Key Engineering Materials III
Published on 13. July 2013
Software
Digital media
468 pages
978-3-0357-3914-5 (ISBN)
Description
Collection of Selected, peer reviewed papers from the 2013 3rd International Conference on Key Engineering Materials (ICKEM 2013), March 8-9, 2013, Kota Kinabalu, Malaysia.
The 85 papers are grouped as follows:
Chapter 1: Novel Composite Materials and their Characterization;
Chapter 2: Advances in Materials Technology;
Chapter 3: Developments in Magnetic Materials, Electrical Composites, Thin Films and ZnO Technology;
Chapter 4: More Studies on Nano Materials, Nano Composites and Nano Technology;
Chapter 5: Developments in Biocomposites, Bioethanol and Green Materials;
Chapter 6: Lightweight Foamed Concrete, Foamed Greencrete, Cement Syntactic Foam;
Chapter 7: Chemical Engineering, Corrosion, Geochemistry and Geotextile;
Chapter 8: Advances in Manufacturing Techniques;
Chapter 9: Wastewater Treatment and Biotechnology;
Chapter 10: Analysis of Composite Structures and Other Miscellaneous Researches.
The 85 papers are grouped as follows:
Chapter 1: Novel Composite Materials and their Characterization;
Chapter 2: Advances in Materials Technology;
Chapter 3: Developments in Magnetic Materials, Electrical Composites, Thin Films and ZnO Technology;
Chapter 4: More Studies on Nano Materials, Nano Composites and Nano Technology;
Chapter 5: Developments in Biocomposites, Bioethanol and Green Materials;
Chapter 6: Lightweight Foamed Concrete, Foamed Greencrete, Cement Syntactic Foam;
Chapter 7: Chemical Engineering, Corrosion, Geochemistry and Geotextile;
Chapter 8: Advances in Manufacturing Techniques;
Chapter 9: Wastewater Treatment and Biotechnology;
Chapter 10: Analysis of Composite Structures and Other Miscellaneous Researches.
More details
Series
Language
English
Place of publication
Switzerland
Publishing group
Trans Tech Publications
Target group
Professional and scholarly
Dimensions
Height: 142 mm
Width: 125 mm
Thickness: 10 mm
Weight
200 gr
ISBN-13
978-3-0357-3914-5 (9783035739145)
DOI
10.4028/www.scientific.net/AMR.701
Schweitzer Classification
Other editions
Additional editions
Haider F. Abdul Amir
Key Engineering Materials III
Selected, peer reviewed papers from the 2013 3rd International Conference on Key Engineering Materials (ICKEM 2013), March 8-9, 2013, Kota Kinabalu, Malaysia
Book
07/2013
Trans Tech Publications Ltd
€215.41
Shipment within 10-15 days
Haider F. Abdul Amir
Key Engineering Materials III
E-Book
05/2013
Trans Tech Publications Ltd
€206.51
Available for download
Content
High Volume Fraction Aluminum /Alumina-Fused Silica Hybrid Particulate Metal Matrix CompositeTensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibre Composite Filled Thermosetting Polymer CompositesDevelopment of Concrete Mix Design Nomograph Containing Polyethylene Terephtalate (PET) as Fine AggregatePP/PS/PMMA Ternary Blend Foaming Using Supercritical CO2Effect of Different Vacuum Pressure on the Tensile Properties of Sugar Palm Frond Fibre Reinforced Polyester CompositesCarbon Doped Iron Ore Using Palm Kernel ShellFlexural Strength Behavior of Composite UHPFC - Existing ConcreteMechanical Properties of Rubber Toughened Polyester Filled Carbon BlackComparison of Melt Flow and Mechanical Properties of Rice Husk and Kenaf Hybrid CompositesDielectric Properties of the Composite Insulator Mica Epoxy-NovolacSound Absorption Coefficients Natural Fibre Reinforced CompositesEnvironmental Stress Cracking Resistance (ESCR) of Rubber-Toughened Polyester-Kenaf Composites under Active EnvironmentThermal Characterizations and Mechanical Properties of Hybrid Blends of Pva/Starch/LLDPEEvaluation on Diffusion of Bipolar Junction Transistor (BJT) Charge-Carrier and its Dependency on Total Dose IrradiationFatigue Life for Type 316L Stainless Steel under Cyclic LoadingEffect of Tubes Length and Annealing Temperature on Energy Absorption of Aluminium Alloy Tube 6061-T6 under Inversion Collapse ModeReview of Self-Healing Effect on Shape Memory Alloy (SMA) StructuresEffect of Chitosan Compounds on Composite Fibers PropertiesCryogel Based Oil Encapsulation for Controlled Release of Curcumin by Using a Ternary System of Chitosan, Kappa-Carrageenan, and Carboxymethylcellulose Sodium SaltSynthesis of VTES/SBA-15 Prepared by Post-Grafting: XRD Characteristics on the Effect of Calcination PropertiesEffect of New Thermal Insulation to the Growth of LiNbO3 Single Crystal by Czochralski MethodConduction Mechanism and Dielectric Properties of Solid Biopolymer Electrolyte Incorporated with Silver NitrateElectrical Properties of Starch Based Silver Ion Conducting Solid Biopolymer ElectrolyteElectronic Structure of Defects in SnTeSynthesis and Characterization of Strontium-Doped Lanthanum Cobaltite Cathode Material Prepared by a Modified Combined Complexing MethodEffect of Dielectric Waveguide in the Design of RLSA Antenna: A ReviewMagnetization of Low Grade Iron Ore Using Empty Fruit Bunch AshTunable Silver Leaching from Polyelectrolyte Multilayers Thin FilmsEffect of Al2O3 on the Electrical Conductivity and Structural