Advances in Composites

Wood-Polymer Composite Prepared by In Situ Synthesis of Copolymer within Wood and its Dimensional StabilityFlexural Behaviors of RC Beams Strengthened with Post-Poured UHTCC LayerThe Study of Several UV Curable Polyurethane AcrylatesThe Relationship between Residual Stress and Resistivity of Au/NiCr/Ta Multi-Layered Metallic Films by Magnetron SputteringCombinations of Various Self-Consolidating Concrete Test Methods and Workability ResponsesEffect of Substituents and Solvents on Phenol-Isocyanate Urethane ReactionParameter Determination of Discrete Element Model of Conditioned Soil by Genetic Neural NetworkImproving the Performance of Intumescent Flame Retarded Polypropylene with Nano-ZrO2The Study of Sputtered Silver-Based Low-Emissivity Coating on GlassFirst-Principles Calculation of Elastic Properties of TiB2 and ZrB2Preparation and Performance Research of Thermosetting Heat-Reflective Coating for Asphalt PavementErosion-Resistant PVD ZrAlCuN Coating for Titanium AlloyMechanical and Shielding Properties of an As-Cast New Pb-B Shielding Composite MaterialsPhysical and Electrochemical Properties of Layered Li[Ni1/3Co1/3Mn1/3]O2 Cathode MaterialsEffects of RE on the Microstructure and Mechanical Properties of Electrodeposited Copper FoilStructure, Electrical and Optical Properties of Ni-Doped Cu3N Films Deposited by Radio Frequency Magnetron SputteringCrack Pattern Evolution and Complexity of Brittle Failure of RockGd2O3 Added Glass-Ceramic Composite for the Improvement of Energy Storage Density through Controlled CrystallizationStudy on the Reaction Mechanism of (a-Al2O3+TiB2+TiC)/Al Composites Fabricated by Al-TiO2-B4C SystemSimilarity of Deuterium Absorption at Room Temperature for Different Ti-Zr-Ni QuasicrystalsSelf-Assembled Stratified Structure in Polyalkylthiophene-6 and Polyvinylcarbazole Blend FilmMathematical Model for Temperature Distributions of Work Roll in Aluminum Strip Cold RollingResearch on the Tribological Properties of SF Polymer Water-Lubricated BearingsMorphological Properties of Poly(Trimethylene Terephthalate)/Maleated Styrene-Butylene-Co-Ethylene-Styrene/Organoclay Ternary NanocompositeEffect of Film Thickness on Structure and Property of Pb(Zr0.53Ti0.47)O3 Thin FilmTransformation Induced Plasticity Behaviors of TRIP Steels with Different Heat Treatment ProcessesStudy on Factors Impact on Performance of Ceramisite Made of Shale and SludgeStudy on Choice of Reference Planes for 3D Machined Surface Roughness of SiCp/Al Composites during High Speed Milling ProcessAnalysis on the Microstructure Characteristics of Steel-Slag Based CeramicsPreparation and Characterization of Poly(Lactic Acid)/Ethylene Glycidyl Methacrylate Copolymer BlendsThermo-Physical Properties of Copper Matrix Composites Reinforced with 3D-SiC NetworkChiral Resolution of Racemic (?)-1,1'Bi (2-Naphthol) by Use of Molecularly Imprinted PolymersStructural Transformation of Aluminum Nanowires during SolidificationDynamic Properties of Lead Rubber Bearings and its Seismic Isolation Applications in High-Speed Railway BridgeStudy on Inorganic Phase Change Materials Encapsulated by Rice StrawsFirst-Principles Calculations of Transition Metal Nitrides TiN and NbNResearch on Blue-Algae Removal from Eutrophication Water by Modified ClayWear Mechanism Analysis and Microstructure of Vanadium Carbide Coating by Thermal Diffusion ProcessDynamic Behavior and Stability of Prestressed Arch-Supported Reticulate Shell StructureResearch on the Shielding Performance of Electromagnetic Shielding ClothesAxial Compression Experimental Research of RPC Filled Steel Tube ColumnsTrisiloxane Surfactants Technology Optimization and Impact of Surface TensionPreliminary Study on Natural Villous Bamboo Fiber Medium Density Fiberboard (MDF)Structure and Mechanical Properties of (Cu, Ti) - Binary Metal Doped Diamond-Like Carbon FilmsStudy on the Morphology and Properties of Nylon11/Montmorillonite