Advanced Synthesis and Processing Technology for Materials

Investigation of Curing Process on Melt Spun Polymethylsilsesquioxane Fiber as Precursor for Silicon Oxycarbide FibersSynthesis of SiC Based Fibers with Continuous Pore Structure by Melt- Spinning and Controlled Curing MethodEffect of Nd2O3 and Sm2O3 on the Microstructure and Electrical Properties of WO3 Capacitor-Varistor CeramicsThe Effect of Particle Morphology and Particle Size Distribution on the Property of Slip Casting SiCPreparation and Thermoelectric Properties of Bi-Doped Mg2Si NanocompositesThe Effect of Water-Soluble Plasticizer on Barren Raw Material Hard Plastic Extruding CourseStoichiometric Controlling of Spark Plasma Sintered Boron-Carbon CeramicsOptimal Design for Ceramic Radomes with A-Sandwich StructureEffect of Bi Doping on the Thermoelectric Properties of Mg2Si0.5Sn0.5 CompoundEffect of CaO on Sintering and Crystallization of CaO-Al2O3-SiO2 System Phosphorus Slag Glass-CeramicReinforcement of B4C Ceramics with Multi-Walled Carbon NanotubesDamping Properties and Mechanism of 0-3 PMN/CB/EP CompositesField-Assisted Isothermal Oriented Crystallization of SrO-TiO2-SiO2 Polar Glass-CeramicsStructure and Property of Ti-Al-C/TiB2 Composite CeramicsSynthesis, Characterization and Catalytic Properties of La4BaCu5-xNixO13+d (x=0, 1, 2, 3, 4, 5)Oxidation of ZrB2/ZrO2 and ZrB2/ZrO2/SiC CeramicsMolten Salt Synthesis and Photoluminescence of YVO4:Eu Microcrystalline PhosphorsSynthesis, Characterization and Electromagnetic Wave Absorption Properties of Z-Type Hexaferrites Prepared by Molten Salt MethodCarbothermal Reduction and Nitridation Synthesis of ?-AlON Powder under High Heating RateSynthesis of Ultra-Fine ZrB2 Powder by Borothermal Reaction under High Heating RateMicrostructure and Properties of Mulite-FeCr Multifunctional CompositeEffect of Sintering Temperature on the Properties of Porous Silicon Nitride CeramicsEffects of Coated Nano-BN Particles on Microstructure and Properties of BN-AlN Composite Erosion Resistance of Al2TiO5/Al2O3 Composites to Molten AluminumFabrication of Indium Tin Oxide Targets by Spark Plasma Sintering and Hot-Pressing SinteringSuperfast Sintering of Nanocrystalline Y2O3 CeramicsLow-Temperature Sintering and Microwave Dielectric Properties of the Zn2SiO4 CeramicsThermal Shock-Resistance Performance of Al2TiO5/Al2O3 Composites Effect of LaCl3 on the Properties of LAS CeramicsPreparation of Fine Mullite Powder in a SHS Chemical Furnace SystemInvestigation of Bipolar Resistance Switching Properties in SrTiO3 Thin Films with Symmetric Electrodes StructureThe Effect of Oxygen Annealing on the Resistance Switching Properties of the La0.7Ca0.3MnO3 FilmsFabrication and Resistance-Switching Behaviors of NiO Thin Films by Thermal Oxidation of Evaporated Ni FilmsSynthesis of Metastable Tungsten Carbide Nanoparticles by Mechanochemical Alloying ProcessThe Rheological Characterization of the Writing Performance of Carbon Black Gel InkEffect of Surfactant on the Properties of Gel InkNickel Induced Lateral Crystallization of Amorphous Silicon Film by Electroless PlantingStudy on the Oxidation Resistance of 316 Stainless Steel Nano-Powder Prepared by Ball-Milling MethodControlled Growth of SnO2 Micro/Nanocrystals with Different Morphologies via a Solution MethodSynthesis and Characterization of Silver Nanowires by SolvothermalThermal Decomposition and Flame Retardance Behavior of Nanometer Magnesium Oxychloride Crystal Salt Involved in SMCStructure and Up-Conversion Luminescence Properties of Er3+-Yb3+Co-Doped TiO2 Nanocrystals Prepared by Sol-Gel MethodControlled Synthesize of BaTiO3 Nanoparticles and BaCO3 Nanowires through the Reverse Micelle SystemEffect of Processing Parameters on the Microstructure of Silicon Nitride Coatings by Chemical Vapor DepositionGraphitic N-Free/N-Doped Nanostructured Carbon Molecular Sieves via CVD Method and their Hydrogen StorageLaser Energy Dependent Structure of Pulsed Laser Deposited Barium Dititanate FilmsSynthesis and Performance of Nanocrystalline 5083 Aluminum Alloy Powders by CryomillingPreparation of the Boron Nitride Fibers by Chemical Reaction(TiB2)pNi/Ni3Al/Metals Graded Materials Prepared by the Field-Activated and Pressure-Assisted Combustion ProcessImpact of Carbon Nanotube Aspect Ratio and Dispersion on Epoxy Nanocomposite PerformancePreparation and Characterization of Pt/YSZ Composite ElectrodeLaser Cladding of Zr52.5Cu17.9Ni14.6Al10Ti5/TiC Composite Coating on AZ91D Magnesium Alloy for Improvement of Wear ResistanceA New Process for Highly Effective Utilization of Industrial Solid Wastes ? Sialite TechnologyStudy on Low-Temperature Sintering of Microwave Dielectric Ceramics by Sol-Coating MethodSynthesis of Carboxylic Acids Intercalated Mg-Al Layered Double Hydroxides by a Modified Reconstruction MethodEffect of Hydrogen Peroxide on TiB2-Based MaterialsPreparation and Characterization of the Coated ZrB2 @ ZrO2 CeramicPreparation and Characterization of Polyaniline/PMN Composite by In Situ Polymerization MethodDielectric Properties of PMN/CB/CIIR CompositesThe Effect of Particle Size on the Electromechanical Properties of PZT/PVDFPreparation of TC4-LY12 Joint by Vacuum Diffusion WeldingFabrication of Mg-W System FGM with Density Gradient by Hot-Press SinteringQuasi-Isentropic Compression Characters of Flier-Plates with Graded ImpedanceInfluence of Buffer Layers on the Structure and Optical Properties of Na-Doped ZnO Thin Films Prepared by Sol?Gel MethodPreparation of ZrC Powder by Self-Propagating High-Temperature SynthesisPreparation of Mg-Cu Composite by Tape Casting and Hot-PressingNumerical Simulation of Dominating Control Factors of Thermal Protection FGM?s Effective Thermal ConductivitySpark Plasma Sintering Process of Fe-6.5%Si Alloy from Fe and FeSi PowdersStudy on Electrical Properties of Carbon Fiber Reinforced Cement Paste with CCCWThe Effect of Surface Hydroxyl Groups on the Properties of SR/Al2O3 CompositesSynthesis of Co2O4 Microspheres by Hydrothermal-Precipitation for Electrochemical SupercapacitorsPreparation and Characterization of Novel Functional Gradient Syntactic FoamEffect of Sintering Schedule on the Microstructure of Carbon Nanotubes Reinforced Alumina Fabricated by SPS Method