Science and Engineering of Materials
Published on 6. August 2014
Software
Digital media
324 pages
978-3-03795-787-5 (ISBN)
Description
Collection of selected, peer reviewed papers from the 1st International Conference on Science & Engineering of Materials 2013 (ICoSEM 2013), November 13-14, 2013, Kuala Lumpur, Malaysia.
The 61 papers are grouped as follows:
Chapter 1: Biomaterials;
Chapter 2: Catalytic Materials;
Chapter 3: Ceramics;
Chapter 4: Coating and Surface Engineering;
Chapter 5: Composites;
Chapter 6: Electronic and Electronic Packaging;
Chapter 7: Concrete and Structural Materials;
Chapter 8: Material Modeling and Simulations;
Chapter 9: Environmentally Sustainable Materials and Processing;
Chapter 10: Materials Conversion And Renewable Energy;
Chapter 11: Materials For Energy Storage;
Chapter 12: Metal and Alloys;
Chapter 13: Nanotechnology;
Chapter 14: Polymers
The 61 papers are grouped as follows:
Chapter 1: Biomaterials;
Chapter 2: Catalytic Materials;
Chapter 3: Ceramics;
Chapter 4: Coating and Surface Engineering;
Chapter 5: Composites;
Chapter 6: Electronic and Electronic Packaging;
Chapter 7: Concrete and Structural Materials;
Chapter 8: Material Modeling and Simulations;
Chapter 9: Environmentally Sustainable Materials and Processing;
Chapter 10: Materials Conversion And Renewable Energy;
Chapter 11: Materials For Energy Storage;
Chapter 12: Metal and Alloys;
Chapter 13: Nanotechnology;
Chapter 14: Polymers
Collection of selected, peer reviewed papers from the 1st International Conference on Science & Engineering of Materials 2013 (ICoSEM 2013), November 13-14, 2013, Kuala Lumpur, Malaysia.
The 61 papers are grouped as follows:
Chapter 1: Biomaterials;
Chapter 2: Catalytic Materials;
Chapter 3: Ceramics;
Chapter 4: Coating and Surface Engineering;
Chapter 5: Composites;
Chapter 6: Electronic and Electronic Packaging;
Chapter 7: Concrete and Structural Materials;
Chapter 8: Material Modeling and Simulations;
Chapter 9: Environmentally Sustainable Materials and Processing;
Chapter 10: Materials Conversion And Renewable Energy;
Chapter 11: Materials For Energy Storage;
Chapter 12: Metal and Alloys;
Chapter 13: Nanotechnology;
Chapter 14: Polymers
More details
Series
Language
English
Place of publication
Zurich
Switzerland
Target group
College/higher education
Professional and scholarly
Dimensions
Height: 142 mm
Width: 125 mm
Thickness: 10 mm
Weight
200 gr
ISBN-13
978-3-03795-787-5 (9783037957875)
DOI
10.4028/www.scientific.net/AMR.970
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Mohd Rafie Johan | Darman Singho Noorsaiyyidah
Science and Engineering of Materials
Selected, peer reviewed papers from the 1st International Conference on Science & Engineering of Materials 2013 (ICoSEM 2013), November 13-14, 2013, Kuala Lumpur, Malaysia
Book
08/2014
Trans Tech Publications Ltd
€184.46
Shipment within 10-15 days
Mohd Rafie Johan | Darman Singho Noorsaiyyidah
Science and Engineering of Materials
E-Book
06/2014
Trans Tech Publications Ltd
€176.55
Available for download
Content
Biomimetic Porosity of Gelatin-Hydroxyapatite Scaffold for Bone TissueRemoval of Pb (II) by CS2 Modified Kenaf PowderThe Effects of YSZ-Al2O3 Addition on Hydroxyapatite Fabricted by Powder MetallurgyThe Potential of Quercetin in Psidium guajava L. Leaves Extract as Bioinhibitor for Controlled Released FertilizerSynthesis and Properties of Biphasic Calcium Phosphate Prepared by Different MethodsDecolorization of Methylene Blue by Photocatalyst in the Ag3PO4-AgI SystemInvestigation of Ultrasonic Pretreatment on the Synthesis of Zeolite-T and its CO2 Adsorption CharacteristicsSintering Effects on Microstructure and Electrical Properties of (Na0.5K0.5)0.94Li0.06NbO3 Lead-Free CeramicsVapochromic Copper (I) Pyrazolate Complex Materials for Phosphorescent Chemosensors of EthanolA Study on Biocompatibility of Gadolinium Based Anodizing Coating AZ91D Magnesium Alloy in Simulated Body Fluid (SBF) SolutionCharacterization of Oxide Film by Vanadium Based Anodic Oxidation CoatingInvestigation of Surface Characteristics of Hydroxyapatite/Titanium Composite Layer Obtained by HF Magnetron SputteringBasalt Carbon Hybrid Composite for Wind Turbine Rotor Blades: A Short ReviewEffect of Maleic Anhydride Grafted Poly(actic acid) on Properties of Sawdust/Poly(lactic acid) Composites Toughened with Poly(butylene adipate-co-terephthalate)Effects of Sawdust Content and Alkali Treatment on Mechanical and Flame Retarding Properties of Sawdust/Recycled High Density Polyethylene CompositesElectron Beam Crosslinking of EVA/ENR-50/HNTS Nanocomposites in the Presence of Trimethylol Propane Triacrylate, TMPTAQuasi-Static