Materials Science and Engineering Technology
Published on 9. July 2014
Software
Digital media
2484 pages
978-3-03795-797-4 (ISBN)
Description
Collection of selected, peer reviewed papers from the 2014 International Conference on Materials Science and Engineering Technology (MSET 2014), June 28-29, 2014, Shanghai, China.
The 422 papers are grouped as follows:
Chapter 1: Polymers and Composites,
Chapter 2: Ceramics and Functional Materials,
Chapter 3: Films and Membranes,
Chapter 4: Nanomaterials and Applied Nanotechnologies,
Chapter 5: Materials for Energy Sources and Energy Supply,
Chapter 6: Chemical Physics,
Chapter 7: Materials and Technologies in Microelectronics,
Chapter 8: Biomaterials, Biotechnologies and Pharmaceutics,
Chapter 9: Materials and Technologies in Environmental Engineering,
Chapter 10: Materials and Technologies of Chemical Industry,
Chapter 11: Corrosion and Surface of Materials, Technologies of Coatings,
Chapter 12: Alloys and Steels, Metallurgical Technologies,
Chapter 13: Building Materials and Technologies in Construction,
Chapter 14: Technologies and Materials in Oil Industry,
Chapter 15: Methods and Devices of Measurements in Materials Engineering,
Chapter 16: Technologies and Equipment for Manufacturing and Processing of Materials,
Chapter 17: Research in Area of Applied Materials,
Chapter 18: General Mechanical Engineering,
Chapter 19: Mechatronics, Control and Automation,
Chapter 20: Power Engineering,
Chapter 21: Electronic Engineering,
Chapter 22: Measurements, Data and Signal Processing, Computational Methods and Algorithms,
Chapter 23: Communication and Information Technologies,
Chapter 24: Product Design and Engineering Management,
Chapter 25: Geophysical Research and Resources
The 422 papers are grouped as follows:
Chapter 1: Polymers and Composites,
Chapter 2: Ceramics and Functional Materials,
Chapter 3: Films and Membranes,
Chapter 4: Nanomaterials and Applied Nanotechnologies,
Chapter 5: Materials for Energy Sources and Energy Supply,
Chapter 6: Chemical Physics,
Chapter 7: Materials and Technologies in Microelectronics,
Chapter 8: Biomaterials, Biotechnologies and Pharmaceutics,
Chapter 9: Materials and Technologies in Environmental Engineering,
Chapter 10: Materials and Technologies of Chemical Industry,
Chapter 11: Corrosion and Surface of Materials, Technologies of Coatings,
Chapter 12: Alloys and Steels, Metallurgical Technologies,
Chapter 13: Building Materials and Technologies in Construction,
Chapter 14: Technologies and Materials in Oil Industry,
Chapter 15: Methods and Devices of Measurements in Materials Engineering,
Chapter 16: Technologies and Equipment for Manufacturing and Processing of Materials,
Chapter 17: Research in Area of Applied Materials,
Chapter 18: General Mechanical Engineering,
Chapter 19: Mechatronics, Control and Automation,
Chapter 20: Power Engineering,
Chapter 21: Electronic Engineering,
Chapter 22: Measurements, Data and Signal Processing, Computational Methods and Algorithms,
Chapter 23: Communication and Information Technologies,
Chapter 24: Product Design and Engineering Management,
Chapter 25: Geophysical Research and Resources
More details
Series
Language
English
Place of publication
Zurich
Switzerland
Target group
Professional and scholarly
Dimensions
Height: 142 mm
Width: 125 mm
Thickness: 10 mm
Weight
200 gr
ISBN-13
978-3-03795-797-4 (9783037957974)
DOI
10.4028/www.scientific.net/AMR.936
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Book
07/2014
Trans Tech Publications Ltd
€460.53
Shipment within 10-15 days
E-Book
06/2014
Trans Tech Publications Ltd
€211.86
Available for download
Content
Mechanical and Thermal Properties of Siloxane Reinforced Biphenyldiol Formaldehyde Resin Curing Epoxy Resin CompositesPolymer Blend through Inclusion ComplexationFabrication and Properties of Composites of Linear Polyacrylamide and Functionalized Carbon NanotubesThermal Degradation Behavior of Polypropylene and Ethylene Vinyl Acetate Copolymer Treated with Intumescent Flame Retardants Containing Caged Bicyclic PhosphatesEffect of Pr Modification Treatment on the Microstructure and Mechanical Properties of Cast Al-Mg2Si Metal Matrix CompositeCuring Kinetics of Silicone Epoxy Resin Containing FluoreneSynthesis of Core @ Shell Composite Particles with a Tunable Shell Containing Natural UrushiolPreparation and Properties of Polypropylene-Graft-Cardanol by Reactive ExtrusionAnalysis and Experiment of Compressive Residual Strength of Composite Laminates with HolesMicrostructures of Poly (9'9-Dihexylfluorene) Grown in the Non-Solvent VaporSynthesis and Properties of Polypropylene Carbonate Polyol-Based Waterborne PolyurethaneCuring Process of Epoxy Resin Using Low Molecular Polyamide 651 as Curing AgentSynthesis of Bis(p-aminophenoxy)Dimethylsilane(p-APDS) and its Process OptimizationStructure and Mechanical Properties of Starch/Styrene-Butadiene Latex CompositesExperimental Advances in Effect of Waviness on Properties of Fibre Reinforced Composite MaterialsEffect of Crosslinker Type on the Properties of Surface-Crosslinked Poly(sodium acrylate) SuperabsorbentsPhase Separation in Thermosetting Blends of Epoxy Resin with PS-b-PCL and PI-Si Block CopolymersEffect of PZN Addition on Piezoelectric and Ferroelectric Properties of Pb (Zr1/2Ti1/2)O3 CeramicsEffect of External Magnetic Field on Dielectric Spectroscopy of Modified PZT CeramicsOptical Interferometric Technique for Induced Strain Ferroelectric Loop Study at Low FrequencyEffect of Dielectric Properties and Elastic Strain Behavior on x/65/35 PLZT Ceramics in Lanthanum (x) Ions ContentsDielectric and Ferroelectric Behavior in 8/40/60 PLZT CeramicsPreparation and Optoelectronic Properties of In2O3 MicrotubesThe Anti-Plane Shear Problem of Two Symmetric Cracks Originating from an Elliptical Hole in 1D Hexagonal Piezoelectric QCsCdS-Bentonite Sulfide Ion Sensor: