Nano-Scale Materials, Materials Processing and Genomic Engineering

Fabrication and Characterization of Integrated Ultrahigh-Density Pt Nanowire Arrays within the AAO TemplateStability of Nanofluids for Heat PipePolyaniline Grafted Amino-Functionalized Graphene Nanocomposite with Excellent Electrochemical Performance for Supercapacitor Electrode MaterialsSolid-State Synthesis and Thiophanate Methyl Visible Light Degradation of Magnesium Doped TiO2 Mesoporous NanomaterialEffect of Dysprosium Content on the Magnetic Properties of Nanocrystalline (Pr0.25Nd0.75)10-xDyxFe82Co2B6 AlloysFabrication of Microfibrous Patterns via ElectrospinningPreparation of 1D or 3D Nano ZnO Crystals in High-Viscosity SolventEffect of the Ce-TiO2/Diatomite on the Photo-Catalysis Degradation of MBEffect of Aging Temperature on Microstructure and Hardness of CoCrFeNiTi0.5 High Entropy AlloyMicrostructure and Properties of Ni70.2Si29.8 Eutectic Alloy Produced by Directional SolidificationFe-Based Bulk Metallic Glass with Good Soft Magnetic PropertiesHardness Regulation of Fe-Based Amorphous Composite Coatings by Laser RemeltingInfluence of Laser Remelting on the Corrosion Resistance of Fe-Based Amorphous Composite CoatingsMicrostructural Evolution and Hardness of CoxCrCuFeNi High-Entropy AlloysResearch of Crystallization Kinetics and Thermal Stability of W48.5Ni34Fe14.6B2.9 Amorphous RibbonsTEMPO-Mediated Oxidation of Bacterial Cellulose in Buffer SolutionFacile Preparation of Gradient Structure Bacterial Cellulose Using Potato StarchPreparation and Properties of Cotton Fiber/Poly(lactic acid) CompositesEffect of Two-Step Treatments on Interfacial and Mechanical Properties of Sugarcane Rind Fiber/Natural Latex Biodegradable CompositesAnti-Corrosive Epoxy Primer Modified with Nano ParticlesPreparation and Characterization of TPU Toughened PLA Elastic FibersPreparation and Biological Characterization of Electrospun Aligned Poly(butylene carbonate) Nano-FibersFabrication and Properties of Porous Scaffolds of PLA-PEG Biocomposite for Bone Tissue EngineeringPreparation and Characterization of Ethylene-Octene Copolymer/Modified Nanosilica Composites by Radiation ProcessingMorphology Control of Polyimide Fibers by Phase Separation under Different Coagulation Bath ConditionsImproving Preferred Orientation and Mechanical Properties of the PAN-Based Carbon Fiber Precursors by Using Saturated Steam Stretching ProcessFacile Fabrication of Super-Hydrophobic Surface on Aluminum and its Effects in Accelerating Underwater Bubble BurstingRaman Spectroscopy Studies on the Microstructure Evolution from Cellulose to Carbon FiberDesign of ACF Microwave Absorbing Composites with Triangle Patches and Circular Aperture ElementsStudy on the Properties of Melamine Cyanurate Modified Polyamide 6 Nanocomposites with Different Dimensional Siliciferous ParticlesPreparation and Properties of Recycled-Polyester Nanocomposite Fibers Synergistic Modified with Phosphorus Containing Flame-Retardant and a-Zirconium PhosphateStudy of the Hydrophobic Properties of the Surface of an Enamel MaterialPreparation and Properties of BC/PPy/TiO2 Composite MembraneCellulose Nanofiber-Supported Polyaniline Nanocomposite Conductive Film and its Conductive PropertiesGlutaraldehyde-Cross-Linked Poly(acrylic acid-co-acrylamide)/Poly(vinyl alcohol) Superabsorbent MembranesPreparation and Characterization of Poly(vinylidene) Fluoride Membranes Reinforced by Modified Nano-SiO2 