NanocompositesDuctility Evaluation of Reinforced UHTCC Structural MembersCompressive Buckling of Composite Plates with a DelaminationSteady Thermal Stresses in a Ceramic/FGM/Metal Composite EFBC Plate under Convective Heat Transfer BoundaryExperiment Study on the Frost Resistance of Steel Fiber Reinforced ConcreteAging Effects on Pavement Performance of Asphalt MortarStudy and Preparation of Ti-Doped ZnO Thin Films by Using Chemical Bath DepositionRoom-Temperature Electrical Conductivity Property of Si3N4/TiN Composite CeramicsA New Regeneration and Restoration Technology of Asphalt PavementEnhancing the Built Environment by Green RoofsEffect of Electric Pulse Modification on Alloy Layer of Hot Galvanizing CoatingsNonlinear Seismic Response Analysis Method for Steel Mega-Frame Structures Based on Improved Finite Segment Element Plastic Zone ModelFrictional Brake Material Reinforced with Sisal Fiber and Glass Fiber HybridPrediction on Autogenous Shrinkage of Self-Consolidating ConcreteLow Temperature Fired Ferrite/Ceramic Composite Materials and their Permeability SpectraMechanical Performance of Straw Fiber Reinforced Desulfurization Gypsum Composite MaterialsPreliminary Research on Pb-Sn-Al Laminated Composite Electrode Materials Applied to Zinc ElectrodepositionGrafting Milk Protein on Polyester Fabric Encased with Hydroxide and Wearability of Polyester Fabric Grafted Milk ProteinStudy of Surface Modification of Recycled Aggregate and Interfacial Zone Microstructure of the ConcreteThe Pervaporation Performance of Polyimide-Block-Polyethylene Glycol Membranes for Gasoline Desulphurization: Effect of PEG GroupsPreparation and Application of Hybrid SBS Bipolar Membrane in Electro-Generation of HPAc and Succinic AcidDamage Theoretical Analysis of 2.5D C/SiC Composites under Tensile and Shear LoadingFouling Resistance of PVDF-Fabric Composite Membrane in Membrane Distillation DesalinationSynthesis and Photovoltaic Properties of Fluorene-Based CopolymersResponse of Concrete Beams Partially Prestressed with External Unbonded Carbon Fiber-Reinforced Polymer TendonsStudy on Low Temperature Sintering Behaviour of CaO-B2O3-SiO2 Glass CeramicsPreparation and Basic Mechanical Properties of Self-Compacting ConcreteSandwiched Wood-Plastic Composites with Flame-Retardant SkinMigration of Cations in Mortar under an Electrical Field Controlled by a Constant Current DensityVibration Research of Gear Box in H5 Mill for Alloy Bar's Rolling ProcessStudy on Application of Modified Polyethylene in Preparation of Wood-Plastic CompositesSynthesis, Characterization and Thermal Analysis of Rod-Shaped Polyaniline-Barium Ferrites NanocompositesHydrothermal Synthesis and Adsorption Proprieties of Titania-Active Carbon CompositesCrack Prevention-Based Selection Method for Thickness of L-Shaped Floorslab without BeamSulfonation Surface Treatment of Plasma Alkali Secondary Lithium Battery SeparatorEffect of Compatibilizing Agent on Mechanical and Thermal Properties of Wood-Plastic CompositesResearch on Swirling Cavitation Degradation and its Application in Wastewater TreatmentThe Moment-Curvature Relation of SRC Column Based on the Fiber Model Method and its Influencial Factors AnalysisHydration Behavior of Metakaolin-Cement Pastes with Different Contents of Reactive Aluminous at Early AgeTreatment Materials for Spalling on Loess SlopeThermal Stability and Dynamic Mechanical Behavior of Nano-SiO2/Phenol Formaldehyde Resin NanocompositesResearch on Pavement Characteristics of Epoxy Resin and Rubber Modified AsphaltLoad Carrying Capacity Analysis of Multi-Spiral Reinforced Concrete ColumnTool Materials Design and the Sintering Optimization Based on Interface Strengthening TheoryFabrication of ACF/CNT Composites by CVD MethodControl Growth of Pyrocarbon by Chemical Vapor InfiltrationAn Experimental Study on Effect Factors of Post-Installed Bar in Concrete Anchorage and Bonding PerformanceThermal