pH Effect and SelectivityRelationship between Annealing and Shape Memory Effect of Shape Memory PolyurethanePreparation of Uniform a-Alumina Microspheres by Catalytic Precipitation and Calcination ProcessPhase Structure and Piezoelectric Properties of (K0.5Nb0.5)NbO3 - CaZrO3 CeramicsA Novel Model for Predicting the Thermal Conductivity of Fiber Reinforced Ceramic MaterialsNucleation, Crystallization and Characterization of Mica-Based Glass-Ceramics with FluorapatitePreparation of C@ZrSiO4 Inclusion Pigment Using Compound Colorants via Non-Hydrolytic Sol-Gel MethodFabrication and Characterization of SiC-Coated Multi-Walled Carbon Nanotubes Reinforced Reaction Bonded SiC CompositeCarbonization Effect on Phase Structures of Zirconium Oxides with 2-3 Percent YttriumNumerical Research of the Beryllia Ceramics Formation ProcessCu(In,Ga)Se2 Films Deposited by Sputtering with Single Cu(In,Ga)Se2 and Cu-Ga-In2Se3 Targets and a Subsequent Selenization ProcedureEffect of Hydrogen Dilution Ratio and Substrate Roughness on the Microstructure of Intrinsic Microcrystalline Silicon Thin FilmsThe Photoluminescence from (Eu, Yb) Co-Doped Silicon-Rich Si OxidesCompatibility of Polyvinylidene Difluorid/Polyurethane and Preparation of Composite Tubular MembranePreparation and Properties of Two-Dimensional Braid Heterogeneous-Reinforced Polyvinylidene Fluoride Hollow Fiber MembraneEffect of Ethanol Composition in Water Coagulation Bath on Structure and Performance of Homogeneous-Reinforced Polyvinyl Chloride Hollow Fiber MembranesFabrication and Characterization of CuO Micro-Dimensional Structures for Superhydrophobic SurfaceLow Temperature Preparation of Aluminum Titanate Film via Sol-Gel MethodMultilayer Film through Inclusion ComplexationPreparation and Characterization of Bipolar Membranes Modified by Adding Multi-Carboxylic Metallophthalocyanine Derivatives into the Cation LayerHighly Strained Silicon Nitride Thin Film Deposited by PECVD with Double Frequencies in Strained Silicon TechnologiesLayer Formation of SAPO-34 Zeotype Material by EPD Seeding Method Followed by Hydrothermal Secondary GrowthSubstrate Dependence of Microcrystalline Silicon Growth with SiH4 Diluted by ArStudy on the Polarization Reversal Characteristics of a Ferroelectric Thin Film with Surface Transition LayersFabrication of Diamond Films on Cu Metal Substrates with Buffers (SiC or MoSi2) by Hot Filament Chemical Vapor DepositionEpitaxial Pd-Doped LaFeO3 Films Grown on (100) SrTiO3 by Pulsed Laser DepositionThe Preparation of the Highly Preferred Orientation of Wurtzite Structure Zinc Oxide FilmsA Facile Method to Preparation of Amphiphilic Perylene Tetracarboxylic Diimide/ZnS Hybrid Nanocomposites and Improved Semiconducting PropertyPt-TiO2 Nanocomposites in Alginate for Enhancing Photocatalytic ActivityPreparation of Carboxymethyl Chitosan Magnetic Nanoparticles and Separation of Chinese Medicines ComponentsComparison of Hydrogen Sulfide Sensing Properties between Multiple-Walled Carbon Nanotubes (MWNTs) and MWNTs-HAuCl4 MaterialsEffect of Cu,Cr Co-Doped on Structure and Magnetic Properties of Sm2Co17 Alloy FilmsHyaluronic Acid Functionalized Porous Silica Nanoparticles for Drug Delivery and ReleasePreparation and Characterization of Fibrillated Nanofibrous Filter MaterialThe Improvement of Pd Nanoclusters Electro-Catalytic Properties for FAO by the Addition of Co ElementSynthesis and Characterization of Emulsion Coating of Fluorinated Polymethacrylate Modified by POSSThe Performance of Gold Nanoparticles Supported on Mesoporous Zirconia for the Synthesis of AzoxybenzeneThe Facile Hydrothermal Preparation of WO3 and its Photocatalytic Performance under Visible-Light IrradiationHydrothermal Synthesis and Characterization of Cerium-Based OxidesControlled Synthesis of Core-Shell Structure SiO2 /NaGdF4:Eu3+ Magnetic and Optical Bifunctional CompositeElectrochemical Properties of Graphene Nanosheet/Polyaniline Nanocomposite as Electrode for SupercapacitorsGraphene/Sulfur Nanocomposite for High Performance Lithium-Sulfur BatteriesPreparation and Characterization of Magnesium Oxide AerogelsEnhanced Field Emission Characteristics of ZnS Dentalation NanostructuresEnhancement of Titania Photocatalytic Properties by Fabrication of MWCNT-TiO2 NanocompositesStudy on Tensile and Impact Performance for the MWCNTs/EP CompositeThe Natural Rubber/Zinc Oxide Nanocomposites: Its Morphology, Mechanical and Thermal Decomposing PropertiesEffect of Grain Size on the Fracture Toughness of Bimodal Nanocrystalline MaterialsNumerical Simulation of Synthetic Heat Transfer in Laminar Nanofluid in a Horizontal PipeParticle Swarm Optimization Technique for DNA Sensor Model Based Nanostructured GraphenePreparation of Ethanol-Sensing Gas Sensor Based on PECH/Multi-Wall Carbon Nanotubes Sensitive FilmsPreparation and Characterization of Polyacetylene/Expanded Graphite CompositesPreparation and Mechanics Properties of the EP/SiO2 NanocompositesEffects on Characteristics of the SiO2-to-Na2O Ratio on Nano-SiO2 Metakaolin-Based GeopolymersMicrostructures of ZnO Electrospun Nanofibers on AZO GlassResearch of Properties on Li-Ion Batteries Based on a Polypyrrole Derivative Bearing TEMPO as a Cathode MaterialNanostructured Morphology of Spinel LiMn2O4 Oxide under Microwave HeatingEffect of SnO2 Particle Size on Properties of Ag-SnO2 Electrical Contact Materials Prepared by the Reductive Precipitation MethodElectrochemical Investigation of La0.2Sr0.8TiO3+d-Ce0.8Sm0.2O2-d Composite Cathode for the Direct High Temperature Steam ElectrolysisHighly Hydroxylated Graphite Felts Used as Electrodes for a Vanadium Redox Flow BatteryA Novel Route to Prepare Titanium Doped Mesoporous CarbonEnhanced Electrochemical Performances of LiFePO4/C Cathode Materials by Deposited with Ge FilmStudy on Ag/SnO2/TiO2 Electrical Contact Materials Prepared by Liquid Phase In Situ Chemical RouteA Novel Synthesis of Nanometer Spherical ?