Euro Ceramics V

Hydrothermal Processing of Perovskite PbTiO3 PowdersExtraction of Binders with Supercritical Carbon DioxideNanostructured Ceramics via Microemulsion Processing RoutesNovel Ceramic Processing Methods Using Responsive PolymersDirect Study of Size Effect at Gel-Sol Preparation of Stabilized Zirconia in the ZrO2-Yb2O3 System with use of Synchrotronic IrradiationUrea-Formaldehyde as a Precursor for the Preparationof Alumina-Zirconia Composites by Sol-Gel Polymeric RouteUrea Formaldehyde as a Precursor for the Preparation of Titania by Sol Gel Polymeric RoutePZT-Piezoceramic Derived from Emulsion PowderSol-Gel Method used for Synthesis of Ceramic PigmentsPreparation of Bismuth Layered Oxide Powders by Chemical Routes: Molten Salts and Sol-Gel SynthesesHafnia and Hafnia-Zirconia Mixed Oxide Ultra Spherical Microspheres Made by a Sol-Gel-Vibrational Dropping ProcessAluminium Titanate-25vol% Mullite Composite Powder Obtained by Different Processing MethodsSynthesis and Sintering Behavior of Nanocrystalline ZrO2 - 3 mol% Y2O3 PowdersEpitaxial Zirconia Films on(11-20) Planes of SapphireEffect of Praseodymium Doping on the Properties of Ca-FSZ Obtained by Gel MethodsStudy of Synthesis Methods to Obtain the Ceramic Pigment Pink Coral, Fe-ZrSiO4Chemical Preparation of Pb(Zn1/3Nb2/3)O3 - Pb(Fe1/2Nb1/2)O3 Powders from Nitrate SolutionsAspects Regarding the Formation of the Spinel Phase in the MeO-Al2O3 and MeO-TiO2 SystemsEffect of seeding on a-Al2O3 Powder Formation from Bayerite and BohemiteSynthesis by Coprecipitation and Characterisation of Materials Obtained from the System NiO-Al2O3-SiO2Wet Chemical Preparation of Doped Barium Titanate Powders and CeramicsSolid Solution La2-xSrxNiO4 Preparation by the Citrate MethodA New Solution Way to Prepare Hydroxyapatite PowdersPowders Agglomeration Grade in the ZrO2-Y2O3 Coprecipitation ProcessPreparation Conditions and Sintering Ability of Ceramic PowdersHigh Stability Ceramic PigmentsStabilisation of Transition Aluminas by Alkaline Earth IonsPreparation and Characterization of Metastable ZrO2/Al2O3 Solid SolutionControlled Morphology of Nickel Manganite PowdersSpinel Pigments in the ZnO-CoO-Al2O3-Cr2O3 System Prepared from Organometallic PrecursorsHydrothermal and Activated Solid State Syntheses of SrTiO3 Fine PowdersMechanism of the Hydrothermal Crystallisation of ZirconiaHydrothermal Synthesis and Properties of BaTiO3 Powder Destined for PTCR CeramicsHydrothermal Synthesis of Colloidal ZirconiaCerium Stabilized Zirconia by Mixing Hydrothermally Synthesized Monoclinic Zirconia with Cerium NitrateSynthesis and Growth Mechanism of ThO2-W Nanocomposite PowderLaser Synthesis of Nanometric Si/C/O Powders from an Aerosol of HexamethyldisiloxaneCalorimetric Study of the Thermal Induced Transformations of Ultrafine Silicon Carbide Powder Produced by RF Glow DischargeReactions between SiCl4 and NH3 Leading to the Formation of Silicon Nitride PowdersNanosize Powders Prepared by Flame PyrolysisNovel Ceramic Matrix Nanocomposite Powders Containing Carbon NanotubesProduction of Nanosized Zirconia-Particles by CO2 Laser EvaporationAl2O3-SiC Nanocomposites Obtained through the Dispersion of Nonometric PowdersThe Influence of the Preparation Conditions of Nanocrystalline Zirconia on Powder Processing and Ceramic PropertiesProducing Al and Al2O3 Nanopowders by Electrical Explosion of WireTEM Studies of Nanometric Ceramic Oxide Powders Prepared by Ball-MillingInfluence of the Synthesis Route on the Characteristics of Zirconia NanomaterialsCeramics from Fine Plasma-Processed AlN PowderCharacterization of Oxycarbide Glasses Prepared by Melt SolidificationDirect Crystallization of BaTiO3 Glass CeramicsSynthesis of Spinel Powders by the Spray Pyroloysis MethodSynthesis and Characterization of Transition Metal Carbide WhiskersNi/Alumina Catalysts Produced by Combustion SynthesisCombustion Synthesis of Aluminium Titanate: Thermal StabilitySize Distribution of Ultrafine Spherical Ceramic Powders Obtained by Ultrasonic Spray PyrolysisPreparation of LaCrO3 Based Materials by Autoignitation of Citrate- Nitrate GelPreparation of Plasma Sprayable ?- Whitlockite PowderSynthesis of LiAlO2 and LiGaO2 by Ion Exchange ReactionSynthesis of Mullite Precursors in Molten Salts Influence of the Aluminium Source of SaltPoint Defects Effect on the Sintering of AluminaModification of the Surface Properties of a Titania Nanopowder by Grafting: A Fourier Transform Infrared AnalysisThe Ceramic Humidity Sensors on the Base of MgAL2O4On Peculiarities of Non-Isothermal Synthesis of fine Ferroelectric PowdersEffects of Heat Treatments on the Local Order in Si/C/N Nanopowders Studied by X-Ray Photoelectron SpectroscopyIdentification of Barium Carbonate in Barium Titanate powdersMethylene-Blue Adsorption on Latvian Clay PowdersStudy of Vaporization during Heat Treatment of ?