New Materials and Advanced Materials

Recycled Concrete Using Crushed Construction Waste Bricks Subject to Elevated TemperaturesVolume Fraction Effects of Silicon Carbide on the Wear Behavior of SiCp-Reinforced Magnesium Matrix CompositesElectrical Conductivity and Density of the Molten CaCl2-NaCl-Al2O3 Electrolyte MaterialsCharacterization of (Al2O3)p/Al Composites In Situ Synthesized by Direct Melt Reaction MethodStudy on Lamellar Precipitates of the Austenitic Valve SteelAnalysis on Chaotic Behavior in Rock Damage Rheological Process under Uniaxial StressDetection of Kaiser Effect in Marbles under Brazilian TestsPreparation and Characterization of Modified PVDF-g-PSSA MembraneInfluences of Micro-Arc Oxidation on Pre-Corroded Fatigue Property of Magnesium Alloy AZ91DStudy on Range of the Sampling Period of the Electro-Hydraulic Position Sampling Control System Based on PLCIn Air Template-Free Synthesis of In2S3 Hierarchical Nanostructure from InCl3?4H2O and ThioureaPreparation, Characterization, and Surface-Enhanced Raman Spectroscopy Activity of Spherical a-Fe2O3/Ag Core/Shell NanoparticlesDamage Progress Simulation in Unidirectional Composites by Extended Finite Element Method (XFEM)Quality Determination of Glass/Epoxy Prepreg by NIR SpectroscopyMultiferroic Bismuth Ferrite Nanoparticles: Rapid Sintering Synthesis, Characterization, and Optical PropertiesInvestigation for Test Sensitivity of ShearographyDesign of New Environment-Friendly Friction Material and Optimization of the Ratio MethodPreparation of Highly Pure Nano-Silver Colloids Modified by Polyethylene GlycolThe Optimization of the Technologic Parameter in Strong Cooling with Single-Tube on the A356 AlloyEffect of Friction Temperature on Spheroidization and Refinement of Si Particles in Hypereutectic Al-Si AlloysFlame Retardant Composites of Rare Earth Oxides/ Conventional Flame Retardants/ Silicone Rubber with Good Self-ExtinguishingGreen's Function Approach to Crossover Properties for Interaction Parameters of an N-Layer Ferroelectric Thin FilmPreparation and Characterization of BaFe12O19 Hollow Nanocrystalline AggregationsStructure and Performance of 35 Steel after Strengthened Shot Peening Surface Nanocrystallization and Gas Tufftriding ProcessAbsorptive and Biodegraded Polyurethane Foamed UreaStudy on Photodynamic Therapy for HL60 Cells Inactivation by Visible Light-Induced Fe-Doped Nano-TiO2 under Magnetic FieldTwo Nickel-Bipyridinedicarboxylate Organic-Inorganic Hybrid Materials: Hydrothermal Synthesis, Crystal Structure and Thermal PropertiesPerformance of the Self-Breathing Air Direct Methanol Fuel Cell with Modified Poly (Vinylidene Fluoride) Grafted onto a Blended Polystyrene Sulfonated Acid (m-PVDF-g-PSSA) MembranesEffect of Temperature and Inoculation on Structure Property of Chilled Cast Iron CamshaftExperiment Analysis on Transient Braking Factor of Drum BrakeStudies on Related ms Magnitude Rate Models in Triangular Wave Unloading Section of Calcium Medium-Fine SandstoneNumerical Simulation of Mixed-Mode Crack Induced Failure of Steel Plate Strengthened Concrete BeamResearch on Anti-Friction Mechanism of Ni60A/MoS2 Composite CoatingNumerical Simulation of the Reflective Crack Propagation Path for Open-Graded Large Stone Asphalt MixesThermal Decomposition Kinetic and Electrochemical Properties of KZn2(PO4)(HPO4)Design and Implementation of Electric Vehicle Power Lithium Battery Protection BoardMicrostructure and Mechanical Properties of Magnesium Alloy AZ81 with YttriumTitania-Phosphotungstic Acid Nanocomposites Dispersed Homogeneously in Mesopores as the Recyclable PhotocatalystFluorescence Enhanced Quantum Dots: Its Synthesis, Optical Properties, and Ecotoxicity ResearchEffects of Ultra-Fine Limestone Powder on Workability and Strength of High Strength ConcreteInfluence of Substrate Temperature on Structure and Optical Property of Cu3N Thin FilmsThermal Degradation of Hydroxyl-Terminated Poly(L-Lactic Acid) Oligomer into L-LactideEffect of Temperature on Structure and Corrosion Resistance of Oxide Scale on Hot Rolled StripAn Experimental Study of Bipolar Pulse Electroforming NickelThe Study of Liquid-Liquid Structural Transition of PbSnBi Ternary AlloyCrack Healing Behavior of 12%Cr Ultra-Super-Critical Rotor