Materials Research

Evaluation of Atmospheric Corrosivity by ACM TechniqueRemoval of Cu2+ from Aqueous Solution by Alkaline-Activated Konjac GlucomannanSynthesis and Characterization of Titania Nanoribbons for Lithium Selective AdsorptionMultiple Imputation for Missing Data in Life Cycle InventoryThe Controlling Factors in the Content of Cr6+ in Green Strontium Ferrite Experimental Study on Macro-Kinetics of Flue Gas Desulfurization Using Pyrolusite Pulp by a Double Magnetic Stirred ReactorCopper Electrowinning from Gold Plant Cyanide-Containing SolutionPreparation and Properties of Alginate Salt Fibers: An Inherent Flame-Retardant, Biodegradable FiberUsing Demercurated Lighting Phosphor and MSWI Scrubber Residues to Prepare High Performance Plastic ConcreteDirectly Synthesis of Polymeric Nano-Composite from Waste Solid Absorbents of Treating Styrene Monomer-Containing Waste GasFast Removal of Pb2+ from Aqueous Solution by Water Insoluble Konjac GlucomannanExperimental Study of the Mechanical Properties of Hybrid Fiber Reinforced Concrete Application Study of Polypropylene Fiber Reinforced Concrete Railway Tunnel Lining Structure within Hard Rock Mass Using Wet-Sprayed TechniqueStudy on the Moisture Absorption Properties of Poly[acrylate-co-methacrylate]Modelling Flue Gas Desulfurization Using Pyrolusite Pulp in a Jet Bubbling ReactorEnhancement Corrosion Resistance of Two (Vinyl)Silsesquioxane Hybrid Films and their Validation by Gas-Molecule Diffusion Coefficients Using Molecular Dynamics SimulationSilsesquioxane Materials as Sun Protection Factor Ingredients and as Films for Greenhouse Covers Influence of Pore Size on Enzymes Adsorption in Mesostructure Cellular Foams (MCFs)Property and Influence of Membrane on the Absorption Efficiency of Sulfur Dioxide from Flue GasApplication of Inorganic Clay in Preparation of Coated Water-Transmitting FiberThe Application of Aqueous Span 80 Composite Material in Methane Absorption and Explosion SuppressionBio-Effects of Nano-Titanium Dioxide on Lungs of MiceAnticorrosion Behaviors of Quaternary Polyethyleneimine in Acidic Environment Preparation of Ca-Substituted a-Sialon Eco-Materials by Utilizing Tungsten Molybdenum Bismuth Polymetallic TailingsSelective Deposition of Titanium Dioxide Thin Film on Glass Monolayers by Impregnating MethodEffect of Red Mud on Mechanical Properties of Loess?Containing Aluminosilicate Based Cementitious MaterialsStudy on the Electrochemical Behavior of Ferric Stearate and its Electro-Catalytic Oxidation of Hydrogen Peroxide Surface Modification of Super-Fine Magnesium Hydroxide Powder and it?s Flame-Retardant Treatment of Flexible PVCMiscibility Evaluation of LDPE/EVA Blends Filled with Lignin by Rheological Properties and FT-IRAFM Study of Untreated and Treated Fibers of Mongolian Goat Cashmere Development of Alkali Activated Slag Cement Based Ecomaterial and its Environmental Coordination EvaluationStudy on the High Performance Coal Gangue Foam ConcreteEnhancement Corrosion Resistance of (3?Glycidoxylpropyl)- Silsesquioxane Hybrid Films and its Validation by Gas-Molecule Diffusion Coefficients Using MD Simulation Modified PLA Carrier Material and its Performance in Immobilization of Nitrifying BacteriaEffect of Electromagnetic Stirring on Tin Bronze Plate BlankEffect of TiO2 on the Thermal Conductivity of Eco-Friendly Silica Bricks Fabricated by Yellow River SiltPreparation, Characterization and Oxidation Mechanism Study of Biomorphic Porous Carbon Coated with SiC Gradient CoatingPreparation of Titania Cloth Using Cellulose Fabric as the TemplatePhotocatalytic Degradation of Organic Dye on Sulfated Nanosize TiO2 Sensitized by H2O2 under Visible irradiationSynthesis of TiO2 Nanorod-Assembled Microspheres from TiCl3 and its Photocatalytic ActivitiesStudies on the Active Oxygen in Zinc Oxides with Different