-Spodumene and a-Cordierite Sol-Gel PowdersHRTEM and XRD Study of the Crystallization of Zirconia Precipitate: an Explanation of the Well Known ''Glow Effect''FT- IR Spectroscopy as a Method for the Study of the Different Crystallization Forms of CaCo3Improved Characterisation of Ceramic Powder Surfaces - A Comparison of Different FTIR-Spectroscopy MethodsStudy of Malayaite Synthesis CaSnSiO5Optimisation of Ceramic SuspensionsAqueous Silicon Nitride Suspension: Effect of Surface Treatment on the Rheological and Electrokinetic PropertiesDispersion, Stabilisation and Casting of Calcium Carbonate SuspensionsInfluence of Iso-Propyl Alcohol Addition on the Electrophoretic Deposition of SiC from a Mixture of Acetone and n-ButylamineZirconia-Toughened Alumina (ZTA) with Improved Homogeneity for Tribological ApplicationsThe Interaction of Barium Titanate with an Aqueous Suspending MediumThe Effect of pH on Barium Titanate Aqueous SuspensionsAqueous Suspensions of aAl2O3/SiC Mixed SystemsColloidal Processing of Alumina with MgO AdditionsESA Measurement of Electrokinetic Properties-Possibilities and LimitationsShear-Dependent Behaviour of Calcium Carbonate Aqueous SuspensionAqueous Processing of Carbothermally Prepared Ca-a-SiAlON and ?-SiAlON Powders: Powder and Suspension CharacterisationCharacterization of Alumina Suspension by ElectroacousticsCharacterisation of Organic Additives and their Adsorption Behaviour on Alumina Particle Surfaces using HPLCDevelopment of Ceramic Inks for Jet Printing: Effect of ConductivityCost Effective Reliable Silicon Nitride for High Performance Structural ApplicationsCorrelation Between Rheological Behaviour of Alumina Slips and Characteristics of Pressure Cast BodiesIndustrial Pressure Casting of High Alumina CeramicsDrying of Aqueous Ceramic SuspensionsInfluence of Magnesia on Drying-Shrinkage Behaviour of AluminaAqueous Tape-Casting of Silicon CarbideUtilisation of Alumina Green Tapes Obtained by Tape Casting of Aqueous Slurry for the Fabrication of Straight or Curved Thin Ceramic TubesCentrifugal Slip Casting of AluminaInfluence of Slip Viscosity on the Mechanical Properties of High Purity Alumina Made by GelcastingImprovement of Mechanical Properties of Green Powder Compacts by Using Novel Binder SystemConstant Pressure Filtration of Compressible Ceramic Powder CompactsThermal Resistance of Porous Alumina Ceramics Prepared from the Spray Pyrolyzed PowdersDry Compaction of Alumina Granules. Influence of the Binder System Glass Transition TemperatureThe Effect of Lubricants on Closure of Large Pores During Powder CompactionCompacting Mechanisms of a Multicomponent Atomized Ceramic PowderPrinciples of Pulsed Compaction of Ceramic Nano-Sized PowdersCharacterization of PZT Powder Prepared by Spray DryingThe Effect of Dispersion and Atomisation Conditions on the Compaction Response of Silicon Nitride GranulesMeasurement on the Effect of Absolute Pressure on the Extrusion Properties of Ceramic PastesMicrostructure Formation in Ceramic Injection MoldingThe Influence of Binder Properties on the Plasticity and the Properties of Raw Extruded CeramicsLamination of Ceramic Green TapesExtruded Aluminium Nitride-Manufacture, Properties and ApplicationA Novel Method for Preparing Porous Alumina ObjectsGreen Machining of AluminaEffect of Moulding Pressure on Pore StructureNear Net Shaping of Complex Components by Hot MouldingLow-Shrinkage Mullite Derived from Filled Polymeric SiloxanesThe Peel Adhesion Test for Metal-Ceramic InterfacesReliability of Ferrite Cores in Applications and Quality Control TestsOn the Hardness and Brittleness of CeramicsEffect of Grinding Parameters on the Strenght and Reliability of Al2O3Effect of Surface Grinding on the Reliability of AluminaThe Transition from Palmquist to Median-Radial Crack Systems Within WC-Co CermetsDirect Measurement of Friction Applicable to Hot Strength MeasurementsFracture Behaviour of Ceramic Foils in Uni- and Biaxial TensionA Simple Technique for Fracture Toughness Measurements Using Specimens with Very Thin NotchesDevelopment of a Bending-Test Device for Small SamplesCrack Branch Lengths and Fracture Feature Sizes in Biaxially Stressed Glass DiscsDynamic Fatigue of Glass-Bonded Alumina CeramicsStudy of R-Curve Behaviour in alumina by In Situ Observation of Stable Indentation Crack GrowthThe Non-Linear Mechanical Behaviour of High Performance RefractoriesMechanical Properties of the Ti3SiC2 - TiC MaterialSlow Crack Growth in 3Y-TZP under Static and Cyclic FatigueIncrease in Fracture Toughness of Monolithic Ceramics by a Partial Reduction TreatmentImprovement of the Mechanical Properties of Magnetic CeramicsThermomechanical Behaviour of TiB2-AlN CompositesMechanical and Microstructural Characterization of SiC Materials Hot-Pressed from a and ? PowdersFracture Characteristics of Abrasive ParticlesApplicability of LEFM to Coarse-Grained Ceramics and CompositesFabrication, Structure and Properties of In-Situ Reinforced Si3N4 Ceramics from Sol-Gel Derived Oxide-Additive-Coated PowdersBiaxial Fatigue of Sintered HydroxylapatiteTechnological Aspects at Development of 2.5 MW Stationary GTE Ceramic Components StructuresAnisotropic Deformation and Fracture of Indented PZTMicrostructure Development in Superplastic Silicon NitrideObservation of Different Interfaces in Silicon Nitride by HRTEM. Influence of the Microstructure on the Creep Properties.Shear Viscosity of an Oxynitride Glass InterlayerCompressive Deformation of Low-Doped Silicon Nitride Ceramics with Different MicrostructuresHigh Temperature Behaviour of a Zircon CeramicCompressive Deformation of Fine-Grained Al2O3 in a Reducing EnvironmentHigh Temperature Compression Tests Performed on Doped FuelsLong-Term (>30,000-40,000 h) Creep Behavior of an Advanced Si3N4 CeramicHigh Temperature Creep of Polycrystalline MulliteHigh Temperature Mechanical Properties and Creep Behaviour of Different MullitesThermomechanical Properties and Creep of Mullite from Rapidly Quenched PowdersEffect of Specimen Size on Thermal Shock Properties of an