Advanced Technologies in Manufacturing, Engineering and Materials

Topology Optimization of Passive Constrained Layer Damping on Plates with Respect to Noise ControlStructure Simulation Analysis of Piezoelectric Energy Harvesting DeviceSRSM-Based Stochastic Model Updating MethodStudy on Surface Radiation Noise of a Diesel Engine Based on FEMVibration Simulations of Double-Walled Carbon Nanotubes by Finite Element MethodFinite Element Analysis of Tandem Rubber O-Ring Sealing Structure at the End of ShaftSimulation and Test for Nonlinear Dynamic Specialty of Rubber MountingSynthetical Dynamic Balancing of Mechanism Based on Optimization SimulationStudy on Self-Excited Vibration of Subsoiler-Soil System Based on Modal AnalysisThe Research of Damping Adjustable Isolators Control MethodA Three-Dimensional Analysis Method for the Stability against Deep Sliding of Concrete Dam on Rock Foundation with Mud LayersStudy on the Mechanical Properties of Magnetorheological ElastomersThe Analysis of Aerodynamic Characteristics of the High-Speed Train in Different Railway Conditions under CrosswindsAnalysis of the Movement Trajectory of Blasting Flyrock in the Bottom of Open PitsResearch on Aerodynamic Impacts of Snow on Bridge DecksResearch on Influences of Wind Screens on Wind-Resistant Capability for Long Span Suspension BridgesThe Vibration and Modal Analysis of the Disc BrakeThe Attenuation Trend of the Propeller NoiseExperimental Study of Short-Term Creep Characteristics Base on Step Loading-Unloading Method for Hard RockThe Analysis on the Tribological Properties of TPU/PVC Blends under Oil LubricationThe Analysis on the Tribological Properties of CR/EPDM Blends with Chrome-Plated Steel under Dry SlidingThe Residue Harmonic Balance Method for Duffing-Van Der Pol Oscillator with Fractional DerivativeAnalysis of Flexibility and Stability of Crane Telescopic Boom with Elastic Restraint and Second-Order EffectThe Geneva Mechanism Motion Simulation and Research to Improve the Design MethodOptimization Design of Locking Mechanisms of Small ArmsThe Research of Pick Cutting Performance Based on the Fake Rock Wall of the Roadheader Experiment StationKinematic Analysis of the Slider-Crank Type Cluster well Pumping Unit (SCTCWPU) Based on Pro/MechanismThe Three-Dimensional Modeling Method of the Deformed Flexspline with Involute Tooth ProfilesDesign of Cigarette Universal Code Printing SystemFatigue Strength Check of Flexspline with Inner and Outer Gear Ring of the Micro Harmonic DriveStudy on the Gear Tooth Influence Coefficients of Flexspline of Harmonic DriveDesign of an Extrusion and Heat Setting Machine for Needled Filter FeltsFinite Element Analysis for Critical Components of Ultra-Precision Grinding Machine ToolOptimization Analysis for Key Component of a Precision Optical Aspheric Grinding MachineOptimization Design of Planetary Gear Transmission Mechanism of Traction UnitDesign and Optimization of Magnetic Levitation Actuators for Active Vibration Isolation SystemStructure Design of Stamping Die Based on Topology Optimization and Shape OptimizationSupplement of Several Problems in Roller Chain Drive DesignResearch on Case Similarity Method of Spade Punch PlanterResearch on Reverse Engineering for Blades of Axial Compressors with Laser ScannerDesign and Calculation of the Cam Mechanism Profile Curve Based on MATLABDynamic Simulation of Small Crawler Chassis Turning Based on RecurDynAn Optimization Design Method for the Acceleration and Deceleration Curves of Detachable RopewaySimulation and Analysis of Rail Eddy Current Brake System of High-Speed TrainNew Design of Supercritical Water Oxidation Reactor for Sewage Sludge TreatmentThermal Analysis of CMT StructureUse and Maintenance of CNC Machine ToolsThe Design of Hydraulic Vibratory Fruit-Vine Separation System for Processing TomatoSimulation Study on Biomechanics of Knee Joint in RunningKinematics Simulation Study on a Manual Operation Sugarcane Loader with Metamorphic FunctionNumerical Simulation on Aerodynamic Characteristics of Road Vehicles on Bridges under Cross WindsParameterized