Advanced Engineering Materials III

Preparation and Properties of PS/PP/Nano-TiO2 CompositesMechanical Properties of Thermoplastic Composites via In Situ Polymerization from Cyclic OligomersA Multi-Scale Non-Deterministic Approach to Composite Curing Process SimulationStudy on Preparation and Properties of High Permeability Polyurethane Composites with Low SwellingNumerical Simulation for the Thermo-Mechanical Coupling of Tubular Braided Carbon/Carbon CompositesInternal Stress Calculations of Continuous Fiber Reinforced Composites under Transverse LoadsThe Thermo-Mechanical Coupling Analysis of SiCp/A356 Composites Brake Disc of a Passenger CarEffects of MAPE Treatments on Thermal Properties of Silvergrass Reinforced High Density Polyethylene CompositesEffects of PMDI Modified on Physico-Mechanical Properties of Silvergrass Reinforced High Density Polyethylene CompositesProperties Characteristics of Silicone InhibitorsThe Bentonite Copolymer Composite for Removing Lead IonsThe Research Status, Superiorities and Prospect of Composite Insulation Materials in ChinaConductive Polypyrrole/Polyurethane Composite Fibers for Chloroform Gas DetectionResearch on CFRP Periscope Outer TubeThickness Swelling and Water Absorption Character of Laminate FloorPreparation and Properties of C/SiC Composites via Liquid Silicon Infiltration ProcessJudgment Method of Accelerated Testing Effects on Compound Friction MaterialSintering Properties of Fused Silica/Nano-Zirconia Composite CeramicFlame Retardancy and Mechanical Properties of Brominated Flame Retardant for Long Glass Fiber Reinforced Polypropylene CompositesInterface Reaction of CNTs/Al Composites Fabricated by High Energy Ball MillingThe Propagation of In-Plane Waves in Multilayered Elastic/Piezoelectric Composite Structures with Imperfect InterfaceHot Compression Performance of TiC10/Cu-Al2O3 Composite Prepared by Vacuum Hot-Pressed SinteringStudy on Pore Structure of Multi-Layered Spunbonded NonwovensMorphology, Dynamic Mechanical and Mechanical Properties of Long Glass Fiber Reinforced Polypropylene and Polyvinyl Chloride CompositesPreparation of 3D Honeycomb Basalt Fibers Woven CompositesSiCp/7050 Aluminum Matrix Composite Made by High-Energy Ultrasonic and Two Steps Casting ProcessingCorrelation between Curing Temperature and the Properties of Conductive CompositesEffect of Functionalized Multi-Walled Carbon Nanotubes on the Interfacial Properties of Ramie Fiber/Polylactic Acid (PLA) CompositesEffects of Functionalization MWCNTs on the Mechanical and Electrical Properties of nylon-6 CompositesStudy on Properties of Carbon Nanotubes/Epoxy Resin Composite Prepared by In Situ PolymerizationPBA/P (MMA-MAH) Core-Shell Particles Toughening Reinforced PA6Light-Weight and High Thermal Insulating EPDM Composites Modified with Pretreated Hollow Phenolic Micro-SpheresResearches on Flame Retardation and Hygrothermal Aging Properties of PP/PA6/APP/OMMT CompositesPreparation of Laponite-Armored Polystyrene Particles by Pickering Emulsion PolymerizationEffects of Processing on Mechanical Properties of Polypropylene CompositesSynthesis and Characterization of CNT/Fe3O4-ZnS NanocompositesMechanical Properties of Carbon/PEEK Composites According to the Fiber Ply Orientation and Sizing Removal of Carbon Fiber for Artificial Hip JointMoisture Deterioration Mechanism of Fiber Reinforced CompositesMechanical Properties and Fracture Characterization of Al-5%wtMg Composite Reinforced with Carbon NanotubeIsothermal Crystallization of PET/PTT-CNTs CompositesCharacterizations of Liquid Polycabosilane (LPCS) Used as SiC Matrix Precursor for CLVD ProcessPreparation of Polymer Composite Latex via Miniemulsion Polymerization: Fluorinated Acrylate as Co-Stabilizer and Functional ModifierEstimation of the Elastic Modulus and Moisture Absorption of Sisal FibreA Review on Polymer/Kaolinite NanocompositesHydrothermal Synthesis and Electrochemical Performance of WO3 NanoparticlesPreparation and In Vitro Degradation of PLLA Super Fiber MembraneEffect of Thermal Treatment on the Physical Properties of Electrospun PVDF/PMMA Composite MembraneFlash Synthesis of Tetragonal-ZrO2 Nanostructures by Microwave-Induced Combustion ProcessSynthesis and Characterization of Large Area Carbon Nanotubes ArrayFabrication of Porous Alumina Nanofibers with Hollow Structure by Single Capillary ElectrospinningSurfactant CTAB-Assisted Synthesis and Gas-Sensing Characteristics of SnO2 NanomaterialsA Facile Non-Aqueous Approach for the Synthesis of Cu NanowiresControllable Preparation of Multishaped Micro/Nanosized Hydrated Nickel Molybdate via Chelator-Assisted Hydrothermal RouteSynthesis of ZnO Nanorod Arrays on Chaleted Sol-Gel-Derived ZnO Thin Films and its Optical Absorption in Visible-Light RegionPreparation of TiO2/CNT Composites and Effect of CNT's Structure on Morphology of Nano-TiO2Synthesis of Carbon Nanofibers on Iron and Copper Catalysts by Chemical Vapor DepositionStudy on Needle and Needleless Electrospinning for NanofibersSynthesis of Carbon Nanofibers on C-Fiber Textiles by Thermal CVD Using Fe CatalystEffects of Reaction Conditions on Microstructures and Properties of Polyaniline Nanofibers through Interfacial PolymerizationPolyaniline Nanofibers Produced via Rapid Initiated Polymerization in a Binary Oxidant SystemA Review of Nanostructured TiO2 