Advanced Polymer Science and Engineering

Effect of Surfactants on the Dispersion of Multi-Walled Carbon Nanotubes in Epoxy ResinResearch on Bonding of PMMA Microfluidic Chip with Precisely Controlled Bonding PressurePseudo-Plastic Behavior of a Film Foam Flow with Carbon Dioxide as the Internal Gas PhaseA Mechanical Model for TRIP Sheet Steel FormingMechanical and Interfacial Properties of Hydrolyzed Kevlar Fiber Reinforced Wood Flour/HDPE CompositesModification of Poly(vinylidene Fluoride) by Grafting of Functional Monomer 3-(Trimethoxysilyl)propyl MethacrylatePreparation and Characterization of PES/SPSF Blend Ultrafiltration MembraneInfluence of Transesterification on the Properties of PET/MAPE Blends Prepared by Reactive ExtrusionA Study on the Properties of Polypyrrole Coated Polyester FiberInfluence of Draw Ratio on Crystal Morphology and Structure of ?-Form of Isotactic PolypropylenePhysical Properties of Waste Lignin/HDPE CompositesPreparation and Properties of High Performance Polyimide FoamImpacts of Acid Treatment on the Characteristics of Native Corn Starch GranulesEicosane/Polycarbonate Composite as Form-Stable Phase Change Materials for Latent Heat Thermal Energy StorageStructure and Thermal Properties of Cellulose Diacetate-Graft-Poly(lactic Acid) CopolymerHydrophobic Modification of Natural Cellulose Fiber with MMA via Surface-Initiated ARGET ATRPRemoval of Cesium from Aqueous Solutions Using Crosslinked Amphoteric Starch Prepared by Microwave TreatmentSynthesis of Carbon Nanotubes with Typical Structure from the Pyrolysis FlameStudy on the Parametric Optimal Design of a Different-Speed MixerExperimental Study of Melt Electrospinning in Parallel Electrical FieldInfluence of Hydrogen Dilution on Electrical Properties of Amorphous Silicon Thin Films Deposited on Glass SubstratesStudy on the Surface Treatment of Special Screw for Light Guiding Plate?s Precision Injection MoldingFactors Influencing Diameter of Polypropylene Fiber in Melt ElectrospinningStudy on the Synthesis and Properties of EP/PU CompositeA New Process for Manufacturing Straw Particleboard by Impregnating and Enzyme TreatmentEffect of Spinning Conditions on the Morphology of Polyacrylonitrile Hollow Fiber MembranesSpringback Prediction of the TRIP Sheet Steel StampingSimulation of Non-Isothermal Crystallization under Varying Cooling Rates for Polymer MeltsFinite Element Analysis of Performance for Radial Tires, Part I: Model, Material ConstantsFinite Element Analysis of Performance for Radial Tires, Part II: Simulation ResultsExperimental Research on Mechanical Adaptability Properties of Tri-Axis Differential-Drive In-Pipe RobotAnalysis of Ring-Opening Reaction between Bisphenol A and Epichlorohydrin by the Method of Quantum Chemical CalculatingSwelling Characterization of Double Sensitive Hydroxypropylcellulose / Sodium Alginate HydrogelElectronic Transport Properties of Hydrogenated Amorphous Silicon Thin Films Deposited on Plastic SubstratesExperimental Study on Pseudo-Plastic Behavior for Film Foam Flow in a Vertical TubePreparation and Mechanical Properties of Rubber/Organoclay NanocompositesPrediction of Forming Limit of Sheet Metal Based on St?ren-Rice ModelBiodegradable Poly(lactic Acid)/TDI-Montmorillonite Nanocomposites: Preparation and CharacterizationPreparation of Polyethersulfone Ultrafiltration Tubular Membranes with Superior PropertiesResearch on the Curing Behaviour and Morphology of an Epoxy/OMMT Nanocomposite SystemStudy on the Dense Phase Pneumatic Conveying Property of Carbon BlackInfluence Analysis of Sampling Time for Synthesis of Carbon Nanotubes in the V-Type Pyrolysis FlameDeformation Analysis of Polyurethane Screen Deck in Linear Vibrating ScreenThe Mould Design of the Car?s Oil Strainer Based on Pro/EThe Mold Flow Analysis of the Car that Based on Pro/ESealing-Spinning Technology for Thin-Walled Aluminum Alloy TubesProcess Analysis and Numerical Simulation of UHMW-PE Pipe Gas-Assisted Precision MoldingN-Lamina Model of Extrusion Pressure of Non-Plug Flow Solid Conveying in Feeding Section by Single-Screw Extrusion MoldingStudy on the Preparation and Properties of Thermoplastic Tapioca Starch / Magnesium Hydroxide CompositesA Statistical Method to Determine the Volume Fractions of Inclusions in Polymer CompositesMolecular Interdiffusion of Hauling Theory between Dissimilar Polymers Based on Novel USWPortable Benzo[a]pyrene Immunosensor Based on the Polyanline Nanofiber Modified Screen-Printed ElectrodePreparation and Characterization of Conductive Polyaniline/Zirconia Nanoparticles CompositesPreparation of Antibacterial Cotton Fabric Containing Patchouli Oil Microcapsules by Chemical Crosslinking MethodPreparation and Characterization of Polyacrylonitrile-Metal-O-MMT NanocompositesStudy on the Effect of Thermal Design of Plane Mould on the Mechanical Properties of Epoxy Sheet Molding CompoundsLiquid-State Synthesis and Properties of Fluorescent Conducting Polymers: a, ?i-SiW11GaIII/PolyanilineEnd-Point Control of Holding Phase Based on Cavity Pressure for Injection