SteelExperimental Research on Bending Behavior of 2.5D Woven FabricsMicrostructures and Properties of Bainitic Nodular Cast Iron Treated by Controlled Cooling and Austempering TreatmentError Model and Simulation to Arbitrary Point of Automobile Panels in Normal Mechanical Parameter Measurement InstrumentEffective Thermal Conductivity of Composites with Different Particle Geometries and Interfacial Thermal ResistanceStudy on Structure and Magnetization of Spinel FerritesElement Selection and Meshing in Finite Element Contact AnalysisCharacterization and Thermal Behaviour of Polymer-Dispersed Liquid CrystalsExperimental Study on Polyphosphoric Acid (PPA) Modified Asphalt BindersEffects of Ultra-Fine Limestone Powder (LP) and Fly Ash Complex Adding on the Workability and Strength of ConcreteDevelopment on Microalloyed High Carbon Steel Used for Fracture Splitting Connecting RodsPreparation of Carbon-Coated Nano-Fe, Co Particles and their Effects on the Thermal Decomposition of Ammonium PerchlorateImmobilization of Radioactive Wastes into CaTiO3 Synroc by the SHS MethodBoron and Phosphorus Segregation Behavior at Grain Boundary in a Ti-If Steel after AnnealingPreparation and Properties of Nylon Composite Powder by Selective Laser SinteringEffect of Heating Temperature of Quenching on the Properties of TiCp/Fe CompositeIntegrated Innovative Technology for Micro-Manufacturing Based on Precision Cutting and Thin Films DepositionKinematics and Trajectory Tracking Motion Plan of an Unmanned BicycleCutting Line Design Method for Woven Composite Materials Fitting to Free SurfaceCorrosion Inhibition Mechanism of Magnetic Field on Carbon SteelParameter Simulation for Quenching and Pre-Stretching about Aluminum Alloy Thick Plates Based on MARC Finite ElementChloride Binding of Cementitious PastesResearch about Online Inspection System for the Assembly Quality of Automobile Gearbox Sliding BracketPreparation of Low Chlorine Shellac by Catalytic Hydrogenation with Pd/CStudy on Bio-Hydrogen Production of Different Fermentation TypesFeature Extraction of Machine Vibration Using Lifting Wavelet Denoising and EMD and its Application in Fault DiagnosisEffect of Volume Fraction of NiMnGa Powders on Magnetic-Field-Induced Strain in NiMnGa/Polymer CompositesPhotodegradation of Ammonia by TiO2 Nanoparticles Produced by Flame CVD ProcessThermal Insulation Behaviors of Rinforced Concrete Composite Wall with Inner Insulating LayerRecent Advances in the Bioactivities and Structural Analysis of Chondroitin SulfatePhase Transformation and Properties under Different Quenching Mediums of a X120 Pipeline SteelThe Microstructure and Enhanced Field Electron Emission Properties of Boron-Doped Nanocrystalline Diamond Films by Microwave Plasma Chemical Vapor DepositionNumerical Simulation in Soft Argillaceous Shale Geo-Material Based on Porous Elasto-Plastic ModelApplication of Calculus Equation in Solving Thermal Decomposition Kinetics Parameters of Fire-Retardant FoamA Novel Method for Estimating State of Charge of Lithium Ion Battery PacksOn Preparation of In Situ Composite Steel with Ultra-High Strength and its Thermal StabilityVisible-Light Activity Evaluation of p-n Junction Photocatalyst NiO/TiO2 Prepared by Sol-Gel MethodEffects of Nano-ZnO Power-Coated PVC Film on the Physiological Properties and Microbiological Changes of Fresh-Cut "Fuji" AppleSpline Subdomain Approach to Thermal Conduction Problem for Composite with Rectangular Shape ParticleExperimental Study on the Stitching Reinforcement of Composite Member with a Circular HoleStudy on Preparation and Properties of Nano-Modified PolypropyleneSynthesis, Characterization and Application Polystyrene-Bound Manganese ComplexesRepellent Effects of the Insecticide Based on Porous Starch and Fennel Essential Oil against Tribolium confusumEffect of Soft Foamed Polyethylene on the Property of Portable Mini-Cold StoragePb (II)-Imprinted Chitosan/TiO2 Hybrid Film for High Selectivity of Adsorption Lead Ion in Aqueous SolutionDevelopment of Nano-ZnO Coated Food Packaging Film and its Inhibitory Effect on Escherichia coli In Vitro and in Actual TestsThe Kelvin Probe Study on Initial Corrosion of Weathering Steel with NaCl DepositionPreparation and Characterization of Si3N4/TiCN Composite Ceramic