-Ni(OH)2 Cathode Materials with High Electrochemical PerformancesA High Rate, High Capacity and Long Life (LiFePO4+AC)/Li4Ti5O12 Hybrid Battery-SupercapacitorModeling of Recrystallization Texture of Rolled Polycrystalline AluminiumNumerical Analysis on Decay Heat Power of Weapon-Grade Uranium and Depleted UraniumHydrogen Storage Mechanism of Fe3O4: A First-Principles StudyPhase Field Crystal Study for the Effect of Heating Rate on the Premelting of Grain BoundaryA First-Principles Study on Electronic Properties of Ce/N Codoped Anatase TiO2Effective Nuclear Field Measurement in a Single Quantum Well via Time-Resolved Kerr Rotation TechniqueTheoretical Investigation on Rearrangement Mechanism of FluoroalkylsilaneAssessments of Impurity Diffusion Coefficients of Selected Pure Metals in Fcc FeThe Properties of a Novel Green Long Afterglow Phosphor Zn2GeO4:Mn2+0.01, Pr3+0.01Dy3+ Doping Blue-Green Sr4Al14O25:Eu2+ Phosphor for Enhancing Luminescent Properties and the Mechanism StudyMagnetic and Electrical Property in Mg2+ Deficient La1.4Sr1.6Mn2O7 PerovskiteThe Ideal ?Defects? of the Crystal Structure of GaAsCooperative Energy Transfer of Er-Gd-Tb System in Tb3+, Er3+ Co-Doped K2GdZr(PO4)3 as a Potential Visible Quantum Cutting PhosphorFirst-Principles Investigations of Electronic, Dynamic and Thermodynamic Properties of a-MnO2Ultra-Multilevel-Storage Phase Change MemorySurface Passivation of Crystalline Silicon by a-Si:H Thin FilmsMicrowave-Assisted Synthesis of Graphene Oxide-MnO2 Composites for SupercapacitorsTe Inclusions in CdMnTe Crystal Grown by the Traveling Heater Method and their Effects on the Electrical PropertiesThe Effect of the Cu Source on Optical Properties of Cu-Doped ZnO FilmsThe Model of Nano-Scale Cu-Particle Removal in CO2-Based Micelle Solutions with Different SurfactantsFailure Analysis of the Solder Joints in Flip-Chip BGA Packages under Free-Drop TestThe Advantages of Ga-Graded Obtained by Growth Profile Modification and Na Incorporation on Cu(In,Ga)Se2 Solar CellsNear-Field Broadband Light Transparency via Tunneling and Cavity EffectsModification of Epoxy Resin with Silicone for Electronic Encapsulation ApplicationEffect of Annealing Oxygen Flow Rate on the Properties of Vanadium Oxide Films Deposited by Reactive Magnetron SputteringTEM Study of AlGaN/GaN on Hexagonal SiC SubstratesProtein Adsorption on Titanium Surface Functionalized with Bioactive Gelatin Methacrylate Hydrogel CoatingExtraction and Antifungal Activity of a Lipopeptide BiosurfactantImmobilized Recombinant Chitinase and its Inhibition Effect on Botrytis CinereaElectrospinning Synthesis of PLA Fiber Film Containing Antimicrobial Silver NanorodsCharacterization of Three Calcium Phosphate Microporous Granulated BioceramicsCharacterization of Different Nanostructured Bone Substitute BiomaterialsSintering and Characterization of Calcium Phosphate Biomaterials Elaborated from Fossilized Calcareous ShellThe Content of Physiologically Active Substances in Several Medicinal Mushrooms with Various Doses of ?-IrradiationSynthesis and Characterization of Three Hydrated Calcium Phosphates Used as Biocement PrecursorsPreparation and Release Profiles of a Solid Oleoylchitosan Coated Poly(lactic-co-glycolic acid) NanoparticlesPolymer-Tethered pH-Sensitive Magnetic Nanoparticles for Targeted Delivery of Anti-Cancer DrugPreparation and Anti-Tumor Activity of Polysaccharides from Phellinus pini MyceliaA Facile Method to Synthesize Responsive Magnetic Polymer Composite Nanoparticles with Multifunctional GroupsThe Effects of Immobilization Conditions and Materials on the Desulfurization Performance of Immobilized UP-3The Release Characteristics of Different Model Drugs from Medicated PLGA MicrospheresSynthesis and Performance of pH-Sensitive Hydrogel Microspheres and In Vitro Evaluation as Potential Drug CarriersStudy on Structure Analysis and Cell Toxicity of Okra PolysaccharideResveratrol Loaded Self-Microemulsifying Drug Delivery System (SMEDDS): Development and OptimizationStress Analysis of the Hip Joint Endoprosthesis Ceramic Head for Different Values of Shape DeviationsSynthesis and Characterization of Amphiphilic Copolymer Poly[2-(dimethylamino)ethyl methacrylate-co-methyl methacrylate]Assessment Antibacterial Activities on Essential Oil of Plant ExtractPreparation, Characterization of Cellulose Fibers Grafting by ?-Cyclodextrin and their Application for Antibacterial ProductsDetoxification Capabilities of Adsorbents for Artificial Liver Support Devices: A ComparisonPrediction of the Tertiary Structure and the Dimerization Interface of FNR Protein in Klebsiella pneumoniaePotassium Dichromate Surface Modification of Poly-Lactic Acid (PLA) and Poly-Lactide-Co-Glycolide (PGLA) FibersPreparation and Photocatalytic Performance Study of La-WO3 Co-Doping TiO2Preparation and Photocatalytic Performances of F-Doped TiO2Preparation of Doped TiO2 Responded to Visible LightDevelopment and Comparative Analysis of Aluminosilicate Based Ceramic Filters for Ground Water DefluoridationAdsorption of Ni (II) from Aqueous Solution Based on Porous Magnetic/Chitosan ResinHighly Efficient Adsorption of Eriochrome Black T in Wastewater on Mesoporous Alumina SphereConstruction and Application of Molecularly Imprinted Film Sensor on Determination of Chlorpyrifos in WaterAn Investigation of some Factors Affecting the Dispersant NNO Adsorption on Imidacloprid ParticleAdsorption Studies of Methacrylic Acid-Styrene-Acrylic Polyethers Copolymer on Imidacloprid ParticlesAdsorption Characteristics of Methacrylic Acid-Styrene Copolymer onto Azoxystrobin Particles SurfacesPreparation of 5-Sulfosalicylic Acid Modified Silica Gel and its Adsorption Performances for LeadPreparation and Characterization of Mesoporous Activated Carbon from Alligator Weed with H3PO4Silica Gel as an Adsorbent