ParticlesPreparation and Characterization of Polyacrylonitrile Membranes with High Strength via Thermally Induced Phase Separation ProcessApplication of Orthogonal Design on Optimization of Spinning Conditions for BTDA-TDI/MDI Ternary Copolyimide FiberPreparation and Characterization of Polyacrylonitrile in Aqueous Slurry PolymerizationStudy on Poly(Ether Imide)/Amino-Modified Sillica Hybrid MembranesStrontium-Substituted Hydroxyapatite Nanocrystals Synthesized in Ultrasonic Field: Use for Protein AdsorptionA Novel Method for the Synthesis of Amphiphilic Copolymer: PHEMA-b-PDMS-b-PHEMASynthesis of Allyl Functionalized Telechelic PVP by Reversible Addition-Fragmentation Chain Transfer (RAFT) PolymerizationEffect of Additive on the Performance of PVDF Membrane via Non-Solvent Induced Phase SeparationStudy on Preparation and Property of High Thermal Oxidation Stability PPS/SiO2 FiberStudy on Spinnability of UHMW/PAN Dope in DMSOFabrication of Polyvinylpyrrolidone/Boehmite Nanofibers by ElectrospinningThe Effect of Bacterial Cellulose (BC) Fiber Content on the Properties of BC Fiber Reinforced NanocompositesPreparation and Study on Nano-Ag/SnO2 Electrical Contact Material Doped Rare Earth ElementEffects of Cold Rolling Reduction on Deformation Modes in Mg-3Al-1Zn Magnesium AlloyStudy on the Flow Field of Friction Stir Welding of AZ31 Magnesium Alloy Based on the Temperature VariationEffect of Brazing Flux Pb on Microstructure and Mechanical Property of CMT Weld-Brazed Lap Joint of 5052 Aluminum Alloy to Galvanized Q235 SteelInfluences of Carbon and Nitrogen Content on the Precipitation of 18Cr18Mn SteelStudy on Pack Rolling and Annealing Process for Ultra-Fined Grain Austenite Stainless SteelEffect of Deformation Ratio on Microstructures and Properties of High Nitrogen Martensitic Stainless SteelMicrostructure Evolution in Isothermal Heat Treatment of 0Cr32Ni7Mo4NDuplex Stainless SteelEffects of Melt Cyclical Superheating Conditions on the Microstructure of FeSi2 AlloyMicrostructure and Mechanical Properties of Cold-Rolled Mg-6Al-1Zn Alloy Strip Treated by Electropulsing TreatmentRecrystallization and Precipitation of ?-Mg17Al12 Phase of the Cold-Rolled Mg-9Al-1Zn Alloy Strip during Isothermal AnnealingSliding Wear Behavior of Forged, Uncoated and Laser Nitrided LMD TC18 Titanium AlloyInvestigation on Micro Components Fabricated by Micro Powder Injection MoldingEffect of Temperature on Low Energy Consumption Electrolytic Preparation of Manganese Dioxide Using Oxygen Depolarized ElectrodeHydrodynamic Lubrication during Non-Sinusoidal Oscillation for a Continuous Casting MouldPhysical Properties, Compatibility and Morphology of Hydrogenated Nitrile Rubber/Fluoroether Rubber BlendsElectron Beam Additive Manufacturing and its Applications in Aerospace FieldMicrostructure and Mechanical Properties of Brazed Tungsten/Steel Joint for Divertor ApplicationsInvestigation on the Micro-Structures and Properties of the P20 Steel Surface after Electrical Discharge MachiningDevelopment and Application of Multivariable Composite Controller Based on Fuzzy Switching for Ultra Fast Cooling SystemEffect of Ti Content on the Microstructure and Properties of TiC/TiB2-FeNiCr Composite Prepared by Thermite ReactionHot Compression Deformation Behaviors and Microstructure Evolution for Brittle Au-20Sn Eutectic AlloyMagnetic Properties of Cyano-Bridged Compound Co [Fe(CN)5NO]?5H2OMagnetic and Mo?ssbauer Studies on