Advances in Engineering Plasticity XI

What Happens beyond Drucker?s Proposition in Heterogeneous MediaDynamic Compression of Buffer Plates Impact by a High Velocity Sand SprayHomogenized Elastic-Viscoplastic Behavior of Anisotropic Open-Porous BodiesPreliminary Study on Ductile Fracture of Imperfect Lattice MaterialsMechanics of Stretchable ElectronicsDamage of Plates due to Impact, Dynamic Pressure and Explosive LoadsImpact Crushing and Rebound of Thin-Walled Hollow SpheresThe Response of Circular Plates to Repeated Uniform Blast LoadsDynamic Characterization of a Fiber-Metal LaminateEffect of Configuration and Target Span on the Ballistic ResistanceExperimental Study on a Graded Stainless Steel Sheet under Quasi-Static and Dynamic LoadingEffect of Strain Rate on Constitutive Behavior of AA-5052 H34A Study into the Behavior of an Aluminum Foam under CompressionAnalysis on Perforation of Ductile Metallic Plates by APM2 BulletsImpact Loading on Glass/Epoxy Composite Laminates with Nano ClayLarge Deformations of Inelastic ShellsImplicit 2D Numerical Simulation of Materials Submitted to High Strain Rates Including FractureNumerical Simulation of Large Deformation Problems by Element Free Galerkin MethodMechanics of Growing Solids and Phase TransitionsCellular Rod with Varying Cross-Section under ImpactConstitutive Equations of Stress-Strain Responses of Aluminum Sheet under Stress Path ChangesA Constitutive Model for Shape Memory Alloys Involving Transformation, Reorientation and PlasticityA Constitutive Description of the Yield Strength and Strain Hardening Behaviors of Nano-Twinned MetalsA Phenomenological Energy-Based Model for PBX Simulants Considering the Mullins EffectMaterial Behaviors of PBX Simulant with Various Strain RatesCrushing Behavior of SKYDEX? MaterialDislocation Density Based Plasticity Model Coupled with Precipitate ModelDynamic Hardening Equation of Nickel-Based Superalloy Inconel 718Effect of Temperature on the Dynamic Compressive Properties of Magnesium Alloy AZ91DStrain Rate Effect on Microstructure of Dynamically Compressed Magnesium Alloy AZ31BThe Effect of Specimen Size on the Dynamic Compressive Behaviour of Magnesium Alloy AZ31BSome Remarks on the Numerical Modelling of Localized FailurePlastic Deformation Clusters with High Kinetic Energy in Metallic GlassComparison Investigation of Tensile Fracture Properties of Al Alloy at Different Dynamic LoadingsEffect of Intermetallic ?-Mg17Al12 on Fracture of Ultralight Magnesium AlloyLocalized Necking in a Round Tensile Bar with HCP Material Considering Tension-Compression Asymmetry in Plastic FlowInvestigation of Material Instability Behaviors Caused by Combined Stress LoadingsCyclic Polycrystalline Viscoplastic Model for Ratchetting of a Body Centered Cubic MetalA Study on Accelerated Life Test of Spring Unit for Semi-Auto Sliding Mechanism of IT DevicesAn Influence of Step Cyclic Loading due to Torsion on Tensile Curve VariationEvaluation of Deformation Behavior of Silica-Filled Rubber under Monotonic and Cyclic StrainingCyclic Behavior of an Industrial Brass Cu Zn32Effect of Temperature-Dependent Properties on Cyclic Plasticity of Bond Coat in Thermal Barrier SystemsFinite Element Simulation of Bending Fretting Fatigue Considering Ratchetting and Cyclic HardeningOn the Cyclc Behavior of 304L and 316L Stainless SteelsPropagation Behavior of Main Crack in Reinforced Concrete Beams Strengthened with CFRP under Cyclic Bending LoadDeformation and Recrystallization Textures of Surface Layers of Aluminum and Copper Sheets Cold-Rolled under Unlubricated ConditionTensile Strength of Electrospun Poly(ethylene-co-vinyl alcohol) Nanofibre SheetsIndentation Behavior of a Closed-Cell Aluminum Foam at Elevated TemperaturesViscosity of