in the Removal of Cationic Blue X-Bl from Aqueous Solutions and its Regeneration by UV-Fenton OxidationOptimization and Evaluation of Preparation Process of Activated Carbon Loaded ZrO2 Catalyst for Oxidative DesulfurizationResearch on the Quicklime Treatment Dewatered Sludge Technology and MechanicalSimultaneous Reduction and Immobilization of Cr2O72- in Metakaolinite-Based Geopolymer Complexed ReductantConstruction of a Novel 3D Indium Phosphate?Phosphite with Extra-Large 16-MRs Channels: Synthesis, Structure and Fluorescence PropertyThe Effect of Polyvinyl Pyrrolidone and Nickel Acetylacetonate on the Fabrication of Polyacrylonitrile Precursor FiberMorphology and Conductivity of Self-Assembled Pyrene-Perylenetetracarboxylic Diimide DyadSynthesis, Structure and Characterization of a Novel 3D Zinc OrganophosphonateHydrothermal Synthesis and Characterization of Hexagonal Mg(OH)2 Flame Retardant with Bischofite and NH3Effect of Solvent Properties on the Swelling Assisted with Protrusion of PS@TiO2Non-Isothermal Crystallization Kinetics of Semi-Aromatic Polyamide and the Preparation of its FiberRecycled Paper Cellulose Aerogel Synthesis and Water Absorption PropertiesPreparation of P(GMA-co-EGDMA) Monolithic Columns with Adjustable Porous PropertiesThe Synthesis and Electro-Optical Properties of Perylene Dicarboximide Dimer with Electron Withdrawing GroupsEffect of Aniline Oligomer on the Electrosynthesis of Polyaniline FibresPreparation and Properties of Electroactive PANI by ElectrodepositionElectrocatalytic Hydrogenation of Oxalic Acid to Glyoxylic Acid on a Self-Organized TiO2 Nanotube ElectrodePreparation of Zircon Whiskers via Non-Hydrolytic Sol-Gel Process Combined with Molten Salt MethodLow Temperature Preparation of Mullite Whisker via Non-Hydrolytic Sol-Gel Process Combined with Molten Salt MethodCo-Ni Bimetallic Catalysts Coated on Cordierite Monoliths for Hydrazine DecompositionLow-Cost Synthesis and Morphology Control of Magnesium Oxysulfate Hydrate WhiskersThe Preparation of Starch Sodium Octenyl Succinate and its Application as Surface Sizing AgentStructure and Property Development of Polyacrylonitrile Fiber with Ionic Liquid as Solvent during Spinning ProcessPlasticization of Cellulose Diacetate by Ionic LiquidStudies of Vapor-Liquid Equilibrium of Meta-Xylylenediamine-Aniline SystemExperimental Studies of Catalytic Hydrogenation of Isophthalonitrile for Meta-Xylenediamine PreparationOrthogonal Investigation of Influencing Factors on the Modification of Montmorillonite by THPC in Acid ConditionsThe Effects of PTFE Content on Microstructures and Properties of Composite Brushing Plating CoatingNovel Infrared Stealth Properties of Cotton Fabric with ZnO: (Al, In) CoatingResearch on Influencing Factors of Adiabatic Coating PerformanceOne-Step Processing to Fabricate Highly Transparent Superhydrophobic Surface via Granuliform Silica AerogelsDeep Cryogenic Treatment and CrN Coating Effects on Micro-Scale Abrasion of Aluminum Alloy AA 6101-T4Wear Resistance of Ti-40Zr Alloy with TiN and ZrN Multilayer CoatingsPreparation and Tribological Property of Novel Self-Assembled Composite Films on SiliconStudy on the BTSPS Silane Film Prepared on the Surface of the 2A12 Aluminum AlloyHydrophobicity of Beeswax-Chitosan Latex Coated PaperResearch on Cerium Conversion Coating on ZM5 Magnesium AlloyMicrostructure and Properties of Laser Surface Carburized Titanium and Titanium AlloysThe Application Research of Ship Metal Corrosion in Marine EnvironmentCorrosion Resistance of Three 316 Stainless SteelsThe Corrosion Behavior of Cu-Ni-Si Alloy in Sea Water with Deep-Sea BacteriaCorrosion Performance of Medical Titanium Alloy with Different Surface MorphologyAnalyzing the Corrosion of "Hai Yang Shi You 931" Jack-Up Drilling UnitEffects of Soil Type of Shanghai and Electrode Potential on Near-Neutral pH Stress Corrosion Cracking of Pipeline Steel X60The Effects of Hydrogen on Properties of Surface Films Formed on Iron in Sulfate SolutionsCorrosion Inhibition of Gemini Surfactant for Copper in 3.5% NaClA Study of the Corrosion Resistance of M50NiL Bearing Steel by Ion ImplantationMicrostructure Evolution Characterization of Multi-Pass Hot Rolling Simulation of Nb-Ti Microalloyed SteelGrade E550 Heavy Steel Plate by TMCP for Offshore Energy ExplorationPreparation of Crystalline Hematite from BauxiteThe Effect of Heat Treatment of Gray and Nodular Cast Iron with Ferrite Matrix on Mechanical Properties and Corrosion Rate Compared with Medium Carbon SteelMicrostructure and Tensile Behavior of Ti-Rich Ti-Ni-Cu Melt-Spun RibbonThe Oxide Defect of C70250 AlloyA Study on Austenite Catalytic Cryogenic Treatment of Cr-W-Mo-V High Alloy Medium-Upper Carbon SteelEffect of Forging Process on V-Nb-Ti Microalloyed Non-Quenched and Tempered SteelsExperimental Study and Calculation of the Precipitation Behavior of Carbides in Fe-5.78Cr-0.35C Alloy during High-Temperature AgingEffect of Temperature on the Ti-Fe Alloy Prepared by Molten Salt ElectrolysisPreparation of Ti-Fe Alloy from Titanium Concentrate by Electro-Deoxidization in CaCl2Study on Atomic Mobility and Molar Volume for FCC Fe-Co PhaseMolar Volume of Fcc Phase in the Ni-Cr-Mo SystemEffect of Aging Treatment on Phase Transformation of a Pseudoelastic NiTi AlloyImprovement of Paint Hardening Response of a Novel Al-Mg-Si Alloy for Automotive Panel by Adding Zn and Pre-Ageing MatchingEffect of Mn and Si on the Microstructure and Mechanical Properties of Bearing SteelInfluence of Nitrogen Atmosphere Annealing on Structural and Transport Properties of Fe1.125TeInterface Reaction Thermodynamics of AgCuTi Brazing Filler Metal and Alumina CeramicInfluence of Deformation on Aging Precipitation Behavior of an Al-Cu-Mg-Si AlloyWorkpiece Surface Integrity of GH4169 Nickel-Based Superalloy when Employing Abrasive Belt Grinding MethodStudies on Refining