Modeling and Analysis of Wind Turbine Blade Using VB and ANSYSA Parametric Experimental Study on the Heat Transfer Characteristics of Supercritical Kerosene in Active Cooling Channels of ScramjetsNumerical Simulation of Three-Dimensional Unsteady Flow Field in the CycloneInvestigation of Three Dimensional Tidal Stream Energy in Surrounding Water Areas of ZTD, ChinaAnalysing for Flow Field of Water Displacing Oil in Microscopic PoreFlow Field Numerical Simulation and Performance Study of Two-Stage Superheated Electrical Steam TrapWind Tunnel Test of Honeycomb in Improving Flow QualityNon-Steady State Moisture Diffusion Flow in Homogenous Pineapple Leaves ParticleboardNumerical Simulation of Bus Windshield Based on Heat Transfer with Impinging JetsInfluence of Regulating Seam on Aerodynamic Characteristics of Virtual Wind TunnelMathematic Model of Displacement Control Unit for Screw Distributor of Asphalt PaverStudy on the Temperature and Pressure of Oxygen Cylinder Attached Grease in Filling ProcessExperimental Research on Damage to Fracture Conductivity Caused by Fracturing Fluid ResiduesEconomic Benefit Analyses for Steam-Driven Induced Draft Fan on Basis of the Heat Balance MethodStudy on Electromagnetic Vibration PumpNumerical Calculation of Fluid Flow in a Continuous Casting TundishNumerical Simulation of the Gas Phase of Cyclone-Separator Sand Trap Based on ICEM CFD and FLUENTTwo New Flow Control Technologies Based on VibrationApplication of Bernoulli Equation in Fluid MechanicsFlameless Venting Devices for Dust Explosions and Experimental Confirmation of their Efficiency3D Wave Simulation Basing on VOF Method and Dynamic Grid TechnologyNumerical Simulation of Influence of Oil Tank with Different Throat Areas on Mirror-Plate-Pump PerformanceEffects of Liquid Properties on Acoustic Gas Bubble Radial OscillationDesign of Pneumatic Transmission System Base on FSC Car of South China University of TechnologyCharacteristics Analysis of Hydraulic System for Screw Distributor of Asphalt PaverPrediction of Remaining Useful Life for Used Gas Turbine BladesMathematical Simulation the Influence of Tundish with a Retaining WallFlow Behavior of Polymer Viscoelastic Fluid in Complex ChannelThe Effects of Parameters on HRSG Thermodynamic PerformanceDetermination of Load Capacity and Deformation for Modular TrailerDesign and Practice of FSAE Car Dynamic Data Acquisition SystemDesign of Bus Air-Conditioning Control System Based on PIC18F458Comparison and Analysis on Side Impact Sled Test of Child Restraint SystemTechnology of Vehicle Multisystem Energy-Harvest AbsorberMulti-Objective Structure Optimization Design of a Car Lower Control ArmNumerical Optimization Research on Rear Characteristic Angles Based on MIRA Model for Aerodynamic Drag ReductionStudy on Driving Safety of Refueling TruckA Research on Modular Training System of Automobile EngineHardware in the Loop Platform with Brake-by-Wire and Steer-by-Wire SystemVehicle Stability Control Based on Generalized Predictive ContolTransmission Ratio Research of Hydraulic Steering by-Wire SystemNumerical Simulation and Wind Tunnel Experiment of the Aerodynamic Characteristics of a Formula Student Racing CarResearch on Approaches to Aluminum Alloy Automotive Wheels' Lightweight DesignIntensities of H? and H? in Hydrogen Plasma Spectrum with High RF Power Levels at ICPTheory Study on Polarizability and Dipole Moment of WmBn(m+n=7) ClustersThe Standard Enthalpies of Formation of Energetic 4,5-dinitroimidazole derivatives: A Theoretical StudyMathematical Models for Solid-Solid Phase Transitions Driven by Configurational ForcesUnloading Behavior Study on FRP-Concrete Interface under an Exponential Softening LawStudies of Carboxyl-Functionalized Multi-Wall Carbon Nanotubes and Mechanical Properties of its MWCNTs-OPC Cement CompositesPyrolysis Features of Larch Bark and XylemEffects of Polymerization Parameters on Aqueous Deposited Copolymerization of Acrylonitrile and Itaconic AcidElectrochemical Study on the Bioleaching of MarmatiteThe Mechanical Performance Degradation of Steels Effected by CorrosionMagnetic States of Nanoparticles with RKKY InteractionTests on Effect of Gravity and Soil Density on Soil Cone IndexPreparation and Characterization of Magnetic Graphene OxideMesoporous Silica Nanoparticles with Controllable Pore Size: Preparation and Drug ReleaseImmobilization of ?