Design and Development of Sustainable Manufacturing Systems

Effect of Incubation Temperature on Growth of Acetobacter xylinum 0416 and Bacterial Cellulose ProductionThermal Properties of Low Density Polyethylene/Jackfruit Seed Flour Blends-Effect of Hexanedioic AcidCrystallinity and Influence of Citric Acid as a Compatibilizer in Low Density Polyethylene/Jackfruit Seed Flour BlendsProperties of Ethylene Propylene Diene Monomer/Recycled Acrylonitrile ? Butadiene Rubber Blends (EPDM/rNBR): Effect of the Addition of Bamboo FillersThe Effects on the Cure Characteristics and Physical Properties of Bamboo Activated Carbon Filled Styrene Butadiene Rubber (SBR) CompoundsPerformance of Concrete by Using Palm Oil Fuel Ash (POFA) as a Cement Replacement MaterialMechanical and Thermal Properties of Polylactic Acid Filled Rice StrawThe Addition of Imperatacylindrica as Natural Filler in Epoxidized Natural Rubber Filled Recycled Nitrile Glove: Cure Characteristics and Physical PropertiesCure Characteristics and Physical Properties of Imperatacylindrica Activated Carbon Filled SMR L CompoundingBehaviour of Axially Loaded Composite Wall Panel by Using Finite Element AnalysisEffect of Recycled Nitrile Glove (rNBRg) Particle Sizes on Curing Characteristics and Physical Properties of Natural Rubber/Styrene Butadiene Rubber/Recycled Nitrile Glove (NR/SBR/rNBRg) BlendsThe Effects of Trans-Polyoctylene Rubber (TOR) on the Properties of Acrylonitrile Butadiene Rubber/Recycled Natural Latex Gloves (NBR/NRL-G) CompoundsPhysical and Mechanical Behaviors of SnCu-Based Lead-Free Solder Alloys with an Addition of AluminiumThe Properties of Linear Low Density Polyethylene/Cyperus Odoratus (LLDPE/CY) Blends: Effect of Sodium HydroxideCompression Characterization of Polyurethane Foams with Different Formulations of Polyol and MDIEffect of Heat Treatment on Hardness Behavior of AZ91 and AZ91 Reinforced Carbon NanotubeProperties of Cement-Based Material Consisting Shredded Rubber as Drainage MaterialStudy of Covalent/Ionic Cross-Linked Modification on Physical and Mechanical Properties of Chitosan Film as Potential Material in Medical ApplicationThe Effects of Composition on Solid State Sintering of Tungsten-Brass CompositesEffect of Poly(Methyl Methacrylate) (PMMA) on Tensile Properties and Spectroscopy Infrared (FTIR) Characteristics of LDPE/WHF CompositesEffect of Alkali Treatment Using Calcium Hydroxide and the Fiber Length on the Strength of Sugarcane Bagasse Fibers-Polypropylene CompositesMechanical Properties of Short Fiber and Non-Woven Kenaf Reinforced Polypropylene Composites: Effects of Oil Palm Shell Powder AdditionSuperhydrophobicity of Textured Ceramic Coating for Corrosion Protection in Marine Applications ? A Brief ReviewStudy on the Effect of Porous Silicon Sizes for Potential Visible PhotodetectorX-Ray Diffraction and Dielectric Constant of Lanthanum Doped Barium Titanate CeramicsMulti-Layer Microstructure of Sol-Gel Barium Titanate Thin Films for Optical Waveguide ApplicationsHigh Throughput Graphene Oxide in Modified Hummers Method and Annealing Effect on Different Deposition MethodA Study of Fire Retardant Effect in Natural Fiber Composite Panels with Magnesium Hydroxide and Zinc Borate as AdditivesRapid Indicators in Detecting Variation of Fly Ash for Making HVFA ConcreteA Preliminary Study on Cracking Tendency of Cement Paste Incorporating High Calcium Fly AshReview on the Effect of Bottom Ash in Performance of Portland Cement MortarFlood Mud as Geopolymer Precursor Materials: Effect of Flood Mud/Alkaline Activator and Na2SiO3/NaOH Ratios on Compressive StrengthFlood Mud as Geopolymer Precursor Materials: Effect of Curing Regime on Compressive StrengthThermally Stable Encapsulation Material Based on Green and Red Lanthanide Phosphor for White Light Emitting DiodesStudy on Dielectric and Magnetic Properties of MWCNTs/Polyester