Advanced Materials and Engineering Materials VI

Saman Tree Ash for Stoneware GlazePreparation of Cerium Dioxide Film by Anodization in Na2C2O4-NH3?H2O-H2O-(CH2OH)2 ElectrolyteEffect of Heat Treatment on the Crystal Structure of the Anodic Cerium Oxide FilmsExperimental Research on Preparation Technics of High-Purity Quartz MaterialPreparation of Bi2WO6 Powders with Micro-Carbon Spheres Acting as a Template by Refluxing MethodA Molecular Dynamics Simulation Study on the Relationship between Hydrogen Bond and Damping Properties of AO-70/NBR CompositesEffect of DFA Modification on Thermal Properties of Multifunctional Epoxy/Anhydride SystemsInteraction between Polyaramidic Electrospun Nanofibers and Epoxy Resin for Composite Materials ReinforcementPly Orientation-Driven Path Planning with Multi Reference Paths for Robotic Fiber Placement on Mesh SurfaceFlame Retardant Effect of a Modified Intumescent Flame Retardant on a Rigid Polyurethane FoamA Comparison of the Polymer Matrix Behavior and Mechanical Properties of the Glass Reinforced Plastics and Glass Reinforced Epoxy Pipes under Different Oil Field ChemicalsFlexural Properties and Vibration Behavior of Jute/Glass/Carbon Fiber Reinforced Unsaturated Polyester Hybrid Composites for Wind Turbine BladeExperimental Evaluation of the Chill Casting Method for the Fabrication of LM-25 Aluminum Alloy-Borosilicate Glass (p) CompositesEffect of Graphene Oxide on Non-Isothermal Melt Crystallization Kinetics of Poly(Trimethylene Terephthalate)Influence of Zinc Oxide Nanograins on Properties of Epoxidized Natural Rubber VulcanizatesAn Alternative Crosslinking of Epoxidized Natural Rubber with Maleic AnhydrideEmission Spectra Analysis of Atmospheric Pressure DBD Plasma Being Processed by Polypropylene Non Woven FabricBiocompatible Tough Hydrogels via Micellar Copolymerization of NIPAM and Stearyl Acrylate: Synthesis and CharacterizationElectrodeposition of Chitosan Composite Film and its Application for Protein ConjugationOptical Characterization of Quaternary AlInGaN Multiquantum WellsPolyester Gel Electrolyte with Three Dimensional Network for Efficient Quasi-Solid-State Dye-Sensitized Solar CellsAnalysis of Carrier Transport Mechanism for p-Type SnO Thin-Film TransistorFabrication of Macroporous Silicon in Organic Electrolytes and their LuminescenceInfluence of Support Structure on the Ultraviolet Photoluminescence Enhancement from Graphene/ZnO Hybrid StructuresStructures, Dielectric Properties and Luminescence Properties of Nb Doped Li2TiO3 Solid Solution CeramicsStudies on the Structure and Properties of ZnSb Thin Films Deposited under Various Sputtering ConditionsPreparation and Properties of Glutaraldehyde Cross-Linked Silk Sericin FilmsEffect of Preparation on Microstructure of Ag-Loaded TiO2 Nanotube ArraysFabrication of TiO2 by Rotating Horizontal Anodization and its CO2 Photoreduction ActivityAntiwear Behavior of CuO Nanoparticles as Additive in Bio-Based LubricantQuasi-Static Compressive Characteristics of Cu-Containing Closed-Cell Aluminum FoamsSemisolid Strip Casting of Aluminum Alloy by a Twin Roll Caster Equipped with a Channel ScraperEffect of Casting Conditions on Fabrication of Lotus Type Holes in Ingot Cast by Core-Bar Pulling MethodThe Removal of Impurity Silicon from Aluminum Melt by the Addition of K2TiF6Effect of Boosting Velocity on Forming Quality of High-Strength TA18 Titanium Alloy Tubes in Numerical Control BendingVertical Wall on an Aluminum Alloy Plate Fabricated by Friction Stir FormingMulti-Objective Optimization in Electrical Discharge Machining of 6061 Al/SiCp Using RSM and NSGA-IIFractal Characterization Analysis in CNC Milling Aluminium AlloyEffects of Deformation and Annealing Temperature on the Microstructures and Hardness of Cu-29Zn-0.6Bi BrassStudy on Fractal Characterization Laws of Cutting Force in CNC Turning Aeronautic Aluminium Alloy 7075-T651Study on Surface Roughness of Al2024 