MorphologiesSynthesis of Cerium Oxide Nanoparticles by the Precipitation MethodHydrothermal Synthesis of Self-Assembled-Microfibers with Rutile Single Crystal Titania NanorodsPhoto-Oxidative Degradation of Metallocene Linear Low-Density Polyethylene Preparation and Photocatalytic Activity of Fe-Doped TiO2 NanopowdersStudy of High Co Superhard High Speed Steel SurfaceSynthesis and Characterization of Rare Earth (Sm,Y) Light Conversion Film Effect of the Superfine SiO2 Powder Content on the Properties of SiC CompositesSynthesis of O'-SiAlON/SiC Ecomaterials by Using Non-Traditional Resources: Yangtze River SandInvestigation of the SCR Catalyst Ce-V/TiO2Preparation of Eco-Friendly Composite Ceramic from Iron Ore TailingsSynthesis of Brookite-Typed Titania from Titanium Chloride SolutionPreparation and Characterization of TiO2 Nanowires on Aluminum SubstratePhoto-Catalytic Activity of Cu2O Films with Various Crystal Structures Prepared by DC Reactive Magnetron SputteringInfluence of Silver / CNTs on Epoxide Resin Based Conductive AdhesiveDegradation of Harmful Gases in Air by Ce3+/TiO2 Complex NanomembranePhotocatalytic Activity of TiO2-C Composites under the Visible LightEffect of TiO2 Nanoparticle on Thermal and Tensile Behavior of Polypropylene/ Polylactic Acid CompositeFabrication of Plasma Treated Nano Zinc Oxide/PP/PLA Composites Filaments Using Melt SpinningBioavailability and Speciation of Cd, Pb, Cu, and Zn in Sewage Irrigated Soils in the Southeastern Suburbs of Beijing Study on Properties of Quasi Solid Polymer Electrolyte Based on PVdF-PMMA Blend for Dye-Sensitized Solar Cells Low-Temperature Plasma Deposition of Diamond-Like Carbon and III Nitride Thin-Films for Photovoltaic DevicesExperimental Study on Solar Photovoltaic System with Compound Parabolic ConcentratorO2 Reduction Reaction Activity of MN4 Spherical Polymeric Cobalt PorphyrinThe Study of Boron-Doped Nanocrystalline Silicon Film with High ConductivityInfluences of Stabilizers on the Microstructure and Properties of Sol-Gel Tin Doped Indium Oxide Thin Films Analysis of Improved Photoelectric Properties of Copper Phthalocyanine/C60 Organic Solar Cells: Effects of Substrate TemperaturePreparation and Research on TiO2/SiO2 Nanofilm with High Transmittance on Solar Cell GlassOne-Step Sintering of CoSb3 Thermoelectric Material and Cu-W Alloy by Spark Plasma SinteringThermoelectric Properties of Bi0.5Sb1.5Te3 Prepared by the Ultrarapid Quenching ProcessThermoelectric Properties P-Type Si-20 at % Ge by Addition of TiN Nanoparticles Effect of B2O3 on Long-Last Phosphorescence of SrAl2O4:Eu2+,Dy3+Analysis and Design of High-Speed Flywheel on Satellite Energy Storage/Attitude Control SystemPolyamide as a Matrix for the Creation of Form-Stable Phase Change MaterialsResearch on Technology of Blast Furnace Energy Saving and Optimization of Operation PrincipleStructural Study on Ammonia Borane for Hydrogen StorageSegregation Effect on Nanoscale Mg - Based Hydrogen Storage MaterialsSynthesis and Transport Properties of Polycrystalline Co-Filled Type-I Clathrate Compound (Sr,Ba)8Ga16Ge30Deposition and Characterization of GaN Films on ITO Glass Substrates by PECVDApplication of ANN Back-Propagation for Fracture Design Parameters in Extra-Low Cycle Rotating Bending FatigueProcessing 20 Ply Clad Plate by Accumulative Clad Rolling from Stainless Steel/Aluminum/Aluminum Alloy?