Application in Li-Ion BatteriesSynthesis of Vanadium-Doped TiO2 Hollow Spheres and their Visible Light Photocatalytic ActivityStudy on PS-Molybdophosphoric Composite Fibers via Electrospinning ProcessCharacterization and Photocatalytic Activity of TiO2 Nanoparticles with Precipitation Method SynthesisProgress on Fabrication of Free-Standing and through-Hole TiO2 Nanotube ArraysA Study of Optimum Conditions for Electrospinning Cellulose Acetate Nanofibers in Trifluoroacetic Acid SolventSimulation on the Dielectrophoretic Assembly of Carbon NanotubesStudy on Morphology and Thermo-Mechanical Properties of Carbon Nanotube-Modified PolycarbonateNovel Methods for Preparation and Surface Treatment of Nano-CaCO3Synthesis and Characterization of Superparamagnetic Fe3O4 NanoparticlesTechnical Study on Microwave Method for the Preparation of Flower-Like ZnOCharacterization of Core-Shell Structure Palygorskite Modified by Nano-CaCO3 (PnC) Composite ParticlesFabrication of Micro-Structural ZnO Crystal and the Concentration Fields of the CVD ReactorStudy on Bainitic Microstructure under Low Austempering Temperature and its Wear Resistance of Low-Alloy High-Carbon SteelResearch on Structural Inheritance Characteristic and the Related Normalizing Elimination Process for 300M SteelResearch on the Reverse Loading Hardening Model of the X80 Pipeline SteelPhysical Simulation of Inclusions Removal in 180t RH DegasserPhase Transformation Behaviors of Nb-V-Ti Microalloyed Pipeline Steel X70Study on Process of SPHC Steel SolidificationEffect of Temperature on Tribological Performances of Ion Nitrocarburized Layer of 42MnCr52 SteelEffects of Nb on Martensite Size in B-Bearing SteelStudy on the Preparation of Carbon-Containing Pellets from the Mixed Ore of V-Ti Iron Concentrate and Titanium ConcentrateStudy on Mixing Time in Bottom-Blowing Ladle with Immersed TubeCold Model Experiments and Mechanism on Inclusion Removal by Ultrasonic HornThe Latest Development on the Heat Treatment, Microstructure and Mechanical Properties of Low-Carbon Martensite SteelStudy on Continuous Cooling Static Transformation Regularity of T700Research on Continuous Cooling Dynamic Transformation of T700Evaluation on the High-Temperature Oxidation Behavior of HP Steam Turbine Rotor MaterialsAlloy Elements Added in Fe-6.5wt% Si Silicon Steel and their Effect on Ductility and Magnetic PropertiesControl of Element and Inclusion for X80 Pipeline SteelThe Influence of Hot Rolling Process on the Performance of HG70CMartensite Phase Transform during Nitrogen-Spray Water Jet QuenchingDevelopment of Economic-Type X70 Linepipe Steel Hot StripInfluence of Primary Austenite Dendrite on the Microstructure and Mechanical Properties of Gray Cast IronThermal Analysis of Solidification Process and Mechanical Properties in Heavy Section Ductile Iron CastingDephosphorization by Slag Pour out in the Smelting for High Carbon 70 SteelThe Galvanic Corrosion Behaviors of 13Cr-N80 Steel Couples in NaCl Solution at Different TemperatureDendrite Grow up Relations with Cooling SpeedThe Effect of Precipitate Agent in Co-Precipitation Synthesis Y3Al5O12 and Y3Fe5O12 PowdersPreparation of Mullite-Aluminum Titanate-Cordierite Multiphase CeramicsPreparation of Ultrafine Zirconia Suspension Using Glutin-Urea Gelcasting SystemDielectric Properties of Na2O Doped Cao-B2O3-SiO2 System Glass-CeramicsTwo Morphologies of Tetragonal Phase in the MgO-PSZ CeramicsStudy on Defect Complexes in High-K Sr and Zr Co-Doped BaTiO3 CeramicsEffect of Sintering Temperatures and Ba/Ti Ratio on Dielectric Properties of BaTiO3 CeramicMagnetic Properties and High Thermal Conductivity of Al2O3 Ceramics Prepared by Spark Plasma SinteringInfluence of Nano-Yb2O3, Nano-Nd2O3 and Nano-Dy2O3 on Sintering and Crystallization of Fused Quartz Ceramic MaterialsEffect of Different Sintering Temperature on the Performance of Mullite-Corundum Refractory MaterialsImprovement of Thermal Shock Resistance Performance of High Alumina Ceramic Filter SupportFracture Mechanics Analysis of GI All-Ceramic CrownsChanges of the Glass Structure in the Phase Splitting Process of Na2O-CaO-Al2O3-B2O3-SiO2-TiO2 SystemResearch in Toughening Wear-Resistant of Alumina CeramicVickers Hardness of Multi-Wall Carbon Nanotube Reinforced AluminaEffect of Addition of Al2O3-SiO2 Gel Powder on Strength of Al2O3-MgO Unfired BricksEffect of Addition of Fused Alumina Zirconia on the Properties of Unfired Al2O3-C SlideEffects of Magnesia Fines on Physical Properties of Al2O3-MgO Unfired BricksThe Study of CaO-SiO2-B2O3-Al2O3-La2O3 Glass Ceramics as Sealant for Planar Intermediate Temperature Solid Oxide Fuel CellsResearch and Characterization of CaO-SiO2-B2O3-Al2O3-La2O3 Sealant with Different Alumina for ITSOFCResearch Advancement of Porous Fiber MetalsHot Deformation Behavior of as-Cast AZ61 Magnesium AlloyStructural, Thermodynamics and Dynamics Properties of Fe-Ni Melts with Different EAM ModelsResearch Progress of Mg-Al Based AlloysInfluence of the Temperature on the Mechanical Properties and Fracture Surfaces of 93WNiFe AlloyEffect of T6 Heat Treatment on Dry Sliding Frictional Wear Characteristics of Al-20Si-5Cu AlloyEffect of Hydrogenation on Microstructure and Mechanical Properties of Ti-6Al-4V Titanium AlloyGrain Refinement of Y in As-Cast Mg-Y AlloysInfluence of Aging Time on Mg-8Al-1Zn-3Ca