Alloy during Shot Peening Process Based on Finite Element MethodThe Effects of Water Flow Rate on Copper CorrosionAnnealing Effects in Nanograined Al-Cu-Mg Alloy Processed by Equal Channel Angular PressingEffect of Quenching Treatment on Microstructure and Hardness of Mg-9Li-4Al-1Zn-0.5Y AlloyStudy on Aging Treatment Microstructure of Magnesium-Zinc AlloyExperiments of Drilling Titanium Alloy with Varying Operation ParametersSimulation of Stress Field in High-Frequency Welded Pipe of Composite Aluminum AlloyDepth and Horizontal Distance of Surface Roughness Improvement on Vertical Surface of 3D-Printed Material Using Ultrasonic Cavitation Machining Process with Abrasive ParticlesA Grinding Wheel of Self-Lubrication with Solid Powder Lubricant and Centrifugal Impeller for Green Grinding Process of TC4 AlloyA Study of the Interaction between Abrasive Waterjet and Target by CFD and FEM MethodFerrite-Martensite Dual Phase Treatment of AISI 1040 Steel and Mechanical CharacterizationWELDOX960 Low Alloy High Strength Steel Welding Automation Manufacturability ResearchEvaluation of the Fire Resistance for Beams Designed with Fire Resistant Steel through a Fire Engineering MethodMechanical Properties and Microstructure of Graphene-Cement CompositesEffect of Silica Fume and Fly Ash on Compressive Strength and Weight Loss of High Strength Concrete Material in Sulfuric and Acetic Acid AttackEffect of Fibers Length and Fibers Content on the Splitting Tensile Strength of Coconut Fibers Reinforced Concrete CompositesThe Evolution Analysis of Mechanical Properties of Marine Submerged Concrete Based on GRAEffect of Carbon Dioxide Curing on Strength Development of Cement MortarNumerical Modeling on the Stress-Strain Behavior of Sand via Disturbed State Concept ModelResearch Progress on the Effect of Stray Current on Properties of Cement-Based Materials in ChinaStudy on the Effect of [Al13]7+ over the Free Swelling Ratio of Expansive SoilEffectiveness of Non-Suction Controlled Method of Wetting-Drying Cycles for Unsaturated Compacted Loess MaterialPreparation of Polyaniline/Cu-BTC Composite and its Sensing Application for AmmoniaQuartz Crystal Microbalance Coated with 18-Crown-6 Ether Film for 2,4,6-Trinitrotolurene (TNT) Vapor DetectionStudy on Methane Adsorption Capacity of Sensor Probe Based on Lead-Free Piezoelectric Resonance Modified by Zeolite XNew Methodology of Controlling Mechanical Properties of MaterialsMolecular Dynamics Simulation of the Variation in the Microstructure of a Polycrystalline Material under Tensile LoadHigh-Precision Determination of Residual Stress of As-Sprayed and Ground WC-10Co-4Cr Coating Using Optimized XRD-sin2? TechniqueThree-Dimensional Scanning Hall Probe Microscopy for Final Stage of Crack Growth of Chromium Molybdenum Steel SCM440Measurement Model for Young's Modulus of Axially Functionally Graded MaterialsModified Method to Predict Fatigue Crack Shape Based on Empirical ObservationCharacterization and Photocatalytic Activity of SmMnO3 Prepared by Sol-Gel ProcessSynthesis of TbMnO3 by Microwave Assisted Method and its Photocatalytic ActivityPreparation and Characterization of Pr2Ti2O7 by Sol-Gel ProcessPreparation of Nanosized Ni2+-Doped ErFeO3 by Microwave Assisted Process and its Visible-Light Photocatalytic ActivityTunable Fabrication of Electrospun Polyvinyl Alcohol Nanofibrous Membrances for Effective Air FiltrationPreparation and Characterization of YMnO3 by Microwave Assisted ProcessPreparation of Cobalt Phthalocyanine Supported Mg-Al Hydrotalcite and its Catalytic Activity for Degradation of Methylene BlueInvestigation on Jurassic Shale Gas Reservoir Characteristics from Northern Qaidam BasinWater-Rock-CO2 Interaction in Hot Dry Rock - A ReviewBioleaching and Desulfurization of Pyrite Roasting Residues by NB Bacteria for the Recovery of Cu, Zn and the Magnetic MaterialsSimulation on the Compression Molding Process of Biomass Material