AluminaThermal Shock of Ceramic Material: Damage Resistance Parameters and Critical Flaw SizeQuantitative Approach of the Effective Coefficient of Heat Transfer During Quenching Vickers Indented Ceramic SamplesToughness and Thermal Shock Resistance of Melt-Textured YBaCuO Ceramic SuperconductorsStudy of the Relationship Between Microstucture, Fatigue and Thermal Shock Behaviour of Si3N4Thermo-Mechanical Behaviour of Structural Ceramics Submitted to Mild Thermal ShocksMesoscopic Modeling of the Intergranular Structure of Y2O3 Doped Aluminium Nitride and Application to the Prediction of the Effective Thermal ConductivityEffect of Particle Size on the Thermal Shock Behaviour of a Zirconia Refractory Partially Stabilised with MagnesiaThe Effect of Powder Processing Route on the Hydrothermal Degradation of Y-TZPLow Temperature Ageing of 3Y - TZP: Influence of the MicrostructureThermal Fatigue Behaviour of Controlled Surface Flaws in AluminaMicrostructural Damage in Hafnium Diboride Under Neutron IrradiationPhase Transformation of Gd4Al2O9 at High TemperatureMeasurement of Grain Boundary Sliding by Atomic Force Microscopy in Superplastically Deformed CeramicsInternal Friction Decrease in Silicon Nitride Due to Crystallization of Intergranular PhasesHigh Temperature Microplasticity of Fine-Grained Y-TZP Zirconia Studied by Mechanical Spectroscopy'Photothermal Characterisation of Microelectronics Ceramics at Various Scales'High Temperature Tensile Testing Apparatus for Industrial Ceramics CharacterizationShape Prediction Procedure for Die Pressed Ceramic compactsStructure Development During Linear Heating and Rate-Controlled Sintering of Ceramics: Statistical Model and ExperimentModelling of Binder Burnout Process for Ceramic CompactsModelling of Thermal Shock BehaviourFinite Element Modeling of Binder Removal from Ceramic MoldingsNumerical Simulation of Alumina FractureRheological Analysis of Stress-Strain Hysteresis in Silicon Nitride at High TemperatureExperimentally Verified Numerical Analysis of Internal Thermal Stresses in Alumina Ceramics with Grain Size EffectCreep Damage Model for CeramicsStress Distribution in Silicon Nitrice Joints with Metallic InterlayersComputational Modeling of Sintering Process in CeramicsModelling of Subcritical Crack Growth in MnZn FerritesGraphic Simulation of STM Images of Si(111)7X7 SurfaceConductive Mode Imaging for Grain Boundary Property Determination in ElectroceramicsAFM Investigation of Electrical Double Layers on SiO2 SurfacesQuantitative Determination of Density Gradients by Three-Dimensional Computertomography (3D-CT)Investigation of Hardness and Elastic Contants on Silicon Nitride Based Composites by Recording Micro Hardness TesterDense and Nanostructured Ceramics by Low-Temperature Pressureless Sintering of Nanosized Y-TZP PowdersSynthesis and Characterization of Alumina Matrix Nanocomposites Containing Carbon NanotubesMicrostructure and Mechanical Properties of Ti(C,N)-Mo2C-(Ni,Co) Cermets as a Function of their Initial Chemical CompositionOrigins and Avoidance of Colour Inhomogeneities in Silicon Nitride CeramicsOn the Valence States of Yb, Sm and Eu Ions in a-Sialon Based CeramicsSuperstructure of C3S PolymorphsStabilised Zirconium Dioxide in the MgO-CeO2-ZrO2 Ternary SystemFanning Laser Light Application to the Characterization of Bi12TiO20 and Bi12SiO20 CrystalsSolubility of Erbium, Praseodimium and Vanadium in ZrO2, ZrO2-CeO2 and ZrO2-Y2O3Decomposition of Nitrous Oxide over Perovskite Type Mixed OxidesTie-Lines to ?'-sialon in the Si-Al-O-N Phase DiagramProperties of Novel Ceramic Materials in the BaO-Al2O3-AlN-MgO System with a ?-Alumina Type StructureDiffusional Properties of Tic at High TemperaturesSubsolidus Equilibria in the Sn-Sb-Cu-O SystemStructural Characterisation of New Y-Si-Al-O-N Oxynitride Glass CeramicsThe Driving Force for a-? Transformation in Rare Earth a Sialon CeramicsNovel Calcium Phosphate/Polylactide Composites: Its In Vitro EvaluationMoSi2 Self-Purification Through High-Temperature SynthesisThermodynamics and Kinetics of Decomposition of Al2TiO5-Base CeramicsPreparation of Pure B-Phase Glass-Ceramic in the Yttrium SiAION SystemElaboration of Composites by Reactive Sintering of AIB2 and TiN PowdersStudy on the Sintering of Aluminium Titanate-Mullite by Using a Constant Heating RateLow-Thermal Expansion Zirconyl Phosphate CeramicReaction Kinetic in the ZrO2 - Li2O SystemEffect of Isomorphous Substitutions on Crystallization of Fluorrichterite GlassesComparison of Preparation Mechanism of Al2TiO5 during Various Heat Treatment TechniquesA Mechanism for Aluminium Powder NitridationSolid State Reactions in the Sb-Sn-Cu-O System Studied by IR SpectrometrySolid State Reactions in Al2TiO5-Al6Si2O13-Al2O3 Subsystem, Using Reactive PowdersEnamels Cristallographic Transformations Study by High Temperature X-Ray Diffraction: Application to Fast Firing in Fine Ceramic FieldThe High Temperature Transformation of PetaliteAluminium Oxycarbide Formation on Carbon-Coated Al2O3.MgO SpinelSolid State Reaction between Tantalum (Ta) and Tantalum Carbide (TaC) Powders during HipingMicrostructural Development during the Sintering of SepioliteSintering of ZrO2 - CeO2 - Y2O3 Alloys: Influence of Powder PreparationPreparation and Fabrication of Lithium Titanate CeramicsDensification of Diatomite and Microporous Structure Formation via Heat TreatmentMullite Synthesis from Sol-Gel MethodDensification and Grain Growth Kinetic for Silicon NitrideExperimental and Computational Study for Grain Growth in AlN Based CeramicsEffect of Slip Conditions on the Microstructure of Supported a-Alumina LayersPhase Transformation and Sintering of ?