AlloyMicrostructure and Mechanical Properties of Mg-12Gd-2Y-2Sm-0.5Zr AlloyPreparation of CoCrFeNiCuMnSix High Entropy Alloys and their Microstructure and PropertiesEffect of Al on Zn-Al Filler Metal Wettability on Pure Aluminum SurfaceEffects of Hydrogen on Diffusion Bonding of TiAl-Based Intermetallics with Hydrogenated Ti6AI4V Alloy Interlayer Containing 0.5wt% HydrogenStudy on Structure Properties Casted with Mg-Y-Nd-Gd-Zn-Zr Magnesium AlloyThe Effect of Sr Modification on the Microstructure and Properties of Mg2Si Reinforced Near-Eutectic Al-Si AlloyEnhancement of Faceted Growth of Primary Al3Ni Phase in High Magnetic FieldThermal Stress Variation of Titanium Alloy under Laser RadiationRE-Boronizing below Beta Transus Temperature on TC4 Titanium Alloy SurfaceApplication Research of Al-Fe-P Master Alloy on Modifying ZL109 AlloysHigh-Temperature Oxidation Behavior of Cu-20Ni-75Co AlloyEffects of Ball Milling Time on the Microstructure and Mechanical Property of Cu90Al10 AlloyMicrostructure and Property Evolution of Cu90Zr10 Alloy in the Process of Mechanical AlloyingStudy of Microstructure and Mechanical Properties of Extrued Spray Forming Al-8.5Fe-1.3V-1.7Si AlloyStudy on Performance of Beryllium Bronze's Stress RelaxationStudy of the Phases of Mg-Zn-La Magnesium Alloys at 150?CStudy on Oxidation Behavior of Beryllium BronzeInfluence of Stirring Time and Holding Time on Microstructure and Properties of the A356 Alloy Modified by ScMicrostructures of AZ61 Magnesium Alloy Solidified via Ultrasonic Vibration TreatmentEffect of Cooling Rate on Microstructure of Semi-Solid AZ61 Slurry Produced via Ultrasonic Vibration ProcessWear Behavior of Cu-Based Composite under Different Electrical CurrentsOrganization and Performance of the Novel High Aluminum Zinc-Based AlloyEffect of Fe on the Performance of Rare Earth Aluminum ConductorResearch of Resistance to High Temperature and Creep Resistant Magnesium AlloyDamage and Fracture Mechanism of As-Cast Ti40 Titanium Alloy during Hot CompressionThe Study on Fracture Behavior in Hot Compression of As-Cast Ti60 Titanium AlloyFirst-Principles Investigations on Magnetic Properties in Off-Stoichiometric Ni2MnIn Magnetic Shape Memory AlloysStructures and Undercooling Technology of Ag-28.1 wt.% Cu Eutectic AlloyCorrosion Behavior of the Transient Liquid Phase Diffusion Bonding Joint of TiNi Shape Memory Alloy and Stainless Steel in Hanks' SolutionResearch on Isothermal Phase Transformation Kinetics of TC21 AlloyStudy on Alloy Particles and its Deposited Metal Microstructure and PropertiesNanocrystalline Cu90Nb10 Alloy Produced by Mechanical AlloyingMicrostructure and Corrosion Properties of Mg-Zn-Ca-Nd Alloy for Biomedical ApplicationEffects of Solution and Cryogenic Treatments on Microstructures and Mechanical Properties of AZ31 Alloy TubesThe Corrosion Behavior of 07/09Cr2AlMoRE Used for Petro-Chemical EquipmentEffect of Melt Intensive Homogenization on Solidification Microstructure of 7075 Aluminium Alloy by Twin-Screw StirringValence Electron Structures Analysis on Relationship of Cu Physical or Mechanical Properties and VacancySynthesis and Properties of a Novel Polymeric Phosphate Flame RetardantThe Research Method and Performance Analysis of the Curing Process of E51-593 System and TDE85-593 SystemPreparation and Property Studies of Core-Shell Structure Polyacrylate Microspheres for PlastisolMiscibility Study of Chitosan and Methylcellulose BlendsStudy on the Effect of the Temperature Rise of Rubber Compound on Tread Rubber Quality during Mixing ProcessPlastics: The Discovery in the World and Development in ChinaResearch on Mechanical Properties, Compatibility, Flame Retardancy, Hot-Air Ageing Resistance of Hydrogenated Nitrile-Butadiene Rubber/Chloroprene Rubber BlendsToughening Modification of PA6 with Different Core-Shell ParticlesEffect of Types of Antioxidants on Crosslink Density and Tensile Properties of Epoxidized Natural RubberPreparation for PTFE Hollow Fiber Membranes Used in Water Treatment and Optimization for its Extrusion ProcessMagnetorheological Effect of NDI Polyurethane-Based MR ElastomersProperties of Europium (III) Chelating Polymer FilmExperimental Study of the Characterization of Ultra-High Molecular Weight Polyethylene Fiber PlasticPreparation and Characterization of poly(L-lactide) /poly (e-caprolactone) Composite Films for Food Packaging ApplicationThe Crystallization Properties of PET Obtained by Using the Attapulgite-Supported Aluminum Oxide Hydroxide CatalystSynthesis and Characterization of PBA-P(MMA-HPMA) Core-Shell Latex ParticlesCompatibilizing Modification of Polyethersulfone/Polycarbonate BlendSynthesis and Mesomorphic Behavior of Chiral Liquid Crystalline Elastomers Derived from (S)-(-)-2-Methyl-1-ButanolPreparation and Nonlinear Optical Property of Triazole-Based Fluorene Functional PolymerHydrothermal Preparation and Characterization of ZnO with Various Morphologies for Dye-Sensitized Solar CellsSynthesis of Zn0.2Ca0.8TiO3:0.1Pr3+ by Sol-Gel and its Luminescence CharacterizationAnomalous Refractions Based on Photonic Band Modulation of Photonic CrystalsDesign of Diffuse Reflection Composites and Study on Reflectivity PropertiesPreparation and Characterization of Blue-Emitting (SrCaBa)3(PO4)2?SrCl2:Eu2+PhosphorsHierarchical Porous Materials for SupercapacitorsThe