-Glucosidase on Modified AttapulgiteWater-Swelling Rubber Containing Small Amount of Nanofillers with Enhanced Water Swelling DurabilityFailure Mechanisms of Nanoparticle Reinforced Metal Matrix CompositeA Study on the Start-up Period of Underground Infiltration System Treating Rural Domestic SewageA Review of Ferrates (VI) Oxidation of Organic CompoundsPreparation of Cr2O3-Al2O3-Cr Coatings on Carbon Steel by Aluminothermic Process Based on Cr2O3 and Al SystemExperimental Study of High-Temperature Resistant Cementing Materials in Geological Exploration Drilling ToolsNovel Poly (butylenes succinate-block-1,3-propylene sebacate): Synthesis and Enzymatic DegradationStudy on Strain Hardening Property and Bake Hardening Property of High Aluminum Dual Phase SteelPreparation and Characterization of Platinum Nanorods Using Ascorbic Acid as the Reducing AgentInteraction Relationship for High Aspect Ratio Semi-Elliptical Internal Surface Cracks in CO2 PipelinesStructural and Optical Properties of VO2 Thin Films Grown on Sapphire SubstratesInfluence of Parameters on Microstructure of CePO4/ZrO2 Machinable CeramicsThe Temperature-Dependence of the Saturation Voltage for Molecular Assembly System with the Effect of the Intermolecular SpacingThe Preparation of CaO:Dy3+, Na+ Rare Phosphor by High Sofid-State MethodSynthesis of NaFeS2 Nanorods by Solvothermal TechniqueRemoval of Hydrophobic Organic Contaminants (HOCs) from Aqueous Solution by Biomimetic Fat Cell (BFC) - The Behavior of LindaneMicrowave Pre-Treatment Reduced the Browning of Peach JuiceCharacterisation of the Precipitates in Aged Al-4.2Cu-1.5Mg AlloyMechanical and Morphology Properties of Polypropylene/
Nano-CaCO3
CompositesSynthesis of Triethynylborazine-Polyhydromethylsiloxane Copolymers and its CeramizationMultiple Transfer Used on Repairing Transparent and Electric Film Based on CVD - Grown GrapheneGraphene Based Electrode Using in Rechargeable Lithium Ion BatteriesA Facile Approach to Synthesis and Modification of Nano-AluminaStudy of Nanoparticle Iron-Nitride MRF and its Rheological CharacteristicEffects of Mesophase Pitch Pre-Oxidation on Structure and Flexural Strength of 2D C/C CompositesThe Contrast Study of Microwave Heating and Traditional Heating Leaching Vanadium from Stone Coal with Sulfuric Acid SolutionEnhancement of Acid Stability of Alpha Amylase from Bacillus licheniformis by Error-Prone PCRParticles Movement Analysis of Rotary Kiln for Calcination of Selenium Dioxide Based on EDEMSynthesis of Macroporous FeS2 Nanotubes and their Electrochemical PropertiesThermogravimetric Analysis of the Reduction of Iron Ore with Hydroxyl ContentPreparation of Tungsten Oxide Nanoplate Thin Film and its Gas Sensing PropertiesSimulation of Polarization Effect in GaN/AlN Resonant Tunneling DiodeFresh-Keeping Effect of Kojic Acid on RapeResearch on the Corrosion Behavior of TC4 Titanium Alloy by Scanning Kelvin ProbeNumerical Simulation of Binary Alloy Crystal Growth of Multiple Dendrites and Direcitonal Solidification Using Phase-Field MethodResearch on the Simulation of Friction Material Surface TopographyAn Applied Research of Automatic Detection Method for Maturity Degree of ViscoseLamination of Green Ceramic Tapes with Adhesive at Ambient TemperatureVertical Floating Zone Crystal Growth of R2PdSi3 Intermetallic Compounds (R=Pr and Nd)Effect of Co-Doping on Iron-Based Oxygen Carrier for CO Oxidation in Chemical Looping CombustionStudy on Continuous Separation of High Concentration Cr (III) and Cr (VI) from Strong Acidic Aqueous Solution Using Strong Alkaline Anion Exchange Fiber ColumnAdsorption to Cu2+ in Waste Water with Chitosan Intercalation BentoniteNumerical Simulation on Two Phase Combustion Characteristic in Solid Rocket Ramjet Afterburning ChamberThe W Loading Effect on SCR deNOx Performance