MoldingPreparation and Characterization of PVDF Hydrophobic MembraneDevelopment of a Two-Dimensional Force Model and Data Analysis for the Tire Uniformity Testing MachineEffects of Rotor Speed on Manufacturing Process of Short Fiber-Rubber Composite MaterialStudy of the Heat Storage Device Characteristic in the Solar Chimney Power Plant System with Vertical CollectorExperimental Research and Performance Testing of Fe-Based Composite PlatingExperimental Study of Screw Speed Effects on Quality of Short Fiber-Rubber Composite MaterialExperimental Study on Thermal Conductivity Property of Rubber Composites Filled with Carbon NanotubesStudy on Foaming Effect of the Biodegradable Buffer MaterialThermal Conductivity of Composite Silicone Rubber Filled with Graphite / Silicone CarbideResearch on Crafts of Ni-P-SiC Electroless Composite Plating on Surface Performances of the MouldScrew Conveyor Design and Processing in Rubber ProductionNonlinear Finite Element Analysis of the Bending of Shape Memory Alloy Hybrid Epoxy BeamsEffect of Transformation on Springback for TRIP Steel StampingDistributive Mixing Performance and Mixing Efficiency of Discs in a Series Disc-Screw ExtruderStudy on Low Profile SMC for the Production of Cylinder Head CoverThe Cooling Time of Gas Assisted Injection MoldingThe Dynamics Analysis of Rolling Movable Teeth ReducerThe Kinetic Parameter Calculations of the Shift Pairs about the Tripod Universal JointControl of Residual Vibration in Micro-Positioning PlatformDesign and Characterization of a Flexible Micro-Displacement ManipulatorStudy on Properties of Polyester Short Fiber-NR CompositesCAE Optimization of Hot Runner Sequential Injection Molding for Car Interior Trim PanelsStudy on Thermal Conductivity of Composites of Rubber/CB with Good Electrical PropertiesInstantaneous Dynamic Analysis of the New Stirring Kneader ShaftOptimal Design for Roller Motion Track of Tire Building MachineExperimental Study on the Blending of EPDM/R-EPDMExperimental Research on Seal Ring in the Pipeline Mixed with r-EPDMThree-Dimensional Temperature Field of Mixer Chamber AnalysisProcess of Supercritical CO2 Extraction and Improved Design of Extraction EquipmentThe Study of Electroless Ni-P Coating on Aluminum Tyre MoldThe Effects of Interbedded Friction on Load Capacity of Rhombic Wire Wound VesselOptimization of Packing Pressure Curve in Injection Molding Based on Numerical SimulationStudy on the Influence of Initial Temperature of Tire on Curing Temperature Field and Cure StateDetermination of Thermo-Physical Properties of Rubber and its Effect on Curing Temperature Field of TireEffect of Helium on Synthesis of Carbon Nanotubes from the V-Type Pyrolysis FlameEffect of Hydrogen on V-Type Pyrolysis Flame Synthesis of Carbon NanotubesResearch of Polymerization Reactor Fault Diagnosis Based on Acoustic Emission5m Drum?s FEA and Optimum Design Based on SolidWorks SimulationStudy on One-Step Injection Moulding Technology of Screw Drill Stator BushingApplication Analysis of Radial Tire Mould Assembly ProcessThe Study of Fuzzy/PID Compound Control Algorithms in Rubber Sulfuration Process Based on Sugeno RulesExperimental Research on the Hot Knife?s Temperature in Radial Tire Building MachineThe Study of the Extruder Screw for the Rubber and Plastics BlendExperimental Investigation of the Thermoplastic Tapioca Starch/Sisal Fiber CompositesFluid-Solid Coupling Analysis on the 2-Dimentional Flow Field of Internal MixerThermal Conductivity of Solid Argon Nano-Films from Molecular Dynamics SimulationsNumerical Analysis on Temperature Field in a LED ModuleResearch of Soccer Robot Target Tracking Algorithm Based on Improved CAMShiftThe Effect of the Rotor?s Shape for the Mixing about the Mixing-Extruding MachineNumerical Model of Melt-Through in a Fully Penetrated GTA Weld PoolStudy on the Applied Research of a Different-Speed MixerFixed Bed Column Studies for the Sorption of 2,4,6-Trinitrotoluene on the Aminated LigninPreparation and Characterization of Spherical Lignin/Polylactide Composite AdsorbentGraft Copolymerization of Soybean Protein Isolated and Methyl Acrylate as a New Thermoplastic MaterialNumerical Simulation of Shrinkage in the Microinjection Molding of Multi-Microparts Produced in one MoldPLA Nanofibers Electrospun from System of Low Toxicity SolventPreparation of Pd Membrane Supported on Al2O3 Nanofiber Nonwoven Used in Hydrogen SeparationSingle Screw Extruder Characteristics on Friction and Heat Generated with the Barrel Carved Spiral GrooveExperimental Study on Surface Damage in Forming of Galvanized Steel SheetsResearch Progress and Application of Multi-Point FormingDevelopment of Carton Black?s Dispersion Evaluation System Based on StatisticsA Preparation Method for Inner Liner of Non-Butyl Rubber CompositesStudy on Mechanism of Strengthened Vortex Diffusion for a Punched AgitatorStudies on the Influencing Factors of Biodegradable Buffer MaterialFEM Analysis of Mixer Rotors of the Waste Rubber ReclaimedComposite Pressure Vessel Stress Analysis and Failure Research