Conductive Composite Prepared by Carbon Coated Aluminum Nanoparticles Filled Silicone RubberStudy on Performance of Epoxy Asphalt Concrete Applied in the Deck Pavement of Pingsheng Steel BridgeThermal Properties and Flame Retardancy of Wood Treated with a Series of StannatesEffect of Technical Parameters on Preparing for Vanadium NitrideThe Engineering Properties Comparative Study of Wetlands Soft Soil and Soft Soil of other GenesisThe Growth, Surface Topography and Curie Temperature in Ni Thin Films: Kinetic Lattice Monte Carlo SimulationPreparation and Performance Test of Composite Clinoptilolite Filter MaterialMulti-Objective Optimization of a Wedged-Ring Joint StructureThe Mechanism of Antibacterial Activity of Copper and Cerium-Loaded White Carbon BlackSeismic Behavior Analysis on the Steel Cold-Formed in Modular HouseExperimental Study on Damage Diagnosis of Reinforced Concrete Beam with Acoustic EmissionSynthesis and Characterization of Modified Zn-Antibacterial White Carbon BlackCement-Based Composite with Carbon Nanotubes Reinforcement Tailored for Structural DampingEffect of Annealing Temperatures on the Microstructure of CuInS2 Thin Film by One-Step ElectrodepositionDevelopment of a Low Yield-Strength Ratio and Fire Resistant Steel for High-Rise BuildingTensile Properties of Aluminum Matrix Composites Reinforced with Submicron SiC ParticlesStudy on Resistance to Chloride Ion Penetration of High Performance Concrete for High Speed Railway Bridge PileSmart Green Composite: Effect of Cuttlebone Particle on the Mechanical Properties of NR VulcanizatesStudy on Bonding Properties of Birch with API AdhesiveA Research on Performance of Polystyrene-Aerated Concrete Wall MaterialsPreparation of Exfoliated Polyethylene/Clay Nanocomposites at High Clay ContentHydrophilic Modification of PES Hollow Fiber Membrane via Surface-Initiated Atom Transfer Radical PolymerizationThe Seismic Behavior of Strengthened Joints between Concrete-Filled Steel Tubes and Beams Based on the Numerical Simulation TechnologyStudy on Vibration Alleviating Properties of Different Fiber Reinforced Polymer ConcreteFabrication and Performance of Al-NaI Radioactive Transmutation TargetsEffect of Material Properties on Plastic Shrinkage of Ultra-Fine Sand Pumping ConcreteEvaluation on Performance of Functional PolymerEnchancement of Mechanical Properties in BaTiO3 Ferroelectric Thin FilmsStudy on Frost-Resistant Experiments of Concrete for High Speed Railway Pile Foundation ProtectionThe Research on Influencing Factors of Polymer FloodingInteraction and Enthalpy Recovery Behavior in Polymer Blends of Polysulfone and Carboxylated PolysulfonePreparation and Performance Study of Reflection Heat Preservation Insulation CoatingEffect of Rosin Ester on Water-Resistant Adhesion Oximized RTV-1 Silicone Rubber SealantStatus and Development Trend of Energy-Saving Wall Materials in Cold AreasEffect of Density on Physical and Mechanical Properties of Reconstituted Small-Sized Bamboo Fibrous Sheet CompositeOrganic EL Devices Based on Pyridine-Containing CompoundsA Novel Green Tape with High Solid Content Prepared by Aqueous Tape-CastingStudy on the Properties of Epoxy Thermosets Cured by ImHBPs under Lower TemperatureEffect of Thermal Conduction on Tribological Properties of Polytetrafluoroethylene Based CompositesA Study on 3D Isolation Effect on High-Rise Building Subjected to Near-Field Ground MotionsStudy on CH4 Conversion over Ce-Zr Solid Solution Supported Nano Pt-Ni Bimetal Catalysts: Preparation and Characterization of Ce-Zr Solid SolutionThe Method of Producing Nanomaterials and Melt Blown Nonwovens CompositesEffect of Deformation and Annealing on Microstructure and Properties of Composite Cu-10Fe-3Ag WireErosion Mechanisms of Hydraulic Concretes under High-Speed Abrasive Water Jets at Different Impact AnglesPreparation of Cobalt and Copper Superfine Composite Oxides and Magnetic PropertyEffect of Microstructure