for V-W-Mo/TiO2 CatalystDouble-Layered Cement Composites with Superior Electromagnetic Wave Absorbing Properties Containing Carbon Black and Expanded PolystyrenePlasmon-Enhanced Cell Efficiency in Hybrid Solar Cell Based on CdS Nanorod and Poly (3-Hexythiophene)14N NQR Study of Urea and ThioureaHysteresis Loops of Soft and Hard Magnetic Composited WiresAn Analysis of Degradation and Stability of Polyaniline Doped with Three Common Industrial AcidsStudy on Site Measurement of Freezing Soft Aquifer in Cretaceous StrataInvestigation Stress-Strain Behaviors of Glass/Polymer CompositesThe Deformation and Fracture of Skin under Insertion of MicroneedleImpacts of N, N'-diphenyl-1, 4-phenylenediamine (DPPD) Antioxidant Additive in Jatropha Biodiesel Blends to Reduce NOx Emission of a Multi Cylinder Vehicle Type Diesel EngineMicrostructure and Mechanical Properties of Mg-Zn-Ca-Zr Alloy for Biomedical ApplicationPreparation and Characterization of CMC-PVA/PVA-SA-MePc (COOH)8/CS-PVA Bipolar Membrane Using Electrospinning TechniqueEffect of Specimen Preparation Method on Transmission Electron Microscope Investigation in a Bulk Metallic GlassThe Electrical Conductivity Stability of Polyaniline Doped with Three Different AcidsRheological Properties of Rice Protein-Dextran Composite SystemSpectroscopic Investigation of V3+:YAG CrystalTunneling Recombination Mechanism in n-Type a-Si:H Steady State RegimeGrowth and Characterization of Vapor Deposited Polyimide Thin FilmsThe Study of Matching Flotation in Shandong Copper MineStudy on the Mechanism of the Anodic Oxidation of PAN-Based Carbon Fibers by Cyclic VoltammetryElectrical Properties Measurement of Rat Blood in 10 kHz-10 MHzAnalysis of Nano Luminescent Materials and Devices Based on Paper IntelligenceThe Effect of Proton Implantation on Photoluminescence from Ensembles of InAs Quantum Dots Embedded in GaAsInfluence of Different Porosity of Dead-Man to Flow of Hot Metal in the Hearth of Blast FurnaceEffect of Tension on Mechanical Properties and Structure of Aramid Fibers during Heat TreatmentGrowth of n-Doped and p-Doped GaAs Nanowires by Au-Assisted Metalorganic Chemical Vapor Deposition: Effect of Dopants Flux RatesEffects of pH Value and Water Content of Sol on TiO2 Photocatalytic Activity Prepared by SASSynthesis of Novel Functional Materials for the Photo-Catalytic ReactionEffect of Aging Treatments on Microstructure and Exfoliation Corrosion Behavior of Spray Forming 7075 AlloyEffects of Low-Energy Electron Irradiation on Enhancement-Mode AlGaN/GaN High-Electron-Mobility TransistorsVacuum Synthesis of Nanocrystalline TiC at a Low Carbothermal Reduction TemperatureOxidation Kinetics and Oxide Scale Morphology of Fe-1.5Si AlloyThe Research Situation and Development Trend of Hadifield-SteelElectrospun Polycaprolactone Fiber Mats as Carriers for Tannic AcidStudy on Enzymatic Synthesis of ?-Cyclodextrin with ?-CyclodextrinEffective Application of Magnetic Material Based on Metamaterial AbsorberAnalyse the Influence Factors of Energy-Saving and Emission-Reduction in Asphalt Pavement ConstructionOptimization of Microwave-Assisted Extraction of Polysaccharides from Panax japlcus VarThe Cascaded Effects in the Frequency Selective Surfaces Sculpted from Carbon Fabric Reinforced Epoxy Composite Panels Coated with Conductive Silver PastePreparation and Properties of poly (n-butyl acrylate)/ poly (methyl methacrylate-co-styrene) Emulsion Polymer with Pentaerythritol Triacrylate as a Cross-Linking AgentA Concise Route to Fabricate TiO2 Nanoporous and Nanopillar Films Based on Block Copolymer Self-AssemblyProperties of Ba-Hexaferrite Thin Films with Different Layer StructuresStudy on Properties of Lightweight Aggregate Concrete Characterized by Environment ProtectionNumerical Investigation of Transverse Tensile Behaviors of Marine Composites under Different Strain RatesPreparation and Research of Porous KGM/ Collagen II Composite Cartilage ScaffoldsEnhancement of Electrical Properties of ZnO: Al Thin Films on Transparent TPT Substrates by SiO2 Buffer LayersA New Type of Surfactant in the Synthesis