Tool MaterialThermal Stability of Cotton Cellulose Modified with Flame RetardantsCharacteristics and Release Behavior of Sodium Alginate Microencapsulation Containing Cinnamon OilThe Effect of Formulation Variables on the Encapsulation Efficiency and SO2-Release Behavior of Microparticles Containing SulphiteAnalysis of Failure of 316L Heat Exchanger in a Producing Glycine Process Using Hydantoin MethodSimulation Experiment Research on the FRP Bolt under Eccentric LoadSynthesis, Characterization and Mechanical Properties of Hydroxyl-Terminated Hyperbranched Polymer Graft Polyether-Based Aliphatic Polyurethane ElastomerSmart Materials of Cured Epoxy Polymer Modified by 6F-PEEK with Shape Memory EffectSimulation of Size Effects in Material with Growth TwinsForming Limit Diagram of Stainless Steel-Aluminum Alloy CladMicrostructure and Mechanical Properties of Fly Ash Al-25Mg Composites Processed by Powder Metallurgy MethodEffect of Heat Treatment on Anticorrosion of Soft Magnetic Alloy Fe81Cr17Si1.5TiBReInfluence of Metal Cations on the Structure and Release Property of Layered Double Hydroxide-Ibuprofen Host-Guest MaterialsInfluence of Aging on Microstructure and Mechanical Properties of Wrought Magnesium AlloysAtomic Force Microscopy and X-Ray Photoelectron Spectroscopy Study on the Surface and Interface States of Liq and ITO FilmsPreparation on Low-Temperature Resistance Nitrile-Butadiene Rubber Coat-Metal Sealing GasketTribological Properties of Pb-Sn-CNTs Composite CoatingsMagnetic Induction Effect of Amorphous Ribbon Modified by Rare-EarthA Meso-Scale Simulation on the Effects of Temperature and Strain Rate on the Tensile Mechanical Behavior of Pure TitaniumFabrication and Growth Mechanism of Star-Shaped Gold Nanoparticles via Seed-Mediated Growth MethodImproved Computation Formula of Thermal Conductivity of Fibrous Porous MaterialsThe Operation Characteristics of Biohydrogen Production in Continuous Stirred Tank Reactor with MolassesThickening Mechanism of Crystalline Polyester Involved in Low Pressure Sheet Molding CompoundsGalvanneal Coating of Galvannealed Steel Sheet Fracture Research by Dynamic TensilityEffects of SiC Particle and Holding Time on Semi-Solid Microstructure of SiCP/AZ61 CompositesPrecipitate Structure in an Alumina Dispersion-Strengthened Copper Base Composite LayerElectrokinetic Phenomena of Sulfonated-Polyethersulfone Ultrafiltration Membrane Modified by TiO2 NanoparticlesPhase Evolution and Formation Mechanism in Acicular Mullite Prepared from Kaolinite via Wet Chemistry MethodPreparation of Nano-Al2O3-Coated ZrO2 Modified by Silane Coupling AgentThe Effect of Hydrothermal Treatment on the Micromorphology of Aluminum Sulfate Hydrolysis ProductResearch of G105 Chloride Ion Stress Corrosion CrackingStudies on a New Type of Crosslinked Polyacrylamide Bentonite CompositePreparation and Characterization of Nanometer Calcium Titanate Immobilized on Aluminum Oxide and its Adsorption Capacity for Heavy Metal Ions in WaterSynthesis and Characterization of Nanocrystalline ZnO Powders by a Novel Combustion Synthesis MethodMeasurement and Correlation for Solubility of D-Glucurono-1,4-LactoneEffects of Calcining Conditions on the Structures of Co-Doped VO2(M) NanopowdersImprove the Efficiency of White Organic Light-Emitting Devices Using Double-Doped SystemAdsorption of Methylene Blue from Aqueous Solution onto Peracetic Acid-Modified Loosestrife Powder - A New AdsorbentPhotoluminescence and Structural Characteristics of SnO2 Nanopetals Synthesized by Thermal EvaporationCharacteristics of Biohydrogen Production by Ethanoligenens Sp. R3 Isolated from Continuous Stirred Tank ReactorBeneficial Use of Fly Ash in Concrete Incorporating PCAExperimental Researches on Detonation of Aluminized Explosives to High-Speed Flyer ImpactResearch on Eccentricity Magnification Factor of Eccentric Compression Lightweight Aggregate Concrete MemberPreparation and Characterisation of an Aligned Carbon Nanotube Array on the Ni-Deposited Silicon SurfaceSemi-Solid Deformation of Al-Fe Alloy Prepared by Electromagnetic StirringPreparation and Research of Tussah Silk Fibroin/Hydroxyapatite CompositesThe Effects of the TiO2 Films Thickness on the Performance of Quasi-Solid Dye-Sensitized Solar CellsStudy on