvestigation of Biogas Production Using Organic Kitchen Wastes through Anaerobic DigestionExperimental and Computational Fluid Dynamics (CFD) Study of Glazed Three Dimensional PV/T Solar Panel with Air CoolingExperimental Analysis of a Solar still with Reflectors and Sensible Heat Storage MediumsHeat and Fluid Flow Characteristics of Copper Metal Foam as Heat Pipe Wick Material
Thermodynamic Analysis of R134a-R23 Cascade Refrigeration SystemSolid Waste Management of Fishery and ShrimpReview on Performance Enhancement Studies on Solar DryerMethods for Improving Lift Force of Wind Turbine Aerofoil Blades during Low Wind Speed Conditions ? A ReviewAn Approach for Real Time Plastic Waste SegregationDevelopment of an Efficient Procedure for Sustainable Low Carbon Cement Manufacturing ProcessExperimental Investigation and Theoretical Modelling of Solar Dryer Using Evacuated Tube CollectorNumerical Heat Transfer and Pressure Drop Studies of Turbulent Al2O3 - Ethylene Glycol/Water Nanofluid Flow in an Automotive Radiator TubeTheoretical Performance Analysis of Solar Chimney Power Plant for Kota Region of Rajasthan, IndiaProliferation of Population and Pollutants-Pathway for a Grave Future: Comparison of Past and Present Indian Scenario ? A ReviewEvaluation of Common Herbs for Treating Soak Liquor of TanneryCFD Analysis of Heat Transfer Characteristics of Helical Coil Heat ExchangersNumerical Investigations of Outward Solidification in Cylindrical PCM Storage UnitThe Effect of Cotton Cloths on the Performance of the Solar stillCarbon Footprint Analysis of an Educational InstitutionExperimental Study on Thermal Efficiency of Parabolic Trough Collector (PTC) Using Al2O3/H2O NanofluidThermal Performance of Solar Parabolic Dish Concentrator with Hetero-Conical Cavity ReceiverPerformance Investigation of an Eco-Friendly Refrigerant Mixture as an Alternative to R290/R600aColburn ?j? Factor and Fanning Friction Factor ?f? Correlations of Triangular Plain Fin Surface of a Compact Heat Exchanger Using CFDExperimental Investigation of Heat Transfer Performance of Different Nanofluids Using Automobile RadiatorWind Turbine Aerodynamic Braking System Analysis Using Chord Wise SpacingNumerical Investigation of a Chevron Type Brazed Plate Heat ExchangerMaximum Power Point Tracking (MPPT) for a Solar Photovoltaic System: A ReviewComparative Study on Commercial and Corn Cobs Activated Carbon for Removal of Congo Red DyeImproving the Boiler Efficiency by Optimizing the Combustion AirNumerical Studies on the Effect of Cambered Airfoil Blades on Self-Starting of Vertical Axis Wind Turbine Part 2: NACA 0018 and NACA 63415Numerical Studies on the Effect of Cambered Airfoil Blades on Self-Starting of Vertical Axis Wind Turbine Part 1: NACA 0012 and NACA 4415Modeling and Simulation of Industrial Coal Fired BoilerOptimization of Tool Wear Rate during Electro Discharge Machining of NiTi Alloys Using Taguchi MethodFuzzy Based Optimization of Thrust Force and Torque during Drilling of Natural Hybrid CompositesFinite Element Modelling and Simulation of Train Car Body Structure Using LS-Dyna?Finite Element Studies on Lattice Conical Shell Structures Using LS-Dyna?CFD Analysis of a Solar Parabolic DishParticle Swarm Optimization for Integrated Fixture LayoutNumerical Simulation on Effect of Impact Velocity and Target Thickness in Magnesium Alloy AZ31BPerformance Analysis of Thin Shell Bends under High Pressure and TemperatureThermal Analysis of Two Wheeler Brake Disc Using ANSYSSimulation of a Motorcycle Motion during Braking at Cornering Using MATLABTheoretical Modelling of Silica Gel Desiccant WheelsEffect of Swirl on the Performance of an Annular DiffuserA Fuzzy Inference System for Water