Preparation and Characterization of Novel Nonlinear Optical Active DyeThe Design of the Polymer Diffuse Material with Microstructure and the Research of the Reflection Properties of MaterialsSynthesis and Millimeter Wave Attenuation Properties of the FeCl3-Graphite Intercalation CompoundPreparation and Luminescence Properties of ZnO?SiO2?B2O3?Na2O:Sm3+ GlassMagnetic Phase Transition and Magnetic Proporties of LaFe11.6Si1.4Bx CompoundsEffect of Graphene Layer Number on the Performances of Graphene Nanosheets Counter Electrode for Dye-Sensitized Solar CellsTemperature and Time-Resolved Dependence of Photoluminescence in InGaN Quantum DotsEffect of La Contents on La-Doped Bi2Ti2O7 Dielectric Thin FilmsBand-Tailored InAs/GaSb Superlattice in Infrared ApplicationFull-Potential Study of the Magneto-Optical Kerr Effect for AuMnSb and AuMnSnPolycrystalline Silicon Films on SiO2 Substrate Treated by Excimer Laser AnnealingSpace Charge Limited Current and Magnetoresistance in SiLuminescent Properties of Eu2+-Activated SrAl2Si2O8 as an Potential Blue Phosphor for near UV LED ChipsDesign for Amorphous Silicon Solar CellsInfluence of Substrate on Soft Magnetic Properties of Fe-Co-Si/Native Oxide Multilayer FilmsHigh Efficiency Thin Film Silicon Solar CellsEffect of Yttrium Oxide on the Viscosity and Crystallization of Borosilicate Glass at High TemperatureAnisotropic Magnetoresistance Effect: General Expression of AMR Ratio and Intuitive Explanation for Sign of AMR RatioSynthesis and Characterization of CdSe Nanocrystal Quantum Dots by Solution-Liquid-Solid MethodThe Effect of the Horizontal Distance between the Permanent Magnets on the Levitation Force in Hybrid Magnetic Levitation SystemPhotoluminescent Characteristics of ZnS Quantum Dots Synthesized in Non-Aqueous-PhasePolarization Properties of a Nano-Particle Array Grating on GaN-Based LEDPerformance and Design of an SRM with Amorphous StatorThe PTCR Effect Induced by Grain Boundary Segregation in AcceptorEnhanced Luminescence of Terbium Complexes with 2,3-Pyrazinedicarboxylate by Y(III) DopingHigh Density Formation of Iron Nanodots on SiO2 Induced by Remote Hydrogen PlasmaThermodynamic Performance Characteristics of a Regenerative Brayton Refrigeration Cycle Using Gd0.45Tb0.55 and Gd as the Working SubstanceMicrowave Dielectric Properties of Eu4Ti3O12 Ceramics via Sol-Gel MethodSurface Morphology and Magnetic Properties of CoFe2O4 Thin Films Prepared via Sol?Gel MethodEffect of the Conduction Type of Si (111) Substrates on the Performance of GaN MQW LED Epitaxial FilmsEffects of Mg-Doping on Resistance Switching Property of MgxZn1-xO Thin Films Prepared by Sol-Gel MethodEffect of Mn Doping on Structural and Optical Properties of ZnO Thin Films Prepared on Glass Substrates by Sol-Gel MethodStudy on the Crystallization Behavior of Ge2Sb2Te5 and Silicon Doped Ge2Sb2Te5 FilmsPhase Transition of GeSbTe Thin Films Induced by Thermal Treatment and Laser IrradiationInitial Surface Reactions Mechanisms of Atomic Layer Deposition TiO2 on H/Si(100)-2?1 SurfacePreparation and Performance of Silver Coated Copper PowderImproved Efficiency in Organic Light Emitting Device with a Excton Confining StructurePreparation of Fe3O4-Coated Microsilica Composites via Chemical Reduction MethodStudy on Synthesis and Characterization of Styrene-Maleic Anhydride Random Copolymer by XyleneThe Status-Quo and Prospect of the Self-Cleaning GlassPalladium Supported on Functionalized Mesoporous Silica: Synthesis, Structure and Catalytic Properties in Suzuki-Miyaura Coupling ReactionsSynthesis and Characterization of Melamine Halogen Acid Salts and its Application as Flame RetardantPreparation, Characterization and Photocatalytic Properties of Ag-Loaded Bi2WO6Synthesis of Mesoporous Polyaniline-TiO2 Composite Microspheres for Gas Sensing ApplicationSyntheses, Characterization and Crystal Structure of Zn (II) Complex Constructed from Ferrocenedicarboxylic AcidPreparation and Properties Investigation of Gadolinium Arylate/Hydrogenated Nitrile-Butadiene Rubber CompositesEffects of Process Parameters on the Particle Size Distribution of Graphene Oxide Aqueous DispersionSiO/C Composite Materials for Lithium-Ion Secondary BatteriesPreparation and Growth Characteristics of Mesocarbon MicrobeadsNovel Copolymers of N-[(4-bromo-3,5- difluorine) phenyl] acryl- amide with Methyl Methacrylate: Synthesis, Characterization and Thermal PropertiesEffects of In Situ Formation of Magnesium Aluminate Spinel on Performance of Modified Sizing NozzleEffects of Propargyl Alcohol on Electrochemical Behaviors of AZ91 Magnesium Alloy Anode in 3.5% NaCl SolutionStudy of Thermodynamic Properties of Superhard w-BC2NPhysical and Electrochemical Properties of Lithium Iron Phosphate Synthesized by Gel-Solid State Reduction MethodSynthesis and Characterization of a Novel Phase Change Luminescence MaterialsPreparation and Properties of Fluorinated Poly-Acrylate Emulsion with TPG as Co-SolventSynthesis of F-TiO2 Nanosheets and its Photocatalytic Oxidation of Benzene to PhenolSynthesis and Characterization of a Novel Flame Retardant 1,2-Bis (dimelaminium of 1-nitro-3,5-diphospha-4-oxa-3,5-dihydroxy cyclohexane) Ethane and its Application in PPStudies on Magnetorheological Elastomers for IsolatorsStudy of the Acoustical Mechanism of Nonwovens by Rank MethodRelationship