-Al2O3-Effects of Powder Characteristics and Dopants (Mg or Y)Sintering of Magnesia Doped Sol-Gel AluminaParameters Influencing the Preparation of Coarse Grained Al2O3 CeramicsOxidizing Sintering Behaviour of UO2+x-Lanthanide Oxide CompoundsPreparation of Translucent SnO2 Ceramics by Natural SinteringBaTiO3-Ceramics Structure and Consolidation ProcessIndium Oxide Ceramics with Titania AdditionsSintering Study of Hyperstoichiometric Powder Compacts of UO2+x-(6mol%)PuO2Sintering Conditions and Resulting Properties of Solid State Sintered Silicon CarbidePhase Evolution during the Nitridation of Silicon with a Clay AdditiveSynthesis and Characterization of Metal-Mg0.9Al2O4 and ZrO2-MgAl2O4 CompositesMicrostructure Development of Ni-YSZ Composite Materials Prepared by Gel-Precipitation MethodEffect of Y-PSZ Additive on the Structure, Thermal Behaviour and Mechanical Properties of ?-Spodumene CeramicSeeding for the Development of Unique MicrostructuresStudy of a Multilayer-Based Technique with Sintering Additives for Microstructuring of Single-Phase CeramicsDevelopment of Opacities Materials for Glazes CeramicsElaboration and Characterization of Submicronic SiC-TiB2 Composites by Reactive Pressureless SinteringOptimised Si3N4 Ceramics Containing Nitrogen Woehlerite as a Grain Boundary PhaseSintering and Microstructural Evolution of Si3N4-La2O3-Y2O3 System from Different Powder Processing MethodsHigh Temperature Stability of a-SiAlONs Containing Mixed CationsOptimization and Improvement of Sialon Ceramics with New Heat Treatment TechniquesThermal Stability of Rare Earth Densified a-Sialon CeramicsDensification of Mixed-Oxide Coated Silicon Nitride PowdersSi3N4/SiC(N) Nanocomposites Influence of SiC(N) Nanoprecipitates on the MicrostructureMicrostructure of Al2O3-SiC NanocompositesAl-AlN Composites Elaborated by Squeeze CastingFabrication of Various Nanocomposites Starting from Hydrothermal Powder MixturesNano-Inclusions Associated with ?-SiAlON Grains in a-? SiAlON MaterialsMaterials on the Basis of Finely Dispersed Si3N4 PowdersMicrowave-Sintering of TitaniaPhysicomechanical and Thermophysical Properties of High-Melting Compounds - Based Ceramics Sintered at High PressuresPressure-Assisted Sintering of High Purity Barium TitanateFrom the Powder to the Electro and/or Magnetic Ceramic Component: Fine Grain Size and PropertiesProperties of Hydrothermally Prepared FerroelectricaAnalysis of Motion of the Domain and Phase Boundaries in the Process of Polarization and Polarization Reversal in Low-Coercive CTS-Based Ferroelectric CeramicsElectromechanical Interactions and Physical Properties of Perovskite-Type Ferroelectric CeramicsPecularities of the Domain Structure of the Perovskite-Type Ceramic Ferroelectric MaterialsDielectric Anomaly of (Sr1-xBi2x/3)TiO3 Ceramic in the Temperature Range of 300-550KThe Ferroelectric and Frequent Characteristics of BaTiO3-Ceramics with AdditivesThe Fractals and BaTiO3-Ceramics StructureNew Experimental Evidence of Relaxor FerroelectricsModified PbSc1/2Nb1/2O3 Ferroelectric CeramicsHigh Electromechanical Coupling in Relaxor Pb(Sc1/2Nb1/2) O3 - PbTiO3 System Hot-Pressed Piezoelectric CeramicsThe Role of PbO on the Sintering Behavior and Microstructural Development of Pb(Mg1/3Nb2/3)O3 based RelaxorsDielectric Properties and Ordering Behavior of Pb(Fe2/3W1/3)O3 Ceramics with Na and La SubstitutionsDielectric Dispersion and Slow Relaxation Process in Modified PbTiO3 Ferroelectric CeramicsPiezoelectricity in PbTiO3 - Based Ferroelectric Ceramics: a ReviewThe Connection Processing - Structure - Electrical Properties in Ceramics PbTiO3Phase State and Structure of Ferroelectric Ceramics under IrradiationObservations of Cracking in Bulk PLZT CeramicsSwitching Kinetics in Thick Film and Bulk PLZT CeramicsAnelastic Behavior of Piezoelectric PZT CeramicsEffect of Poling and Poling Reversal on the Piezoelctric Properties of PZT Type CeramicsThe Influence of Excess Lead Oxide on the Piezoelectric Properties of NbLi Doped PZT Type MaterialsPyroelectric Detectors from RF sputtered PZT Type MaterialsPreparation of PLZT Materials Using Powders from Aqueous CoprecipitationMicrostructure of 90? Domains in Ferroelectric Materials studied by XRDPhase Coexistence at MPB in PZT Thin Films prepared by Sol-Gel ProcessingSrBi2Nb2O9 Ferroelectric Thin Films prepared by Sol-Gel Spin-CoatingProduction of Dense Lead Zirconate Titanate (PZT) FilmsLiNbO3 Thin Films prepared from a Polymeric Precursor MethodSAW Materials and Devices Characterization of High Resolution and AccuracyFabrication Processes of Magnetic and Dielectric Multilayer CeramicsGrain Boundary Structures in Electronic CeramicsValence States of MgO, AI2O3 and Metal-Oxide InterfacesCeramic Micropackages Realised through the Technology. Specific to Electronic ComponentsEffect of NiO on the Sintering Behaviour of BaTiO3Dielectric Properties of NiO-Doped BaTiO3 sintered with different Oxygen Partial PressureEvolution of Hysteresis Loops with Temperature Studied on Dielectric Ceramics Based on Tetragonal Tungsten Bronze StructureDoping Elements Influence on Microstructural and Dielectric Properties of Alpha AluminaFormation and Characteristics of some Cerium-Doped Ba(Ti,Sn)O3 Solid SolutionsDielectric