Amorphous Materials during Glass-Forming: More from the Adam-Gibbs LawApplication of Indentation Size Effect in Finite Element Analysis for Friction SimulationSurface Roughening and Formability in Sheet Metal Forming of Polycrystalline MetalAccurate Prediction Approach of 3D Trimming Line for Auto Panel PartA Numerical Approach to Shape Correction of Stamped Products Using Laser Forming TechniquesAn Upsetting - Ironing Type Tribo-Meter for Evaluating Tribological Performance of Lubrication Coatings for Cold ForgingClosure Behavior of Longitudinal Cavities in a Slab by Side PressingContact Pressure Dependent Frictional Characteristics of Hot-Dip Galvanized High Strength Steel Sheet and its Effect on Springback BehaviorDeformation Behavior and Formability of Sheet Metal Laminate Consisting of Perforated Core Sheet and Thin Skin SheetsDevelopment of Cup Inner Surface Smoothing Process by IroningDevelopment of Electromagnetic-Mechanical Coupled FE-Model for Thin Aluminum Plate Forming Using Electromagnetic ForceDimensional Changes by Heat Treatment of Helical GearEffect of Heat Treatment Conditions on Tube Hydroforming Characteristics of Aluminum AlloyEffect of the Constitutive Laws on the Accuracy of Sheet Metal SimulationFinite Element Analysis Using Dynamic Material Model to Design Process Variables of Radial ForgingA Research on the Principle of Thermo-Stress Sizing and its Application for Titanium Alloy SheetForming Limit of AZ31 Magnesium Alloy Sheet under Non-Proportional Deformation at Elevated TemperatureHot Working and Processing Maps of TiCp Reinforced Aluminum Alloy Matrix CompositeInfluence of Intermediate Principal Stress Effect on Flat Punch ProblemsInvestigation of Copper Foil Thinning Behavior by Flexible-Pad Laser Shock FormingMetallic Bipolar Plate Fabrication Process of Fuel Cell by Rubber Pad Forming and its Performance EvaluationNC-Form Grinding of Carbon Fibre Reinforced Silicon Carbide CompositePrediction of Springback of the One-Axle Rotary Shaping Based on Artificial Neural NetworkStudy on Heading and Thread-Rolling Processes of Magnesium Alloy ScrewsTemperature and Processability of Magnesium Alloy AZ31 on Rectangular Cup Deep DrawingThe Effect of Interatomic Potentials on the Onset of Plasticity in the Molecular Dynamics (MD) Simulation of Nanometric MachiningTribological Peculiarity of Galling Position in Square Cup DrawingNon-Linear Large Deformation Kinetics of Polymeric GelFirst Principle Study for the Melting Properties of Face-Centred-Cubic AluminumBeam Assisted Deposition Film for Improving Fretting Fatigue Resistance of Ti-8Al-1Mo-1V Alloy at Elevated TemperatureAnalytical Solution for Elastic and Elastoplastic Bending of a Curved Beam Composed of Inhomogeneous MaterialsAnalysis of Elastic-Viscoplastic Behavior of Honeycomb Sandwich Panels Based on a Homogenization Theory for Free Edge AnalysisA Study on the Collapse Characteristics of CFRP Circular Member According to Collision Energy ConditionsDevelopment of Buffer Stopper Using Progressive Compression Process for Crash Energy Absorption of a Railway VehicleDeformation Behavior of Doubly Curved SS400 Thick Metal Plates by High Frequency Induction-Based Line HeatingBi-Directional Evolutionary Structural Optimization for Design of Compliant MechanismsEffects of Cell-Wall Angle on the Mechanical Properties of Hexagonal HoneycombsEffects of Thicknesses of Sheet and Adhesive Layer on Plastic-Bending of Adhesively Bonded Sheet MetalsElasto-Plastic Property of High Strength Steel at Warm Temperature and its SpringbackEnergy Absorption Characteristics of CFRP Double Hat-Shaped Section Member with Various Stacking Condition under Axial LoadingExperimental Approach for Investigation of Micro Void Behavior on Dual Phase