between Fractal Dimension and Structure of NonwovensThe Application of Thermal Analysis to Research on Energetic MaterialsResearch on Appropriate Additives of Recycling Ladle Lining Materials for Al2O3-SiC-C Iron Runner CastableThe Research Status of Spongy Composite in the Wound DressingsN-Allyl-N-Methyl Piperidinium Bis(Trifluoromethanesulfonyl) Imide as a Co-Solvent in Li-Ion BatteriesFirst-Principles Calculation of the Electronic Structure of SrTiO3Syntheses and Characterization of Chiral Branched-Arm Liquid Crystals-Basing on Isosorbide as Chiral CoreThickness-Modulated One-Dimensional Periodic Phononic CrystalPhase Change Materials Applied in Thermal DesignHigh Temperature Proton Conductors and its PreparationHigh Temperature Proton Conductors Resarch and ApplicationCatalytic Synthesis of Benzyl Acetate by Anion Exchange Resin Supported Waugh-Type (NH4)6[MnMo9O32] ? 8H2OCatalytic Synthesis of Isoamyl Acetate by Ion Exchange Resin-Supported (NH4)6[MnMo9O32]
?
8H2O with Waugh StructureGreen Preparation of an Environment-Responsive PolymerThe Composition of Biomass Cushion Packaging Material and the Study of its Influence on Product PerformancePlant Treatments of EAF Slag for its Use as Construction MaterialsElution Efficiency of Herbicides Polluted Soil SamplesEffect Parameters of Ozonation of Dicamba in Aqueous SolutionCharacteristics of Cr (VI) Adsorption in Aqueous Solution by Wheat StrawEffect of Different Parameters on Particle Diameters of Magnesium Salt Flame RetardantsSynthesis and Characterization of Novel Degradable Responsive Polyurethane MicrospherePreparation and Photocatalytic Activity of Fe-Ce-N Tri-Doped TiO2 CatalystsKinetics Study on Catalytic Hydrolysis of CCl2F2 over Solid Acid MoO3/ZrO2Comparation of Cu-Co-Mn Mixed Oxides and Hopcalite as Support in Synthesis of Diphenyl Carbonate by Oxidative Carbonylation of PhenolSynthesis of Diphenyl Carbonate by Oxidative Carbonylation of Phenol with Pd-Co/HopcaliteStudy on the Adsorption Characteristic of Steel-Making Slag Haydite for PhosphorusSolvothermal Synthesis of Carboxyl Functionalized Mesoporous Resins in Microfludic Chip for Water TreatmentsAcceleration of the Degradation of Leachate with Introduced Microbes in Bioreactor Sanitary LandfillThermal Treatment of Coal-Gangue Activation and Influential FactorsSynthesis and Crystallization of Poly(butylenes succinate-block-butylene sebacate)Biodegradability of Poly (butylene succinate) under Enzymatic DegradationStudy on Thermal Analysis Kinetics of Carbon SupportSolvent Recovery of Silica Aerogel Monoliths Synthesis and Adsorption of Trivalent Chromium IonsPVP-Assisted Synthesis and Enhanced Photocatalytic Activity of Ag/Ag3PO4 CompositesEnvironment-Friendly Dry Vibration Refractories Used for Continuous Casting TundishFactors Influencing Coking Waste Water by Three-Dimensional ElectrodeFast Removal of Cu (II) from Aqueous Solutions by PET Nanofibrous Membrane Modified with AcryamideEffect of Gelatin on Secondary Structure, Crystallinity and Swelling Behavior of Silk Fibroin - Gelatin Hydrogels and its Application in Controlled Release of NitrogenEnhanced Cu (II) Adsorption from Aqueous Solutions by Sawdust (Quercus mongolica) Pretreated by Ionic Liquid-Water MixtureThe Preparation and Characterization of ABC-Shaped Star Copolymer of MPEG-PCL-PBLGPreparation and Characterization of Mesoporous Carbon Materials Based on Hard Coal-Tar PitchOverview on the Treatment Technology of Wastewater from Copper Mineral Processing (WCMP)Research on the Technology and Mechanism of Inhibiting Stickies of Blanket by Enzyme TreatmentA New Green Process for Synthesising High Quality PLLA MaterialsIsolation and Characterization of a Bacillus flexus Strain Used in Alkaline Wastewater TreatmentAlkali Lignin as a Carbonization Agent on the Thermal Degradation and Flame Retardancy of Intumescent Flame Retardant CoatingApplication of Biochar for Phosphate Adsorption and Recovery from WastewaterDSC Studies on the Dyeing Properties of PLA FiberThe Preparation and Sunlight Activity of Nanocomposite Photocatalysts for Degradation of Methyl Orange SolutionThe Application of Modified Nanometer Titanium Dioxide in Degradation of Methyl Orange SolutionSynthesis and Identification of Heavy Metal Lead Artificial AntigenOrthogonal Optimization of Preparation of Aquasorb with Naked Oats Straw Fiber and Performance ResearchSynthesis and Swelling Behaviors of Wheat Straw Cellulose-g-Poly (Potassium Acrylate)/PDMDAAC Amphoteric Semi-IPNs Superabsorbent ResinThe Preliminary Exploring on the Factors Affecting the Performance of Adsorption and Degradation Formaldehyde in Cotton Fabric Treated with Nano-TiO2 and Activated CarbonRemoval of Methyl Red from Aqueous Solution by Adsorption onto Mg-Al HTLcThe Study of Denitration and Mercury Removal from Flue Gas by Biomass Semi-Coke AbsorbentsFeasibility Study on Coking Waste Water Treatment by Three-Dimensional ElectrodeEvaluation the Influence of Soil Solution Chemistry on Soluble Nickel Toxicity to Bok ChoyColor Removal from Dyeing Wastewater by the Polymer of Epichlorohydrin-EthylenediamineRemoVal of As (V) from Drinking Water by Attapulgite Loaded with Fe (III) AdsorbentTest Study on Combined Process of Clarification-Adsorption-Membrane Separation for Chemical Agent VX Polluted Surface Water TreatmentResearch of Key Techniques