Properties in Ce doped BaTiO3 Solid SolutionsMW Ceramic Dielectrics Based on the System BaO-(Nd,Sm)2O3-TiO2Polarization Mechanism of Thermostable Microwave CeramicsEffect of the Grinding Process on Different Characteristics of (Zr,Sn)TiO4 Microwave Dielectric CeramicsDielectric Ceramics Derived from Barium-Tetratitanate Based Solid SolutionsThe Formation and Composition of Compounds in the Ba- Rich Region of the BaO-M2O3-TiO2 Ternary System (M=Y and Nd)The Influence of Isovalent Doping on the Microwave Dielectric Properties of Ba6-xNd8+2/3xTi18O54 Based CeramicsIntroduction of Oxyanions into Copper Oxides: A Route for the Generation of New High TC SuperconductorsRelationship between the Microstructure and the Properties of Undoped and Pb-Doped Hg-1223 SuperconductorsTransport Current in Highly Textured Bulk (Bi,Pb)-2223 CeramicsThe Influence of Synthesis Environment on Magnetic Properties and Phase Content in BSCCO Superconducting Ceramic Obtained by Spray-Frozen, Freeze Drying TechniqueThe Influence of Synthesis Environment and Time on Volumetric Characteristics of BSCCO Superconducting Ceramic Obtained by Spray-Frozen, Freeze Drying TechniqueGlass and Glass-Ceramic Obtained in the Doped Bi-Sr-Ca-Cu-O System. Early Stage of CrystallizationCalculation of Oxalate Coprecipitation Conditions for the Synthesis of Superconducting CompoundsSynthesis of Hg-Based Superconductors by Hot-Isostatic PressingNew Technology to Improve Texturing and Transport Current in Bulk (2223) BSCCO SuperconductorsSuperconductor BSCCO Thin Films Obtained by RF SputteringBi-Based Superconductors Obtained by Oxalate Coprecipitation, Containing FeSynthesis and Raman Characterization of Hg1-xPbxBa2-ySryCa2Cu3Oz SuperconductorsSynthesis and Crystalline Structure of In2Ba4Cu6OxGrowth of NdBa2Cu3O7-d Single Crystals by a Horizontal-Bridgman Like MethodMicroscopic Studies of YBCO-Based Polycrystalline MaterialsHeteropolynuclear Complex Precursors Used in M(III)M(II)2Cu3O7-d Mixed Oxides Synthesis (M(III)=La, Ce, Y; M(II)=Sr, Ba)Investigation of YBa2Cu3O7-d/Y2BaCuO5 and EuBa2Cu3O7-d/Eu2BaCuO5 CompositesMorphology and Composition of YBaCuO Targets after Laser Ablation for the Growth of Thin FilmsRaman Study of Compositionally Induced Phase Transitions in Nd1+xBa2-xCu3Oz Solid SolutionsGrain Resistivity and Grain Size in Non-Ohmic Oxide CeramicsA.c. Thermally Assisted Tunnel Transport in Zinc Oxide Non-Ohmic CeramicsPercolation and Conduction of Disordered Ceramic Material with Integranular BarriesDensification, Microstructure and Voltage/Current Characteristics of Bi-Mn-Doped ZnO Ceramics Sintered at Low TemperatureThe Effect of Variations in Sintering Temperature on the Structure of Electrically Active Interfaces in Zinc Oxide VaristorsInvestigation of Electronic Processes at the Grain Boundaries of a Multilayer VaristorThermodynamic and Experimental Investigation of the Effect of Rare-Earth Ions (Ln3+) Nature on the Posistor Properties of (Ba1-XLnX3+) TiO3Electrode Influence on Transient Thermal Gradients in BaTiO3 PTC ThermistorsSintering Behavior and Electrical Properties of Pure and Doped Barium Titanate Powders Produced by Hydrothermal SynthesisInvestigation of the Microscopical Origin of the PTCR Anomaly in Two Phase Zn-Ni-O CeramicsPreparation of BaTiO3 PTCR Ceramics by Low Temperature Liquid Phase SinteringNickel Baryum Manganites: An Interesting System for NTC ThermistorsThe Formation of Grain Boundary Potential Barriers in Semiconducting (Sr,Ca)(Ti,Nb)O3 CeramicsSurface Characterisation of a Tin Oxide Nanosized Powder by FT-IR Spectrometry in Relation with the Semiconducting PropertiesInvestigation of Electrical Behaviour of LaNi0.6Co0.4O3 on Perovskite NTC-CeramicsComparison of Different Methods for Applying La-Ni-Co Oxide Films on PTCR CeramicsThermogravimetric and Electrical Characterisation of a Tantalum Pentoxide Doped Ceria-Zirconia Solid SolutionEffect of the Low Temperature Synthesis on the (La1-xSrx)MnO3?d SystemHeteropolynuclear Complex Compounds as Precursors of LaCrO3Preparation of Anode Composite Materials for Solid Oxide Fuel Cells by Using Some Alternative Nickel PrecursorsStructure and Properties of Acceptor Intercalated Graphite FibresA Structural Study of Tin-Doped Indium Oxide (ITO) Ceramics Using 119Sn M?ssbauer Spectroscopy and Neutron DiffractionChemistry and Microstructure of the Interface between Lanthanum Manganite and Cubic Stabilized ZirconiaPerformance of Mixed Conducting Electrochemical Filters for YSZ Oxygen SensorsProperties of Composite (CaF2+SiO2) Solid ElectrolytesThe Preparation of CdTe Particles in Silica Glasses by a Sol-Gel MethodApplication of NR to Study the Lithium Ion Transfer in Solid Ionic ConductorsNonstoichiometry and Electrical Properties of the Perovskite Ca2Fe1.4Nb0.6O?Barium Hexaferrite as Permanent-Magnetic Material in Microsystems TechnologySynthesis of Single Crystals of Hard Ferrite in the Presence of FluxPreparation of Nd-Fe-B Magnetic Films by Ceramic TechniquesGiant Magnetoresistance in La1-xCaxMnO3 Ceramics and Thin FilmsDeposition of Magnetoresistive La1-xCaxMnO3 Thin Films by Aerosol-Assisted MOCVDMagnetic Behaviour of Submicronic Acicular Composite ParticlesMicrowave Behaviour in Z Type Polycristalline HexaferritesNew Ceramics for the Information Storage: Nanoparticles of Titanium Ferrites. Influence of Oxidation and Reduction Reactions upon the CoercivityMaking Soft Past in the XVIII CenturyIon-Beam Archaeometry of Islamic