Damage Assessment of Structures X

A Full-Field Stress Based Damage Assessment Approach for In Situ Inspection of Composite StructuresDamage Assessment of Structures Using only Post-Damage Vibration MeasurementsSimulation of Impact Damage in Foam-Based Sandwich CompositesIdentification of Composite Delamination Using the Krawtchouk Moment DescriptorEffect of Plate Curvature on Blast Response of Carbon/Epoxy CompositeUltrasonically Assisted Drilling: Machining towards Improved Structural Integrity in Carbon/Epoxy CompositesChanges in the Dynamic Behaviour of Carbon Fibre Reinforced Polymer Elements with Increasing DamageA Simulation-Based Monitoring of a Composite Plate Using an Integrated Vibration Measurement SystemDamage Detection in Composite Materials Using Airborne AcousticsAutomated Damage Detection in Composite Components Using Acoustic EmissionConsumed Fatigue Life Assessment of Composite Material Structures by Optical Surface Roughness InspectionInvestigation of Nonlinear Vibro-Acoustic Wave Modulation Mechanisms in Composite LaminatesInvestigation of Dynamic Fracture Behavior of GraphiteNumerical Procedures for Damage Mechanisms Analysis in CFRP CompositesMechanical Characterization of Hybrid (Organic-Inorganic) GeopolymersNon-Destructive Investigation of Glass Fiber Reinforced Composites via Magnetic Resonance ImagingDevelopment of a Remote Collaborative Visual Inspection System for Road Condition AssessmentPolymeric Bearings ? A New Base Isolation System to Reduce Structural Damage during EarthquakesSymptom-Based Reliability Analysis and Remaining Service Life Prediction of Deteriorating RC StructuresFinite Element Analysis for Structural Performance of Offshore Platforms under Environmental LoadsIdentifying Dynamic Characteristics of a Short-Span Viaduct from Vehicle-Induced Vibrations Considering Different Pavement and Parapet ConditionsNDT Data Fusion for the Enhancement of Defect Visualization in ConcreteMonitoring of Changes in Bridge Response Using Weigh-In-Motion SystemsInnovative Strategy to Reduce the Seismic Vulnerability of a RC Existing Building: Assessment and RetrofittingImpact of Road Profile when Detecting a Localised Damage from Bridge Acceleration Response to a Moving VehicleProbabilistic Modelling of the Deterioration of Reinforced Concrete Port InfrastructureInvestigating the Use of Moving Force Identification Theory in Bridge Damage DetectionTesting and Monitoring for a Large Scale Truss Bridge Using Long-Gauge Fiber Optic SensorsEvaluation of Timber-Concrete Floor Performance under Occupant-Induced Vibrations Using Continuous MonitoringThe Concept of Buildings Stability Monitoring and Damage DiagnosticsThe Impact of the Gigacycle Fatigue on Steel BridgesDamage Variation in Highway Bridge Piers for Rehabilitation with Different Reinforced OptionsA Parametric Study of a Drive by Bridge Inspection System Based on the Morlet WaveletOn the Seismic Performance of Elevated Water Tanks and their Control Using TLDsSustainable Design of Smart Health Facilities in Seismically Prone AreasRapid Assessment of Natural Periods of Large Short-Period Civil Engineering StructuresSeismic Damage Assessment of Regular Gravity Design BuildingsRe-Anchorage of a Ruptured Tendon in Bonded Post-Tensioned Concrete Beams: Model ValidationPost-Earthquake Damage Assessment Process and Problems in Turkey ? A Case Study in Van ProvincePedestrian Timber Bridges: Experimental Investigation and ModellingThe Sensitivity of Vibration Characteristics of Reinforced Concrete Beams under Incremental Static and Cyclic LoadingPolyVinyliDene Fluoride (PVDF) Material Based Energy Harvesting from Train and Damaged Bridge InteractionDynamic Testing and Long Term Monitoring of a Twelve Span ViaductControl Performance Evaluation to Avoid Pounding of BridgesAssessment of Structural Reliability of Bridge Beams Based on Measured SymptomsA Seismic Reliability Assessment of Reinforced Concrete Integral Bridges Subject to CorrosionDiagnosis of Damage in a Steel Tank with Self-Supported Roof through Numerical AnalysisEvaluating the Structural Capacity of Concrete Elements through In Situ InstrumentationNon-Destructive Tests for the Structural Assessment of a Historical Bridge over the Tua RiverExperimental Analysis of Bending and Axial Crush Behaviour of Single Hat Longitudinal RailOn the Assessment of Fatigue Damage in Railway BridgesFailure Stress in Notched Paper SheetsSpectral-Based Fatigue Assessment of Ball Grid Arrays under Aerospace Vibratory EnvironmentDetection of Bearing Spalling Faults Using IAS Monitoring System - Experimental Studies on the Influence of Operating and Environmental ParametersStochastic