on Transport Properties of Nano-Polycrystalline La0.7Sr0.3MnO3-D FilmsLower Branched Liquid Crystalline Polyester POSS Used as Collaborative Modifier for Epoxy ResinPreparation and Properties of Poly Methyl Methacrylate/Lanthanum Hexaboride NanocompositesPhotoluminescence of Eu3+-Doped TiO2 Thin Films Prepared by Sol-Gel MethodNovel Cementious Materials from Industrial Solid Waste for Silt Soil SolidificationResearch on Earthquake Resistant Materials in Mountain Tunnels Crossing FaultApplication Study of Nanoparticle-Enhanced Phase Change Material in Ceiling BoardStudies on the Properties of Epoxy Resins Modified with Novel Liquid Crystalline PolyurethaneToughness Properties of Basalt/Carbon Fiber Hybrid CompositesUltimate Strength Analysis of Ship Hulls of Continuous Basalt Fiber Composite MaterialsInfluence of Different Sintering System on the Formation of Tricalcium AluminateResearch of Properties and Preparation on Zero-VOC Acrylic Elastic EmulsionThe Applications of Concrete Cut-Off Wall in the Reinforcement of the Earth DamExperimental Study on Utilization FGD Byproducts in Building BricksPreparation and Microscopic Analysis of Polyurethane Elastomer Made by Salix psammophilaThe Mechanical Properties of Modified Attapulgite Reinforced Nature Rubber and Styrene-Butadiene Rubber NanocompositesExperimental Study on Mechanicial Properties of TRC PlateThe Effect of IrO2 Doping on the Structure and Magnetic and Magnetotransport Properties of La0.7Ca0.2Sr0.1MnO3 CompositeResearch on Impact Behavior of Reactive Powder ConcreteStudy on the Hydration Micro-Structure and Properties of Complex Cementitious SystemsExperimental Study on Salt Solution Ingress into Concrete under Capillary Siphon EffectPreparation and Mechanical Properties of Nano-SiCp/Mg Composites by Ultrasonic DispersionManufacturing and Mechanical Responses of Ti/APC-2 Nanocomposite Cross-Ply and Quasi-Isotropic Laminates at Elevated TemperatureTribological Behaviors at High Load of MoSX/Au Films in VacuumNew Tin-Functionalized Integrated Rubber for High Performance Green Tire TreadEffect of CCWC on the Self-Healing Action and the Microstructure of Cement-Based MaterialsEffects of CeO2-Rich Mixed Rare Earth on the Mechanical Properties of Al2O3-Mullite Based Foam CeramicsCure Kinetics and Thermal Property of UV-Curable Polyester Nanocomposites Coating Modified with MAP-POSSExperiment Study on Mechanics and Pore Structure of Steel Fibre Reinforced ConcreteStability and Ageing of Plasma Treated Wood/Polyethylene Composites SurfacesRheological Properties of PTT/POE/OMMT CompositesPreparation and Properties of the PTT/ABS/SCF CompositesExperimental Study on Precracked RC Beams Strengthened with Externally Bonded CFRP SheetsInvestigation on Microstructure and Properties of Heavily Cold Rolled Cu-Fe AlloysStructure and Antibacterial Activity of Copper-Carried Zirconium PhosphatesA Novel Nanocomposite Based on Recycled Poly(Ethylene Terephthalate)/ABS Blends and Nano-SiO2The Experimental Studies on the Prepartion of Steel Slag Cement by Gas Quenching Steel Slag
In Situ SiCp/Al-4.5 wt.% Cu Composites Obtained by Direct Reaction SynthesisThermal Stresses in a ZrO2/FGM/Ti-6Al-4V Composite ECBC Plate with Temperature-Dependent Material PropertiesThermal and Mechanical Properties of Boron-Containing Bisphenal-A Formaldehyde Resin CompositesWear Behavior of Fe-Based Coating Fabricated by Plasma Thermal SprayingUtilization of CFB Fly Ash in Eco-Cement: Mechanical Properties and Microstructural AnalysisThermodynamics of Solvent Extraction of Perrhenate with N235 at High ConcentrationA Study of Numerical Simulation and Experiment Investigation on ECMM Processing of PRMMCEffects of PHZ and TiO2 on Image Properties of Silver Film Based on Photothermographic MaterialsThe Structural and Morphology of (La0.7Sr0.3)MnO3 Thin Films Prepared by Pulsed Laser DepositionStudy on Adsorption Mechanism and Dehumidification Property of Composite Desiccant