Lustre GlazesForms and Fabrics of the Terracotta Industry in Southern Etruria in the Third and Second Centuries B.C.Characterisation of Mosaic 'Glazes' from the 'S. Giusto' Basilica (Puglia, Italy)Ceramics of CucuteniMedieval Ceramics From Piua Petrii Archaelogical SiteRe-Evaluating Late Nineteenth Century Creative Innovations in the Silicate Industry: The Zsolnay Ceramics Works of P?cs, HungaryCeramic's Technics and Technology of Bernard PalissyExcavated Iznik Kilns and Characterization Studies of the Kiln FurnitureArchaeological Ceramic Glazes Characterization by Laser Ablation - Inductively Coupled Plasma - Mass Spectrometry (LA-ICP-MS)Apport de la Cathodoluminescence ? l'Etude des Transformations de Phases Cristallines dans des C?ramiques Kaolinitiques Carbonat?esEtudes en Laboratoire des C?ramiques de Type Vassiliki en Cr?te OrientaleByzantium and the Crusaders: Ceramic ConsiderationsLate La T?ne Figurative Painted Pottery: Diffusion of a Product or a Concept?Galloroman Terra Sigillata Imitations of Western Switzerland: Technology and ProvenanceThe Scientific Investigation of Bricks from St. Urban (13th Century Cistercian Monastery, Lucerne, Switzerland)Cathodoluminescence Analysis: A Tool for Ceramic Differentiation?X-Ray Fluorescence Analysis of French Modern Fa?ences (XVI-XIX AD): First ResultsHigh-Lead Glazes Compositions and Alterations: Example of Byzantine TilesCharacterisation of the Renaissance Polychrome Italian Terracotta Sculptures of the Louvre MuseumCharacterization and Alterations of Hispano-Moresque Tiles of 14th CenturyCeramics of the Crusader Period found in Acre: An INAA and ICP Study of the Local Productions and of Some Imports from the Byzantine WorldEffect of Surface Residual Stresses on Surface Crack Behaviour and Wear of Y-TZPOxidation Behaviors of PVD TiAlN FilmsProperties of Electrospark Coatings on Titanium AlloyCoefficient of Friction between Yarns and Ceramic Parts for Textile Applications'The Effect of Microstructure Modifications on the Mechanical Behaviour of Alumina Based Ceramics for Wear Applications'Composite Sol-Gel Ceramic CoatingsThe Wet Erosive Wear of Polycrystalline Alumina with Silicon Carbide Particulate InclusionsFactors Affecting the Wet Erosive Wear of Liquid Sintered AluminasSliding Wear Damage in Polycrystalline Alumina MicrostructuresBioactive Coatings Based on HydroxyapatiteInfluence of Silicon Surface Preparation and Orientation on Diamond Nucleation and Growth in CH4/H2 System DischargeSIMS Study of Amorphous Carbon Films Deposited on Silicon and TA6V SubstratesPH Influence on the Properties of Mullite CoatingsImprovement of Tribological Properties of Plasma Sprayed Ceramic Coatings Based on the Alumina Titania SystemPlasma Generation over Liquid Surfaces and its Application to Ceramic Synthesis - Diamond and Alumina -Influence of Substrate Preheating on the Adhesion and the Development of Residual Stresses in Plasma Sprayed Ceramic CoatingsIn Situ Study of Chemical Reactions during Growth of TiN Layer from Gas PhaseSelection of Materials for Use at Temperatures above 1500?C in Oxidizing AtmospheresCorrosion of Ceramics in Halogen-Containing AtmospheresHigh Temperature Corrosion of a Porous Si2N2O-ZrO2 Composite MaterialOxidation Behaviour of Yttrium and Rare-Earth Doped a-Sialon Ceramics at 1350?CThe Oxidation Kinetics of a Yttria-Doped Hot-Pressed Silicon NitrideNovel Approaches to Determining Oxidation Phenomena in Non-Oxide CeramicsCorrosion of Si-Based Non-Oxide Ceramics by Molten Na2SO4Bubble Formation in the System Si-O-NDegradation of Dense Silicon Nitride in a High Temperature Combustion EnvironmentAIN-Based Ceramics - an Alternative to Si3N4 and SiC in High-Temperature Applications?Elaboration and Caracterisation of Alumina Platelet Reinforced Molybdenum DisilicideOxidation of New Ceramics Based on Ti3SiC2High Oxidation Resistance of Hot Pressed Silicon Nitride Containing Yttria and LanthaniaThe Effect of Intergranular Phase Crystallinity on the Oxidation Rates of a Silicon NitrideA Comparison of the Oxidation Behaviour of As-Sintered and Machined Si3N4High-Temperature Oxidation of AIN-SiC CeramicsHigh-Temperature Oxidation of AIN-ZrB2 CeramicsMullite Based Oxidation Protection for SiC-C/C Composites in Air at Temperatures up to 1900 KHigh Temperature Corrosion between SiC and FeCrAl Alloy for Gas Burner ApplicationEnvironmental Resistance of Ceramic Matrix Composite Materials for Gas Turbine ApplicationsOxidation Protection Coatings for C/SiC Based on Y2SiO5Fuel Composition Effects on Burner Rig Corrosion of a Silicon Carbide Exposed at 1000?C and 1300?CTesting of Si2ON2-Ceramics Made from Microsilica and Si3N4 PowderCorrosion of MgO and MgAl2O4 by Aluminium AlloysReactivity between Two Liquid Nickel-Base Superalloys with SiO2 CeramicsMoisture Expansion Phenomenon as a Specific Form of Brick Product CorrosionSurface Roofing Tile Scaling due to the Moisture Expansion PhenomenonSlagging Effects of Carbon Fly Ashes on Magnesite-Chrom RefractoriesCorrosion Effects of Glass on YSZ ElectrolytesCorrosion of Zirconia Ceramics in Acidic Solutions at High Pressures and TemperaturesPreparation of Multi-Layer Washcoats for Automobile Catalyst via Chemical MethodsImportance of Electrostatic Interactions for the Selectivity of Micro and Mesoporous Ceramic MembranesShaping of a RBAO-Membrane SupportFabrication and Microstructure of the Ru Doped TiO2 Composite Membranes with Fine poresTape Casting of Diatomite