Advances in Fracture and Damage Mechanics XIV

Fracture Prediction for Ultralow Carbon Steel Sheet Subjected to Draw-Bending Using Forming Limit Stress CriterionInfluence of Small Cavity Existing in the Vicinity of 3D Crack FrontComputation of Effective Material Properties in Smart Composite Materials by a Symmetric Galerkin BEMMulti-Physics and Multi-Scale Deterioration Modelling of Reinforced ConcreteExperimental Analysis of Ti6Al4V Orthogonal CuttingDuctility of Ultra-High Performance Concrete and its Correlation with Tensile Strength IncreaseRheological Study of the Performance and the Vulnerability of an Element of RC Structure during and after a Seismic SignalExperimental Tensile Tests on Bone Cement: Effect of Test Sample ShapeOn the Influence of the Contact Force and the Angle between the Wires on ACSR Conductors? Mechanical Properties and DurabilityLight Alloys Structural Behaviour in Severe Environmental ConditionsEvaluation of Bond Strength between Steel Fiber Reinforced Ultra-High Strength Concrete and RebarBoundary Element Analysis of Stiffened Panels with Repair PatchesDifferent Inclusion Contents in H13 Steel: Effects on VHCF Response of Gaussian SpecimensMixed-Mode Crack Patterns in Ordinary State-Based PeridynamicsFlexural Property and In Situ Observation of Carbon Milled Fiber Added Plain Woven Carbon Fiber/Epoxy Resin CompositePreparation and Characterization of Halloysite Nanocomposites by Rapid Prototyping TechnologyA Micro-Mechanical Model for Grain-Boundary Cavitation in Polycrystalline MaterialsFatigue Resistance of Laser Welded S355 Steel SheetHigh Temperature Low Cycle Fatigue Characteristics of Grit Blasted Polycrystalline Ni-Base SuperalloyNumerical Fracture Analysis of Compact Tension Shear (CTS) Specimens with Tortuous Crack FrontsInelastic Dynamic Seismic Response of 15-Story and 25-Story RC Buildings with and without Shear Walls Designed with the Mexico City Building CodeEffects of Fine Particle Peening on Fatigue Strength of Transformation-Induced Plasticity (TRIP)-Aided Martensitic SteelFatigue Crack Growth Behaviour of Friction Stir Welded Aluminium AlloysDescription of Strengthening Mechanism in Layered Ceramic CompositesEvaluation of J Integral for Interacting Twin Collinear Through-Wall Cracks in a Plate under TensionEvaluation of Defects in Adhesive Joint by Double Cantilever Beam ExperimentCrack Bridging Modelling in Bioglass? Based Scaffolds Using Gradient Elasticity TheoryCalibration Function for Fatigue Crack PropagationInterfaces Behavior in Glued Granular MaterialsCrack Coalescence and Failure Patterns in Brittle Rock-Like Specimens with Pre-Existing Fissures under Uniaxial Loading: Experimental StudiesPounding between Inelastic Three-Storey Buildings under Seismic ExcitationsInfluence of Size and Proximity of Paint Coating Defects on Corrosion Behavior of Carbon Steel PlatesMechanical and Fatigue Parameters of Two Types of Alkali-Activated ConcreteInfluence of Semi-Circular Cracks on Threaded Connection Fatigue by Means of Kitagawa-Takahashi Diagram and El Haddad EquationPredicting Micro-Mechanics Damage Behaviour at a Metal-Ceramic Interface in a Reinforced AlloyTEM Study of Microstructure Changes, Formation and Distribution of Slip Bands in Austenitic Steels after Low-Cycle Fatigue (LCF) Deformation - IIDeformation of Electroelastic Materials with Dispersed MicrodamageabilityInvestigation on Damage Tolerance of Thick Laminate Composite StructureStrength Prediction of Laminated Composites upon Independent Constituent PropertiesSimulation of the Transient Behavior of Matter with Characteristic Geometrical Variations & Defects Irradiated by Nanosecond Laser Pulses Using FEAThree-Dimensional Modeling of Single-Lap Joints with Variable Interfacial Crack Length A Simulation Study of Surface Breaking Crack in Concrete Beam Based on Time-Reversed Theory of Surface WaveInterfacial Fracture Strength of Micro-Scale Si/Cu Components with Different Free-Edge ShapeThe Role of Residual Stresses in Particulate Composite with Glass MatrixThe Research about the Strength of Composite Riser Pipes Based on Finite Element Method Second-Order Computational Homogenization Approach Using Higher-Order Gradients at MicrolevelStudy on the Physical Properties of Recycled Cold Asphalt Using Cementless BindersStudy on the Durability of Cementless Concrete Produced with Industrial By-ProductsExperimental Study on the Microstructure of Cementless Concrete through the SEM and XRD AnalysisEffect of Resin Particle on Interfacial Shear Strength of CF/MAPP after ImmersionNumerical Simulation of Strain Localization of Rock-Like Material Containing Single FlawThe Influence of Wedge Shape on the Determination of Dynamic Fracture Toughness in SHPB TestUnable to Detect Burial Defective Rubber Sheet in Digital Image Correlation MethodResearch on the Variation of Residual Stress in the Rail Caused by the Wheels Repeated RollingMechanical Properties and Corrosion Mechanism of GFRP Rebar in Alkaline SolutionAn Effect of Laser Hardening on Contact and Bending Fatigue of a 42CrMo4 SteelFailure Susceptibility in Thin Films with Extensive Incompatibility in Thermo-Elastic Material PropertiesStudy of Reticulated Vitreous Carbon Foam as a Quasi-Brittle MaterialEffect of Voids on a Magistral Crack in Piezoelectric Brittle MaterialsDamage Model for Degradation Induced by Volcanic Ash Deposition on Thermal Barrier CoatingsStatistical Analysis of SHM Passive Sensing SystemsOn the Role of Double Die Angle on the Hydrogen Embrittlement of Cold Drawn Prestressing Steel WiresUncertainty Analysis of Active SHM SystemFracture Events Localization by Numerical Simulations of Cementitious CompositesOn the Validation of Williams' Stress Function for Dynamic Fracture MechanicsEnergy Dissipation during Quasi-Brittle Fracture Associated with the Crack and the Fracture Process Zone ProgressionA Dual Boundary Element Model for Electromechanical Impedance Based Damage Detection ApplicationsOptimal Sensor Placement for Damage Detection Based on Ultrasonic Guided WaveApplication of the Nonlinear Model of a Beam for Investigation of Interlaminar Fracture Toughness of Layered CompositeNumerical Investigation of a Stiffened Panel Subjected to Low Velocity ImpactsFinite Element Analysis on Crack Tip Deformation Behavior under Mode-II Loading in Single Crystal SuperalloyAnalytical Tool for the Preliminary Design of an Adhesively Bonded T Joint