Study in MgI2-Mg3(PO4)2 Based Solid ElectrolyteExchange Coupled Composite Media for Magnetic Recording ? Issues and ChallengesSynthesis and Characterization of Zinc Oxide Hollow and Flower like Microspheres by Simple One Step Solvothermal ApproachSynthesis of ZnO Thin Film on Porous Silicon by Spin Coating in Various Low Molarities PrecursorSynthesis and Characterization of ZnO Thin Film MemristorHydrogen Storage Investigation of Fixed Bed of Nanocrystalline Mg-Ni-Cr Mixed OxidesMorphological and Structural Study on Titania Nanotubes Formation by Difference VoltageA Comparative Study of Confined Carrier Concentration of Laser Using Quantum well and Quantum Dot in Active LayerCharacteristics of Dammar Based Paint System with the Addition of Silver NanoclayElectrical Conductivity and Hardness Property of CNTs/Epoxy NanocompositesCable and Wire Application: Adoption of Nanomagnesium Hydroxide Blended with LDPE/EVA for Mechanical and Physical PropertiesThermal Stability Study of Ce0.75-Zr0.25O Nanostructures Synthesized via Water-in-Oil Microemulsion MethodThe Effect of Synthesis Method on the Physico-Chemical Properties of Magnetite Iron Oxide NanoparticlesA Thermal Controlled Release of Naproxen from Sodium Phosphorylated Chitosan NanoemulsionFlexural and Impact Properties of Biopolymer Derived from Sugar Palm TreePreparation of Biodegradable Film from Esterified Corn Husk CelluloseEnhancement the Dissolution Rate and Solubility of Poorly Soluble Drugs: ReviewEffect of Alkali Treatment on the Tensile Behavior and Structure of Betel Nut (Areca catechu) Husk FiberBiomaterials Availability: Potential for Bioethanol ProductionEnergy Efficient Microwave Irradiation of Sago Bark Waste (SBW) for Bioethanol ProductionThe Effect of Processing Parameters Onpoly (Lactic Acid)/Poly(Ethylene Oxide)Bicomponentultrafine Fibersby Co-ElectrospinningImpact Energy for First Crack of Reinforced Concrete with Partial Replacements of Sand by Rubber 1 mm Particle SizeUse of Plastic Waste (High Density Polyethylene) in Concrete Mixture as Aggregate ReplacementMorphology of Formulated Used Cooking Oil Foam (FUSCOF) Created for Lightweight GreencreteMorphology and Physical Analysis of Waste Paper Sludge Ash (WPSA) Polymeric MortarDevelopment of Precast Lightweight Foamed Concrete Sandwich Panel (PLFP) with Double Shear Truss Connector: An OverviewImpact Energy for the First Crack of Reinforced Concrete with Partial Replacements of Sand by Fine Crumb RubberThe Influence Wall Thickness of Cement Hollow Spheres towards Compressive Properties of Cement Syntactic FoamEffect of Fineness of Fly Ash on Powder Packing Density and Paste PerformanceApplication of Plasma Treated Activated Carbon to Enhancement of Phenol Removal by Ozonation in Three-Phase Fluidized Bed ReactorEffect of Humic Acid on Geochemistry Properties of KaolinComparative Electrochemical Performance Characteristics of Aluminium-Air Cell Employing Seawater and NaCl ElectrolytesThe Effect of Amorphous Rice Husk Silica to the Polysulfone Membrane Separation ProcessNatural Corrosion Inhibitor for Corrosion Protection of Metal Artefact: An OverviewRheological Properties of Urea-CaLS Mixture for Urea Fertilizer GranulationPerformance of Nonwoven Geotextile as a Filter at Road ShoulderMathematical Modelling of Urea-Formaldehyde Polymerization Kinetics Using Mechanism ApproachSimplified Colorimetric Method Using Reactive Orange 16 for Analysis of Cationic SurfactantInfluence of Machining Parameters on Surface Roughness in WEDM Titanium AlloyInvestigation of Chip-Tool Interface Temperature during Turning of Hardened AISI 4340 Alloy Steel Using Multi-Layer Coated Carbide InsertsReal Coded Genetic Algorithms for Solving Flexible Job-Shop Scheduling Problem - Part I: ModellingReal Coded Genetic Algorithms for Solving Flexible Job-Shop Scheduling Problem - Part II: OptimizationTi6Al4V Surface Hardness Improvement by Duplex CoatingOverview Potential Applications of Cold Spray Process for Aviation Industry in MalaysiaDevelopment of a New Approach for Incorporating Tool Tilting in Friction Stir WeldingExperimental Study on Welding Fumes Exposure from Aluminum Metal Inert Gas (MIG) Process Elemental Analysis and Wettability Properties of Polyene with Epoxidised Oil Based CoatingScreening Microbial Surface Active Compound Produced by Bacteria Isolated from Various Waste StreamsIonic Liquids: Green Solvent for Pretreatment of Lingnocellulosic BiomassA Metaheuristic Approach to Transmembrane Protein Assembly Using Limited Distance RestraintsCharacterization of Rambutan Seed (Nephelium lappaceum) as Natural Adsorbent for Wastewater TreatmentStorage Conditions and Particle Size Effects on Powder Cohesion Index Using Stable Micro SystemEffect of Polycaprolactone Electrospun Fiber Size on L929 Cell BehaviorFinite Element Analysis of Composite Cylinder with Centre Cutout under Axial Load and Internal PressureComprehensive Review on the Utilization of PALFAnalysis of Surface Electromyography for On-Off ControlStudy and Comparison of Vibration-Based Intrusive and Non-Intrusive Sand Monitoring System