Quality of Chunnambar River, PuducherryTheoretical Model for the Optimal Design of Surface Texturing on Piston Compression RingGeneration of Crack Growth Resistance Curve from ENF Specimens Made of Glass/Epoxy: An Experimental StudyDevelopment of an In-House Test for Nut Integrity in F-Type WheelsEnergy Enhancement of Long Cylindrical Tubes with Grooves Subjected to Axial ImpactMicrostructure and Mechanical Properties of Friction Stir Welded Joints of Dissimilar AA6061-T6 and AA7075-T6 Aluminium AlloysFatigue Behaviour of Friction Stir Welded AZ31B Magnesium Alloy JointsExperimental Investigation of Machining Parameters during Turning of AISI 316L Stainless Steel Using Nano Cutting EnvironmentElectric Discharge Machining of Cryo-Treated NiTi AlloysMagnetic Field Assisted Electric Discharge Machining of Cryo-Treated Monel 400 AlloyMachinability Study of Beryllium Copper by Powder Mixed Electric Discharge MachiningAn Assessment on Mechanical and Microstructural Properties of Friction Stir Welded 316 L Austenitic Stainless SteelElectric Discharge Machining of Cryo-Treated BeCu AlloysImprovement of Wear Performance of High Speed Steel Tool Using Physical Vapour Deposition Coating ProcessOptimum Welding Conditions for Dissimilar Spot Friction Joining of Aluminium - Interstitial Free Steel JointsRole of Induction Preheating on Tool Wear and Properties of Friction Stir Welded 409M Stainless Steel JointsNano Graphite Powder Assisted Electric Discharge Machining Characteristics of ZM21 Magnesium AlloyUnderstanding the Parameters Controlling the Resistance Spot Welding of DP980 SteelExperimental Investigation and Performance Characteristics Study of Electrolyte in Micro Electrochemical MachiningImproving Wear Resistance of AISI 316LN Austenitic Stainless Steel Using Friction Stir ProcessingCorrosion Resistance of Friction Stir Processed AZ91D Magnesium Alloy under a Salt Fog EnvironmentInvestigation of Thrust Forces, Torque and Chip Microstructure during Drilling of Ti-6Al-4V Titanium AlloyDetermination of Material Parameters during Superplastic Forming of AZ31B Magnesium Alloy at Elevated Temperatures in Uniaxial Tensile TestAssessment of Microstructure and Wear Resistance of Friction Stir Processed Cast Mg-Al-Zn Magnesium AlloyExperimental Study on the Machinability of Inconel 718 Alloy Using Coated Carbide ToolDry Sliding Wear Behavior of Ni-Cr/Micro-ZrO2 Coated AISI 410 Grade Steel-Final RevisionA Parametric Optimization on Cutting Force during Laser Assisted Machining of Inconel 718 AlloyAn Experimental Study on Machinability of Micro Alloyed Steel with K20 Single Layer (TiN) Coated Carbide InsertMicrostructure and Tensile Properties of Friction Stir and Gas Tungsten Arc Welded AZ91D Magnesium Alloy JointsStudies on Microstructure and Mechanical Properties of GTAW, Laser and Friction Stir Welded ZM21 Magnesium AlloyMachinability Studies in Drilling of Inconel 718 Super AlloyZone Wise Properties of Friction Stir Welded Copper ? Stainless Steel Joints Using Digital Image CorrelationInfluence of Cooling Rate on Fatigue Behaviour of Eutectic Al-Si (A413) Alloy CastingEffect of Diffusion Bonding Temperature on Mechanical and Microstructure Characteristics of Cp Titanium and High Strength Aluminium Dissimilar JointsIdentification of Optimized Welding Conditions for Pulsed Current Gas Metal Arc Welding of AISI 904 Super Austenitic Stainless SteelThermal Performance Evaluation of Friction Stir Welded Flat Plate Heat Sink Using CFD AnalysisProcessing Techniques of a Silicon Carbide Heat Exchanger and its Capable Properties ? A ReviewCharacterization of Glass Fibre/Carbon Fibre Hybrid Thermoplastics Composite Laminates Fabricated by Film Stacking MethodAbrasive