Nano Engineering and Materials Technologies IV

Rapid Dissolution of Secondary Phase in Cold-Rolling Al-Cu-Mg Alloy by Electropulsing TreatmentSelf-Healing Microbial Concrete - A ReviewControl and Mechanism Analysis of Serrated Chip Formation in High Speed Machining of Aluminum Alloy 7050-T7451Utilization of Local Waste Materials in High-Performance and Self-Compacting ConcreteStudy on the Influence of Anisotropy on Cutting Performance of Aviation Aluminium Alloy 7050-T7451Static Softening Behavior of Low Carbon High Niobium Microalloyed SteelExperimental Study on Friction Characteristics of Micro-Arc Oxidation Modified Layer on Titanium Alloy SurfaceMechanical Behavior of Mode I Fractured Concrete Repaired by Polymethyl Methacrylate (PMMA)Modification and Scale-Up Process of Citrogypsum to a-Calcium Sulfate Hemihydrate over Sodium Chloride SolutionResearch on Additive Manufacturing Technology in the Field of Mold RepairReview and Prospect of the Influence of Laser Cladding Process Parameters on the Properties of Die Cladding LayerStudy on the Friction Characteristics of Plasma Spray Modified Layer on Titanium Alloy in Artificial Sea Water EnvironmentPorous Bioceramic Made from Cow Bone Powder Mixed Calcium Phosphate Glass: Clinical TrialPreparation of Crude Turmeric Extract Loaded Poly(Acrylamide-co-Acrylic Acid) Microspheres for Drug Release SystemPreparation and Characterization of a New Absorbent Pad from Rice StarchClinical Trial of a Novel Starch-Based Adhesive Bandages for Medical DressingInfluence of Sieving Polymer Concentration and Applied Voltage on Separation Accuracy of the Capillary Gel Electrophoresis for Small DNA FragmentsThe Thermal Properties of Polyurethane/Neoprene Blends on Prosthetic FootEncapsulation of Turmeric Crude Extracted in Chitosan Hydrogel Beads for Antimicrobial in Animal Health Care ApplicationsMixed Langmuir Monolayers of C18 Fatty Acids: Effect of Degree of SaturationCalculation of Activation Energy of Commercial Grade H2O2 from DSC for Using Evaluation Thermal HazardInfluence of Different Preparation Methods of Silver-Modified Carbon Nitride on the Photocatalytic Activity towards Indigo Carmine DyeTo the Question of Efficiency of Different Methods of Dispersion of Nanosecuring SuspensionsSynthesis of Zeolite X from Bentonite via Hydrothermal MethodSynthesis of Nanoporous Material from Lignin via Carbonization Assisted Acid ActivationHorse Manure Derived Nitrogen-Doped Porous Carbon via Hydrothermal Carbonization for Promising ApplicationsThe Production of Biodiesel from Waste Cooking Oil (Simultaneous Esterification and Transesterification Using Fe/Zeolite Catalysts from Waste Geothermal)Effect of Poly(Acrylic Acid) Based Polymer Flocculants on Sedimentation of Surface WaterPhotocatalytic Degradation of Methylene Blue Using Zinc Oxide/Styrene Butadiene Rubber PhotocatalystPilot Scale Continuous Adsorption of Soluble Oil Wastewater by Modified Sugarcane Bagasse with Al2(SO4)3 as AdsorbentThe Effect of Different Extracting Conditions on the Antibacterial Activity of Moringa oleifera Lam. Leaves Extract for the Development of Antibacterial Meat TrayA Simple Synthesis of Silver Nanoparticles on Cellulose Paper for Antimicrobial ApplicationsCharacterizing Interfacial Thermal Conductivity in Graphene NanocompositesEffect of Soybean Oil in Eggshell Powder Filled Polylactic Acid Composites on its Mechanical, Thermal and Rheological PropertiesImproved Thermoelectric Behavior of Super-Growth Carbon Nanotube Using Tetrathiafulvalene-Tetracyanoquinodimethane NanoparticlesHydrophilic/Hydrophobic Property Changes on Polyacrylonitrile/Cellulose Acetate Nanofiber MembraneSwelling of PVA/Chitosan/TiO2 Nanofibers Membrane in Different PHEco-Friendly Preparation of Nanofibrillated Cellulose from Water Hyacinth Using NaOH/Urea PretreatmentObservation of Coating-Substrate Adhesion of Nanocomposite Hard Coating with Respect to the Deposition Parameters and Surface Finishing of Cemented Carbide SubstrateInvestigation of Mechanical Properties of MWCNTs Doped Epoxy Nanocomposites in Tensile, Fracture and Impact TestsDeformation and Fracture Mechanics of Superior NanocompositesStructure and Properties of Sputtered Ti-O-N Nanocomposite FilmsFabrication of Poly(Butylene Succinate) Composite Films with Silver Doped ZSM-5: Effect of Silver ZSM-5 on Antibacterial Activity and Biodegradable BehaviorThe Effect of Thermal Aging on Mechanical Properties and Morphological Properties of Thermoplastic Vulcanizates Based on Natural Rubber and PolystyreneCombining Cellulose and ZnO for Extend the Shelf Life of FruitModeling of Polymeric Liquid Material Properties Effect on Pressure Transients in the Elastic PipeA Preliminary Study on the Effect of Pandanus amaryllifolius Extract as Green Stabilizer to the Growth of Nanostructured ZnOPatterned ZnO Nanowires between Interdigitated Electrodes by Integrating Hydrothermal Approach with Photolithography ProcessExperimental Investigation the Effect of Cleaning on the Optical and Mechanical Properties of PV Module GlassesCharacterization of a Chromium (III) Ion Probe and its MOF-Supported MaterialStructural and Optical Properties of Commercial Microparticle Zinc OxideThe Detection of Cu2+ Ions Using Paper-Based Silver Nanoparticles as a Colorimetry IndicatorA Performance Study of CNT/TiO2/ PVA Loaded on the Paper Filter for Benzene Treatment from Cigarette SmokeActive Starch/PVA Composite Films Containing Syzygium oleana for Ammonia Vapor Colorimetric IndicatorsGrowth of less than 20 nm SnO Nanowire Using AAO Template for Gas SensingThe Effect of Doping on the Structure of Zinc Oxide Obtained by Atomic Layer Deposition