Effect and Process Optimization about LFInfluence of RE Addition on Ferro-Matrix Friction Material by In Situ Carbothermal Reduction from Vanadium-Bearing TitanomagnetiteInfluence of the Mo and V Contents on Microstructure and Secondary Hardening of 6Cr6W2MoV SteelStudy on Wear Behaviors of Ni3Al/Cr-Carbides Cladding Layer on High Strength Steel SubstrateStudy on the Mechanical Stability of Retained Austenite in Cold-Rolled Medium-Mn SteelInfluence of Heat Treatment on Fatigue Resistance of Sintered Ti 35Nb 7Zr 5Ta ? AlloyEffect of Hydrogen on the Micro- and Macro-Strain near the Surface of Austenitic Stainless SteelThermographic and Microstructural Analysis of Martensitic Stainless Steel ASTM A743 CA6NM Arising out of Layered GMA Welding Process Using AWS 410 NiMo Welding WireTwo High Strength Low Alloy Steels for Offshore ApplicationNumerical Simulation on Influence of Water-Cooled Stool in the Process of Unidirectional SolidificationApplication of Calcium Treatment to Sulfur Gear Steel 20CrMoNonlinear Dynamic Finite Analysis of BFRP-Strengthened Masonry Structure Based on ABAQUSCrystal Structure and Hydration Characteristics of Tricalcium Silicate Doped with Magnesium OxideMechanical Damage Model of Concrete Subject to Freeze-Thaw Cycles Coupled with Bending Stress and Chloride AttackNumerical Investigation on Fatigue Problem of Cable Net Structure of Five-Hundred-Meter Aperture Spherical Radio TelescopeStudy on Compressive Performances of Fiber Reinforced Mortar with the Application of Jute and PPStudy on Low-Cycle Fatigue Life of Base Metal of the Shock AbsorberCorrosion Behavior of F30S30 Concrete under Wet-Dry Cycles in Simulated Seawater with Magnesium Salt and SulfateDifferent Salt Solution on the Deterioration of Marine Engineering Concrete under the Action of Chemical-Mechanical CouplingPolymer Modified Cementitious Waterproofing Coatings: Application and ProblemsAnalysis of Curing Agent on the Strength of Lightweight Soil Using Recycled SludgeStudy on Engineering Characteristics of Coarse-Grained Soil Based on Large-Scale Triaxial TestCopolymerization Kinetics of Polyetyhylenglycol Allylether Type Polycarboxylate SuperplasticizerImproving the Volume Stability of Steel Slag for Construction and Building MaterialsEffect of Grinding Aids on the Particles Characteristics of Cement and Analysis of Action MechanismEffect of Mineral Admixtures on Rheological Properties of Cement PasteTheoretical Study on Seismic Behavior of LYTAG ConcreteThe Frost Resistance of LYTAG ConcreteRecombinant Materials and Contemporary Energy Efficient ArchitectureEffect of the Composite of Fly Ash and Slag on Alkali-Silica ReactionAnalysis of the Influence of Clay Dosage and Curing Age on the Strength of Plastic ConcreteThe Experimental Study on Bearing Capacity of Reinforced Concrete Structure with Different Reinforce MethodsMechanical Properties of Crumb Rubber ConcreteResearch on Improving Shrinkage Performance of Cement Stabilized Gravel with Waste Rubber ParticlesBending Properties of Laser Welded Web-Core Steel Sandwich PlatesEffect of Rubber Particles on Properties of Pseudo-Ductile Cementitious CompositesBack Analysis of Thermal Parameters of Mass Concrete and its Application Based on Micro-Genetic AlgorithmA Effective Solution Method Based on Bayesian Rule for Prediction of Long-Term Tensile Strength of GFRP Bars in Concrete BeamsSeismic Fragility Analysis of RC Isolated Continuous Girder Bridge Using Radial Basis Function Neural NetworkRobust Design of Structures with Uncertain Parameters and Frequency Constraints Using Non-Probabilistic MethodsResearch Based on Scanning Electron Microscopy to Determine Original Water-Cement Ratio of Hardened ConcreteNumerical Simulation for the Damping Effect of Empty Holes on Blasting VibrationAnalysis on the Effect of External-Wall Insulation on Energy Consumption of Residential Building in LanzhouEnergy Consumption for Heating Residential Building from Implementing Deferent Energy-Saving StandardThe Scheme Comparison of Integral Structure after Adding Steel Storey to Concrete FrameFinite Element Analysis of Rainfall Infiltration in a Compacted Loess EmbankmentNumerical Analysis on Synergetic Behaviors of AE in Concrete Failure ProcessSimulation and Analysis of Energy Consumption Transformation in Office Buildings' Envelopes of LanzhouStudy on the Key Technology of Hot Regeneration of Plant-Mixed Asphalt MaterialAnalyses of the Protective Effect of Polyethylene-Triethoxysilane and Triethoxysilane Emulsion Coatings on Concrete SubstrateResearch Progress of Thickening Agents for Supercritical CO2Study on the Crosslinkers Used in Gelling AgentsOil, Water, Slag Three Phases Separation Technology of Heavy Aging OilResearch on Chemical Degradation of PAM in Oil Recovery ApplicationThe Application of Based on Case-Based Reasoning for Drilling Parameter Optimization in HaiTa OilfieldEvaluation of Uncertainty of Hydrogen's Consistency in Transformer Oil by Gas ChromatographyDissolution of Zirconium Power and Detection of Zirconium Powder Content by ICP-AES MethodApplication of Magnetic Barkhausen Noise in the Evaluation of Heat Treatment ProcessStress-Stain Response of PVC Geomembrane under Uniaxial Tension TestDesign of the EMF-PF and Error CorrectionTURBISCAN: History, Development, Application to Colloids and DispersionsA Progress in Development and Application of Size Exclusion Chromatograph/Multi-Angle Laser Light ScatteringApplication of Polycarboxylic Acid Anti-Crease Finishing Agent for SilkA Same Area Method Used to Calculate the Strain in Forming for an Axisymmetric WorkpieceApplying BP Neural Network Model to Forecast the Largest Coiling Torque of down CoilersBrazing Incoloy 800 Using the MBF-51 Filler FoilActivating of Nickel Slag and Preparing of Cementitious Materials for BackfillingPreparation and Characterization of Plasma Treated Melt-Blown