In Situ Growth of Hydrophobic TiO2 on Calocedrus macrolepis Kurz Wood Surface Using a Cosolvent-Controlled Hydrothermal MethodFabrication of ZnO Nanodot Arrays by Sol-Gel within AAO TemplateRelation between Interfacial Strength and Impact Properties of UHMWPE/LLDPE LaminatesThe Experimentation and Imitation Study on Flow Field of Coherent JetExperimental Study on Dynamic Collision Characteristics of ConcreteStudy on Network Structure C-Cu Composites of Pantograph Slide PlatesThe Electrochemical Behavior and Microstructure of Chromium-Free Passivation Film on Galvanized SteelPreparation, Characterization and Thermal Properties of Polyacrylonitrile/Alpha-Zirconium Phosphate Nanocomposites by Gelation/CrystallizationCyclic Voltammograms of Chlorophenol Oxidation on Boron-Doped Diamond ElectrodeEffects of Thermal Cycling and Freezing after Water Absorption on Tensile Properties of Green CompositesStudy on Curing Behavior of Low Molar Ratio Urea-Formaldehyde Resins with Different Curing AgentsStudy on Properties of Thin Layer Skid-Resistance Material in Tunnel PavingEffect of Elements on Hot Tearing of Directionally Solidified Ni-Based SuperalloysTribological Behavior of La2O3 Particulate Reinforced Copper Matrix CompositesThe Geometric and Electronic Structures of Fen-1Si(n=2-7) ClustersSynthesis of Latent Curing Agent for Epoxy ResinImproved Photoluminescence from Ar+ and N+ Ions Co-Implanted Porous SiliconCompressive Strength and Splitting Tensile Strength of Polyvinyl Alcohol Fiber Reinforced Ultra High Strength Concrete (PFRC)Friction and Wear Behaviour of Al2O3 Particulates Reinforced Al-Mn Alloy Matrix CompositesCrack Resistance of Connections of Cross Shaped Steel Encased Ultra High-Strength Concrete Column to RC Beam under Cycle LoadsWater Permeability of Polyvinyl Alcohol (PVA) Fiber Reinforced Cementitious CompositesExperimental Study on Flexural Strength of Polyvinyl Alcohol (PVA) Fiber Reinforced Cementitious CompositesPreparation of EG-g-MWCNTs and Antistatic Poly(Ethylene Terephthalate) NanocompositesAnalysis of Effection of the Prestressing Force on Shear Lag in Curved Box GirderPrediction of the Strength Development of Fly Ash ConcreteThe Preparation of Coatings with Codepositon Plating on A3 Steel and its Corrosion ResistanceFactor Analysis of Cracks Generated in 22CrMoH Steel GearEffect of Substrate Temperature on the Haze and Properties of SnO2: F Thin Film Coated on Glass (FTO) by Spray Pyrolysis ProcessA Hot-Melt Thermosetting Phenolic Prepreg and its CompositesModeling Corrosion Property of High Chromium Cast Iron under H3PO4 Medium Condition Using Artificial IntelligenceRegeneration of IMAC-Cu Proteinchip by Borate EluentThe Research on the Mechanical Property of CBF/PP Composite BoardEffect of Sintering Temperature on the Properties of Sludge Ceramics and Fly-Ash CeramicsNanocrystalline NiO Thin Film Prepared by Sol-Gel ProcessPreparation and Properties of Al2O3 Ceramic Reinforced Mo-Based Composites by Al(NO3)3 PrecursorTearing Analysis of Coated Fabrics under Mono-Axial Tensile StressesStudy and Application on Quick Repair Materials for Concrete PavementStudy of the Bonding Property between Flanges and Web Plates of Wood I-JoistEffect of the Simplifcation to Structural Systems on Nonliner Performance of Tall BuildingsDesign and Choose Durability Assessment Parameter of Concrete in Salt Soil RegionEffect of Various Nanoparticles on Friction and Wear Properties of Glass Fiber Reinforced Epoxy CompositesMicrostructure and Thermal Properties of Diamond-Al Composite Fabricated by Pressureless Metal InfiltrationPreparation and Properties of Rigid Polyurethane-Imide FoamsPreparation of Rigid Polyurethane-Imide FoamsKinetic Study on the Preparation of Poly(Phenylene Sulfide Ether)Properties of Particleboard Manufactured with Modified Urea-Formaldehyde ResinThe Effect of Thermal Aging on Tensile Strength of Three-Dimension and Five-Direction