/Stainless Steel Sheets Preparation of Nanosize Iron Pyrite FeS2 and its PropertiesAntibacterial Behavior of Ag-Ce-TiO2 Composite Films in the Different IrradiationsElectrochemical Performance of Tin-Aluminum Thin Film Anodes for Lithium Ion BatteryNanocomposite Hydride LaNi5/A- and Mg2Ni/A-Type Materials (A=C, Cu, Pd)Optimizing on the Negative Electrode of Ni/MH Power Battery by Orthogonal DesignCNT-CoO Complex Conductive Agent for the Positive Electrodes of MH/Ni BatteriesPreparation for the Hollow Nickel Fibres of the Positive Current Collector by Electroless Plating TechniqueEffects of Mg2+ Doping on the Properties of LiFePO4 Synthesized via Hydrothermal RoutePreparation of PPy/CNT Composite Applications for Supercapacitor Electrode MaterialInvestigation on Lithiation Mechanism of Interphase Ni3Sn4 Alloy Used as Anode Material for Lithium-Ion BatteriesPVDF-PAn Co-Polymer with High Permittivity Fabricated by Emulsion PolymerizationStudy on 1/f? Noise Characterization of Metallic Interconnection ElectromigrationThermodynamics of Oxidation on Pb-Free Solders at Elevated TemperatureFormation Enthalpy, Free-Energy and Activity Coefficients of Sn-Pb Eutectic Solders Effect of the Content of Cu on Solderability and Mechanical Properties of Bi5Sb Solder AlloyProduction and Properties of a 90%Si-Al Alloy for Electronic Packaging ApplicationsInfluence of Mg and Si in the Aluminum on the Thermo-Physical Properties of Pressureless Infiltrated SiCp/Al CompositesInvestigation on Wear- and Corrosion Resistance of TiN Films by CVDFabrication and Properties of Aluminum Nitide Ceramics Doped Carbon NanotubesInvestigation of Nano/Microcrystalline Diamond Composite Films for Thermal Applications Research of a Novel MEMS Vector Hydrophone Based on a New Package ProcessFretting Tribology of Al2O3/Cu Composite Prepared by Powder MetallurgySynthesis of Carbon Nanofibers: A Catalyst Derived from Cupric Carbonate Basic during Acetylene DecompositionSelf-Assembly Growth and Size Control of Silver Nanocrystals for Nonvolatile Memory ApplicationsStudy on the Microstructure and Deformation Behavior of Ultrafine-Crystalline Cu-Y RibbonsCorrelation Between Lattice Strain and Energy Gap Bowing of AlxGa1-xN Epitaxial Thin FilmsFabrication and Properties of Large-Area Silicon Nanowire ArraysA Novel Inorganic Ion Conductor Electrochromic Device: MoO3/LiAlO2/NiOxPhotoluminescence Properties Influenced by Calcining Condition and Doping Concentration of Nano-Sized ZnGa2O4: Cr3+Study of a New Chromium Carbide Reinforced Ni3Al Matrix Composite Hardfacing Material on IC6SXMicrostructure Characterization of the Cu-Ti-C Composites Prepared by Mechanical Alloying and Spark Plasma SinteringFinite Element Simulation of Effects of Process Parameters on Deposition Rate of SiC by Chemical Vapor DepositionStudy on the Tribological Properties of Low-Power Plasma-Sprayed Al-Cu-Cr Quasicrystalline CoatingPorosity Ratio and Anti-Corrosion Properties of Cr/CrN Films Synthesized by Unbalanced Magnetron SputteringThe Lubrication Properties of Diamond-Like Carbon Coatings in Engine OilInfluences of Heat Treatment on Microstructure and Creep Properties of Ti6Al4V AlloyEffect of Trace Element Erbium on Corrosion Resistance Properties of Al-Zn-Mg-Cu AlloyStrength Properties of Thin Alumina Coatings on 4043 Aluminum AlloyThermodynamic Research on Solution Properties of Al-Er AlloysResistance Spot Welding Process of Galvanized Steel Sheet Based on Regression ModelingEffect of C Content on Properties and Microstructure of Steel-Bonded Cemented Carbide GT35 Produced by In Situ Reduction of IlmeniteNano Effects of Helium Plasma Treatment Nano SiO2 Coating Kevlar FilamentsNano Effects of Helium-Plasma Treatment Nano-SiO2 Coating VectranNano Effects of Oxygen-Plasma Treatment Nano-SiO2 Sol-Gel Coating T-300 Carbon FiberNano Effects of Helium-Plasma Treatment Nano-SiO2 Sol-Gel Coating UHMWPE FilamentsNano Effects of Helium Plasma Treatment Carbon Nanotubes Coating Basalt Filament Effects of Fiber Surface Treatments on the Moisture Absorption and Interfacial Properties of Natural Fibers and their CompositesNew Method for Improving Formability of AZ31B Magnesium Alloy SheetsStudy of the Effect of Microstructure on the Anisotropy of AZ31 Magnesium Alloy Thin SheetComparison of As-Cast Microstructures and Mechanical Properties