the Precipitated Behavior and Stability of the Strengthening Phase Al12(Fe,X)3Si in Al-Fe-Si-X Alloys with the EET TheoryAn Improved Method for the Synthesis of SAPO-41Effect of Anneal Time on Photoelectric Properties of SnS:Ag Thin FilmsResearch of Environmental Factors of Aluminum Alloys Atmospheric Corrosion Based on Grey Relational AnalysisCharacterization of ZnO Nano-Coatings on FibreboardIntegration of CuO Thin Film and Bi2Te3 for Enhancing the Thermoelectric Conversion Efficiency of Thermoelectric GeneratorA Micromechanical Model for Deformation Behavior of Nanocrystalline CopperGenetic-Fuzzy Optimal Design of Straw Crusher Based on Full-Feeding Combine HarvestersMeasuring and Modeling of Viscosities of Selected CaO-MgO-Al2O3-SiO2 SlagsAdsorption of Phthalate Esters (PAEs) from Aqueous Solution onto Activated Carbons from Softstem BulrushPreparation and Characterization of SiO2/VO2 Composite ParticlesPhase Evolution and Microwave Dielectric Properites in the Systems of (Mg1-xCax)2SiO4 CeramicsThermal Shock Stability of Large Size ZrB2 Ceramic Matrix Composite MaterialTechnique Based on an Innovative Design of CNC Turning CenterStudy on Microstructure Characterization of Al-N Codoping ZnO Films and Doping MechanismSteam Reforming of Simulated Coke Oven Gas over Ni/Al2O3-MgO Catalysts for Syngas ProductionThe Application of Calcium Sulfate Whisker in Styrene-Acrylic EmulsionsPreparation and Characterization of Marble/Unsaturated Polyester Resin Composite MaterialsEffect of Thermal-Oxidative Aging on the Mechanical Properties of Carbon Fiber Reinforced Bis-Maleimide CompositesResearch on Removal of Sulfide Inclusion in Steel Surface by Molten Salt ElectrolysisThe I-V Characteristics of the 3,3',5',5-Tetra-Tert-Butyl-Azobenzene Optical Molecular Switch: A First-Principles StudyThermal-Mechanical Analysis for Surface Cracks on FTSC SlabPreparation and Characterization of CuO-Doped ZnOEBSD Analysis of HAZ Microstructure Characteristics of a High Strength Low Welding Crack Susceptibility SteelPreparation and Investigation of Hydrophobic Mesoporous Silica FilmsCatalytic Reforming of Model Tar Compounds from Hot Coke Oven Gas for Light Fuel Gases Production over Bimetallic CatalystsSolute Pre-Precipitation and Phase Transformation in a Mg-Zn-Gd AlloyStudying on Preparation of AZO Thin Films with Sol-Gel MethodInvestigation on Generation Performance for Tubular Direct Methanol Fuel CellDetermination of Thickness for the Individual Layer of Strained P-Type Al0.11Ga0.89NGaN Superlattice by High Angle Annular Dark Field Scanning Transmission Electron MicroscopyWear Properties of Reaction Sintered B4C CompositesVibration Emulating and Measuring of Pipe System Being Filled with Liquid Ammonia in Chemical ShipTest on the Mortar Mix Ratio with Aeolian Sand of Mu Us DesertSEM Analysis of Non-Conducting Materials under Low Vacuum ConditionsEffect of Various Pretreatment Methods of Inoculum on Biohydrogen ProductionPrepared of Flower-Like CuO via CTAB-Assisted Hydrothermal MethodMorphology of the Diamond Thin Films Grown by Microwave Plasma Chemical Vapor Deposition with Different AftertreatmentsOptically Active Films Fabricated from Poly(Allylamine Hydrochloride) and R-(+)-1-Phenylethylamine Derivatives of Poly(Ethylene-Alt-Maleic Acid) with Different Degrees of SubstitutionThermal Property, Morphology, Mechanical and Rheological Properties of a Modified Bio-Polymers Prepared by Blending Poly(3-Hydrobutyrate-Co-4-Hydrobutyrate) with Chain ExtendersAn Ab Initio Study on Negative Differential Resistance in Pyrrole Trimer Molecular DevicePreparation and Characterization of Modified Activated Carbon and its Influencing Factors of Cd2+ AdsorptionOxidation Behavior of TiAl Based Alloys Prepared by Spark Plasma SinteringBehavior of Phosphorus Adsorption from Aqueous Solutions on Modified Activated AluminaA Novel Structure Design of Conductive and Magnetic Electromagnetic Shielding CompositesResearch on Optimization Design of the Lateral Stiffness Satio about the Frame-Supported Multi-Ribbed StructureProtection Capability of Different Confinement Plates for Rubber Composite Armours against Shaped ChargesPreparation, Characterization and Magnetic Properties of Fe59Co41 Alloy Nanowires Using AC Electrochemical