CompositesEvaluation of Thermal Properties of the Fe80Cr20 Nanostructure for Interconnect Application in High TemperatureElectromagnetic Wave Attenuation in Lossy DielectricThe Effect of Different Remazol Dye Concentrations and Soaking Times in Dye-Sensitized Solar CellAligned Carbon Nanofibres (CNFs) at the Graphene/Nickel Thin Film EdgeThe Effect of Different Reduction Methods on Conductivity of Reduced-Graphene Oxide (r-GO)Correlation of Impact Energy from Instrumented Charpy ImpactRadiation Enhancement Using Circular Split Ring Meta-Surface Mirror for a Small Patch ResonatorKeystroke Dynamics for Construction Industry: A Review on Biometric Systems3D Stress Analysis of ITER Tokamak AssemblyCircular Split Ring Meta-Surfaces Variation Study as Surface Wave SuppressorOverview of Artificial Fish Swarm Algorithm and its Applications in Industrial ProblemsThe Development and Implementation Lean Manufacturing in Indonesian Furniture IndustryOverview of Fuzzy Logic Technique for Modeling Machining ProcessOptimization of Surface Roughness in Turning Operation Using Firefly AlgorithmGreen Aircraft Technology Imperatives for Environmental SustainabilityPressure Generated from Head Garment with Padding Insert Used for Hypertrophic Scar TreatmentBuffer Allocation Using 6 Steps Oba Method: A Case StudySimulation and Experimental Studies on Optimum Barrel Length for High Impact PenetratorDesign Specification Determination with Collaborative Approach for Indonesian Short Wheelbase Recumbent BicycleThe Satisfaction Preferences Measurement of Profile DesignMathematical Modelling of Surface Roughness on Tropical Wood Machining Using Response Surface MethodologyDesigning a Low Cost Endoskeletal below Knee Prostheses with the Implementation of Appropriate TechnologyMismatch Analysis of Elementary School Desk and Chair Using Monte Carlo SimulationA Study of Tool Motion in 2 Dimensional Ultrasonic Assisted Micro-MillingMega Floats: Floating Offshore Remote Terminal (FORT) towards Sustainability Life Cycle AssessmentDigital All-Pass Filter Modeling Based on Desired Group Delay Using Advanced Material: A Review on the Signal Processing PartFiber Length Optimization of Ring Cavity Multi-Wavelength Brillouin Fiber Laser Utilizing Fiber Bragg GratingComparative Characteristics between L-Band EDFA, L-Band EDFA Utilising Single FBG and Dual Stage L-Band EDFA Utilising Dual FBG ConfigurationsAll-Optical XOR Logic Gates: Insights and ComparisonsEnergy Saving Switched-Mode Regulator in Motorcycle Power SupplyDesign and Analysis on Symmetric MEMS InductorExtrinsic and Intrinsic Modeling of InGaAs/InAlAs pHEMT for Wireless ApplicationsDefect Segmentation of Semiconductor Wafer Image Using k-Means ClusteringOptimization of L-Band Ring Cavity Brillouin Erbium Fiber LaserThe Development of Novel High Speed ? Low Noise pHEMT Device for Lossless Underwater Optical CommunicationHigh Speed All-Photonic Flip-Flop Operation at a Single WavelengthNondestructive Fruit Ripeness Detection System and its Spectral AnalysesRoom Access Control System Using Facial Image RecognitionLeak Detection in Gas Pipeline Using Hilbert-Huang TransformReal-Time Self-Tuning Speed Controller: Performance Comparison between Engine Fuelled with Palm Methyl Esters and Petroleum DieselOverview of Harmony Search (HS) Algorithm for Green Manufacturing IndustriesGravitational Search Algorithm for Engineering: A ReviewAppraisal of Mega Float - Floating Offshore Remote Terminal (FORT) on Catenary Mooring for Deep WaterEffectiveness of Safety Management in Oil and Gas ProjectEffectiveness of Human Resource Utilization in Oil and Gas ProjectDynamic System Models Sutami Hydropower Plant Indonesia to Calculate the Economic and Environmental Aspects of Hydropower Plant OperationEnergy and Environment Implications of Long-Term Power Development Involving Renewable Energy: A Case of Timor Island, Indonesia