Braided Carbon Fiber/BMI CompositesThe Influence of Purification of Ethyl Acrylate on the Properties of Cement MatrixDecoloration of Methyl Orange by Mineral-Catalyzed Fenton-Like System of Natural Schorl and H2O2A New Formula of Voids in the Mineral Aggregate (VMA) of Hot Mix Asphalt (HMA) and its ApplicationCarbon Nanotubes Reinforced Aluminum Matrix Composites by High-Energy Ball MillingPreparation and Test of Polyurethane Foam Composites with Alkali Lignin/Renewable PUFEffect of Silane Concentrations on Mode I Interlaminar Fracture of Woven Silk/Epoxy CompositesExperimental Study of Elastic Modulus of Crumb Rubber Plastic ConcretePerformance Evaluation of Large Stone Porous Asphalt-Rubber MixtureThe Investigation of Ultrahigh Pressuer Sintering of Cubic Boron Nitride with the Binding Agent of Si3N4Preparation and Characterization of LPAAM Superabsorbent CompositeStrategic Thinking of Construction Material Based on EcologyEffect of Dry-Wet Circulation and Temperature Change on Properties of Polyurea CoatingsMechanical Property Effect of Na2SO4 on Cement-Reclaimed Asphalt Pavement MixtureEffect of Super Slag Powder on Pore Structure and Compressive Strength of RPCPreparation and Analysis of Kaolinite Intercalated by Potassium AcetateTechnology of Processing Mineral Superfine Powder Used in High Performance Concrete by DHM Grinder and its CharacteristicsExperimental Research on Shape Retention of Tackified Woven FabricsFormation Mechanism of AlZrO and ZrAlON Phases in Al-ZrO2-N2 SystemsKinetics and Mechanism of Mo(VI) Extraction with Trialkyl Amine Using a Constant Interfacial Cell with Laminar FlowDiscovery of Zr-Al-Ca-O Phase in Zr-Al-Ca-O-N Composites and its SynthesisThe Mechanisms of Epoxy Latex Coatings Curing at Ambient Temperature Comparison with Solvent-Type OnesQuantum Chemical Calculation of Propylene Oxide Ring-Opening EsterificationMesoporous Carbon with CNT Skeleton and their Electrochemical PropertiesThe Effect of the pH Value of Wood on the Curing Reaction of Low Toxic Urea-Formaldehyde ResinCharacterization and Photocatalytic Properties of Porous BiVO4-SiO2 CompositesSynthesis and Characterization of Gomuti-Graft-Polyacrylamide FlocculantsHigh-Performance Rust Converter with a Formula Based on Polyphosphoric Acid and Tannic AcidFlexural Vibration in a Ternary Locally Resonant Phononic Crystal Thin Plate with DefectsEffect of RE on the Mechanical Properties of 7075 Al AlloyFirst Principles Calculations of Optical Properties of Cu3N and Cu4NPreparation and Properties of Silicon-Corundum-Silicon Nitride CompositesDevelopment of IPMC Actuator for Flapping Motion of DragonflyEffects of Vacuum Annealing on Microstructure and Magnetostriction of TbDy-Fe GMFsExperimental Study on Improving Abrasion Resistance of Sizing Crusher ToothPreparation and Characterization of the Tri-Channel Hollow Fiber Charged Mosaic MembraneShear Reinforcement of Air Plasma for GFRP-Wood CompositeMicrostructure and Properties of Fe/Al2O3 Gradient Coatings on Steel SubstrateToughening of Thermosetting Resins with Thermoplastic Polyimide: Thermal, Morphological, and Mechanical CharacterizationComparison of Hollow-Porous and Solid Carbon Fibers as Microwave AbsorbentsCreep Modeling for Concrete Filled Steel Tubular Members Compressed with a Large EccentricityMonte Carlo Simulation of Magnetic Properties of Multilayer with Amorphous SurfacesSimulation of Fabrication for Single-Phase Al2O3 Ceramic Tool Materials at Different Fabrication TemperatureEffect of Arc Discharge on Friction and Wear Behaviors of Stainless Steel/Copper-Impregnated Metalized Carbon Couple under Electric CurrentExperimental Study on Flexural Fatigue Property of Ultra-High Toughness Cementitious CompositesExperimental Research on Residual Strength of Recycled Aggregate Concrete under Compressive Fatigue LoadingSputter-Deposited Nano-Metal Films in a Short Period for Electromagnetic Shielding TextilesPreparation and