DepositionEffects of Salt Corrosion and Freeze-Thaw Cycle on Rubberized Cement-SoilVOCs Decomposition Using Multiple Catalysis in Non-Thermal Plasma ProcessingDevelopment and Characteristic of Bacterial Cellulose for Antimicrobial Wound DressingDynamic Compressive Response and Failure Behaviour of CFRP Composites at High Strain RatesExperimental Study on Performance of Green Complex Binder of Low-Grade Fly Ash and Limestone PowderExperiment on C40 Machine-Made Sand Concrete with Combined Admixture of Limestone Powder and Substandard Fly AshPreparation and Characterization of MgCr2O4 Nanocrystals by Microwave MethodDuctile Damage Evolution Analysis of Lead-Free Sn-Zn Solder Based on Meso TopographyBehavior of Carbide Dissolution and Precipitation in WD1 Steel Used for Warm Work DiesPreparation and Characterization of Nanosized Barium-Strontium Titanate Immobilized on Aluminum Oxide and its Application in Separation of Cr(III) and Cr(VI)An Analysis of Slope Stability of Sand Embankment with Shear Strength Reduction (SSR) Method2D FE Modeling of Cracked Aluminum Plates Repaired with Adhesively Bonded Composite PatchesThe Preparation of ZnO Gas-Sensing Material by Nucleation-Crystallization Separation MethodMicrostructure and Mechanical Properties of Hot Rolled TRIP Steel Based on Dynamic Transformation of Undercooled AustenitePreparation and Characterization of Water Based and Double Enveloped Nano-Fe3O4 Magnetic FluidsRelationships between the Abilities of the Forming Bond of the Precipitated Phases and their Precipitations and Phases Transition in Al-Fe-Si AlloyErosion-Abrasion Behavior of Eutectic Al-Mn Alloy Matrix Composites Reinforced with Al2O3 ParticulatesFEM Analysis and Experimental Study for Bond Strength of High-Strength Coating by Wedged Load Test MethodEffects of Fe2+ on Fermentation and Biohydrogen Production of Biohydrogenbacterium R3 sp.nov.Hydrogen Production by Hydrolyzing Zn Nano-Particles in a Cyclone ReactorEffect of Minor Sc, Zr and Ti Additions on the Microstructures and the Mechanical Properties of Pure AluminiumResearch on Microstructure and Oxidation Resistance of Double Glow Plasma Discharge Surface Titanizing on CrZrCu AlloyEffects of Yttrium on Microstructure and Mechanical Properties of In Situ (Al2O3+Al3Zr)p/A356 CompositesSimulation on Displacement Characteristics of Variable Displacement of Double-Action Vane PumpStudy and Design of Sheet Metal Bending Springback Adjustable Die
Ab Initio Investigations of Electronic Structure and Optical Properties of Ag-F Codoped ZnOThe Influence of pH Values on Corrosion Properties of 316L Stainless Steel in Simulated Circulating Cooling WaterPhotocatalytic Activity of TiO2-NaY Composite Photocatalyst on Methyl Orange DegradationThe Influence of Particle Size, Concentration of Electrorheological Fluid on the Properties and Morphology of ERThe Stress Concentration Factor of Different Corrosion Pits ShapeNumerical Simulation of Forming Force in Lateral Bend FormingCrack Pattern of SRUHSC Column and SRC Beam Joint Subjected to Reversal Cycle LoadTiO2 and 5A Zeolite Composite Prepared for Photocatalytic Methyl Orange DegradationResearch on Surface Modified Micro/Nano-MgO Particles Improve Tribological Characteristics of Lubricating OilThe Coal Oxidized by HNO3 on the Conductivity Effect of Coal-Based PolyanilineMethods to Make Silicon and Silica LuminescentPreparation of C/SiC Composites by SLA-Intergrated Liquid Silicon Infiltration MethodStudy on the Relationship between Microscopic Structure and Mechanical Properties of HTPB Propellant3D Braided Geometry Structures Based on Space GroupElectrochemical Compatibility between Natural Graphite and Li6BaLa2Ta2O12 or Organic ElectrolytesCharacters of Expressway Widened Engineering Reinforced with GeotextileExpandable Tubing R&D on the Material of FMA Multiphase Alloy SteelDrying Shrinkage of Concrete Affected by Content of Stone Powder in Proto-Machine-Made SandMolecular Dynamics Simulations of Uniaxial Compression of Ceria and Gadolinia Doped CeriaThe Performance of Barium Sulfate/Nature Rubber Composites Using in Sport ShoesMicrocosmic Deform Incoordination and the Law of Limiting Strength Release during Shearing Failure of ConcreteMechanism Analysis of Rutting at Urban Intersections Based on