and Performance EvaluationStructural and Electrical Properties of (Cu, Co) Co-Doped ZnO Thin FilmThe Influence of High Magnetic Field on the Stability of CryoECAPed 1050 AlloyPhase Evolutions in the Metallic Precursors of the Ternary Copper-Indium-Gallium SystemEffect of NO2--N Concentration on Denitrifying Phosphorus Accumulating of Nitrosation Denitrifying Phosphorus Accumulating OrganismsPhotoelectrocatalytic Activity of Cu2O Films Prepared on Different Substrates in Connection with TiO2 ElectrodesTheoretical Study of Energy Levels Splitting of Praseodymium-Doped TrichlorideTribological Performance of PEEK Reinforced PTFE Composites under Dry Sliding ConditionSolvothermal Method Preparation of Nano Y2O2S:Eu3+ and Research of Luminescence Property and CytotoxicityNumerical Simulations of Uniaxial Tension Behaviour of Aluminum Single Crystal by Crystal Plasticity Finite Element MethodPreparation and Properties of Multi-Layer Composite PaperboardCutting Force Analysis in Micro Milling of SteelResearch on Effects of Accuracy in Variable Loading on the High-Pressure Water Jet Incremental FormingResearch on the Wear Characteristics of PDC Diamond Cutting Tools for Natural GraniteEffect of Orientation of Reinforcements on the Quality of the Machined Surface in Machining Aluminium CompositesMagnetic Field Interaction of Tiny Grinding Wheel Cluster Based on Magnetorheological EffectApplication of BP-GA Algorithm in Optimization of Process Parameters in Thin Strip Tandem Cold RollingStudy on Dimension Change Law from CAD Model to Prototype of Rapid Investment Casting Based on Selective Laser SinteringThe Influence of GGG70L Laser Surface Hardening Power on Quenched Layer PerformanceThe Craftwork Analysis of Centrifugal Pouring for Copper-Lead Alloy Bearing ShellThe Effects of Heat Treatment on Microstructure and Mechanical Properties of AISI 4140 for Base Cutter Cane HarvesterPrediction of Cutting Force of Austempered Ductile Iron Based on BP Neural NetworkComparative Research on the Grindability of Ti-6Al-4V and PTMCs with WA Wheel and CBN WheelStudy on Undercut Characteristics of Die Steel in Spray EtchingStudy on Influence of Skill Level on Tool Wear during Feed Mode Change in Lathe WorkAnalysis and Experiments on the Plastic Limit Load of Elbows under Combined Pressure and In-Plane Closing Bending MomentImprovement of Surface Properties of Magnetic Shaft Material Inconel718 by HVOF Spray Coating of WC-CrCNi PowderStudy on Surface Properties of PAN-Based Carbon Fiber Oxidized in a Static Electrochemical Oxidation ProcessPrecision Grinding Process Design of Twin-Screw Compressor RotorApplication of Cutting Fluids with Ultrasonic Treatment in Metal CuttingFormation of the Stress Field in the Vicinity of a Single Defect under Shock (Impulse) LoadingStrengthen Experimental Study of High Strength Steel 40CrNi2Si2MoVA Based on Laser Shock ProcessingMechanism Analysis of Magnetic Control High-Speed Welding Undercuts DisappearInfluence of Rare Earth on Hot-Dipped 55%Al-Zn Alloy CoatingResearch on Technology Test of 304 Stainless Steel Super Long Deep-Hole DrillingMeasurement of the Oxide Film on Cold Rolled Steel by XPS and TEMNet-Shape Forming of a Roof Joint Node by Thixoforming of A357 Aluminum Alloy for a Low Speed Electric VehicleMicrostructure and Properties of Dissimilar Metals Welded Joint of New Tamping Tine Steel for Railways MaintenanceThermo-Mechanical Modelling of Friction Stir Welding ProcessA New Grinding Heat Flux Distribution Developed by Theoretical DerivationResearch of Wear Mechanisms of PCD Cutting Tools in Sand Mold MillingEvolution Regularity of Temperature Filed in Hot Power Backward Spinning for 7075 Cast Aluminium Alloy TubeOff-Line Feed Rate Scheduling Based on a Mechanistic Cutting Force on Discrete Segments during End MillingDecarburization Depth Control Technology Research and Application for U71Mn RailStudy on the Shape Distortion of Sheet Inner-Concave FlangingStudy of the Effect of Hot Gas on Atomization Quality of Spray FormingResearch on Old Asphalt and the Regeneration Agent Compatibility TestExperimental