for Filtration ApplicationsPorous Reaction Bounded Alumina: Machining and Joining PropertiesCharacterization of Multilayer Ceramic Membranes with the Atomic Force MicroscopeSteric Stabilization of Mixed Sol-Powder SuspensionsDeveloping of Ceramic Membranes for NanofiltrationMgAl2O4 Spinel as Material for Ultrafiltration MembranesCentrifugal Forming of Pore-Gradient MembranesAn Investigation of Microstructure and Porosity of Silicon Carbide MaterialsDevelopment of Open-Pore Silicon Carbide FoamsPreparation and Characterization of Microporous TiO2-MembranesInfluence of Viscoelastic Characteristics of the Colloidal Suspension on the Formation of SnO2 Supported MembranesSurface Energy Components and Contact Angle of Pure and Yttria-Doped Zirconia MembranesEffect of Difffusion Processes Occuring during Active Brazing of Alumina Ceramics-FeNi42 Alloy Joints upon the Properties of the JointsThe Joining of SiC3N4 Using Al and Ni Interlayers: Microstructure and MechanicsPreparation of Structured Ceramics for MembranesMicrostructural Evolution of SiC/Metal Interfaces at Elevated TemperaturesAl2O3-Supported Zeolite MembranesTiO2 Membrane Obtained by Sol-Gel Method Deposited on Al2O3 SupportsAlternative Way of Producing Porous Silicon Nitride Ceramics for Membrane ApplicationMechanical Properties of Model Magnesia-Spinel Composite MaterialsThermal Shock of Ceramic Material: Comparison of Resistance Parameter with the Critical ?T Values ?Tc=?Tc(Bi) of Ceramic MaterialsPhase Transformations in the Ternary Systems HfO2(ZrO2)-y2O3-Eu2O3Development of High Alumina Sintered Block as an Alternate to Fusion Cast Blocks for Solid Hearth of Pusher Type Reheating-FurnaceThermomechanical Bahavior of Refractory Castables under Compressive StressesSialon Bonded Alumina Refractories for Iron and Steel IndustryMullitization of Andalusite in Refractory BricksInfluence of Ceramic Bond on the Physico-Mechanical Properties of Carborundum RefractoriesMullite Refractory Castables with Low and Ultra-Low Cement ContentMicrostructure Created for Highering the Thermal Shock ResistancePreparation and Properties of Spinel Rich of Magnesium and AluminiumVolume Stability of Spinel-Bonded Magnesia CastablesStrength-Composition-Microstructure Relationships in Silicon Nitride Bonded Silicon Carbide Refractory MaterialsAlumina Refractory Masses Hardened at Normal Temperatures by CoagulationCeramic Materials in the System ZrO2-TiO2-Al2O3 for Applications in the Ferrous and Non Ferrous MetallurgyPhase Transitions during the Dehydration Reaction of Hydrous ZirconiaFusion Cast Refractories NAZS: Influence of the Nay2O Content on Both the Phasal Composition and the MicrostructureHigh Temperature Elasticity of MgO/C RefractoriesOptimisation of Raw Material Mixture Composition and Processing Variables of Blended Portland CementSelection of Industrial Refractories for Core Catcher ApplicationPhysico-Chemical Study of Reactions between a Magnesia-Graphite Refractory and Liquid SteelHeat Treatments of Calcium Aluminate Cements: Changes in Structure and Mechanical PropertiesFormulation of Zircon Refractory Using Silicic Residue from a Geothermal Power Plant as Intergranular CementPorous Interfaces as Crack Deflecting Interlayers in Ceramic LaminatesC-Fibre Reinforced Composites with Polymer-Derived Matrix: Microstructure, Thermal Properties, StrengthProbabilistic-Statistical Approach to the Mechanical Behavior and Failure of Ceramic Matrix Composites (CMCs)Development of Non-Oxide Ceramic Matrix Composites Based on Reactive Infiltration and In Situ Growth of AIN Bonding PhaseNon-Oxide CMC Formation by Reactive Melt InfiltrationThe Deflection of Cracks at InterfacesSiC (Nicalon NLM 202)/SiC Microcomposites with a Highly Crystallized BN InterphaseInterfacial Properties of Multilayered Interphases in SiC/SiC CVI-Composites with Weak and Strengthened InterfacesNicalon SiC Fibre Reinforced Pre-Prepared ?-Sialon CompositesConductive SiC-Fibre Reinforced Composites as a Model of Smart ComponentsMechanical Stiffening of Ceramic Matrix Composites Induced by Cyclic FatigueAssessment of the Static Fatigue Behaviour of the SiC Fibre-Reinforced Lithium Magnesium Aluminosilicate Glass-Ceramic Matrix Composite Tested under Uniaxiale Tensile LoadingMicrostructure and Creep of Cf-SiC Composites2D SiCf-MLAS Tensile Creep TestsEstimation of the Bundle Bridging Stress in 2D SiC-SiC Composite MaterialsIn-Situ Mechanical Characterisation and Interfacial Behaviour in Hi-Nicalon/BN/a-Si3N4 Ceramic Matrix CompositesApplications of Continuous Fibre Reinforced Ceramic Composites in Military Turbojet EnginesMechanical Behavior of Fibrous Ceramic Matrix Composites under Constant Tensile Load. Influence of Fibre-Matrix Interface PropertiesEnhancement of the Oxidation Resistance of Carbon Fibres in C/C Composites via Surface TreatmentsStress, Strain and Elastic Modulus Behaviour of SiC-Fiber/SiC Composites during Creep and Cyclic Fatigue TestsMullite Long Fibres Prepared by Sol-Gel Method Using Water Solvent SystemsSiC-Based Ceramic Fibres: Thermal Stability and Oxidation BehaviourMass Spectrometric Study of Retarded Vaporization of Silicon Based Fibres: Origin of their Thermal StabilityCrystallization of Polymer Derived Silicon Carbide FibersThe Properties of Fibrous PreformsApplication Potential of Fiber Reinforced CeramicsNanocomposites Si3N4/SiCN: Influence of SiC Nanoprecipitates on the Creep BehaviourLow Temperature Sintering and High