Numerical Simulation of Moving LoadsA ZnO/Chitosan Composite Film: Fabrication and Anticorrosion CharacterizationA New Method for Manufacturing Composite Ingot of 3004/4045 Aluminum AlloyDesign and Implementation of BMS Based on STC12C5A60S2A Statistical Constitutive Model for the Strength of Brittle Fiber at Different Strain RatesExperimental Investigation of Microsegregation in Low Frequency Electromagnetic Casting of Al-4.5%Cu Binary AlloyHydrothermal Synthesis and Characterization of Single-Crystal Lead Titanate NanoflakesMechanical Wear of SnO2-C Morph-Genetic Composite MaterialsPreparation and Characterization of Shellac Fiber as a Novel Material for Controlled Drug ReleaseSynthesis of Star-Shaped PLA via Direct Melt Polycondensation: 1. Using L-LA as Starting MaterialThe Effect of Melt-Spinning Technology on the Degradation of Poly(Glycolic Acid) Fiber In VitroThe Fracture Research of Hexagonal Duralumin NutInfluence of Citric Acid on the Formation of Hydroxyapatite Powders by Using Ca(NO3)2-P2O5 Ethanol Solution SystemEffect of Heat and Wet Treatment on the Strength of PLA FiberApplication of a Coating Sensor to Aluminum Structural Crack MonitoringThe Research on Anti-Corrosion Property of Epoxy/Polyurethane Coating of Magnesium AlloysControllable Preparation of Multi-Morphology Nanosized Silica by Hydrolysis of Mixed Chlorosilanes in Mixed Solvent of Alcohol and WaterExperimental Study of Rolling Contact Fatigue Life of Zirconia Ceramic BallEffect of Tempering on Microstructure and Mechanical Properties of Ultra Low Carbon Heavy Steel Plate with Intercritical QuenchingEffects of Heating Period of Time on Tensile Property of Three-Dimension and Five-Direction Braided/Epoxy Resin Composites at High TemperatureAnalysis of Influence Rules of Material Composition on Compaction Characteristic of Asphalt Mixtures Using SGC TestsSimulation and Microstructure Predict during Hot Die-Forging of Cast Mg-7.0Al-0.2Zn Magnesium AlloyStudy on the Relationship between Transparency and Morphology of Shoushan StoneSynthesis of Star-Shaped PLA via Direct Melt Polycondensation: 2. Using D,L-LA as Starting MaterialSynthesis and Characterization of Fluorine-Substituted Hydroxyapatite Powder by Polyacrylamide-Gel MethodFamilies of Exact Solutions for Two-Component Bose-Einstein CondensatesMechanical Properties of Bulk Nanocrystalline Silver-Using Compression TestsDesign on Operating Conditions Date Acquisition and Remote Transmission System for Electric VehicleStudy on Preparation of Activated Carbon from Corncob Furfural Residue with ZnCl2 by Microwave IrradiationInfluences of Complex Modification of RE and P on the Microstructure and Impact Toughness of Hypereutectic Al-24Si AlloyElectrospun Antibacterial Chitosan/Poly (Vinyl Alcohol) Nanofibers Containing Silver NanoparticlesSynthesis and Properties of N,N-Dimethyl-O-Quaternary Ammonium ChitosanPreparation of High-Porosity NiTi Alloys by Powder Sintering with NaCl Pre-FormingAnalysis of Knuckle Arm's Fatigue LifeAntibacterial Property and Mechanism of Copper Alginate FiberPreparation of Chitosan/Cyclodextrin/Trisodium Citrate Nanoparticles for the Poor-Water Drug Carrier MaterialThe Influence of Electroless-Silver Coated Cenosphere Powders on the Electromagnetic Shielding Interference Effectiveness and Mechanical Properties of the Silicone RubberThe Influenceof Rare Earth Element on a-Solidification of A356 AlloyEffect of Intercritical Quenching on Microstructure and Mechanical Properties of Ultra Low Carbon Heavy Steel PlateStudy on the Supramolecular Interaction of Curcumin and RM-?-CD-mEffect of Niobium on the Microstructure and Mechanical Properties of Low Carbon Steel Plate with Intercritical QuenchingEffect of Combined Electromagnetic Field on Microstructure and Surface Quality of (Al2O3+Al3Zr)P/Al CompositesEffect of La2O3 on the Microstructure and Electrical Properties of (Ti,Sn)O2 Varistor CeramicsEffect of Cr Content on Impact and Abrasion Properties and Mechanisms of Low Carbon Alloy Steel at Corrosive ConditionA Novel Mixed Hydroxide Method for Hydroxyapatite PreparationProduction of Lactic Acid by Simultaneous Saccharification and Fermentation Using Steam Pretreated Lespedeza Stalks as Inexpensive Raw MaterialsStudy on the Forming and Self-Repairing of Ni60A/MoS2 Composite Lubricating FilmDevelopment of a Novel and Bi-Functional Quantum Dots as FRET Energy DonorElectronic Structure and Bonding Characteristic of NdMgNi4H4Microstructure and Mechanical Properties of Al-Cu-Mg-Ag Alloy during Thermal Exposed at Elevated Temperature