Polypropylene Nonwovens Grafted with Acrylic AcidMicrostructure and Mechanical Properties of High-Entropy Alloys CoCrFeNiAl by WeldingMicrostructure Refinement and Crack Initiation in the Forging ProcessEffect of Aging on Microstructure and Performance after Superplastic Deformation of Fine Grained 1420 Al-Li AlloyNumerical Simulation of One Pulse Power Laser Shock PeeningAnalysis of Hydraulic Prop High Frequency Induction Cladding Temperature FieldCFD Simulation on Hydrodynamics of Liquid-Liquid Slug Flow in MicrochannelCharacterization of Local Cavity Pressures in Squeeze Casting of Magnesium Alloy AM50Microstructure and Mechanical Properties of Brazed Joints Used in Electronic DevicesStructure and Performance of Chemical Duplex Plating Ti Metal Layer on Diamond Surface by Hydrothermal MethodNumerical Simulation and Optimization Technology of Lost Foam CastingA Research on Optimization of Cutting Parameters Based on NSGA-IIBehavior of Microwave Heating of 316 Stainless Steel Green BodyEffects of Environment Temperatures on the Microstructures and Mechanical Properties for Welding Joints of A5083-H111 AlloyExperimental Research on Grinding Surface Layer Behavior and Process Parameter Optimization of Spiral Bevel GearsDevelopment of Permanent Magnet Generator Used for Magnetic Field Assisted Micro Electroforming TechnologySpray Cooling Unit for Heat Treatment of Stainless Steel SheetsResearch on Forming Accuracy of Two Point Incremental Forming for Aluminum 1060A Servo Control System Based on Fuzzy PI Method for Transverse Flux Machine in Mechanical PressEffect of Traverse Speed on the Microstructure and Mechanical Properties in Friction Stir Welded Dissimilar Barrier Butt Joints of AA2024 to AA6061/SiC/55p CompositeDeformation Behavior of Aluminum Alloy Tube in Semi-Dieless Metal Bellows Forming Process with Local Heating TechniqueProperties of X80 Pipeline Girth Welds for Different Welding ProceduresInvestigation of Porous Defects in Spray Formed 7XXX Aluminum AlloyA Study on Development of the Optimal Neural Network in GMA Welding ProcessPotential Spark Erosion Approaches to Silicon Nanoparticles ProductionStudy on CMT Welding of Stainless Steel Railway Vehicle BodyEnergy Consumption Discussions of Porcelain Produce with Operating Conditions in a Simplified ModelMicrostructure and Mechanical Properties of Submerged Arc Welding Filled with Ni Wire Dissimilar Joints Comprising SUS304 and Q245RThe Behavior of Second Phase Particles in a Ti-Nb Microalloyed Steel during Welding Thermal CycleStudy on the Technology and Defects in Low-Pressure Semi-Solid Die Casting of Aluminum Alloy Wheel HubInfluence of Heat-Treatment on Properties, Microstructure and Corrosion Resistant of Zirconium SheetMulti Response Optimization of Carbon-Carbon (C/C) Drilling Parameters by Using Grey Theory TechniqueStudy on Optimal Condition of Activated Carbon Prepared by Microwave Heating from Shot CokeAdhesive Systems for the Production of Multi-Layer Bonded Fabrics for Composite ApplicationsDevelopment of a Novel Technology for New Generation of Non-Crimp Fabrics ? Manufacturing and SimulationOptimization of Drafting Conditions in the Break Drafting Zone Additional Pressure Bar on INA-V Spinning FrameNon-Isothermal Resistance Heating for Hot-Stamped Parts with Tailored Properties and Tempering Treatment on Directly Hot-Stamped PartsComparisons of Explicit and Implicit Finite Element Methods for Sheet Metal FormingNumerical Simulation Study of the Influence of Turning Depth on the Bending Vibration Mode of Work-PieceApplication of Multidisciplinary Design Optimization in the Casting Process OptimizationAnalysis of the Common Causes of Papermaking Cast Iron Dryer's Defects and the Study of Test On-LineReserch on a NOx Emission Forecasting Method Based on Na?ve BayesianAnalysis of Grinding Roller Stress Distribution of Vertical Roller MillEstablish the Load Distribution Model for Vertical Mill Grinding Roller in Width DirectionThe Optimal Levenberg-Marquardt Algorithm to Predict Welding Quality Using Mahalanobis Distance TheoryResearch on the Ni-Cr Alloy Coatings on the Hydraulic Prop by High-Frequency Induction CladdingResearch on Material Structure, Appearance and Color Design and Application of Humidifiers - With Student Consumers as Research Objects260t Ladle Stress and Deformation Finite Element Analysis1450 Cold Rolling Mill Rack Finite Element Modal AnalysisSet-Up and Application of Thermal Fatigue Knowledge OntologyVoid Formation and Growth at Solder-Bonded Interfaces in HP LEDsEvaluation of Thermal Fatigue Crack States of Super-Hard Cutting Tools Based on the Extension TheoryRelationship between the Textures and the Elastic Moduli of Electron Beam Welded Joint in Ti-6Al-4V Titanium AlloyInvestigation of the Influence of Geometric and Technological Factors on the Stress-Strain State of Metal in the Implementation of the Combined Rolling-Pressing ProcessInfluences of Material Parameters on Terminal Effect of PELE with Tungsten Fiber Composite JacketAnalysis and Optimization of Segregators? Structures on