Analysis of Hardness Distribution of the Transition Region in Tailored Tempering Stamping of Ultra-High Strength SteelStudy on Processing Parameters of Supersonic Particles Bombarding TreatmentLoad Distribution Optimization of Tandem Cold Mill Based on Quantum Chaos Multi-Objective Evolutionary AlgorithmFracture Accident Analysis of Drill Pipe Friction Welding JointsEffects of Ceramic Particle Reinforcement Distribution on the Penetration of FGM ArmorExperimental Study on the Influence Factors of Static Aerodynamic Characteristics of Ice-Coated Commonly Used ConductorsStudy on Urea-Formaldehyde Resin for Glass Wool ProductsThe Effect of Nanometer Polysilicon Material on Properties of Wax-Diesel Oil SystemsImpact Behaviour of Woven Natural Silk Composite Face-Sheet Sandwiched Foam under Low Velocity ImpactA Method of Evaluating Carton Black's Dispersion Based on Standard ImagesA Method of Evaluating Carton Black's Morphology Based on Convex HullThe Manufacture of Spherical WC Powder in PlasmaMorphological Analysis of Particles in Transmission Electron Microscopy Image Using Image ProcessingA Study into the Influence of Material Characteristics on Book Binding DesignLightweight Material: Aluminium High Silicon Alloys in the Automotive IndustryStudy on Application of Hydrated Calcium Silicate in Paper from Wheat Straw PulpExperimental Study on Mechanical Properties of Heated Granite under Different Cooling WaysDeveloping the Yarn-Dyed Poplin Shirt Fabric with High-Count and High-Density and Softness by Using Water-Soluble FiberThe Design and Production of Bamboo Pulp Silver Fiber/Cotton Antibacterial FabricResearch on the Strands Fracture Caused by Poor Compression in the Strain ClampOptimized Analysis of Orthogonal Experiment of Continuous Casting Powder Components Based on MatlabDesign of a Testing System for Strength of Ceramic SinteringBehavior of Thin-Film-Type Delamination of Layered Composite in Post-BucklingA Method of Eliminating Ice on Wind Turbine Blade by Using Carbon Fiber CompositesEffect of Moisture Absorption and Fiber Ply Orientation for Artificial Hip Joint on the Mechanical Properties of Carbon/PEEK CompositesDesign of Artificial Hip Joint by Carbon/PEEK CompositesStudy on Properties of Extraction Palladium(II) with the New Synthesized MaterialLaser-Ultrasound Testing of Cracks in Porcelain InsulatorMotion of Digital Precision Forming Machine without Pattern Casting and Tool Path Simulation Based on VRMLImproving of Manufacturing Systems in Slovak Industrial EnterprisesResearch on Dynamics of a Three-DOF Parallel Manipulator for Levelling MechanismDigital Human and New Type of Man-Machine Coordinated Digital Shop Manufacturing SystemManufacturing Resource Ontology Modeling Techniques Based on CarrierQuantum Harmony Search Algorithm for Assembly Sequence Planning of Design Knowledge Resources in the Cloud Manufacturing EnvironmentForecasting the Success of Implementing Advanced Manufacturing TechnologyA Balancing Mechanism for an Anthropomorphic RobotAutonomous Navigation System Based on GPS for Agricultural VehiclesStudy of Low-Load Industrial RobotMicrowave PDC Drill BitResearch on Rapid Manufacturing Technology of Complicated Casting Mold without PatternAnalysis and Research on Construction Technology of Air Return Inclined Shaft Crossing Formation on Special ConditionsApplication and Development of Ship Welding MaterialThe Introduction of COREX Process DevelopmentInfluence of Collapse Phenomenon on Unburned Pulverized Coal in the Lumpy Zone of COREX Melter GasifierEfficient Method for Tool Path Generation Based on Region Intersection for Complex Mesh Surface MachiningNumerical Investigation Based on Orthogonal Design of Structural Parameters on Large-Diameter DTH Hammer BitThe Optimization of Production and Drainage of CMB for Multi-Branch Horizontal WellAutomated Technology Research on Fully Mechanized Mining of Thin Coal SeamsComputer Numerical Control Machine Tool and its Development TrendAutomatic Control of Teaching Experiment System Based on the NetworkStudy on Speed Control MethodAutomated Feeding