Assisted Electrochemical Machining of Al-B4C NanocompositeComparative Study of Wear Behavior of Multilayer Coatings for Human Hip ProsthesisDevelopment and Property Evaluation of Fiber Reinforced Hybrid Epoxy Laminate Composite: Jute/E-Glass/Carbon-Fabric-Final RevisionPreparation and Characterization of Al 64430 Metal Matrix Reinforced with SiC ParticlesEffect of Cyclic Loading Frequency on Flexural Modulus of GFRP Laminates with Resin Rich Intermediate LayersRole of Two Stage Wet Layup Manufacturing Method to Fabricate and Test Chemically Treated Dora Hemp Particulate FRP CompositesEffect of Magnesium Addition on Processing the Al-0.8 Mg-0.7 Si/SiCp Metal Matrix CompositesUpshot of Ultrasonic Amplitude on Developing the AA6061/SiC Metal Matrix NanocompositesConductivity Studies on Nano ZnO Incorporated PVC-PVdF Gel Electrolytes for Li+ Ion Battery ApplicationAn Investigation of Mechanical Properties on Aluminium 6061 Reinforced with Silicon Carbide - Metal Matrix CompositesStudies of Abrasive Water Jet Machining (AWJM) Parameters on Banana/Polyester Composites Using Robust Design ConceptDevelopment and Mechanical Testing of Filament Wound FRP Composite ComponentsStudy on Mechanical Properties of AA6351 Alloy Reinforced with Titanium Di-Boride (TiB2) Composite by In Situ Casting MethodInvestigation on Physical, Mechanical and Wear Properties of SiC Particulate Reinforced Aluminium Metal Matrix CompositeMechanical Properties of Copper-TiC In Situ Metal Matrix CompositeMechanical Characteristics of Hot Forged Al6061-Al2O3 CompositePerformance Analysis of Composite Leaf Spring Using Computer Aided EngineeringDevelopment of Rice Husk and Wood Dust Filler Based Polyester Resin Based CompositesEffect of Nano Aluminum Oxide Fillers on the Properties of FRP Polymer Matrix CompositesEffects of Micro and Nano-Size Al2O3 Particle Reinforcement on Mechanical Behaviour of Extruded Aluminum Alloy Matrix Composite
Ex Situ Development of Y-Ti-O Nano ClustersWear Mitigation in Cast Magnesium Alloy through Flyash Reinforced Friction Stir Surface CompositingEffect of Fibre Volume Fraction on Mechanical Properties of FRTP Laminates Produced by Film Stacking MethodExperimental Analysis and Forecasting of Material Removal Rate and Cutting Force in End Milling on A356 Alloy-SiC Metal Matrix CompositesTool Wear Analysis of Al 6061 Reinforced with 10 wt% Al2O3 Using High Hardened InsertsInfluence of Particle Feeding Methods on Processing the AA6061/SiC Metal Matrix NanocompositesTribological Characteristics of Al6061-TiC Composite Synthesized by In Situ TechniqueEffects of Red Mud Reinforcement on Hardness, Wear Behaviour of Cast Al-6Si-0.45 Mg AlloyImpact of Tool Inserts in High Speed Machining of GFRP Composite MaterialFriction Stir Welding of the Aluminum Matrix Composite - A Literature ReviewExperimental Analysis of Different Packed Bed Catalysts for Lean NOx Traps (LNT)Spray Characteristics of Diesel and Biodiesel Fuels for Various Injection Timings under Non Evaporating ConditionsExperimental Studies on the Performance of C.I Engine with Fish Oil Methyl Ester as Fuel for Various Blends of Diesel and LPGPerformance and Emission Evaluation of a Compression Ignition Engine Using Agitated Diesel FuelExperimental Investigation of Diesel - Hydrogen Dual Fuel Direct Injection C.I. Engine with Exhaust Gas RecirculationInfluence of Engine Speed on Mixing and Emission Characteristics of Multiple-Injection Common Rail Direct Injection Diesel EngineZero-Dimensional Analysis of Combustion in a Multiple-Injection CRDI Engine Using Wiebe LawExperimental Study on NOx Reduction in CI Engine Fuelled with Biodiesel (Cotton Seed Methyl Ester Blends) Using Selective Catalytic Reduction (SCR) System with Anova AnalysisExperimental Evaluation of Compression Ignition Engine Fueled with Cashew Nut Shell Liquid Diesel Blend with the Effect of Various Injection PressuresEffect of Re-Entrant and Toroidal Combustion Chambers in a DICI EngineAnalysis of Lift off Height and Blow-Off Mechanism of Turbulent Flame by V-Gutter Bluff BodyInnovative Passive Flame Ameliorator for a Diffusion Flame Burner Using ChevronsInfluence of Ethanol and Di-Ethyl Ether Addition on Fuel Properties of Sunflower Oil Methyl EsterExperimental Investigation on the Performance and Emission Characteristics of Di-Diesel Engine Using Diesel-Ethanol Blends with Aqueous Cerium Oxide Nanofluid as AdditivePerformance and Emission Characteristics of a Di Diesel Engine Fuelled with Cashew Nut Shell Oil (CNSO)-Diesel Blends with Diethyl Ether as AdditivePerformance and Emission Test of Different Mixtures of Oils with Diesel Using Twin Cylinder Four Stroke Diesel EngineEffect of Ethanol on the Fuel Consumption of a Two Stroke Unmodified Commercial Petrol EnginePerformance Study of Preheated Mustard Oil Methyl Ester on Naturally Aspirated CI EngineEffect of Saturation and Unsaturation of Fatty Methyl Esters on Biodiesel NOx Emission CharacteristicsAnalysis of Bio-Oil Produced by Co-Pyrolysis of Mahua Seed and PolystyreneA Review on Microalgae Biodiesel Production and its Usage in Direct Injection Diesel Engines as Alternate FuelAnalysis of Surface Waste Heat Recovery in IC Engine by Using TEGComparative Analysis of Performance and Emission Characteristics of Diesel Engine with Biodiesel Prepared from Waste Cooking Oil and Pongamia OilImproved Efficiency in Engine Cooling System by Repositioning of Turbo Inter CoolerPerformance and Emission Studies of Biodiesel Fuelled Diesel Engines: A ReviewProduction of Bio Gas from Vegetable and Flowers Wastes Using Anaerobic DigestionExtraction and Characterization of Oil from the Seeds of Jatropha Curcas Using Supercritical CO2 and Soxhlet Extraction ProcessEffect of Various Injection Pressures on Spray Characteristics of Karanja Oil Methyl Ester (KOME) and Diesel in a DI Diesel EngineBi-Directional Z-Source Inverter for Superconducting Magnetic Energy Storage SystemsA Modified Maximum Power Point Tracking Control for Bi-Directional Z-Source DC-DC Converter Based Solar Electric VehicleA Novel Control Scheme for Power Factor Improvement in Modified Bridgeless Boost ConverterAnalysis of Controllers for Photovoltaic Fed Brushless DC Motor Based Water Pumping SystemEnergy Optimization of Solar Micro-Grid Using Multi Agent Reinforcement LearningControl of Industrial Drives through Multicell Impedance Source InverterSwitched Reluctance Motor Actuator Based on Current Source Converter for Automotive Throttle ControlImprovement in Energy Harvest of Solar Photovoltaic Systems under Partial Shaded ConditionsComparison of DC-DC Converters for Photo-Voltaic ApplicationStep by Step Design of Flux Switching Machine Using Electromagnetic PrincipleA Novel Skewed Linear Switched Reluctance Motor ? Analysis and DesignDesign and Experimental Verification of Linear Switched Reluctance Motor with Tapered PolesRegeneration Using C-Dump Fed Switched Reluctance GeneratorDesign and Implementation of Perturb and Observe (P&O) MPPT Technique for Negative Output Super-Lift Luo ConverterA Fuzzy Logic Controlled Single Axis Solar Tracking SystemDamage Detection in Laminated Composite Beams, Plates and Shells Using Dynamic AnalysisOn-Line Monitoring the Hard Turning Using Distribution Parameters of Acoustic Emission SignalFlaw Quantification in Colmonoy Overlays Using Immersion Ultrasonic TestingDesign of a Vision Based Bottle Cap Inspection SystemImage Processing Techniques to Analyse a 3D ModelFault Diagnosis of Centrifugal Pump and Vibration Control Using Shape Memory Alloy Based ATDVADesign and Analysis of Micro Accelerometer for Tool Condition Monitoring