for Mg-Ce-Mn-Sc and Mg-Ce-Mn-Zn Magnesium AlloysEffect of the Thickness of Dies for the Solidification Balance of Permanent Mould Casting AZ91D Magnesium AlloyStudy on the Filtering Purification of AZ91 Magnesium AlloyOretical Analysis of Filtration Purification of Mg Scrap MeltEffect of Sr and Nd on Microstructure and Mechanical Properties of AZ91-1Si AlloyEffects of Strontium Addition on Microstructure and Properties of AE42 Magnesium AlloyChoice of Bubble Radius in Floatation Refining of Magnesium Alloy Computer Simulation and Optimization of Equal Channel Angular Extrusion of AZ31 Magnesium AlloyEffect of Solid Solution Time on the Microstructure and Mechanical Properties of AZ81-4Gd Magnesium AlloyA Study of Hot Extrusion of 6063 Aluminum Alloy-Clad AZ31B Magnesium Alloy BarComparison of Microstructure and Mechanical Properties between ZM21 and ZME210 with Different Hot Extrusion Ratios Mechanical Properties and Microstructures of Mg-Al-Zn Alloys with High Aluminum ContentsPreparation of Semi-Solid Billet of ZW61 Alloy by Equal Channel Angular Extrusion Microstructure and Mechanical Properties of an Mg-Zn-Zr Alloy Modified by Rare Earth of ErbiumDeformation Behavior and Dynamic Recrystallization of As-Cast Mg-Y-Nd-Gd-Zr Alloy: A Study with Processing MapMechanical Properties and Microstructure of AM140 Magnesium AlloyResearch on the Microstructures and Mechanical Properties of Annealed Cold Upsetting AZ31 Magnesium AlloyDamage Evolution Equation of AZ31B Magnesium Alloy during Superplastic DeformationUpper-Bound Analysis for Change-Channel Angular ExtrusionResearch on the Rolling of AZ31 Strip Prepared by Twin Roll CastingFirst-Principles Study of the Mechanical Properties of Mg-Based Alloys with FCC and Hexagonal StructureFriction and Wear Properties of Magnetron Sputtered DLC/SiC Films on Magnesium Alloy Mechanical Testing and Numerical Simulation of the Fracture Toughness of Magnesium Alloy AM60 under Impact LoadingBonding of AZ91D Mg Alloy and Al Metal with Mg-Al Eutectic Alloy and its Application in Al Coating on AZ91D Mg AlloyEffect of TiN/CrN Multilayer Coating by Cathodic Arc Deposition on Wear and Corrosion Behaviours of AZ91D Magnesium AlloyPreparation of Aluminum-Magnesium Alloys from Magnesium Oxide by Molten Salt Electrolysis MethodStructures of Zinc-Manganese Phosphate Film and Organic Coating on Magnesium Alloys Effect of Ga on the Microstructure and Mechanic Al Properties of AZ81 Alloy Morphology of a-Mg3Sb2 Precipitates in Mg-Sb Binary AlloysThe Anticorrosive Properties of Sol-Gel Coating on AZ31 Magnesium Alloy Study on the Technology of the Environment-Friendly Conversion Coating Containing Phytic Acid for Magnesium SurfaceMicrostructures and Properties of Fiber Laser Welded ACM522 Magnesium Alloy JointResearch on Grinding Force and Surface Roughness Based on the Abrasive Belt Grinding to Magnesium AlloyA Study on Corrosion Inhibitor for Magnesium AlloyInfluence of KH-550 Silane Treatment on the Corrosion Resistance of AZ31 Magnesium AlloyAnalysis on the Weld Defects of the AZ91D Magnesium Alloy JointsPreparation and Property of the Environment-Friendly Anodizing Oxidation Coating of AZ31 Magnesium AlloyStudy on Corrosion and Degradation Behavior of Mg-Ca Alloy in Simulated Body Fluid Effect of Al Content on Hydrogen Storage Properties of Amorphous Mg1-xAlxNi (x=0, 0.1, 0.2, 0.3) AlloyConstitutive Description for Drawing Limit of Magnesium Alloy Tube Based on Continuum Damage MechanicsMechanochemical Synthesis of Nanocrystalline Mg-Based Hydrogen Storage Composites in Hydrogen Alloying MillsSynergistic Effects of Al and Cr Addition on Microstructure of Mg2Ni Hydrogen Storage AlloyResearch on Corrosion Resistance of Mg-Al-Sr AlloyStudy on Expansion of Cement-Based Material with Addition of Magnesium OxideFinishing Advanced Surface of Magnesium Alloy Tube Based on Abrasive Belt Grinding Techology Thermal Analysis on Vacuum Synchronous Reduction for the Preparation of Mg-Sr Alloy Effect of Plasma Interface Treatment and Cathodic Electrophoretic Coating on Mg Alloys Experimental and Theoretical Study of the Cyclic Relaxation of Die Cast Magnesium AlloyDevelopment of Surface Treatment in Industrial Scale for Components with Metallic Luster on AZ31 SheetsEffect of SF6 Cover Gas Humidity and Concentration on Efficient Protection of Molten Magnesium