Steel during Plastic DeformationFree Edge Stress Analysis of Unidirectional CFRP Laminates Based on a Homogenization Theory for Time-Dependent CompositesHomogenized Elastic-Viscoplastic Behavior of Thick Perforated Plates with Pore PressureLarge Deflection of a Pin-Supported Slender Geometrically Asymmetric Sandwich Beam under Transverse LoadingMechanical Response of Composite Sandwich Panels: Deformation and Energy AbsorptionOn the Strength of Angle-Patterned Sandwich Cores under Various Loading ConditionsPlastic-Bending of Adhesively Bonded Dissimilar Sheet MetalsQuasi-Static Crush Behavior of Aluminum Hexagonal Honeycomb with Perforated Cell WallsThe Collapse Characteristics of CFRP Hat-Shaped Sectional Members under Moisture Absorptions Having the Temperature ChangeA Study on Injection Molding Analysis and Structural Analysis with Truck Brake PedalA Comparison of EFGM and FEM for Nonlinear Solid Mechanics ProblemsNumerical Analysis of Hypervelocity Impact Problems with Large Deformations, High Strain Rates and Spall FracturesAn Experimental Evaluation on Change in Impedance of TRIP Steel Subjected to Plastic Deformation at Various Strain RatesAn Investigation on the Nose Mass Abrasion of ProjectileAnalysis for the Impact of an Engine Hood to a Radiator Support Frame in a Car Body StructureAnalytical Modelling of a Clamped Sandwich Beam under Impact LoadingBlast Resistance of Clamped Cylindrical Sandwich Shells with Metallic Foam CoresCompressive Behavior of Luffa Sponge Material at High Strain RateCooling Tower Shell under Asynchronous Kinematic Excitation Using Concrete Damaged Plasticity ModelDeformation Mode Dependency on Strain Rate Sensitivity of Volume Resistivity in TRIP SteelDesign Issues of a Kolsky Tension BarDynamic Deflection of a Beam on Metal FoamDynamic Response of Aluminum Foam Sandwich Panel to Transverse ImpactEffect of Tensile Speed on the Failure Load of Laser Welding under Combined Loading ConditionsElasticity Effect in Dynamic Response of Beams with Pre-Cracks Impinged by StrikerExperimental Research on Dynamic Mechanical Properties of 5083 Aluminum AlloyExperimental Study of Sandwich Panels Subjected to Foam Projectile ImpactFinite Element and Experimental Study of the Fiber-Reinforced Composite Laminates under Low-Velocity ImpactMicrostructure Evolution of Ti-46.5Al-2Nb-2Cr at Different Strain Rates and TemperaturesNumerical Studies on the Blast-Resistant Capacity of Stiffened Multiple-Arch PanelNumerical Study of Round-Robin Tests on the Split Hopkinson Pressure Bar TechniqueOn the Strength Enhancement of Cellular Materials under Dynamic LoadingsPossible Schemes to Reduce Nose Blunting of High-Speed Projectile into ConcretePreliminary Study of Sandwich Panel with Rotational Friction Hinge Device against Blast LoadingsResistance of Metal Sandwich Plates with Polymer Foam-Filled Core to Localized ImpulseResponse of 1100-H12 Aluminum Targets to Varying Span and ConfigurationAnalysis on EFP Penetrating against Water-Partitioned ArmorWave Dispersion and Attenuation in Viscoelastic Split Hopkinson Pressure Bar3D SPH Modeling of Heterogeneous Materials Failure under Dynamic LoadsA Dynamic Constitutive Model of Saturated Remolded LoessA Nonlinear Constitutive Model for Soil under Complex Stress StateAnalysis of Slope Failure Mechanisms Considering Micropile-Soil InteractionCrushing and Flowing Characteristics of Lightweight Foamed Concrete under Different Loading Rates and TemperaturesExperimental Study on Shear Strength Characteristics and Stress-Strain Relationship of LoessInvestigation on the Damage Process and the Deformation of Concrete Using Meso Element Equivalent MethodProbabilistic Strength-Reduction Stability Analysis of Slopes Accounting for 2-D Spatial Variation