Flexural and Indentation Behaviour of Polymer-Metal LaminateCorrosion Behavior of Soldered and Laser-Welded Ni-Free Co-Cr Alloy Joints in Sodium Chloride SolutionDeposition of Amorphous Boron Carbide Films with Pulsed Magnetron Sputtering and Evaluation of their Mechanical PropertiesFabrication and Characterization of RF Magnetron Sputtered Silicon Oxide FilmsFabrication Method of Mems Based Clamped-Clamped Resonant MagnetometerHumidity Sensors on Thermally Oxidized Silicon SubstratesInfluence of Spinning Speed on the Properties of Sol-Gel Spin Coated ZnO FilmsMicrostructural and Electrical Conductivity of Annealed ZnO Thin FilmsPreparation and Mechanical Characterization of Amorphous B-C FilmsRelationship between Precursor Gas Flow Rate with the Structural and Morphology Properties of Diamond like Carbon FilmsSurface Plasma Characterization of Polyimide Films for Flexible ElectronicsUndoped Diamond-Like Carbon Thin Films Grown by Direct Current-Plasma Enhanced Chemical Vapour Deposition: Structural and Electrical PropertiesEffects of Aggregate Size on Concrete Shear StrengthImproving the Properties of Oil Palm Shell (OPS) Concrete Using Polyvinyl Alcohol (PVA) Coated AggregatesDevelopment of Rapid Tooling for Investment Casting Using Fused Deposition Modeling ProcessModeling the Release of Urea from Coated Urea: The Constant Release StageStatistical Analysis of Binder Behavior during Debinding Step in Powder Injection Molding (PIM)Rigid-Plastic Finite Element Simulation of Cold Forging and Sheet Metal Forming by Eulerian Meshing MethodDevelopment of Water Adsorbents Synthesized from Spent Bleaching Earth to Dehydrate Ethanol Water MixtureKinetic and Isotherm Adsorption Studies of Methylene Blue on Sulfuric Acid Treated Spent Grated Coconut (Cocos nucifera)Monosodium Glutamate Functionalized Chitosan Beads for Adsorption of Precious Cerium IonPreliminary Study on Analysis of the Chemical Compositions and Characterization of Empty Fruit Bunch (EFB) in MalaysiaSolvent Extraction of Light Rare Earth Ions Using D2EHPA from Nitric Acid and Sulphuric Acid SolutionsA Non-Isothermal Thermo Gravimetric Kinetic Analysis of Malaysian Poultry-Processing-Dewatered-SludgeEnhancement of the Efficiency of Dye-Sensitized Solar Cells (DSSC) by Utilizing Silver Plasmonic Nanoparticles on Hydrothermally-Treated Titania (TiO2) PhotoanodeThe Prospects of Electricity Generation from Poultry Processing Dewatered Sludge (PPDS) in MalaysiaA Study of Surface Hardening on Local Bolts (C= 0.01%) at a Temperature of 400?C for 5 and 6 Hours with Nitrocarburizing Using RF-Plasma ApparatusEffects of Complexing Agent Concentration and Bath pH on Electroless Nickel Deposition for Tungsten Carbide PowdersFormation of Expanded Austenite Using Hybrid Low Temperature Thermochemical Heat Treatment on 2205 Duplex Stainless SteelHigh Temperature Oxidation Effect on the Dissolution Rate of Hot-Dip Aluminized Steel in Aluminum MeltInvestigation the Structural and Magnetic Properties of FINEMET Type Alloy Produced by Mechanical AlloyingEffect of Sepiolite Content on Mechanical and Flammability Properties of Ethylene Vinyl Acetate NanocompositeEffect of Vacancy and Stone-Wales Defects on the Shear Strength of Carbon Nanotube-Polymer InterfacesEffects of Heat Generation or Absorption on Free Convection Flow of a Nanofluid Past an Isothermal Inclined PlateInvestigation of Nanoscale Structure of Self-Emulsifying Drug Delivery System Containing Poorly Water-Soluble Model DrugSimple and Low-Cost Preparation of Carbon-Coated Titanium Dioxide via Hydrothermal MethodSynthesis and Characterization of Mn2+ Doped ZnS Using Reverse Miceller MethodSynthesis of Silica-Coated Copper Nanoparticles and its Application to Red Color GlazeSynthesis, Optical, Photocatalytic and Bactericidal Properties of Nanocrystalline ZnO Powders by Precipitation MethodAlumina Reinforced Epoxidized Natural Rubber in Latex Phase Mixing: Effect of Alumina ContentChanges in Characteristics and Physicochemical through Vermicomposting of Pome Sludge by Epigeic Earthworm E. eugeniaeEffect of the Addition of Nano-Clay on the Physical Property and the Melt-Spinnability of Bacterial PolyesterMechanical, Thermal, and Morphological Properties of Thermoplastic Starch/Poly(lactic acid/Poly(butylene adipate-co-terephthalate) BlendsQuasi-Static Indentation Behaviour of Glass Fibre Reinforced PolymerRheological Behavior Characterization of Natural Rubber Containing Different GelSurface Modification of Poly(lactic acid) (PLA) via Alkaline Hydrolysis DegradationThe Effect of Wollastonite Filler on Thermal Performance of Intumescent Fire Retardant Coating