In Situ Fabrication and Properties of (Al3Ti)P/6351 CompositesMicro-Magnetic Field at the Surface of Surgical Materials for Biocompatibility ImprovementBiomass Biodegradable Food Boxes and Hot Temperature Field of Structural OptimizationStudy on the Thermal Decomposition Behavior of MgAl-Hydrotalcite CompoundsThe Configuration Design and Biodegradation Test of Biodegradable Material DishwareSupercritical Solvent Impregnation in Controlled-Release DrugsThe Influence of Elastic Modulus on the Adhesion of Fouling Organism to Poly(Dimethylsiloxane) (PDMS)Rheological Behaviour of Core-Shell Emulsion/Amine Crosslinking ProcessCytotoxicity and Antiviral Activity of Calcium Alginate Fibers and Zinc Alginate FibersStrength Development of Concrete with Proto-Machine-Made SandA Novel Synthesis of Acetophenone Benzopyran DerivativeInclusion Process of Curcuminoid-?-Cyclodextrin Complex and its StabilityResearch and Development of Deep-Sea Pipeline SteelPurification and Characterization of a Natural Lectin from the Seed of Peanut Arachis hypogaeaThe Yield Criterion for Processing Bamboo Fiber under Rolling Load
Toxoplasma gondii DNA Sensor Based on a Novel Ni-Magnetic Sensing ProbeControlling the Wall Thickness and Pore Size of SBA-15 by Using PPG and PEG as AdditivesStudy on an Air Filter Material Immobilized with Bio-AntimicrobialsPlasma Treatment on Silk Fibroin Powder/PU Blend FilmComparison of Ohmic Contact Characteristics of Different Metal on N Type 4H-SiCSynthesis and Application of Polyurethane Hydrogel Carrier on Nitrobacteria ImmobilizationPreparation of Eucommia ulmoides Leaves Antioxidant and its Antioxidation Activity In VitroFabrication and Characterization of a Toxoplasma gondii DNA Sensing SystemCombined Fireproof and Stuffing Materials Applied to Through-Floor PipesCapacitive Behavior of MnO2 Nanowires Prepared by Hydrothermal Synthesis MethodThe Experiment Study on Making Flame-Retardant by a Brucite in Liaoning ProvinceVacuum Flat Bed Filter Control System for Cold Strip Rolling MillExperimental Study on Frost Resistance Durability of Lightweight Aggregate Concrete in Na2SO4 SolutionRegeneration of Bagasse Cellulose by Ionic LiquidOrthogonal Experimental Study on Frost Resistance of Polypropylene Fiber ConcreteStudy on Thermal Conductivity of Organic Phase-Change Nano-FluidInfluence of Ultrafine Limestone Powder on the Performance of High Volume Mineral Admixture Reactive Powder ConcreteProcess of In Situ Cr Oxidation in Cu-Cr Pre-Alloyed PowdersStudy on Phase-Change Temperature and Latent Heat of Organic Phase-Change Nano-FluidOptimization of Machining Parameters on Tool Wear Rate of Ti-6Al-4V through EDM Using Copper Tungsten Electrode: A Statistical ApproachMorphological Control Synthesis and Characterization of Hydroxyapatite with Star-ShapedInvestigation on the Diffusion Behavior of Mo-Ni InterfaceResearch on Rheological and Thermal Properties of P(3HB-4HB)/PEG and the Preparation for FiberFailure Analysis and Strengthening Method for Circular Diamond Saw BladePreparation of Low Pt-Decorated Ru/C Catalyst and Electrochemical ResearchThe Corrosion Behavior about Two Ni-Based Alloys in CO2 / H2S EnvironmentsFirst Principles Calculations of Phase Stabilities of YNi2 and YMgNi4The Rebinding Properties of Bovine Serum Albumin Imprinted Calcium Phosphate/Polyacrylate/Alginate Hybrid Polymer MicrospheresSynthesis, Characterization and Properties of Poly(L-Lactic Acid-Co-a- Phenylalanine) Obtained by Direct Melting CopolymerizationCarbonation of High-Temperature Calcined Hydroxyapatite by Solid-Ion-Exchange ReactionSynthesis of Polyvinyl Formal Sponge for Wound Care Dressing ApplicationEffects to Active Composition of Tibetan Medicinal Materials with Twinkling Ultrasonic CavitationSynthesis, Characterization and Crystallization of Poly(Ethylene Glycol)-b-Poly(e-Caprolactone)Effects of Various Sugars on the Mineralization of Microbiologically Induced Calcium CarbonatePreparation of Biomorphic SiC by Reactive Infiltration