Modeling of Time Series with Application to Local Damage Detection in Rotating MachineryGear Fault Diagnosis Using Synchro-Squeezing Transform Based Feature AnalysisModal Strain Energy Based Damage Detection Applied to a Full Scale Composite Helicopter BladeUtilizing Data from a Sensorless AC Variable Speed Drive for Detecting Mechanical MisalignmentsBearings Fault Detection in Gas Compressor in Presence of High Level of Non-Gaussian Impulsive NoiseConcordia Transform-Based Current Analysis for Induction Motor DiagnosisThe Fault Characteristics of Planetary Gear System with Tooth BreakageSpalling Size Evaluation of Rolling Element Bearing Using Acoustic EmissionIn-Service Measurement of the Small Wind Turbine Test Stand for Structural Health MonitoringRapid Assembly of Multifunctional Thin Film Sensors for Wind Turbine Blade MonitoringVirtual Structural Monitoring of Wind Turbines Using Operational Modal Analysis TechniquesNon-Linear Aeroelastic Stability of Wind TurbinesFatigue Analysis of Offshore Wind Turbines on Fixed Support StructuresAdvanced Tools for Damage Detection in Wind TurbinesDamage Identification in a Laboratory Offshore Wind Turbine DemonstratorDynamic Responses of a Scaled Tension Leg Platform, Wind Turbine Support Structure in a Wave TankSimulation of the Stochastic Wave Loads Using a Physical Modeling ApproachFailure Analysis of Wind Turbines by Probability Density Evolution MethodGeneralized Stochastic Constraint TARMA Models for In-Operation Identification of Wind Turbine Non-Stationary DynamicsNumerical Modeling to Aid in the Structural Health Monitoring of Wave Energy ConvertersModal Analysis for Crack Detection in Small Wind Turbine BladesDynamic Stall on Rotating Airfoils: A Look at the N-Sequence Data from the NREL Phase VI ExperimentFeature Selection - Extraction Methods Based on PCA and Mutual Information to Improve Damage Detection Problem in Offshore Wind TurbinesOn Structural Health Monitoring of Wind Turbine BladesOn the Modeling of Spar-Type Floating Offshore Wind TurbinesOffshore and Onshore Wind Energy Conversion: The Potential of a Novel Multiple-Generator DrivetrainMonitoring Changes in the Soil and Foundation Characteristics of an Offshore Wind Turbine Using Automated Operational Modal AnalysisActive Tuned Mass Damper Control of Wind Turbine Nacelle/Tower Vibrations with Damaged FoundationsActive Blade Pitch Control for Straight Bladed Darrieus Vertical Axis Wind Turbine of New DesignLow-Cost Tower Root Fatigue Load Estimation for Structural Health Monitoring of Grouted Connections in Offshore Wind TurbinesDamage Detection Using Electromechanical Impedance Technique Combined with Scanning Laser VibrometryAnalyzing the Strain Sensing Response of Photoactive Thin Films Using Absorption SpectroscopyApplication of Piezo Sensors in EMI and Guided Wave TechniquesCharacterization of CFRP Using Laser VibrometryImpact Localisation in Orthotropic Plates Using Flexural Wave Intensity MeasurementSensors and Methods for Blade Damage Operational Assessment in Low-Pressure Steam Turbine StagesInterpolation Damage Detection Method on a Suspension Bridge Model: Influence of Sensors DisturbancesCompressive Sensing for Structural Damage Detection of Reinforced Concrete StructuresSensor Performance Assessment Based on a Physical Model and Impedance MeasurementsThe Status of Research on Self-Sensing Properties of CNT-Cement Based Composites and Prospective Applications to SHMVision-Based Sensing in Dynamic TestsWireless Sensor Network for Helicopter Rotor Blade Vibration Monitoring: Requirements Definition and Technological AspectsAn Analysis of the Effectiveness of Application of Rotation Rate Sensors in Non Destructive Damage EvaluationHow Many Vibration Response Sensors for Damage Detection & Localization on a Structural Topology? An Experimental Exploratory StudyInvestigating the Flexural Behaviour of Foams at High Strain Rate Using Optical Measurement TechniquesDesign and Validation of Embedded Piezoelectric Transducers for Damage Detection Applications in Concrete StructuresSensor Fusion on Structural Monitoring Data Analysis: Application to a Cable-Stayed BridgeDamage Detection of a Substructure Based on Response Reconstruction in Frequency DomainIntegrating Singular Spectrum Analysis with Damage Detection of StructureA Two-Stage Scheme for Plate Damage Identification Based on Lock-in Thermography and Dynamic AnalysisDamage Detection in a Glass Plate Using Outlier AnalysisNumerical Studies on Wavelet-Based Crack Detection Based on Velocity Response of a Beam Subjecting to Moving LoadTwo Dimensional Damage Localization Using the Interpolation