Testing and Evaluation of Inorganic Materials II

Development and Application of Test Equipment for Torsion Strength of Non-Metal MaterialsRelationship between the Ratio of Young?s Modulus to Hardness and the Elastic Recovery of NanoindentationAnalysis of Load-Displacement Curves of Ceramics Measured with Low-Load Vickers Hardness Test: Indentation Size EffectFracture Behavior of SiC-TiB2 Composite Measured by Different Test MethodsThe Influence of Specimen Grips on the Measurement of Micro-Tensile Bond Strength to Human DentinInfluence of Multiple Firing on the Bending Strength of Zirconia/Porcelain Bilayered Dental CeramicsComparison of Fracture Strength and Fracture Modes of Zirconia Dental Ceramics Manufactured by Four Different CAD/CAM SystemsFatigue Damage Modes of Bilayered Zirconia and Alumina Dental CompositesDamage Mechanism of Short Carbon Fiber Reinforced SiC-Based CompositeEvaluating Impact Properties of Cement Clinker at Different Angle for Impact IndentationAn Experimental Study of the Nano-Scratch Behavior of Cement Composite MaterialMicrostructure of Interface between Zirconia and Veneer PorcelainEffect of Temperature on the Interfacial Bonding Strength between PVB and Glass from RT to -50 ?CEffects of Surface Treatment on the Microstructural and Crystallographic Changes of Dental 3Y-TZP CeramicMechanical Properties of Y-TZP Ceramic after Different Surface TreatmentsEvaluating Erosion of Engineering Materials Subject to Cavitation in Liquids on a Ultrasonic Vibratory ApparatusEvaluation on Structure and Tribological Properties of Carbon Nitride Films Deposited on YG8 Carbide Alloy SubstratesSolid Particle Erosion Behavior of 3YSZ Ceramics at Elevated TemperaturesPreparation of MgO-Partially Stabilized Zirconia Nano-Powder by Coprecipitation PressingMethod and Equipment for the Measurement of the Uniformity and Cohesiveness of Concrete MixtureMicrostructure and Properties Evaluation of WTi(C,N)-06 Cemented Carbide with TaC and NbCInvestigation of Microstructure and Mechanical Property of the Fe3Al/Al2O3 Composites Fabricated by Mechanical Alloying Process and Hot-Pressing ProcessComparison of the Low Temperature Degradation Properties of Two Y-TZP Ceramics for Dental ApplicationsMicrostructure Characteristics of the Black-Glazed Shreds Excavated from the Qingliangsi KilnRelationship between the Conductivity of Supernatant of 3Y-TZP Powder and Sintering Properties of its CeramicsDensification Mechanism of the Low Temperature Co-Fired Glass-Ceramic SubstrateLateral Confinement and Ballistic Performance of TiC-TiB2 CompositesBallistic Performance of TiC-TiB2 Composite Armour under the Impact of Long-Rod Tungsten Alloy Projectiles of 1.4 Km?s-1Microwave Sintering of SiCp/Al CompositeStructure and Characteristics of Spherical-Pore Silicon CarbideStudy on Surface Characterization and Properties of Three Dimensional Nano-Porous Titanium FilmPreparation of Si-C-N-O Amorphous Films from a Polysilazane by Heat Treatment at High-TemperaturesSynergistic Effect of Cr-Doped DLC Coatings and Lubricant AdditivesPreparation and Characterization of Nano-Films MaterialsEstimate of Thermodynamic Indirect Measurement on the Electrocaloric EffectAnisotropic Permittivity Measurement of Layered Inorganic CompoundsLaboratory Testing of Piezoelectric Bridge Transducers for Asphalt Pavement Energy HarvestingRepresentation Methods for Microwave Absorption CeramicsTest Method and Equipment for Electrically Conducting Property of Ceramic/Carbon CompositesAssessment on the Electrical Conductivity of Additive Fillers into Carbon Fiber-Cement Based CompositesPreparation and Characterization of Lead-Free Piezoelectric CeramicsDielectric and Piezoelectric Properties of Lead Free (1-x-y)Na1/2Bi1/2TiO3-xBaTiO3-yBiFeO3 Piezoelectric CeramicsPreparation and Characterization of Lead-Free Na0.54K0.42Li0.04NbO3 Nano-Powders by Sol-Gel MethodPreparation and Characterization of BiFeO3 Film via Sol-Gel Spin-Coating ProcessElectrical Characteristics and Microstructures of Dy2O3-Doped Bi4Ti3O12 Thin FilmsElectrical Characteristics and Microstructures of Eu2O3-Doped Bi4Ti3O12 CeramicsFerroelectric Properties of Bi3.25Gd0.75Ti2.97V0.03O12Preparation and Characterization of Textured CaBi4-XLaXTi4O15 CeramicsElectrical Characterization and Microstructures of Ce-Doped Bi4Ti3O12 Thin FilmsFerroelectric Properties and Microstructures of Dy2O3-Doped Bi4Ti3O12 CeramicsFerroelectric Properties of Bismuth Titanate Ceramics by Eu3+/V5+ SubstitutionNegative Resistance Behavior of Ferroelectric Bismuth Titanate Ceramics at Low FieldElectrical Behaviors of Bi2WTi3O12 CeramicsMeasurements of Thermoelectric Behavior and Microstructure of Carbon Nanotubes/Carbon Fiber-Cement Based CompositeSynthesis of ZnO/MWCNT Heterostructure via the Self-Assemble Route and its PropertyGrain Growth in (Ga, Mn)-Codoped ZnO CeramicsSynthesis, Structure and Properties of Super Fine Zn2SnO4Synthesis and Electromagnetic Properties of Hollow Ceramic