to Improve Quality and Yield in Inositol Production ProcessMethods of Porous Biomedical Material FabricationEffect of Camptothecin on the Embryonic Development and Angiogenesis of Zebrafish EmbryosA Tunable pH-Responsive Nanomaterials for Cancer DeliveryThe Basically Study on Arenga Engleri FiberBioactive Component Extraction from Antrodia camphorata Fruiting Body on Artificial Agar MediaSelective Breeding of Oxygen-Tolerant and Oxalate-Degrading Lactic Acid Bacteria by Protoplast FusionA New Host-Guest Biomaterial Apply for DNA Sequence Electrochemical DetectionOptimization of Determination Conditions for Protease in LandfillNew Integration Technology on Preparation of Natural Seleniferous Rice Protein Peptide with Enzyme and Ultrasonic-Microwave Synergistic TechnologyParameter Optimization of Biodegradable Polymer Materials Degradation Model Based on ACO AlgorithmExpression and Purification of His-chIFN-a and its Antiviral Activity AssayApplication of Chelating Agents as Cooking Aids in Bamboo PulpingAnti-Fatigue Activity of Pecan Oil in MiceSalidroside Inhibits Endogenous Hydrogen Peroxide Induced Cytotoxicity of Endothelial CellsImprovement of Impaired Memory in Mice by SchisandrinNovel Microwave Carbonization System for Coconut ShellsProtective Effect of Schisandrin on Hydrogen Peroxide-Induced Damage in PC12 CellsEffects of Radix Platycodonis Polysaccharide on Expressions of IFN-?, IL-4 and IL-5 in the Bronchoalveolar Lavage Fluid and Nf-?? in the Lung Tissue of Asthmatic RatsStudy on Purification of Tea Saponin by Foam Separation MethodSolid-Liquid Extraction Kinetics of Flavonoids from Okra (Abelmoschus esculentus l. Moench) Pods with Applicability AnalysisHow to Represent Respiratory System take Pathology into AccountEffects of Selenium Application in Soil on Formation of Iron Plaque outside Roots and Cadmium Uptake by Rice PlantsA New Rice Husk-Plastic Composite Powder Preparation Process for Selective Laser Sintering FabricationEffects of Zein on Film-Forming Ability and Properties of Wheat Gluten FilmsWater Prehydrolysis of Moso Bamboo Dissolving PulpExtraction and Antioxidant Property In Vitro of Cordycepin in Artificially Cultivated Cordyceps MilitarisModified Octyl-2-Cyanoacrylate Tissue Adhesive for the Closure of Long Surgical IncisionsComparison of Porosity Improvement of Silk Fibroin Membrane Using Polyethylene Glycol and Glutaraldehyde for Increasing Oxygen PermeabilityThe Characterization of a New Antibacterial PolyurethaneDetermination of Polyphenols in Lycopus lucidus Turcz by Capillary Electrophoresis with Electrochemical DetectionStudy on Capillary Electrophoresis?Amperometric Detection Profiles from Propolis and its Medicinal PreparationsIsolation and Biological Activities of Citral from Sweet Orange OilThe Formation of Plasma Acid at Atmospheric Pressure and its Application in Hydrolysis of Microcrystalline CelluloseDynamic Self-Assembly Process of a Designed PeptideThe Microstructure and Swelling Properties of Laminated HAp/CS HydrogelsA Modified Hydrothermal Synthesis and Luminescence of Hydroxyapatite Doped with Ce3+ and Tb3+ IonsPEG-PLGA Nanoparticle Modified by Transferrin Loading Doxorubicin: In Vitro and In Vivo Studies for GliomaThe Primary Investigation on Biological Effect of Mesoporous Bioactive Glass In VivoCu Ion Release and Cell Damage Effect of Cu-Containing IUDs with Different Surface Areas of CopperViscosity of Gelatin Solution Containing Cationic CrosslinkerDecomposition of Hydroxyapatite in Hydroxyapatite/Zirconia Composites for Dental Applications Study on Corrosion Property of Fluoride Treated Biodegradable AZ31 Magnesium AlloySynthesis of Poly(ethylene glycol) DerivativesResearch Progress of Molecular Imprinting TechnologyResearch and Evaluation of High Temperature Plugging AgentCarbonization Regime Process of Coal Tar Refined Soft PitchTiO2 Nanotube Film as the Support of Platinum Electro-Catalyst with Enhanced Electrochemical Activity for Methanol OxidationEffects of Carriers on Amination of Ethanol to Acetonitrile over Catalysts Loaded with CuNumerical Simulation on the Preparation of Vinyl Acetate Catalyst in Fluidized BedSynthesis, Structures and Properties of Two New Three-Dimensional Ce(III) Coordination Polymers with 2,2'-Bipyridine-4,4'-Dicarboxylic AcidExperimental Investigation on Coking Characteristics of China RP-3 Kerosene under High Temperature and Long-Duration ConditionsModelling of a Monolithic Solid Oxide Fuel CellAnalysis of Nitrogen Oxides Formation in CH4/Air Laminar Premixed FlameAdsorption Property of MgAl-NO3 Layered Double Hydroxides to Methyl OrangeStudy on a Novel Prerefining Catalyst for Hydrocracking ProcessThe Research of Mineralizers of the Silicon-chrome-Green PigmentSynthesis, Characterization and Properties of Arylamine-Acetylene Bridged Tetrahedral Cobalt and Iron Carbonyl ClustersStudy on the Control of Super-Fine Aluminum Hydroxide Particle Size from Sodium Aluminate SolutionsExperiment Investigation on Spontaneous Combustion of Iron Sulfides? in Oil TankSynthesis and Crystal Structure of a Novel 3D Sm(III) Coordination Polymer with Mixed LigandsSynthesis and Characterization of 4-Phenylethynylphthalic AnhydrideHigh Active Cu/SiO2 Catalyst Prepared by Hydrolysis-Polymerization Method for 2-Butanol DehydrogenationDehydrogenation of Sec-Butanol to Methyl Ethyl Ketone over Cu-ZnO Catalysts Prepared by Different Methods: Coprecipitation and Physical MixingStructural and Elastic Properties of Antimony Triiodide from First-Principles CalculationsPreliminary Study on the New Dual-Bed Photocatalytic Hydrogen Production SystemElectrochemical Performances of Li4Ti5-xAlxO12 (x=0.03, 0.05, 0.10) as Anode Materials for Lithium Ion BatterySynthesis, Characterization, Optical and Electrochemical Properties of Multinuclear Cobaltadithiolene Complex DerivativesInfluence of Carbonization Conditions on Mg Ion Concentration in Mg (HCO3)2 SolutionSynthesis of Monolithic Macroporous Carbon Xerogels from Phenol, m-Cresol, Furfural and Phosphoric Acid by Sol-Gel ApproachPreparation of Highly Dispersed Pt Supported on ?