In Vitro Cytotoxicity Study of the Nano-Hydroxyapatite/Bacterial Cellulose NanocompositesFunctionality of Ti-O Thin Films Doped by Phosphorus: Wettability, Semiconductor Performance and Blood CompatibilitySilicon Nitride Surface Modification and Cell AdhesionImprovement of Tribological Behaviour of Biomedical Nanocrystalline Titanium by Magnetron Sputtered DLC/SiC Double Layer FilmsFabrication of Novel Cellulose/Chitosan Artificial Skin CompositePOSS/TiO2 Nanohybrids as Sun Protection Factors for Skin Changes Caused by Ultraviolet A RadiationPreparation and Properties of Calcium Phosphate Cement Containing ZnO WhiskerFabrication Idea Two-Dimensional Photonic Crystals by Growing Freshwater Pearls Induced by Rare Earth CeriumBiomimetic Synthesis of Tooth-Like Hydroxyapatite under Organic Polymer MonolayerEffect of Process Conditions on Microstructure and Properties of Bioactive GlassToughness Analysis of Cannon Bone Based on Microstructural Model Human Platelet Extracts Stimulate the Terminative Differentiation of Growth-Plate Chondrocytes in RabbitQuantification of BSA in Tissue Engineered Medical Products by ELISA ? Problems and Solutions Surface Characteristics and Hemocompatibility of Modified NiTi Alloy Intravascular Stents Study on Biomineralization of Poly (Vinyl Alcohol) Film via a Biomimetic Process Preparation and Performance of Polypyrrole Film with Micro-Antennal Morphology for Medical BiologyThe Effects of Different Hydroxyapatite/TiO2 Composite Coatings on Protein Expression of OsteoblastPreparation, Microstructure and Properties of Biodegradable Aliphatic Polyesters by Using Nontoxic Magnesium CatalystsNeovascularization of Porous Silk Fibroin Films(PSFFs) as Dermis Substitutes Implanted in RatsHigh-Cycle Fatigue Mechanisms of a NiTi Shape Memory Alloy under Different Mean StrainsInfluence of the Flux Ratio N2/Ar on the Formation of Mo-N Modification Layers on Ti6Al4V by Plasma Reactive SputteringStudy on the Preparation and Micro Structure of the Mg Containing Porous HA with Ultra-Fine GrainHydroxyapatite Deposition by Alternate Soaking Technique on Poly (Vinyl Alcohol)-Coated Poly (e-Caprolactone) (PCL) SubstrateInvestigation of TiO2 Nanotube Electrodes: Fabrication, Annealing and Electrochemical PropertiesCorrosion Behaviours of Mo Modified Ti6Al4V Alloy in Hank?s SolutionPreparation of Porous Titanium by a Novel Foaming Process and MG63 Cell Behavior In VitroEffect of Microstructure and Texture on Corrosion Resistance of Magnesium AlloyElemental Release from Ni-Cr Dental Alloy in Artificial Saliva and Saline SolutionPhase Transformation of Biomedical Metastable ? Titanium Alloy during AgingCorrosion Behavior of Magnesium Alloy AX53 in Simulated Body FluidsBiocompatibility of Chitosan/Heparin Multilayer Coating on NiTi AlloyNegative Synergism between Corrosion and Wear of Nickel-Free Austenitic Stainless Steel in Artificial Body SolutionElectrospinning of Sodium Alginate with Poly(ethylene oxide), Gelatin and Nanometer Silver ColloidFabrication and Antibacterial Performance of Bio-Graded Nano-Composite Materials by Using Inkjet Printing Method Stimuli-Responsive Materials Applied as Carriers of Immobilized EnzymesEffect of the Surface Energy on the Biomineralization Behavior and Cell Compatibility of Carbonated HydroxyapatiteRing Opening Polymerization of e-Caprolactone Catalyzed with Magnesium