MicrospheresPreparation and Magnetic Properties of a-MnO2 NanoparticlesExperimental Study on Magnetic Fluids Viscous DamperAnalysis and Experimental Study on Magnetic Fluid Seal MechanismExperimental Study of Surface Tension Coefficient for Magnetic FluidExperimental Study of Large Gap Magnetic Fluid Static SealingDesign and Calculation of Magnetic Liquid Seal with Rectangular Pole TeethCharacteristics of TiO2 Nanotube Arrays on Titanium Prepared by AnodizationHydrogen Sensing Properties of Dye-Sensitized TiO2 Nanotube ArrayLow-Temperature Synthesis and Gas Sensing Properties of Anatase TiO2 Thin FilmsDischarge Relaxation of TiO2-WO3 Composite Nanotube ArraysEffect of Au Doped WO3 Gas Sensors for NO2 DetectionCharactering and Sintering of BaZrO3 Doped with TiO2Fabrication and Photoelectrochemical Properties of CuO/TiO2 Heterojunction Nanotubes Array FilmLuminescence Properties of Eu2+ Doped ?-SiAlON PhosphorSolvothermal Synthesis and Characterization of Two Iron ComplexesEvaluation of Thermal Performance for Vacuum Glazing by Using Three-Dimensional Finite Element ModelEvaluation of Thermal Shock Resistance of Alumina CeramicsThermal Decomposition of Dolomite Containing PhosphorusStudy of Natural and Synthetic Quartz by Raman SpectraTesting and Evaluating Method of Dispersion of Carbon NanotubesMeasuring the Infinite Optical Thickness of Dentine Porcelain of the IPS E.maxContrast Ratios and Chromatic Value of IPS E.max LT Framework MaterialsRelative Translucency of IPS E.max LT Core Materials after Veneering and GlazingSoak Colored Zirconia Ceramics and its Colorimetric PlateThe Correlation between Play-of-Color Effect and SiO2 Cavities Size of Australian Blue OpalInfluence of Fe2+ on the Color Appearance of Yellow-Green PeridotDifference Analysis of Different Standard Illuminants on Yellow-Green to Green Jadeite-JadeInfluence of Light Source and Cathodoluminescence on the Color Parameters of Ruby RedMeasurement and Research of the Transverse Mechanical Properties of High Performance FibersStudy on Gemological and Mineralogy Features of Huanglong JadeInfrared and Visible Spectrum Study on Yellowish Green Peridot from JinlinIntercalated Modification of SuzhoutuThe Contribution of Co2+ to Blue Color of Synthetic SpinelA Study on Color Stones of Clay Minerals ? Changhua StoneReliability Evaluation of Glass Curtain Wall via Vibration DetectionPhases Transformation of Boron Mud during Carbothermal Reduction ProcessApplication of Argon Ion Beam Cross Section Polishing in Material Microstructure ResearchEffects of Internal Standards and Peak Profile Functions on Quantitative XRD Phase Analysis of Cement and its HydratesFT-IR Study on Early-Age Hydration of Alkali-Activated Slag CementStudying Blended Cement Paste with Nuclear Magnetic Resonance Relaxation TimeEvaluation of Water Evaporation in Cementitious Materials by Low Field NMRDetermination of Silicon Content in SiC Ceramics Precursor by Modified TitrationDetermination of Main Component and Purity of Oxide by Mass Balance of Difference-Determination for ZrO2+HfO2Assessment of Ultrasonic-Ethanol Extraction to Determine the pH Value of Hardened Cement PastesAccelerated Carbonation Test Equipment of ConcreteData Acquisition and Control System of Hip Joint Simulator Based on LabVIEW and DSPStudy on the Glassy Phase Composition of 95 Al2O3 CeramicsPhase Composition, Microstructure and Mechanical Properties of Aluminous Cements Containing Magnesium Aluminate SpinelPhase Behavior of Silica Brick Used in Carbothermal ReductionInfluence of Temperature on Phase Composition of Nitridation Products from Rutile and Fly AshEffect of Temperature on the Phase Behaviors of Zircon by Carbothermal Reduction-NitridationMicrostructure, Mineral Phases and Strength of the Foam ConcreteTrue Density Measurement of Refractory by AccyPyc1330 PycnometerPurification of Carbon Nanotubes Synthesized by Pyrolysis FlameEffects of Feed Shoe Wheel Speed on Tablet Weight VariabilityPermeability Characteristics of Human Dentin and a Porous CeramicBiological Safety Assessment of a Colored Zirconia Ceramic: Hemolysis and Short-Term Systemic Toxicity TestsBiological Safety Assessment of a Colored Zirconia Ceramic: Cell Toxicity and Skin Sensitivity TestsMinocycline Modification of Gelatin-Hydroxylapatite Composite by Co-Precipitation MethodThe Anti-Erosion Properties of Pyrochlore Simulated Waste FormsEffect of Atomic Oxygen Exposure on Polyhedral Oligomeric Silsesquioxane/Polyimide Hybrid Materials in Low Earth Orbit EnvironmentPreparation and Performance Test of Epoxy Modified Silicone ResinsEstablishment of Energy Efficiency Evaluation System for New Suspension Preheater Cement Enterprise in ChinaThe Analysis of the Function and Principle on Air Cooling PV Double-Glass WindowThe Prospective Analysis of Listed Ceramic Companies in ChinaStress-Sensitive Property of Carbon Fiber Reinforced Cement under Cyclic LoadOne Monitoring Device for Concrete Early Age Shrinkage