System for Meat Pigeon Based on STM32Research and Application of Self-Tuning Control System PlatformThe Design of PID Control System which Based on the STM32Design of Flight Test System Based on 1553B-Bus Real-Time Processing SystemControl Strategy of Non-Road SI Engine's VibrationA New Timing Method Based on PLC Scan Cycle Time and its Application in Automatic Marine Power StationWinter Jujubes Automatic Sorting Equipment Based on PhotocellInformation Fusion of the Vibration and Acoustic Signals Based Rolling Bearing Incipient Fault Diagnosis MethodNovel MEMS Switch Topology and Nanosensor Package for Multi-Analyte Chemical DetectionStudy on Recognition Method of Ferrographic Debris Based on Neural NetworkResearch of LED Chips Positioning SystemDirectional Pattern Measuring System Research of a TT&C AntennaThe Design of Pigeonry Environment Monitoring System Based on ZigBeeA Novel Image Fusion Based on Nonsubsampled Contourlet TransformFeature Subset Selection Based on the Genetic AlgorithmOn-Line Measurement of Fiber Temperature along Spinning Line Using Monochromatic Infrared ThermometerThe Intelligent Ultrasonic System for Quality Testing of Weld Connections in Turbine RunnersA Survey on Coverage Control Technology in Wireless Sensor NetworkAn Improved Fast Algorithm of Spacecraft Separation Distance CalculationSurvey of Support Vector Machine in the Processing of Remote Sensing ImageObstacle Detection of Autonomous Land Vehicles for Geological ProspectingThe Study on Diaphragm's Mechanical Properties of Hot-Film Air Flow SensorMulti-Frequency Heterodyne Phase Shift Technology in 3-D MeasurementStudy on Crane Structural Health Monitoring and Early Warning Expert SystemResearch of Imaging and Inversion of Seismic AttributeSoftware System Development of Crane Structural Health MonitoringA Construction of Fault Test Constraint Based on the Optimal Fusion Set of Multiple SlicesMeasurement of Cobalt Gradient in Functionally Graded WC-Co CompositesMultiple Reflection Cancellation Using High Order Statistics Adaptive Filter for Scattered Triangulation Laser Displacement SensorAn Automatic Barn-Entering System for GrainsDesign of a Hand-Shape Image Acquisition System Based on DM642An New Image Feature Based on ROLDHandwritten Character Recognition Based on a Multiple Fermat's SpiralResearch on Feature Extraction Method for Handwritten Chinese Character Recognition Based on Supervised Independent Component AnalysisResidential Extraction Based on Joint Feature of Spectrum and SpatialThe Application of RFID at Leasing Management of Coal Mining EquipmentsRFID Technology-Based the Railway Package Management Platform DesignEnergy-Balanced Routing Method for Wireless Cooperative Wireless NetworkGPS Multipath Estimation with Improved SNR Adaptation Performance Utilizing Adaptive FiltersCarrier Modulation Technology Based on Orthogonal Frequency Division MultiplexingDesign and Analysis of a Novel Capacitive RF MEMS Switch with Folded BeamApplication of Numerical Analysis in Improved Threshold De-Noising Method of SEMGStudy of Dynamic Spectrum Access Scheme in HD RadioExperimental Evaluation of Networked Munitions Communication and LocalizationSpreading of Partially Coherent Sinh-Gaussian Beams in Slant Atmospheric TurbulenceConvolutive Blind Separation Using Domino Effect Relevance RankingPerformance of MIMO and 64QAM Application in HSPA+ SystemSoftware Method for the Signal Processing of Grating Based on SCMThe Spectral Gain Characteristics of Optical Fiber Weak Light Pre-Amplifier Based on Raman EffectEffects of the Internal Structure of H Boolean Functions on Algebraic Immunity and Algebraic DegreeA Spatial Resource Top-K Query Algorithm in Cyber Physical SystemA User?s Profile Model for Cloud Computing ServiceThe Discussion of Appling Parametric 3D Modeling in Urban Design Based on CityengineComparison of the Function Regression Method and Data Classification Method for Limit State Function ApproximationUsing the Pairing Function for Distributed Access Control in Cloud ComputingA System Hierarchical Method Based on Self-Resolving Message