-Al2O3 with Strong Electrostatic AdsorptionPreparation and Properties of Gadolinium Homoleptic Double-and Triple-Decker Complexes Containing Tetrabenzoporphyrin LigandLiquid-Phase Oxidation of Toluene to Benzoic Acid over Manganese Oxide CatalystMethanol Dehydrogenation to Formaldehyde over Zinc Oxide-Modified Sodium CarbonatePreparation of Alcohol-Soluble Polyvinyl ButyralStudy on the Photocatalytic Properties with Different Ratio Films of ZnO:Fe2O3Synthesis, Crystal Structure and Photoluminescent Properties of a New Uranium-Containing SilicotungstateOxidation Kinetics of Magnesium Sulfite in Presence of Synthesized Solid CatalystDensity Functional Theory Study of Intermolecular Interaction between RDX and H2OStudy on Gasoline Combustion Dust with ASE and HPLCKinetics of Mesophase Sphere Formation of Toluene Soluble FractionDetermination of Inductive Ignition Period and Activation Energy of Food DustCharacterization of TiO2/ACF Preparation in Caprolactam Tetrabutyl Ammonium Bromide Ionic LiquidThe Magnetisc Study of the ZnO Thin Film with DefectsKinetic Monte Carlo Simulation of Surfactant-Mediated Thin Film GrowthInfluence of Ti Layer on the Structure and Properties of Al/Cu Thin FilmEffect of H2 on Microstructures and Properties of AlN Films Deposited by Reactive Magnetron SputteringSurface Modification of Parylene C Film and ApplicationThe Influences of Oxygen Content on Microstructures and Optical Properties of Al2O3 Films Deposited by Oxygen Ion Beam Assisted Pulse Reactive Magnetron SputteringPreparation of SiO2/PMMA Organic-Inorganic Hybrid Membrane via Microemulsion Situ Polymerization TechnologyStructure and Photoelectric Properties of Dy Doped CdS Polycrystalline Thin FilmsInfluence of Substrate Temperature on Properties of Transition Materials from Amorphous to Microcrystalline Silicon Prepared by VHF-PECVDTemperature-Graded Ferroelectric Thin Films under Two Boundary ConditionsPreparation and Characterization of Electrospun PVDF/PMMA Composite Fibrous Membranes-Based Separator for Lithium-Ion BatteriesThe Preparation and Property Research on Laponite-Poly (L-Lactide) Composite FilmImpacts of N2 Import into Reaction System on the Structures and Properties of the Graphite-Amorphous Carbon FilmsThe Structure and Properties Research on Poly(Lactide-Co-Trimethylene Carbonate) Film Prepared by Blow MoldingPreparation and Mechanical Properties Study of Blown Film from Star Copolymer of Poly(Epsilon-Caprolactone-co-L-Lactide)Preparation of Polypropylene and Polysulfone Composite Ultrafiltration Membrane though Physical Coating MethodMorphology and Properties of a Series of PVDF Blend MembranesStudy on Preparation of Nano-Sized Iron Oxide Thin Films and its ModificationStudy on the Key Technology of Membrane Roof Structure of Expo Axis in 2010 Shanghai World ExpoResearch on Electroless Plating of Poly (Ethylene Terephthalate) Films by a New Palladiumfree Activation ProcessPhysico-Mechanical Properties of the Cr-C and Mo-C CoatingsInvestigation of Surface Nanocrystallization by Pre-Forceing Rolling TechnologyThe Microstructure Inhomogeneity of the Laser Surface Hardened LayersThe Occurrence and Control of the Surface Defects of Color-Coated SheetsStudy on Electrochemical Corrosion Behavior Comparison between DLC and TiN Coatings under Different Corrosive EnvironmentImproved Wear and Corrosion Resistance of Ni-P Electroless Deposited Coating with RE AddedA Novel Method for the Measurement of Slight WearApplications of Spraying Technology in the Converter HoodEffect of Rare Earth Cerium on the Synthesis and Wear-Resistance of Electroless Ni-P-PTFE CoatingsThe Preparation and Microstructure of DLC Films Deposited through Plasma Electrodeposition in Water/Ethanol SolutionMicrostructure and Erosion Resistance of Hot-Dip-Aluminized 3Cr13 SteelEffect of Molybdate Bath Service Life on Corrosion Resistance of Conversion Coating Deposited on Hot Dip Galvanized SteelCorrosion Protection of Molybdenum-Phosphorus Compounds Based Coating Formed on Hot Dip Galvanized Steel in a Cl- Ione EnvironmentFabrication of Magnetic Cenosphere Deposited with Fe3O4 Nanoparticles by Hydrothermal MethodHyper-Dispersant Modifier Prepared and Applied in Polyethylene CompositesDynamic Simulation of Heating Situation of Spraying PowderEffect of Ni on the Properties of a Laser Surface-Clad Fe-Based AlloyEffect of Calendering Conditions on the Properties of PaperCoating Nano-Nickel Film on Cenospheres by Magnetic Sputtering MethodEffects of Vanadium on Microstructure and Properties of a Fe-Cr-W-Mo-V Overlaying AlloyThe Effect of Different