Thermodynamic Analysis of R134a-R23 Cascade Refrigeration SystemSolid Waste Management of Fishery and ShrimpReview on Performance Enhancement Studies on Solar DryerMethods for Improving Lift Force of Wind Turbine Aerofoil Blades during Low Wind Speed Conditions ? A ReviewAn Approach for Real Time Plastic Waste SegregationDevelopment of an Efficient Procedure for Sustainable Low Carbon Cement Manufacturing ProcessExperimental Investigation and Theoretical Modelling of Solar Dryer Using Evacuated Tube CollectorNumerical Heat Transfer and Pressure Drop Studies of Turbulent Al2O3 - Ethylene Glycol/Water Nanofluid Flow in an Automotive Radiator TubeTheoretical Performance Analysis of Solar Chimney Power Plant for Kota Region of Rajasthan, IndiaProliferation of Population and Pollutants-Pathway for a Grave Future: Comparison of Past and Present Indian Scenario ? A ReviewEvaluation of Common Herbs for Treating Soak Liquor of TanneryCFD Analysis of Heat Transfer Characteristics of Helical Coil Heat ExchangersNumerical Investigations of Outward Solidification in Cylindrical PCM Storage UnitThe Effect of Cotton Cloths on the Performance of the Solar stillCarbon Footprint Analysis of an Educational InstitutionExperimental Study on Thermal Efficiency of Parabolic Trough Collector (PTC) Using Al2O3/H2O NanofluidThermal Performance of Solar Parabolic Dish Concentrator with Hetero-Conical Cavity ReceiverPerformance Investigation of an Eco-Friendly Refrigerant Mixture as an Alternative to R290/R600aColburn ?j? Factor and Fanning Friction Factor ?f? Correlations of Triangular Plain Fin Surface of a Compact Heat Exchanger Using CFDExperimental Investigation of Heat Transfer Performance of Different Nanofluids Using Automobile RadiatorWind Turbine Aerodynamic Braking System Analysis Using Chord Wise SpacingNumerical Investigation of a Chevron Type Brazed Plate Heat ExchangerMaximum Power Point Tracking (MPPT) for a Solar Photovoltaic System: A ReviewComparative Study on Commercial and Corn Cobs Activated Carbon for Removal of Congo Red DyeImproving the Boiler Efficiency by Optimizing the Combustion AirNumerical Studies on the Effect of Cambered Airfoil Blades on Self-Starting of Vertical Axis Wind Turbine Part 2: NACA 0018 and NACA 63415Numerical Studies on the Effect of Cambered Airfoil Blades on Self-Starting of Vertical Axis Wind Turbine Part 1: NACA 0012 and NACA 4415Modeling and Simulation of Industrial Coal Fired BoilerOptimization of Tool Wear Rate during Electro Discharge Machining of NiTi Alloys Using Taguchi MethodFuzzy Based Optimization of Thrust Force and Torque during Drilling of Natural Hybrid CompositesFinite Element Modelling and Simulation of Train Car Body Structure Using LS-Dyna?Finite Element Studies on Lattice Conical Shell Structures Using LS-Dyna?CFD Analysis of a Solar Parabolic DishParticle Swarm Optimization for Integrated Fixture LayoutNumerical Simulation on Effect of Impact Velocity and Target Thickness in Magnesium Alloy AZ31BPerformance Analysis of Thin Shell Bends under High Pressure and TemperatureThermal Analysis of Two Wheeler Brake Disc Using ANSYSSimulation of a Motorcycle Motion during Braking at Cornering Using MATLABTheoretical Modelling of Silica Gel Desiccant WheelsEffect of Swirl on the Performance of an Annular DiffuserA Fuzzy Inference System for Water Quality of Chunnambar River, PuducherryTheoretical Model for the Optimal Design of Surface Texturing on Piston Compression RingGeneration of Crack Growth Resistance Curve from ENF Specimens