Electrochemical Performance of SnO2/Graphite/Carbon Nanotube Composite Anode for Lithium-Ion BatteriesInfluence of Substrate Temperature on Silicon Nitride Films Deposited by R.F. Magnetron SputteringEffect of Beeswax on Functional and Structural Properties of Soy Protein Isolate FilmsExperimental Study on Effects of Temperature on Characteristic Parameters of CFRP-Confined Concrete PrismsHDPE/UHMWPE Blown Films Modified by POE and CaCO3Investigation of Microstructure and Property of Fe3Al/Al2O3 CompositesCure and Dynamic-Mechanical Behaviors of Vinyl Ester Resinfilled with Multi-Walled Carbon NanotubesNanoparticle/Epoxy Nanocomposites: Impact, Flexural and Thermal PropertiesThe Preparation of TiO2 Film Loaded on Fiberglass Mesh and the Experimental Study on Its Photocatalytic PropertiesNondestructive Testing of Mechanical Properties of Pine Laminated Veneer LumberMicrostructure and Properties of Fe-Based Laser Cladding Coatings Reinforced by In Situ Synthesized Multiphase Ceramic ParticlesStudy on the Processing Technology of Bamboo Mat/Bamboo Particle Composite BoardEffects of Different Pretreatments of Wood Fiber on Mechanical Properties of Biodegradable CompositeA Simple Experimental Method to Simulate the Fracture and Faults in EarthquakesAnalysis on Dynamics Characteristics of ICPF for Micro-RobotNovel Antibacterial Nanofibers of Chitosan and Polyurethane Prepared by ElectrospinningInvestigation on the Property and Air Void Structure of Foamed Cement-Fly Ash-Steel Slag ConcreteEffect of Zr on Thermal Stability of Cu-Fe In Situ CompositePreparation and Properties of PLLA-co-bis A/VMT NanocompositesEffect of Gd Substitution on the Dielectric Properties and Magnetoelectric Effect of BiFeO3Study on Synthesis of Methyl Methacrylate/Styrene Copolymer by Suspension PolymerizationSynthesis and Thermal Property of Poly(Allylamine Hydrochloride)Coated Hydrophilic Thin Film on Glasses Using Freeze Drying-Assisted Sol-Gel Technique for Self-Cleaning Building MaterialsAnti-Shear Reliability Analysis of Existing Pretension Prestressed Concrete Beam Bridges in the Corrosion Environment with Acid RainResidual Deformation Behavior of Reinforced Rock-Fill MaterialsStudy on Synthesis and Thermal Property of PolyvinylamineSynthesis and Thermal Property of Linear Chloromethylated PolystyreneTheory and Experiment of Isotropic Electromagnetic Beam Bender Made of Dielectric MaterialsResearch on the Strength Properties of the Magnesium Phosphate Cement (MPC) under the Sub-Zero Temperature EnvironmentStudy on the Performance of Buckling-Restrained Brace with Low Yield Strength SteelFabrication and Mechanical Characterization of nmSiO2/EP Composites by Shock Wave MethodFactors Effect on Grain Refining of Nanocrystalline Copper Fabricated by Explosive Loading and its Dynamic Mechanical PropertySynthesis and Polymerization Kinetics of Copolymer Styrene-Vinyltrimethoxysilane by Emulsifier-Free Emulsion PolymerizationProcessing Parameter Optimization of Flax Fiber Reinforced Polypropylene CompositeStudy on Electrodeposition of Ni-Graphite Composite Coatings in Sulfamate BathSynthesis and Characterization of Poly(Styrene/n-Butyl Acrylate/Vinyltrimethoxysilane) by Emulsifier-Free Emulsion PolymerizationEffect of Ni2+ on Chromium Electrodeposition in Cr(III) Plating BathThe Super-Capacitor Properties of Aligned Carbon Nanotubes Array Prepared by Radio Frequency Plasma-Enhanced Hot Filament Chemical Vapor DepositionImmobilization of MSWI Fly Ash with GeopolymersEnergy Properties of Building Structures Subjected to Strong EarthquakeInterface Study of Short Mullite Fiber Reinforced Al-Cu-Si Alloy CompositesDamage Detection of Steel Domes Subjected to Earthquakes by Using Wavelet TransformCombustion Synthesis of TiC-Fe Coating on Surface of a Plane IronProperties of Lightweight Concrete Masonry Units Made from Lightweight AggregatesInfluence of the Magnetic Interaction among Particles on Distributions of