Separation EfficiencyManufacturing and Analysis of Non-Asbestos Sealing GasketThe Swelling Properties of Nitrile Rubber with Different Acrylonitrile Contents in Cyclohexane Medium ResearchEffect of Reserved Texture on Mechanical Properties of Cold Drawn Pearlitic Steel WireMicrostructural and Mechanical Properties of 9%Ni Steels Used for the Construction of LNG Storage TanksInfluence of Moisture and Temperature on Relaxation Function of Oil-Paper Insulation in Traction TransformersInfluence of Si Content on the Characteristics of Al-Zn-In-Mg-Ti Sacrificial AnodeThe Application of Green Materials in Product Packaging DesignThe Hand Making of Radius Fillers and the Establishment of its Evaluative RequirementsComparative Study of High-Power White LED?s Lifetime Based on Temperature Accelerated TestStudy of Surface-Enhanced Raman Spectroscopy of Crystal Violet in Acid AqueousEvaluation of Sound Absorption Capability from PET Mesh to PET/PU Composite BoardMode I Crack Problem for a Functionally Graded Orthotropic COATING-Substrate StructureInvestigation of the Fluorescence Spectra of the Fluorescent DyesX-Ray Analysis of Residual Stress in Weld Region of X70 Pipeline SteelStatic Tensile Properties Simulation of Plane Woven-Reinforced Laminates with Hole DamageA Review of Numerical Study on Explosion and Shock Wave Resistance of Metal Foam MaterialModelling Method for Preventing Thermal Runaway Reaction Accident of Thermal Reactive MaterialThermal Structure Coupling Research and Thermal Fatigue Life Prediction of the Large Mining Machinery BrakeStudy on the Response of Composite Material Cylinder with Metal Liner under Thermal Mechanical ImpactPorous Glass Composite as Diesel Particulate Filter and the Microwave RegenerationThe Fracture Properties of Sandwich Structures Based on a Metal Foam CoreResearch on Tribological Properties of Cast Iron at High-Speed Dry Sliding ConditionA Semi-Analytical and Semi-Numerical Method for Acoustics Radiation Characteristics of Rotational ShellsValidation of a Novel Method for Thermal Performance Evaluation of Parabolic Trough ReceiversAnalysis of Penetration-Explosion Warhead Fragments Distribution and Damage EfficiencyMR Based Brake-by-Wire System with Self-Energizing CapabilityDesign and Optimization of the Bridge Expansion Joints Cleaning MachineResearch on Tracked Vehicle Suspension Parameter Optimization Based on Surrogate Model MethodThe Simulation of Heat Transfer and Flow Performance for Supercharged Boiler SuperheaterThe Resistance Performance Influences from Hull Line Variation of V-Shaped Non-Ballast Ship (NoBS)A Computational Fluid Dynamics Method for Resistance Prediction of the Floating Hull of Wave GliderBifurcation and Chaos in Couplings with ClearanceMaterial Selection and Finite Element Analysis for the Enclosure of Mine Exploration RobotInitial Pressure Influence on Explosion Pressures of Methane-Air Deflagrations in Linked VesselsOptimization Design of Transverse Flux Permanent Generator Based on Response Surface MethodApplication of the Lumped-Parameter Model in Concept Design Phase of Side Impact Safety DevelopmentImproved Dynamic Bayesian Networks in Sea-Battlefield Situation AssessmentEnergy Control of HEV Based on Fuzzy Controller Optimized by Particle Swarm OptimizationNon-Ideal Excitation Approach for Piezoelectric Vibration Based Energy HarvestingThe Study of Water Level Fuzzy Control for Supercharged Boiler DrumThe Application of HPWM in Improving Vehicle Lateral StabilityPhotovoltaic Power Generation Data Preprocessing Using Wavelet ThresholdingTransmission Line Insulators Detection Based on KAZE AlgorithmIdentification of Lightning Strikes on Transmission Lines Based on Integral Method and Wavelet AnalysisResearch of Power-On Detection in POE TopologyThe Research of Photovoltaic Array Intelligent Fault Diagnosis Based on the BP Neural NetworkApplication of AM-OLED Micro-Display in Stereo Display SystemThe Design of Wide-Stopband HTS Bandpass FilterDesign of a Reader Antenna for UHF RFIDAn Effective Model for Wire Medium Based on the 4th Order Dispersion EquationDesign of a Sine Sweeping Constant Current Source Based FPGA and DDSThe Effect of Measurers? View Angle Deviation on Measurement DataThe Engine Fault Diagnosis Based on Time Domain and Frequency DomainThe Application of Improved Dynamic Decision Tree Based on Particle Swarm Optimization during Transportation ProcessModeling and Simulation Method of Component Based Petri NetOn the Hybrid Mean Value of the Square ResidueFeature Extraction Method Based on Moment InvariantsNumerical Movement Tracking of Mitral Valve AnnulusSimulation of Ising Model by Monte Carlo MethodOn Infinite Lower Order of Vector Valued Dirichlet SeriesAn Improved Mean Filter Algorithm for Impulse Noise EliminationBackground Extraction by Fast Independent Component Analysis in Video SurveillanceThe Design of Multi-Protocol Network Based on Point-to-Point Protocol and Frame RelayConstruction and Sharing of Library Digital Resources in China and Southeast AsiaA Model Integration Framework Based Portability for GNSS SimulationA Fast Fault-Identification Algorithm Tailored for Optical Interconnection Networks in High-Performance ComputersResearch on Agent-Based Mobile Database StructureA New Cache-Based Network Coding Retransmission Scheme in Wireless Communication NetworksThe Shapes of Products and the Lifestyle with Slow RhythmApplication of Traditional Chinese Decorative Patterns in Ceramics DesignPackaging Material Barriers Faced by Foods and Agricultural Products Export of China and CountermeasuresSafeguard System on the Quality of Excellent Engineers TrainingDesign Methodologies of Ship General Arrangements - A ReviewThe Design and Simulation of Collision Avoidance System Based on Dual-Mode CollaborativeQuantitative Risk Assessment and Early Warning for pH Value of Disqualified Imported TextileDiscussions of Resource Utilization of Coal GangueResearch on Modes of Recycling and Remanufacturing with Considering the Carbon FootprintSpatiotemporal Distribution of Rainfall Erosivity in the Bailong River Basin, Gansu ProvinceThe Mineral Characteristics and Occurrence of Gold in Nali Gold Deposit, GuangxiEffect of Deficit Irrigation on Root-Shoot Development and Grain Yield of Winter Wheat