Made of Glass/Epoxy: An Experimental StudyDevelopment of an In-House Test for Nut Integrity in F-Type WheelsEnergy Enhancement of Long Cylindrical Tubes with Grooves Subjected to Axial ImpactMicrostructure and Mechanical Properties of Friction Stir Welded Joints of Dissimilar AA6061-T6 and AA7075-T6 Aluminium AlloysFatigue Behaviour of Friction Stir Welded AZ31B Magnesium Alloy JointsExperimental Investigation of Machining Parameters during Turning of AISI 316L Stainless Steel Using Nano Cutting EnvironmentElectric Discharge Machining of Cryo-Treated NiTi AlloysMagnetic Field Assisted Electric Discharge Machining of Cryo-Treated Monel 400 AlloyMachinability Study of Beryllium Copper by Powder Mixed Electric Discharge MachiningAn Assessment on Mechanical and Microstructural Properties of Friction Stir Welded 316 L Austenitic Stainless SteelElectric Discharge Machining of Cryo-Treated BeCu AlloysImprovement of Wear Performance of High Speed Steel Tool Using Physical Vapour Deposition Coating ProcessOptimum Welding Conditions for Dissimilar Spot Friction Joining of Aluminium - Interstitial Free Steel JointsRole of Induction Preheating on Tool Wear and Properties of Friction Stir Welded 409M Stainless Steel JointsNano Graphite Powder Assisted Electric Discharge Machining Characteristics of ZM21 Magnesium AlloyUnderstanding the Parameters Controlling the Resistance Spot Welding of DP980 SteelExperimental Investigation and Performance Characteristics Study of Electrolyte in Micro Electrochemical MachiningImproving Wear Resistance of AISI 316LN Austenitic Stainless Steel Using Friction Stir ProcessingCorrosion Resistance of Friction Stir Processed AZ91D Magnesium Alloy under a Salt Fog EnvironmentInvestigation of Thrust Forces, Torque and Chip Microstructure during Drilling of Ti-6Al-4V Titanium AlloyDetermination of Material Parameters during Superplastic Forming of AZ31B Magnesium Alloy at Elevated Temperatures in Uniaxial Tensile TestAssessment of Microstructure and Wear Resistance of Friction Stir Processed Cast Mg-Al-Zn Magnesium AlloyExperimental Study on the Machinability of Inconel 718 Alloy Using Coated Carbide ToolDry Sliding Wear Behavior of Ni-Cr/Micro-ZrO2 Coated AISI 410 Grade Steel-Final RevisionA Parametric Optimization on Cutting Force during Laser Assisted Machining of Inconel 718 AlloyAn Experimental Study on Machinability of Micro Alloyed Steel with K20 Single Layer (TiN) Coated Carbide InsertMicrostructure and Tensile Properties of Friction Stir and Gas Tungsten Arc Welded AZ91D Magnesium Alloy JointsStudies on Microstructure and Mechanical Properties of GTAW, Laser and Friction Stir Welded ZM21 Magnesium AlloyMachinability Studies in Drilling of Inconel 718 Super AlloyZone Wise Properties of Friction Stir Welded Copper ? Stainless Steel Joints Using Digital Image CorrelationInfluence of Cooling Rate on Fatigue Behaviour of Eutectic Al-Si (A413) Alloy CastingEffect of Diffusion Bonding Temperature on Mechanical and Microstructure Characteristics of Cp Titanium and High Strength Aluminium Dissimilar JointsIdentification of Optimized Welding Conditions for Pulsed Current Gas Metal Arc Welding of AISI 904 Super Austenitic Stainless SteelThermal Performance Evaluation of Friction Stir Welded Flat Plate Heat Sink Using CFD AnalysisProcessing Techniques of a Silicon Carbide Heat Exchanger and its Capable Properties ? A ReviewCharacterization of Glass Fibre/Carbon Fibre Hybrid Thermoplastics Composite Laminates Fabricated by Film Stacking MethodAbrasive Assisted Electrochemical Machining of Al-B4C NanocompositeComparative Study of Wear Behavior of Multilayer Coatings for Human Hip ProsthesisDevelopment and Property Evaluation of Fiber