CeO2 Addition on Performance of Ni-WC Composite Coating by Vacuum Fusion SinteringPreparation and Characterization of UV-Curable Talc/Acrylate Composite Coatings with Enhanced Flame-RetardancyElectroless Nickel Plating on ME20M Magnesium Alloys with an Environmentally-Friendly PretreatmentEffect of Stabilizers on Electromagnetic Property of Electroless Ni Coating on Aluminum PowderEffect of Temperature Induced by Laser Irradiation Processing on Fatigue Damage Repairing for Copper Thin FilmA Newly Developed Self-Bonded SiC RefractoryStudy of Metal Friction Materials Using Hot PressComputational Simulation and Prototype Testing of Nanocoating on Products in Aerospace IndustryMicrostructure and Oxidation Resistance of TiN CoatingsElectrochemical Impedance Spectroscopy Study of Nano-Materials Modified Fluorocarbon Coating of Metal SurfaceSynthesis of Carbon Nanocoatings on YG8 Hardmetal Substrates in Oxygen-Acetylene FlameInvestigating the Application of Nanoscale Bilayers Assembly on Stainless Steel Plate to Evaporation BehaviorMechanism and Experimental Research on Improvement in Conductive Performances of ZnO Coated Tourmaline PowderMicrostructure and Wear Resistance of ZrC Reinforced Metal Matrix Composite Coating by Gas Tungsten Arc CladdingEffect of N2 Flow on Microstructure, Mechanical Properties and Oxidation Resistance of CrNx CoatingsPreparation of Ceramic Surface Hydrophobic Coating by Sol-Gel MethodEffect of MgO Coating on Whisker Preform Strength of Aluminum Matrix Composite Fabricated by Squeeze CastingStudy on Technology of Multi-Trace Overlapping and Rapid Prototype by Broad-Beam Laser CladdingCorrelative Study of the Fabric Properties and the Shrinkage of GatherThe Application of New High-Strength Polyester Fiber Flexible Net for the End Coal Mining ThroughAnalysis on Development Status and Trend of Vehicle Materials YourThe Research on the Friction and Wear Behavior of FKM/NBR Blends under Water LubricationPressure Measurements of Aluminized Explosives Detonation Front with Different Aluminum Particle SizeFailure Analysis on Boiler Industrial Extraction Steam PipeConstitutive Equation of 5Cr21Mn9Ni4N Valve Steel during Hot CompressionCorrosion Failure Analysis of a Colored Steel Plate Used as the Workshop RoofStudy and Evaluation on Dispersion of Molybdenum Disulfide in Aqueous SolutionInfluence of the Cathodic Charging Current on Electrochemical Behaviors of X80 Steel in an Simulated Acidic Soil SolutionTheoretical Model Research of Metal Rubber MaterialResearch on Performance of the Cu-Based Friction Materials Repaired by Spark Plasma SinteringA Preliminary Study on Preparation of MgAlON RefractoryA Nonlinear Viscoelastic and Micromechanical Damage Constitutive Model for Solid PropellantAnalysis of Fracture Behavior of Metal/Ceramic Functionally Graded Materials under Thermal StressEffect of Helium on Stabilizing Vacancy Configuration in Delta-PlutoniumFinite Element Analysis of Thermal Stress for Femoral ProsthesisThe Feasibility Study on Stability of the Propellant GLQ by Testing the Content of the Centralite in with Gas Chromatography TestThe Pore Structure Multifractal Research of Low Silicon SinterPhase Difference Technique for Material Classification by Using Tuning Fork with Piezoelectric ResonatorCyclic Voltammetric Studies of the Behavior of Pb-0.3%Ag-0.06%Ca Rolled Alloy Anode during and after Zinc ElectrowinningPhase Composition Analysis of Recycled MgO-C Ladle Lining MaterialsA Study on Suizhong 36-1 Oil Field Acid Sludge Formation Influence FactorsJet Blast Resistance Experiment of Engineered Material Arresting SystemQSPR Study on Gross Heat of Combustion of Nitro Aromatic Compounds Based on Genetic AlgorithmThe Corrosion Failure Analysis of Plate Pipe for Plate Heat ExchangerThe Effect of Corrosion Inhibitor in Hydrofluoric Acid MediumThe Study on the Dynamic Response Performance of PEMFC Stack with Electrodeposited Pt/C-RuO2?xH2O ElectrodeCalculation and Analysis of Multifractal Spectrum of Sinter SurfaceTwo Temperature Model Numerical Simulation and Analysis of Thermal Transport Process in Copper FilmStudy on the Properties of the SPPs Self-InterferenceVariation of Surface Tension of Water in High Magnetic FieldResearch on the Relationship between Changes of Active Groups and Gaseous Products in Different TemperaturesOptimization of Shot-Peening Conditions and Wave Profiles to Improve Durability of Wave Cushion SpringThe Statement of Material Mix-Match in Jewelry DesignDevelopment of the Woolen 48Nm Cashmere YarnThe Effect of Steam Explosion Treatment on the Separation of Lotus FiberResearch on Structure and Properties of Camel WoolAntimicrobial Treatment of Bamboo Blending with Cotton Carpets Using Modified ChitosanDevelopment of Bamboo Charcoal Fiber Blended Anti-Ultraviolet FabricStudy on Coiled Fiber Height Distribution of Variable Cashmere SurfaceProduction of Sugar Beet and Maize as Energy Crops in Saline Alkali SoilEffects of 1-MCP and Controllable-Release SO2 Packaging on Cold Preservation of Grapes (C.V. Muscat Hamburg)Adhesion Properties of Pigment Dyes Using Ultrasonic EnergyInfluence of Fabric Textures on Pilling Performance of Wool SweatersEffect of Subsoiling Cultivation on Corn in Semi-Arid Region of Western Liaoning ProvinceEffect of Technology Factors on the Resin Impregnation Results of Poplar