Reliability PZT-Based NanocompositeLong-Term Behaviour of SiC/Si3N4-Nanocomposites at 1400-1500? CNear Net Shape Manufacturing of Polymer Derived CeramicsNovel Polymer Derived Ceramic Hard MaterialsColloidal Processing and Sintering Behaviour of Silicon Nitride Composites with Nanosized AluminaStructural Development and Properties of Si3N4-SiC Composites from Amorphous Si-C-N Powder PrecursorsProperties of Cordierite-Silicon Carbide NanocompositesFabrication and Characteristics of Alumina-Silicon Carbide NanocompositesMicrostructure Evaluation of Polymer-Derived Si-C-N-Ceramics Characterised by Scanning- and Transmission Electron MicroscopyMicrostructure and Mechanical Properties of Oxide Based Nanocomposites Fabricated by Spark Plasma SinteringElectrophoretic Forming of Laminated Ceramic Composite TubesLaminar Si3N4-TiN Hot-Pressed Ceramic CompositesOxide Laminates with Tough Interfaces?-Rhenanite (?-NaCaPO4) as Weak Inerface for Hydroxyapatite CeramicsPreparation and Cytocompatibility of TCP-TiO2 BiocompositesPreparation of TiO2 Bioceramics with a TCP Rich SurfaceSpace Group Determination of Hydroxyapatite and Carbonate ApatiteComposite Materials on the Base of ALN-AL2O3 with a Metallic BinderDevelopment of Tin-Aln Ceramics and Investigations of their Physicomechanical PropertiesManufacture and Properties of Al2O3-TiN Particulate CompositesTiN Coating of Alumina Platelets and Mullite Fibres Using a Precipitated TiCl4.4NH3 Precursor for Incorporation into Ceramic Metal CompositesThe Fabrication of Sintered Reaction-Bonded Silicon Nitride with ?-Si3N4 Seed CrystalFracture Behaviors of Al2O3SiC Composites Containing Various Sizes and Fraction of Fine SiC ParticlesZrO2-Tix CompositesDissolution of Si3N4-Al2O3(pl) Composite Tool Materials in Carbon SteelsZirconia Matrix Composites with Chromium Carbide and Chromium Oxide InclusionsToughening Mechanisms in the TZP - WC Particulate CompositesMoSi2/Al2O3 Composites Processed by S.H.S.: Preparation Conditions and MicrostructureElaboration and Mechanical Characterisation of a Metal Matrix Composite: NiAl-SiCp and NiAl-ZrO2pInfluence of ZTA Content on the Compressive Deformation in the Al2O3-ZrO2(12mol% CeO2) SystemModification of Microstructure of Porous Ceramics Using CVD MethodDevelopment of Ceramic Components for Gas Turbine ApplicationDetermining Appropriate Slip Resistance CharacteristicsStandardization: The Case of Implantable CeramicsCritical Review of PEI Method-Wet Abrasion TestCEN/VAMAS Study of Phase Volume Fraction Measurement - A Preliminary Review of ResultsThe New ASTM Fracture Toughness of Advanced Ceramics StandardInfluence on Tiles Final Quality of Oxygen Partial Pressure on the Firing ProcessOptimisation of Industrial Ceramic DryersIntegration of Different Clay Parts into A Multi-Component Pottery ProductConcentrates of Egyptian Nepheline Syenite Ring Complexes as a Source of Flux in Ceramic RecipesGlass Ceramics from Modified Sanovita (Timis) BasaltThe Thermal Expansion, Shrinkage and Formation of Crystalline Phases in Early Dense Fired Hydromica Containing Ceramic BodyBulk Crystallized Glazes in Quaternary System Na2O-CaO-MgO-SiO2Ceramic Pigments Obtained with Chromium as Unique ChromophoreSpectral Analysis of Ceramic Glazes from Industrial MineralsThe Effect of Phlogopite Mica on the Sintering Point and Colour of a ClaybodyMagnesium Hydrosilicate Kerolite - Potential Raw Material for Obtaining Cordierite CeramicsParticle Size Distribution - Mechanical Properties Relationship of Brick ClaysThermal Analysis and Mechanical Properties of Brick ClaysBorate Raw Materials for the Ceramic Frit IndustryMoisture Expansion in Ceramic Building MaterialsGlass and Glass-Ceramic Binders for Abrasive Grains of Fused and Sintered Alumina Type SG into Abrasive ToolsThe Characterization of Raw MaterialsInfluences of a CaCo3 Sintering Additive on the Physical and Mechanical Properties of Clay-Based CeramicsDevelopment of a 3D X Ray Cone Beam Tomograph for the Inspection of Ceramic Turbine WheelsWhat, How, and Why Soft and Solution Processing for Advanced Inorganic MaterialsAn Overview of Ceramics Recycling in FranceRetention Capacity of the Calcium Silicates Hydrates (CSH) for CaesiumUse of Spray-Dried Natural Clay in Water FiltrationStructure and Crystallization Study of Iron Phosphate GlassesChemical Corrosion Phenomena of Clay Roofing TilesVitrified Glass-Ceramic Product Development from Industrial WastesWater Cleaning Effect of Silica-Alumina Sintered SpheresGlass-Ceramics with Multibarrier Structure Obtained from Industrial WasteStudy of Caesium Adsorption on Hydrated Calcium-Silicate-Aluminate SystemsEnvironmental Optimization of Green Victoria Ceramic Pigment by Sol-Gel MethodsMorphology of Altered Layers of GlassesSimulation of Fluoride Emission in Traditional Ceramic Firing ProcessesFluoride Emission from Clay MaterialsRecycled Ceramic Waste for the Electro-Insulators Jointing Mixture and for Other Building MaterialsSiliconcarbonitride - Materials from Modified Recycling ProductsFabrication of the Hardened Bodies from FlyashThe Foaming of Waste GlassRecycling of Windshield Glasses in Fired Bricks IndustryBricks by Recycling - Product Design Based on WasteSelf-Propagating Reactions for Treating and Recycling Zinc Hydrometallurgical WastesCeramic Building Materials: An Alternative in Disposal of Sewage SludgeSinterization of Doping Mullite with Rare Earths Using a Silica Rich Residue from a Geothermal Power Plant