Reinforced Hybrid Epoxy Laminate Composite: Jute/E-Glass/Carbon-Fabric-Final RevisionPreparation and Characterization of Al 64430 Metal Matrix Reinforced with SiC ParticlesEffect of Cyclic Loading Frequency on Flexural Modulus of GFRP Laminates with Resin Rich Intermediate LayersRole of Two Stage Wet Layup Manufacturing Method to Fabricate and Test Chemically Treated Dora Hemp Particulate FRP CompositesEffect of Magnesium Addition on Processing the Al-0.8 Mg-0.7 Si/SiCp Metal Matrix CompositesUpshot of Ultrasonic Amplitude on Developing the AA6061/SiC Metal Matrix NanocompositesConductivity Studies on Nano ZnO Incorporated PVC-PVdF Gel Electrolytes for Li+ Ion Battery ApplicationAn Investigation of Mechanical Properties on Aluminium 6061 Reinforced with Silicon Carbide - Metal Matrix CompositesStudies of Abrasive Water Jet Machining (AWJM) Parameters on Banana/Polyester Composites Using Robust Design ConceptDevelopment and Mechanical Testing of Filament Wound FRP Composite ComponentsStudy on Mechanical Properties of AA6351 Alloy Reinforced with Titanium Di-Boride (TiB2) Composite by In Situ Casting MethodInvestigation on Physical, Mechanical and Wear Properties of SiC Particulate Reinforced Aluminium Metal Matrix CompositeMechanical Properties of Copper-TiC In Situ Metal Matrix CompositeMechanical Characteristics of Hot Forged Al6061-Al2O3 CompositePerformance Analysis of Composite Leaf Spring Using Computer Aided EngineeringDevelopment of Rice Husk and Wood Dust Filler Based Polyester Resin Based CompositesEffect of Nano Aluminum Oxide Fillers on the Properties of FRP Polymer Matrix CompositesEffects of Micro and Nano-Size Al2O3 Particle Reinforcement on Mechanical Behaviour of Extruded Aluminum Alloy Matrix Composite
Ex Situ Development of Y-Ti-O Nano ClustersWear Mitigation in Cast Magnesium Alloy through Flyash Reinforced Friction Stir Surface CompositingEffect of Fibre Volume Fraction on Mechanical Properties of FRTP Laminates Produced by Film Stacking MethodExperimental Analysis and Forecasting of Material Removal Rate and Cutting Force in End Milling on A356 Alloy-SiC Metal Matrix CompositesTool Wear Analysis of Al 6061 Reinforced with 10 wt% Al2O3 Using High Hardened InsertsInfluence of Particle Feeding Methods on Processing the AA6061/SiC Metal Matrix NanocompositesTribological Characteristics of Al6061-TiC Composite Synthesized by In Situ TechniqueEffects of Red Mud Reinforcement on Hardness, Wear Behaviour of Cast Al-6Si-0.45 Mg AlloyImpact of Tool Inserts in High Speed Machining of GFRP Composite MaterialFriction Stir Welding of the Aluminum Matrix Composite - A Literature ReviewExperimental Analysis of Different Packed Bed Catalysts for Lean NOx Traps (LNT)Spray Characteristics of Diesel and Biodiesel Fuels for Various Injection Timings under Non Evaporating ConditionsExperimental Studies on the Performance of C.I Engine with Fish Oil Methyl Ester as Fuel for Various Blends of Diesel and LPGPerformance and Emission Evaluation of a Compression Ignition Engine Using Agitated Diesel FuelExperimental Investigation of Diesel - Hydrogen Dual Fuel Direct Injection C.I. Engine with Exhaust Gas RecirculationInfluence of Engine Speed on Mixing and Emission Characteristics of Multiple-Injection Common Rail Direct Injection Diesel EngineZero-Dimensional Analysis of Combustion in a Multiple-Injection CRDI Engine Using Wiebe LawExperimental Study on NOx Reduction in CI Engine Fuelled with Biodiesel (Cotton Seed Methyl Ester Blends) Using Selective Catalytic Reduction (SCR) System with Anova AnalysisExperimental Evaluation of Compression Ignition Engine Fueled with Cashew Nut Shell Liquid Diesel Blend with the Effect of Various Injection PressuresEffect of