of Gaseous Si into Carbonized MilletEffects of Fiber Mass Fraction and Alkali Concentration on Mechanical Properties of Biodegradable CompositesBiomorphic SiC Prepared from Carbonized Millet by Sol-Gel and Carbothermal Reduction ProcessingForecasting of Cutting Forces in Dental Adjustment of Ceramic Prostheses Using an Artificial Neural NetworkResearch on Corrosion Fractal Character of LY12CZ Aluminum Alloy Based on Image Processing TechniqueStudy on Band Gap Structure of One Dimensional Phononic Crystals?Modeling of Drug Release from Matrix Tablets with Process Variables of Microwave-Assisted Modification of Arrowroot Starch Using Artificial Neural NetworkSelf-Made Gas Diffusion Electrodes for Dye Wastewater TreatmentPreparation and In Vitro Evaluation of Carboxymethyl Konjac Glucomannan Coated 5-Aminosalicylic Acid Tablets for Colonic DeliveryThermo-Structural Analysis of CLAM Steel and SS316L in the First Wall for ITER during Thermal CyclingFinite Element Analysis on Structural Stress of Large Format InSb Infrared Focal Plane ArrayAlginate-Chitosan Microspheres for Controlled Release of Tea PolyphenolStudy on Glycoprotein in KiwifruitA Novel Scaffold from Recombinant Spider Silk Protein in Tissue EngineeringSemi-Solid A356 Alloy Slurry Prepared by Slightly Electromagnetic Stirring with Ti-Based RefinerStudy on the Plasma Beam Surface Remelting Modification of Nodular Cast Iron
In Situ TEM Observation of Phase Transformation for Bio-Medical Shape Memory TiNbSn AlloyEffect of Metal Particles on Spreading Properties of Sn0.7Cu Based Composite SolderBioactive Calcium Phosphate Coating on Carbon/Carbon Composites Prepared by Ultrasonicated Induction Heating DepositionCompatibility of L-Tyrosine Derived Biodegradable Polycarbonate/Chitosan BlendsPreparation of Novel Ag/Bacterial Cellulose Hybrid Nanofibers for Antimicrobial Wound DressingSynthesis and Cure Kinetic Studies of a New Trifunctional Imide OligomerExplore the Effects of Magnetic Field Intensity Change on Acidithiobacillus ferrooxidans Growth and MagnetismExtraction and Antioxidant Activity of Collagen from the Chinese Soft-Shelled Turtle (Pelodiscus sinensis)The Study of Manufacture of the New Type Coal Ash Ceramsite and Treating Landscape Waste Water with the New Type Coal CeramsitePreparation of Folate Conjugated O-Carboxymethyl Chitosan NanoparticlesThe Structure of PU/PNIPAAm Semi-IPN Prepared by Wet Phase Inversion ProcessPreparation and Characterization of Silver Powders with Spheric Shape and Different SizesEffect of La Addition on the Microstructures and Mechanical Properties of 7075 Aluminum AlloyThe Combustion Process and Characteristic Analysis of the Refined Oil-Water Coal Slurry in Diesel EngineFor Manufacturing and Assembly of the Product DesignThe Atomizing Experimental Study of the Refined Oil-Water Coal Slurry on the Diesel Engine of the Large-Scale ShipThe Preparation and Temperature Sensitivity of TiCN-Coated Aluminum Foil for CapacitorSolvent-Assisted Self-Assembly of ZnO Nanoparticles on Mica and its CharacterizationCalculation Methods on Crack Resistance Capacity of SRUHSC Column to SRC Beam Joint Subjected to Reversal Cycle LoadThe Experimental Research on the New Compound Inhibitor for the Coal HeapExperiment Study on Formula and Field of the Dust Suppressant for the Open Mine RoadFreeze-Thaw Durability of Portland Cement Concrete Subjected to Aircraft DeicerSoy Protein Based Biodegradable Flexible Polyurethane FoamEffects of Ultrasonic on Properties of Modified Soybean Protein-Based Adhesives for Duplex PaperResearch on the Calculation Method of Vertical Seismic Capacity of the Multi-Ribbed Composite SlabThe Series K Criterion of Unstable Fracture of Concrete and its ApplicationStudy on Strength Distribution and Failure Probability Estimation of Structural Part of Foam MaterialPolyaniline/Epoxy Composite Emulsion Coatings for Anticorrosion to Mild SteelPreparation of Hyper-Branched Polymer and its Application in Synthetic LeatherEffect of Sintering Technology on Ag/AgCl Electrode Potential StabilityEffect of Load on Linear Reciprocating Sliding Friction and Wear Behavior in Zr-Based Bulk Metallic GlassHeat Transfer Characteristics in Exhaust Port for Hydrogen Fueled Port Injection Engine: A Transient Approach