LactateTi-Glass Biocomposite Coating Materials and their Crystallization Dynamics Study on the Hemolysis Rate and Cytotoxicity Test of Porous Ultramicron HA Containing MgProtein Adsorption Behaviors on PLLA Surface Studied by Quartz Crystal Microbalance with Dissipation Monitoring (QCM-D)Gradient Rare-Earths Bioceramic Composite Coating Fabricated by Wide-Band Laser Cladding and its Bioactivity Improved HA Coating on Titanium Substrate Using Induction Heating and Hydrothermal Treatment Methods Preparation and Characteristics of Gradient Silk Fibroin/Hydroxyapatite Porous CompositesStudy on Preparation and Properties of Nitric Oxide Releasing PolyurethaneEffects of Exercise on Antitumor Efficacy of DHAQ-Loaded PLA-PLL-RGD Nanoparticles in Hepatocellular CarcinomaFlexibility Modification of Konjac Glucomannan Film by DeacetylationDesigning Nano-Hydroxyapatite in the Polyelectrolyte Complex Macroporous Scaffold Based on Chitosan and Hyaluronic AcidExothermal Behavior during the Hydration of the PCCP+DCPA System CementSurface Modification of Chitosan Membranes by Oxygen Plasma TreatmentEffect of Si Content on the Synthesis of Ti3SiC2 Bulk Material by Pressureless SinteringSurface Hydrophilicity Improvement of RGP Contact Lens Material by Oxygen Plasma TreatmentSurface Modification of Fluorosilicone Acrylate RGP Contact Lens by Low-Temperature Ammonia Plasma
In Situ Synthesis and Characterization of ?-Tricalcium Phosphate/Na Doped 58S Bioglass Composite by Sol-Gel TechniqueThe Targeting Magnetic Induction Heating of Nano-Carbon Iron Composite Effects of Alkali and Heat Treatment on Apatite Forming Ability of a Micro-Arc Oxidized Ti6Al4V AlloyAdhesion Strength of Sol-Gel Derived FHA Coating on Laser Gas Nitrided Pure TiConstruction of Tissue Engineered Skin with VEGF-Modified Human Mesenchymal Stem Cells and Acellular Dermal MatrixEffects of bFGF and Collagen on the Construction of Tissue Engineering Cartilage In Vitro in the 3-D Culture SystemEffect of C2H2 Flow Rate on the Deposition of Zr-ZrC-ZrC/DLC Gradient Nano-Composite Film on Biomedical NiTi AlloyStudy on Polylactide/Poly(ether block amide) Composite Biomaterials and Shape-Memory EffectThe Segregation of Chemical Composition in NiTi Shape Memory Alloy Melted by VIM in Lime CrucibleStudy of Electrospun PLLACL Nanofibrous Mats for Drug Delivery SystemThe Effects of Surfactants on the Granularity of the HA Powder Synthesized by MechanochemistryDevelopment and Properties of a New Correction Instrument of Pectus ExcavatumCrosslinked Electrospun UPM/PHBV/PVP Fibers for Sustained Drug Release Osteogenesis of Porous Bioceramics Scaffolds Consisted of Hydroxyapatite Spherules after Implanted in Different Non-Osseous SitesA Ni/Surface-Modified Diamond Composite Electroplating Coating on Superelastic NiTi Alloy as Potential Dental Bur DesignConstruction of Two-Gene Modified Artificial Bone by Using Recombinant AdenovirusPreparation of Tetracalcium Phosphate and the Effect on the Properties of Calcium Phosphate CementEffect of High Temperature on Morphology and Structure of Nano-Hydroxyapatite/Collagen CompositeEffect of Hydroxyapatite Nanoparticles of Different Concentrations on Rat OsteoblastEffect of EDTA on Electrodeposition of Hydroxyapatite CoatingsMicrostructure and Toughness Mechanism of Shank BoneCharacterization of an Insoluble Collagen Sponge and the Potential for Tissue Engineering ScaffoldMicrostructure and Shape Memory Properties of Biomedical Ti-(40-65) Ta (wt. %) AlloysInfluence of pH Value Stability on the Biomineralization of BioglassStudy of Bio-Mineralization of BCP with Compensation of Calcium and Phosphate Ions Evaluation of Precision Machining Characteristics for MAP of Magnesium AlloyProduction of Magnesium Alloy Billets by Semisolid Continuous CastingPhosphate and Stannate Chemical Conversion Coatings Formed on AZ91D Alloys