Mixed-Metal Cyano-Bridged Compounds GunM1.5-n[Fe(CN)6]?xH2O(M=Ni, Gu)Microstructure and Mechanical Properties of Plasma Arc Welding Joint for Laser Melting-Deposited AerMet100 Ultrahigh-Strength SteelFabrication of Cu Heat Sink on Silicon Substrate Using Direct Laser SinteringMicrostructure Evolution of Laser Direct Deposited Ti-5Al-2Sn-2Zr-4Mo-4Cr Titanium AlloyPreparation of MAO Ceramic Coating on Ti-6Al-4V Alloy SurfaceProperties of TiAl/TiAlN/TiAlCN Films Deposited by Arc Ion Plating on GCr15 RingsMicrostructure, Mechanical and Tribological Properties of the Tialn Coatings after Nb and?C Dual Ion ImplantationLaser Ablation Resistance Behavior of Organosilicone Composite Coating on Various SubstratesEffect of CO2 on Anti-Corrosion Property of a Polyurea Coating Modified with OrganosiliconeProgress in Novel Composite Thermal Barrier CoatingAssessment of Mobilities of the B2 Phase in the Nickel-Chromium-Aluminum SystemDiffusion Behavior of Interface between 6061 Aluminum Substrate and Ni?5wt.%Al CoatingElectrochemical Impedance Spectroscopy (EIS) Study of Nano-Composite Polyurea Coating under the Wet-Dry Cyclic ConditionsInvestigation of Morphology and Electrical Properties of Contact Materials after Airtightness TestResearch and Application Status of Atmospheric Plasma Spray Torch in Internal Feedstock ModeMicrostructure and Properties of Zirconia Co-Doped with Yttria and Cenosphere Coating Prepared by Air Plasma SprayingSHS Reactive Arc Spray - A New Method to Prepare Multiphase Ceramic CoatingsAnti-Ablation Property of MoSi2 Coatings Deposited by APSMicroscopic Phase Field Study on the Kinetics of Order-Disorder Transition of APDBs Formed between DO22 Phases during Stress AgingMolecular Dynamics Simulation of Porous Layer-Induced Stress in a-Iron Single Crystal and Twin CrystalHelium Diffusion in Tungsten Studied by Molecular Dynamics MethodMultiple Helium Atoms Diffusion in Tungsten: A Molecular Dynamic SimulationModeling of Flow Fields of Different Delivery Chamfers in Spray Forming ProcessPrediction Model of Pressure Distribution under Floating StripsFEM Analysis of the Deformation Behavior at Thickness Direction in Laboratory Plate Hot RollingPrediction of the Hardness of Cu-3Ti-1Cr Alloy Using Least Square Support Vector MachinesPrediction Model for Adhesive Thickness-Dependence of Bonding Structures for Aeronautic Lightweight AlloyApplication of Dynamic Deadband Eccentricity Filter in GM-AGC SystemA Calculation Model of Carbon Diffusion Coefficient in the Austenite for Spheroidal Graphite Cast IronDesign and Realization of the Process Tracking System for Plate PlantMacroscale Modeling of Multi-Physics Fields during Vacuum Arc Remelting of Ti-6Al-4VCrystal Plasticity Finite-Element Simulation of Single Phase Titanium Alloy with 3D Polycrystalline ModelsCompression Property of C/SiC and Inconel X-750 Springs from Room Temperature to 1000?CElectrochemical and Salt Spray Corrosion Behavior of Copper Alloy Contact Wires in Chloride SolutionFractographical Investigation on High-Cycle Fatigue Behavior of Direct Aging GH4169 SuperalloyStudy on Corrosion Resistance of Several Fe-Based Amorphous AlloysSynthesis and Characterization of Itaconic Acid Doped Polyaniline NanorodsSynthesis and Characterization of Monodisperse and Micro-Structured Polyaniline by Soap-Free Emulsion PolymerizationEffect of Two Heat Treatment Processes on Microstructures and Tensile Behaviors of Ni-Based Superalloy K465