ProtocolMarketing Model Investigation of Cable Television Service Based on BP Neural Network and Decision TreeOn Relationship of some Cryptographic Properties for Weight Symmetric H Boolean FunctionsResearch on Situated Reconstitution of Non-Manifold Polyhedral from Function-to-Form MappingResearch on the Initial Value of the Simulated AnnealingResearch and Application of OPC Network Communication in Configuration SoftwareOverlapping Raindrop Particle Image Segmentation Algorithm Based on Boundary Geometrical CharacteristicsResearch on the Construction of Service Mode in University Mobile Digital LibraryOptimized Tourism Destination Selection Based on InLinPreRaResearch of Mobile Learning System for Music Appreciation Class Based on Cloud ComputingStudy on Knowledge Services Based on Multi-Media Data MiningThe Effect of SVC on Gansu Hexi Grid Static Load Margin by BPA Modeling and SimulationA Web Information Extraction Method Based on HTML ParserThe Processing and Analyzing of Non-Structured Data in Digital InvestigationCUDA Parallel Computing Combined with OpenGL InteroperateA Briefest Feature Subset Selection Algorithm Based on Preference AttributeThe Exponent Set of a Class of Two-Colored Digraphs with One Common VertexComparison between Normalized Databases Implemented with Different Database SystemsAn Algorithm for Global Multi-Resolution Terrain Simulation Based on the Method of Hash TableQuery Expansion Based on Books Tags of User?s Social Relations in XML Book SearchA Genetic Algorithm Enhanced by Tabu Search for the Single Machine Scheduling Problem with Deteriorating JobsGrey-Hierarchy Relation Analysis and Evaluation of Port Operating AbilityA Portable Weather Station Design Applied in the Smart CityThe Visualization of Soil Moisture Based on VB and SurferAn Algorithm to Detect Noised Pixel in ImageTollerance Coefficients of Stability in Linear Dynamic System Calculated in Matlab EnvironmentOptimal Reactive Power Compensation in Power System Considering SVCSimulation of Nonlinear Transformer on Open and Short CircuitMultitask Fuzzy Learning with Rule WeightA New Method to Optimize Locations of SVC Based on Risk and Static Load MarginOptimization Models Based on Line Loss Post Management in Power SystemBuilding Information Architecture of the Internet of ThingsA Healthcare Service System Based on Internet of ThingsComputational Trust in Cloud ManufacturingEstablishment of E-Cooperative-Research-and-Development-Work Platform for Knowledge AllianceMagnetic Suspension Research and Design of Real-Time Display Based on the Internet of ThingsThe Design of Smart Alcohol Testing System Based on Internet of ThingsRapid Layout Design System Research and Application for Beverage-Packaging Production LineAirline Safety Risk Evaluation Based on Factor AnalysisResearch on Business Process Management System Based on SOAInterest Distribution Model Based on the Line Loss Management in Distribution NetworkSeamless Safe Supervision System of Edible Agricultural ProductsStudy on the Development of Energy Management in Iron and Steel Enterprises Based on Circular EconomyMeasuring the Satisfaction of Implementing Assistive Input Devices for Disabled People with InLinPreRaDesign of Products and Processes: A Perspective from the Pyramid Model of Value SystemAnalysis of Chinese CNC Machine Tool Industry Based on Patent IntelligenceSome Simulation Results on Bullwhip Effect in Supply Chain with Several DealersMobile Adverting: The New Promising Marketing ChannelResearch on the Recycling Question of Electronics Manufacturers Implementing EPR Based on Differences in Consumer DemandResearch on the Optimization Path of Regional Tertiary Industry from E-Commerce Perspective - In the Case of Fujian ProvinceThe Research on Pricing Customizing Services of Logistics Information PlatformPrecision of Weights in Weapon EstimatingResearch Progress of Quantum Dot Intermediate Band Solar CellAnalysis of NPD Performance Based on a Meta-Analysis and Structural Equations Modeling ExaminationQuantitative Study on the Risk Level of Human Factor for Drilling Process