Magnetic Fluids Using Computer SimulationsPreparing and Characterization of the Geopolymer Based on Desulfurization Ash and Fly AshReaction Behavior between Li and NiO Thin Film by EISPhotocatalytic Activities of Visible-Light-Driven TiO2 Films Codoped with Aluminum and NitrogenDesign Method for Braiding Process and Structure Parameters of Three Dimensional Two-Step Tubular Braided PreformDeposition of ZnO:Al Thin Films by Ultrasonic Spray PyrolysisStudy on Material Selection and Manufacturing Process of Wind Turbine BladesTunable Multimode Filtering of Solid Acoustic Waves in a Three-Component Phononic Crystal Slab
In Situ Fabrication and Properties of Mg2Si/AZ91D Magnesium Matrix CompositesApplications of Biorthogonal Non-Tensor Trivariate Wavelet Traits in Construction Engineering ManagementResearch on Structure Stress Analysis on Composite by Lock-In ThermographyStudy on Modification of the Magnesium Phosphate Cement-Based Material by Fly AshElectrochemical Copolymerization of Triphenylene and 3, 4-Ethylenedioxythiophene and Characterization of the CopolymerSurface Intergrity of Inconel 718 under MQL ConditionEffect of Binary Admixture of Fly Ash and Slag on the Carbonation of Concrete for Hydraulic StructureOpen-Air Storage Time Impact on Performance of PSP Used as Concrete AdmixtureModification of Grooved Paulownia Wood SandwichPreparation and Mechanical Properties of Polyurethane Elastomer with Two Soft Segments of HTPB/PTMGApplication of the Calculator Technique in the Ability about the MMCs of the Anti-VibrationDegradation of Orange IV Dye Solution Catalyzed by PVDF/ Fe3+/Cu2+ Membrane in the Presence of H2O2
In Situ Preparation of Magnetic P(AOS-St-BA)-Coated CoFe2O4 Composite Microspheres in Soapless EmulsionDegradation of Orange IV Dye Solution Catalyzed by PVDF/Fe3+-TiO2 Catalytic Membrane in the Presence of H2O2Application of S2O82-/FexOy Solid Super Acid as a Heterogeneous Fenton-Like Catalyst for the Degradation of Orange IV in WaterAbrasion-Resistance at High Temperature of HVOF-Sprayed WC-12Co Coating on H13Solid Super Acid of S2O82-/FexOy-CuOx Catalytic H2O2 to Remove Organic Pollutants in Water
P. aeruginosa Inactivation with Silver and Nickel Doped TiO2 Film Coat on Glass Fiber RivingThe Thin Sheet Metal Rubber Pad Stamping for PEM Fuel CellHydration Mechanism and Performances of Tri?Cementitous Materials System Compounded with Clinker Limestone Powder and Fly AshEffect of Annealing Conditions on Microstructure Evolution of NiMnFeGa Shape Memory Thin FilmExperimental Investigations of Shear Lag Effect in Orthotropic Composite Box BeamMechanical Property of Phosphoaluminate CementSynthesis and Properties of Fluorinated Polyimide Films Based on 1,2,3,4-Cyclobutanetetracarboxylic DianhydridePreparation of Cation Exchange Fiber by Preradiation-Induced Grafting of Acrylic Acid without Removal of the InhibitorMicrostructure and Mechanical Properties of Sn-Bi Alloy Treated in the Semi-Solid State by Mechanical Stirring ProcessResearch on Sodium Citrate for Pulse Electrodeposition ZnSe Thin FilmsInfluence of Tunnel Excavation on Adjacent Underground PipelineInfluence of Rare Earth Oxides on Crystallization Behavior and Sintering Performance of Fused Quartz Ceramic MaterialsEffect of Nano-Oxides on Sintering and Crystallization of Fused Quartz Ceramic MaterialsResearch on the Dissolving Character of Active Si/Al in Fly Ash Activated by AlkaliEffect of Annealing Temperature on Properties of ZnO Thin FilmsEffect of Bamboo Fiber Modification on Tribological Performance of Brake CompositesStudy on Friction Properties of Cu-Fe-Based Powder Metallurgy Materials under Dry and Wet Friction ConditionsStudy on the Mechanical Properties and Handle of PTT/Wool Blended FabricsAnalysis of the Mineral Components and Strengths of the Cementuous Materials Produced with Iron TailingsFinite Element Simulation of Tensile Behaviors in the Elastic Region for PP/Nano-TiO2 Composites