MethodSpatial Filter for Operational Deflection Shape Component FiltrationDamage Detection in Nonlinear Structures Using Discrete-Time Volterra SeriesCointegration and the Empirical Mode Decomposition for the Analysis of Diagnostic DataApplication of the Hilbert-Huang Transform for Identification of Changes in Boundary Conditions of a Bridge Using Vibration Data due to TrafficEstimating Vibration-Fatigue-Life on Experimentally Acquired DataDamage Detection Using Cointegration Technique and Wavelet Analysis of the Post-Cointegrated Lamb WavesDamage Detection Using Principal Component Analysis Based on Wavelet RidgesNon-Linear Vibro-Acoustic Wave Modulations - Analysis of Different Types of Low-Frequency ExcitationMonitoring Dynamic Structural Tests Using Image Deblurring TechniquesExtension of Lamb Waves Defect Location Techniques to the Case of Low Power Excitation by Compressing Chirped Interrogating PulsesUnscented Kalman Filter for Non-Linear Identification of a New Prototype of Bidirectional Tuned Vibration Absorber: A Numerical InvestigationImaging and Characterizing Structural Defects through the Estimation of Local Dispersion CurvesEngine Assembly Quality Defect Inspection Based on EMD-Envelope SpectraReal-Time Autonomous Structural Change Detection Onboard Wireless Sensor PlatformsNovel Approaches for Processing of Multi-Channels NDT Signals for Damage Detection in Conveyor Belts with Steel CordsUse of LU Decomposition of Modal Flexibility in Structural Damage Detection: Numerical ValidationReal Human Hearing: Damage Detection and Monitoring of the Treatment EffectivenessUltrasonic Guided Wave Tomography for Damage Detection in Harsh EnvironmentDetection and Quantitative Assessment of Damages in Beam Structures Using Frequency and Stiffness ChangesCrack Location in Beams Using Wavelet AnalysisOn the Use of Low and High Cycle Fatigue Damage ModelsSynthetic Aperture Focusing Technique for Detecting Transverse Cracks in Austenitic and Dissimilar WeldsOn the Integration of Real-Time Diagnosis and Prognosis for Scheduled Maintenance OptimizationSmart Structural Health Monitoring Validated on a Simple Plate under Compressive LoadingAnalytical Modelling of Bond Strength Degradation due to Reinforcement CorrosionInvestigation of Dynamic Response of a Railway Bridge Equipped with a Tailored SHM SystemInfluence of Physical Parameters and Operating Conditions for Structural Integrity of Mechanical System Subjected to Squeal NoiseOperational Deflection Shape for Crack Detection in StructuresVibration-Based Structural Health Monitoring of a Simulated Beam with a Breathing CrackMagnetic NDT and Computer Modeling of Steel Rope Deterioration in Suspended BridgesComparative Study of Robust Novelty Detection TechniquesVibration Methods of Damage Detection in Initially Symmetric StructuresAnaerobic Corrosion of ReinforcementExperimental Investigation on Improving Electromechanical Impedance Based Damage Detection by Temperature CompensationComparison of Full Field Strain Distributions to Predicted Strain Distributions from Limited Sets of Measured Data for SHM ApplicationsUncertainty Modeling and Quantification for Structural Health Monitoring Features Derived from Frequency Response EstimationStrength Assessment of Deteriorated OHL Conductors and Earth Wires Based on Non-Destructive TestingDefect Detection Using Pulse Phase Thermography - Repeatability and Reliability of DataExperimental Testing of a Cross-Entropy Algorithm to Detect DamageRFID Based Sensing for Structural Health MonitoringEnergy Correlated Damage Indices in Fatigue Crack Extent QuantificationThe Dynamic Behaviour of a Buried Water Pipe and its Effect on Leak Location Using Acoustic MethodsWavespeed Measurement in Buried Water Distribution Pipes and its Significance in Leak LocationAssessment of Historic Structures Based on GPR, Ultrasound, and Impact-Echo Data FusionStructural Health Monitoring under Varying Environmental Conditions Using WaveletsDamage Assessment in a Cracked Fiber-Reinforced Cantilever Beam Using Wavelet-Kurtosis TechniquesModelling of Piezo-Bond Structure System for Structural Health Monitoring Using EMI TechniqueDamage Detection of Shear Connectors Based on Power Spectral Density TransmissibilityMulti-Technique Approach for the Assessment of Historical Masonry ConstructionsApplication of Multiple Objective Particle Swarm Optimisation in the Design of Damaged Offshore Mooring SystemsA Compensation Method for Environmental Influences on Passive Lamb Wave Based Impact Evaluation for CFRPDetection and Localisation of Structural Damage Based on the Polynomial Annihilation Edge Detection: An Experimental Verification