Separation EfficiencyManufacturing and Analysis of Non-Asbestos Sealing GasketThe Swelling Properties of Nitrile Rubber with Different Acrylonitrile Contents in Cyclohexane Medium ResearchEffect of Reserved Texture on Mechanical Properties of Cold Drawn Pearlitic Steel WireMicrostructural and Mechanical Properties of 9%Ni Steels Used for the Construction of LNG Storage TanksInfluence of Moisture and Temperature on Relaxation Function of Oil-Paper Insulation in Traction TransformersInfluence of Si Content on the Characteristics of Al-Zn-In-Mg-Ti Sacrificial AnodeThe Application of Green Materials in Product Packaging DesignThe Hand Making of Radius Fillers and the Establishment of its Evaluative RequirementsComparative Study of High-Power White LED?s Lifetime Based on Temperature Accelerated TestStudy of Surface-Enhanced Raman Spectroscopy of Crystal Violet in Acid AqueousEvaluation of Sound Absorption Capability from PET Mesh to PET/PU Composite BoardMode I Crack Problem for a Functionally Graded Orthotropic COATING-Substrate StructureInvestigation of the Fluorescence Spectra of the Fluorescent DyesX-Ray Analysis of Residual Stress in Weld Region of X70 Pipeline SteelStatic Tensile Properties Simulation of Plane Woven-Reinforced Laminates with Hole DamageA Review of Numerical Study on Explosion and Shock Wave Resistance of Metal Foam MaterialModelling Method for Preventing Thermal Runaway Reaction Accident of Thermal Reactive MaterialThermal Structure Coupling Research and Thermal Fatigue Life Prediction of the Large Mining Machinery BrakeStudy on the Response of Composite Material Cylinder with Metal Liner under Thermal Mechanical ImpactPorous Glass Composite as Diesel Particulate Filter and the Microwave RegenerationThe Fracture Properties of Sandwich Structures Based on a Metal Foam CoreResearch on Tribological Properties of Cast Iron at High-Speed Dry Sliding ConditionA Semi-Analytical and Semi-Numerical Method for Acoustics Radiation Characteristics of Rotational ShellsValidation of a Novel Method for Thermal Performance Evaluation of Parabolic Trough ReceiversAnalysis of Penetration-Explosion Warhead Fragments Distribution and Damage EfficiencyMR Based Brake-by-Wire System with Self-Energizing CapabilityDesign and Optimization of the Bridge Expansion Joints Cleaning MachineResearch on Tracked Vehicle Suspension Parameter Optimization Based on Surrogate Model MethodThe Simulation of Heat Transfer and Flow Performance for Supercharged Boiler SuperheaterThe Resistance Performance Influences from Hull Line Variation of V-Shaped Non-Ballast Ship (NoBS)A Computational Fluid Dynamics Method for Resistance Prediction of the Floating Hull of Wave GliderBifurcation and Chaos in Couplings with ClearanceMaterial Selection and Finite Element Analysis for the Enclosure of Mine Exploration RobotInitial Pressure Influence on Explosion Pressures of Methane-Air Deflagrations in Linked VesselsOptimization Design of Transverse Flux Permanent Generator Based on Response Surface MethodApplication of the Lumped-Parameter Model in Concept Design Phase of Side Impact Safety DevelopmentImproved Dynamic Bayesian Networks in Sea-Battlefield Situation AssessmentEnergy Control of HEV Based on Fuzzy Controller Optimized by Particle Swarm OptimizationNon-Ideal Excitation Approach for Piezoelectric Vibration Based Energy HarvestingThe Study of Water Level Fuzzy Control for Supercharged Boiler DrumThe Application of HPWM in Improving Vehicle Lateral StabilityPhotovoltaic Power Generation Data Preprocessing Using Wavelet ThresholdingTransmission Line Insulators Detection Based on KAZE AlgorithmIdentification of Lightning Strikes on Transmission Lines Based on Integral Method and Wavelet AnalysisResearch of Power-On Detection in POE TopologyThe Research of Photovoltaic Array Intelligent Fault Diagnosis Based on the BP Neural NetworkApplication of AM-OLED Micro-Display in Stereo Display SystemThe Design of Wide-Stopband HTS Bandpass FilterDesign of a Reader Antenna for UHF RFIDAn Effective Model for Wire Medium Based on the 4th Order Dispersion EquationDesign of a Sine Sweeping Constant Current Source Based FPGA and DDSThe Effect of Measurers? View Angle Deviation on Measurement DataThe Engine Fault Diagnosis Based on Time Domain and Frequency DomainThe Application of Improved Dynamic Decision Tree Based on Particle Swarm Optimization during Transportation ProcessModeling and Simulation Method of Component Based Petri NetOn the Hybrid Mean Value of the Square ResidueFeature Extraction Method Based on Moment InvariantsNumerical Movement Tracking of Mitral Valve AnnulusSimulation of Ising Model by Monte Carlo MethodOn Infinite Lower Order of Vector Valued Dirichlet SeriesAn Improved Mean Filter Algorithm for Impulse Noise EliminationBackground Extraction by Fast Independent Component Analysis in Video SurveillanceThe Design of Multi-Protocol Network Based on Point-to-Point Protocol and Frame RelayConstruction and Sharing of Library Digital Resources in China and Southeast AsiaA Model Integration Framework Based Portability for GNSS SimulationA Fast Fault-Identification Algorithm Tailored for Optical Interconnection Networks in High-Performance ComputersResearch on Agent-Based Mobile Database StructureA New Cache-Based Network Coding Retransmission Scheme in Wireless Communication NetworksThe Shapes of Products and the Lifestyle with Slow RhythmApplication of Traditional Chinese Decorative Patterns in Ceramics DesignPackaging Material Barriers Faced by Foods and Agricultural Products Export of China and CountermeasuresSafeguard System on the Quality of Excellent Engineers TrainingDesign Methodologies of Ship General Arrangements - A ReviewThe Design and Simulation of Collision Avoidance System Based on Dual-Mode CollaborativeQuantitative Risk Assessment and Early Warning for pH Value of Disqualified Imported TextileDiscussions of Resource Utilization of Coal GangueResearch on Modes of Recycling and Remanufacturing with Considering the Carbon FootprintSpatiotemporal Distribution of Rainfall Erosivity in the Bailong River Basin, Gansu ProvinceThe Mineral Characteristics and Occurrence of Gold in Nali Gold Deposit, GuangxiEffect of Deficit Irrigation on Root-Shoot Development and Grain Yield of Winter Wheat