Surface Modification Technologies

Investigations of In Vitro Corrosion, and Wear Properties of TiN PVD Coating on Ti6Al4V Alloy for Dental ApplicationCold Gas Dynamic Spray Technology: The Simulation of Aerodynamics of FlowModel of Alumina Coating Microstructure Developed on the Base of Electrical Insulation PropertiesImprovement of Hydrophobic Property of Stainless-Steel Plates by Forming Lens-Like Protrusions Similar to Oxalis Leaf SurfacesForming Process during Electron Beam Surfi-SculptTM on Ti-6Al-4V AlloyThe Impact of Formation of Oxide Layer on the Piston Crown Using Micro - Arc Oxidation on the Characteristics of the Spark Ignition EngineAn Easy Approach for Obtaining Superhydrophobic Surfaces and their ApplicationsNanocrystallisation of Nickel Free High Nitrogen Austenitic Stainless Steel through Ultrasonic Shot PeeningModification of the Mechanical Properties of Vitreous Enameled Aluminium Substrate Adding Graphene FlakesExperimental Study of Laser Texturing Processes on the Lubricant Retention of Carbide (WC-Co) SurfacesInfluence of Applied CrN+WC/C and WC/C Coatings on the Cavitation Wear Processes of Constructional ElementsExperimental Study of Cold Sprayed Metallic Coatings on Thermoplastic Matrix CompositesCold Sprayed Coatings for Repairing Damaged Metallic StructuresThe Influence of Silicon Carbide Powders on the Enhancement of the Wear Resistance of Epoxy ResinElectrochemical Characterization of Ti6Al4V Components Produced by Additive ManufacturingInfluence of Processing Parameters on the Local Scratch Resistance of Cold Sprayed Ti6Al4V CoatingsCatalytic Hydrogenation of Acetone to Isopropanol on Bimetallic Silver-Gold NanocatalystInfluence of Building Parameters on Surface Aspect and Roughness in Additive Manufactured Metal PartsInfluence of Cold Spray Nozzle Displacement Strategy on Microstructure and Mechanical Properties of Cu/SiC Composites CoatingWettability Behavior of Ti6Al4V Electron Beam Melted SurfacesEnhancement in Fatigue Life of Ti-13Nb-13Zr Alloy through Ultrasonic Shot PeeningInfluence of Abrasive Materials in Fluidised Bed Machining of AlSi10Mg Parts Made through Selective Laser Melting TechnologyMechanical and Corrosion Behavior of TiN Coatings Deposited on Nitrided AISI 420 Stainless SteelEffects of Nano-Ceramic Particle Addition for Cold Sprayed Fluoropolymer CoatingsResidual Stresses in Similar and Dissimilar Friction Stir Welds of AA5083 and AA6061Co-Deposition and Characterization of Hydroxyapatite-Chitosan and Hydroxyapatite-Polyvinylacetate Coatings on 304 SS for Biomedical DevicesLaser Assisted High Entropy Alloy Coating on Low Carbon SteelBiomineralization of Titanium Alloy with Surface Micro - and Nanoscaled ModificationsAssessment of Heat Treatment Effect on AlSi10Mg by Selective Laser Melting through Indentation TestingEthylene Oxide Sterilization of TiN/TiO2 Coated Titanium Implant MaterialOptimization of Microstructural Evolution during Laser Cladding of Ni Based Powder on GCI Glass MoldsIn-Process Laser Re-Melting of Thin Walled Parts to Improve Surface Quality after Laser Metal DepositionImproving the Surface Finish and other Properties of Engineering Metal PartsStudy of the FDM Parameters of the ABS Parts in the Surface Quality after Machining OperationsCorrosion Wastage Models for Steel Structures: Literature Review and a New Interpretative Formulation for Wrought Iron AlloysSurface Modification of Titanium ImplantsLaser Surface Treatment of Sintered Stainless Steels for Wear Resistance EnhancementMultifunctional Bioceramic Composite Coatings Deposited by Cold SprayMechanical and Functional Properties of Cavitation Generators with PVD Functional Coatings Intended for Use in the Cavitation EnvironmentAir-Cooling Influence on Wire Arc Additive Manufactured SurfacesLeveling Power of Co-W and Fe-W Electrodeposited CoatingsMorphological and Chemical Characterization of Laser Treated Surface on CopperExperimental Investigations on Tire/Road Friction Dependence from Thermal Conditions Carried out with Real Tread Compounds in Sliding Contact with Asphalt SpecimensExperimental Study of Functionalized Polymer Matrix Composite with Multi-Material Metal Coatings Produced by Means of Cold Spray TechnologyAFM Measurements of the Deformation Kinetics of Silica Oxide Dots Deposited on a Sequentially Nitrided Stainless SteelEnhanced Durability of Graphene-Based Epoxy FilmsEffect of Fluoride Addition in Sulfuric Acid-Based Desmutting Solution for Aluminium Alloy AA8006A Tribochemical Boost for Cu Based Lubricant Nano-AdditiveMicrostructure and Corrosion Properties of PEO Coatings Produced on AM-Aluminum AlloysGTAW-Pulsed Refusion Patterns of NiCrBSi Thermal Sprayed CoatingsCold Wall CVD Graphene-Based Transparent Electrode for Solar CellsSolar Selective Coating for Thermal ApplicationsOsteoblast Cell Response to LIPSS-Modified Ti-ImplantsSurface Plasma Nitriding of Beta-Titanium Alloy Bio-MaterialMechanical and Chemical Characterization of Hard Anodized Cooker Grids Made in Al-Si AlloyComparison of Tribological Behaviour between Natural and Synthetic Fibres CompositesIncreasing of ENF Bonded Joints Performance by Design of Laser Surface TexturingEffects of Surface Treatments on the Fatigue Response of High Strength FastenersA Finite Elements Study on Porosity Creation Mechanisms in Cold Sprayed CoatingsEffect of Optimized Heat Treatments on the Tensile Behavior and Residual Stresses of Selective Laser Melted AlSi10Mg SamplesEffect of Carbon Nanotubes Dispersion on the Microhardness of CFRP CompositesInfluence of the Metallic Cold Spray Deposition on the Low-Velocity Impact Behaviour of Composite LaminatesEvaluation of Tribological Properties of Hard Coatings Obtained on Steel C45 by Electro-Spark AlloyingImpact Wear Resistance of Nanocomposite Coatings for Aircraft ComponentsStationary Shoulder Friction Stir Processing: Influence of Tool Wear on Surface PropertiesSurface Induction Hardening of Steels: Process Modelling and Numerical SimulationEffect of Multi Pass Friction Stir Processing on Surface Modification and Properties of Aluminum Alloy 6061Multi-Layer Cold Spray Coating: Strain DistributionImpact-Sliding Wear Behaviour of Nitrided H13 Steel Tool SteelsCold Spray for Additive Manufacturing: Possibilities and ChallengesTantalum Based High-Pressure Cold Spray Coatings on Stainless Steel SubstrateAn Experimental Characterization of Powder/Substrate Interaction during Direct Metal Deposition for Additive ManufacturingEffect of Plasma Surface Treatment on the Impact Behavior of Basalt/Epoxy CompositesSet-Up of an Experimental Procedure for the Surface Smoothing of FDM Parts through Acetone VaporTribological Behavior of a Polyester Composite System under Severe Wear ConditionsCold Spray Technology to Promote Conductivity of Short Carbon Fiber Reinforced Polyether-Ether-Ketone (PEEK)