Re-Entrant and Toroidal Combustion Chambers in a DICI EngineAnalysis of Lift off Height and Blow-Off Mechanism of Turbulent Flame by V-Gutter Bluff BodyInnovative Passive Flame Ameliorator for a Diffusion Flame Burner Using ChevronsInfluence of Ethanol and Di-Ethyl Ether Addition on Fuel Properties of Sunflower Oil Methyl EsterExperimental Investigation on the Performance and Emission Characteristics of Di-Diesel Engine Using Diesel-Ethanol Blends with Aqueous Cerium Oxide Nanofluid as AdditivePerformance and Emission Characteristics of a Di Diesel Engine Fuelled with Cashew Nut Shell Oil (CNSO)-Diesel Blends with Diethyl Ether as AdditivePerformance and Emission Test of Different Mixtures of Oils with Diesel Using Twin Cylinder Four Stroke Diesel EngineEffect of Ethanol on the Fuel Consumption of a Two Stroke Unmodified Commercial Petrol EnginePerformance Study of Preheated Mustard Oil Methyl Ester on Naturally Aspirated CI EngineEffect of Saturation and Unsaturation of Fatty Methyl Esters on Biodiesel NOx Emission CharacteristicsAnalysis of Bio-Oil Produced by Co-Pyrolysis of Mahua Seed and PolystyreneA Review on Microalgae Biodiesel Production and its Usage in Direct Injection Diesel Engines as Alternate FuelAnalysis of Surface Waste Heat Recovery in IC Engine by Using TEGComparative Analysis of Performance and Emission Characteristics of Diesel Engine with Biodiesel Prepared from Waste Cooking Oil and Pongamia OilImproved Efficiency in Engine Cooling System by Repositioning of Turbo Inter CoolerPerformance and Emission Studies of Biodiesel Fuelled Diesel Engines: A ReviewProduction of Bio Gas from Vegetable and Flowers Wastes Using Anaerobic DigestionExtraction and Characterization of Oil from the Seeds of Jatropha Curcas Using Supercritical CO2 and Soxhlet Extraction ProcessEffect of Various Injection Pressures on Spray Characteristics of Karanja Oil Methyl Ester (KOME) and Diesel in a DI Diesel EngineBi-Directional Z-Source Inverter for Superconducting Magnetic Energy Storage SystemsA Modified Maximum Power Point Tracking Control for Bi-Directional Z-Source DC-DC Converter Based Solar Electric VehicleA Novel Control Scheme for Power Factor Improvement in Modified Bridgeless Boost ConverterAnalysis of Controllers for Photovoltaic Fed Brushless DC Motor Based Water Pumping SystemEnergy Optimization of Solar Micro-Grid Using Multi Agent Reinforcement LearningControl of Industrial Drives through Multicell Impedance Source InverterSwitched Reluctance Motor Actuator Based on Current Source Converter for Automotive Throttle ControlImprovement in Energy Harvest of Solar Photovoltaic Systems under Partial Shaded ConditionsComparison of DC-DC Converters for Photo-Voltaic ApplicationStep by Step Design of Flux Switching Machine Using Electromagnetic PrincipleA Novel Skewed Linear Switched Reluctance Motor ? Analysis and DesignDesign and Experimental Verification of Linear Switched Reluctance Motor with Tapered PolesRegeneration Using C-Dump Fed Switched Reluctance GeneratorDesign and Implementation of Perturb and Observe (P&O) MPPT Technique for Negative Output Super-Lift Luo ConverterA Fuzzy Logic Controlled Single Axis Solar Tracking SystemDamage Detection in Laminated Composite Beams, Plates and Shells Using Dynamic AnalysisOn-Line Monitoring the Hard Turning Using Distribution Parameters of Acoustic Emission SignalFlaw Quantification in Colmonoy Overlays Using Immersion Ultrasonic TestingDesign of a Vision Based Bottle Cap Inspection SystemImage Processing Techniques to Analyse a 3D ModelFault Diagnosis of Centrifugal Pump and Vibration Control Using Shape Memory Alloy Based ATDVADesign and Analysis of Micro Accelerometer for Tool Condition Monitoring