Advanced Research on Material Science, Environment Science and Computer Science III

Preface and Committee
Chapter 1: Materials Science and Processing of Materials
Research on Formability of AZ31B Magnesium Alloy at Room Temperature
Effect of Mineralizer Concentration on ZnO Crystals Synthesized by Hydrothermal Method
Corrosion Inhibition of Sodium Hexametaphosphate for Carbon Steel in KCl Solution
The Effect of the Electro-Deposition Temperature to the Texture of Silicon Steel Sample
Studies on Synthesis Mechanism of Fe-Si Alloy
Effect of Temperature and Pressure on the Nitrogen Content of High Nitrogen Steel
Effect of Bottom Blowing Time and Bottom Blowing Rate on the Nitrogen Content of High Nitrogen Steel
Effect of Extrusion on Mechanical Properties of Spray Forming 8009 Heat Resistant Aluminum Alloy
Research on the Second Phase of Spray Forming Al-8.5Fe-1.3V-1.7Si Aluminum Alloy
Alloy Design of New Ni-Based Structural Materials for Electrolytic Reduction and its Corrosion Behavior in Lithium Molten Salt
Numerical Simulation and Optimization of "Non-Catalytic Reduction" Process for Circulating Fluidized Bed Boiler Based on Properties of Materials
A Study of the Fire Resistance against Structural Materials of H-Section Made of SS 400 by Boundary Conditions at High Temperature
Experimental Research on Lead-Zinc Separation of Refractory Lead-Zinc Ore
Effect of Subcritical Quenching on Microstructure and Mechanical Properties of EH36 Alloy
A Comparable Study on the Effects of Pristine and Functionalized Single-Walled Carbon Nanotubes on Schwann Cells
Effect of Aging Treatment on the Microstructures and the Magnetic Properties of the Sintered Nd-Fe-B Magnet
Progress on Mg2Si Thermoelectric Materials
Experimental Fabrication and Property Research of Thermo-Sensitive Organic-Inorganic Hybrid Nano-Microcapsule
Indirect Enzyme-Linked Immune Method for the Detection of Binders in Ancient Chinese Textiles
Characterization of a Novel Zeolite Synthesized from Coal Fly Ash
Preparation and Process Research of Starch/Thatch Composite
Study on the Microstructure and Properties of WC Steel Bonded Carbide by Composite Electroslag Remelting
Influence of Heat Treatment Process to Advanced Steel Matrix Composites of Engineering Machinery Equipment
SERS-Active Ag Decorated Polymer Nanorod Substrate Fabricated by the Combination of Photochemical Reduction and Nanoimprint Technology
Study on Wear Behavior of Plasma Arc Cladding of Tunneling Machine Pick
Behavior of Flow Stress of Al-Mn Alloy during Hot Compression
Structure Characterization of Fe-21Cr-17Mn-2Mo-Nb-0.83N Alloy Processed by Surface Mechanical Nanocrystallization
Experimental Study on Geometric Optimization of Thermoelectric Generation
Dynamic Characteristic of AlN Precipitate in Production of High Strength and Low Carbon Steel in FTSR Technology
Characteristics of Deposition Precipitation Process in Production of High Strength and Low Carbon Steel in FTSR
Rotation Feature of Three-Dimensional Tile Self-Assembly Molecular Structure for Efficient Microprocessor Material
Mechanical Reliability of Oxidized Zircaloy-4 Alloy Nuclear Cladding Tube in Compression
Chapter 2: Chemical Technologies and Materials
Synthesis and Photochromism Studies of 1-(2-methyl-3-benzothiophene)-2-[2-methyl-5-(4-aminomethanephenyl)-3-thienyl]perfluorocyclopentene
Synthesizes and Properties of 1-[2-methyl-5-(4-methoxyphenyl)-3-thieny-2-[2-methyl-5-(3-methoxy-4-formyphenyl)-3-thienyl] perfluorocyclopentene
Synthesis and Properties of [1-(2-Methyl-5-pheyl-3-thienyl)-2-(2-methyl-5-(4-cyanophenyl)-3-thienyl]perfluorocyclopentene for Fluorescence Switch
Synthesis and Properties of 1-[2,5-dimethyl-3-thienyl]-2-[2-methyl-5-(p-N,N-dimethylaminophenyl)-3-thienyl]perfluorocyclopentene
Efficient Synthesis and Properties of a Photochromic Hybrid Diarylethene Bearing a Pyrimidine Moiety
Synthesis and Properties Study of 1-(2,4-dimethoxyl-5-pyrimidinyl)-2-[2-methyl-5-(3-methylbenzene)-3-thienyl]perfluorocyclopentene
Synthesis and Photochromism of 1-(2-methyl-1-benzothiophene)-2-(2-methyl-5-aminomethane-3-thienyl)perfluorocyclopentene
Synthesis and Photochromism Studies of 1-(2,4-dimethoxyl-5-pyrimidinyl)-2-[2-methyl-5-(3-trifluoromethylphenyl)-3-thienyl]perfluorocyclopentene
Photochromism, Kinetics and Fluorescence of 1-(2-methyl-3-benzofuranyl)-2-[2-methyl-5-(4-cyanophenyl)-3-thienyl]perfluorocyclopentene
Synthesis and Properties of 1-[(2-methyl-5-chloro)-3-thienyl]-2-[(2-methyl-5-(2-fluorophenyl)-3-thienyl]perfluorocyclopentene
Synthesis and Photochromic Properties of 1-(2-methyl-1-phenyl)-2-[2-methyl-5-(4-formylphenyl)-3-thienyl]perfluoroyclopentene
Effect of Bore Liquid Flow Rate on the Structure and Performance of Poly(vinyl chloride) Hollow Fiber Membrane
The Way of Obtain C5H7O+ Fragments Laser-Induced by Cycloheptanone Ion Excited State
Easy Precipitation Method for Preparation of Cerium Added La2O2SO4 Used for Oxygen Storage
Hard Template Route for Synthesis of Mesoporous Spinel Type Oxides with Ordered Structure
Study on Technology of Pre-Hydrolysis Pretreament in Bagasse Dissolving Pulp Preparation Process
Chapter 3: Environmental Engineering
Three-Dimensional Electrode Used for Low Concentration Wastewater Containing Cu2+
Study on Countermeasures of Water Pollution Accident after Chemical Industry Fire
Monodispersion Soot Interference Attached on the Protection Windows on NO2 Concentration Accuracy Using NDIR
Protection Windows Interference of the Multidispersion Soot on NDIR NO2 Concentration Accuracy
Windows Multidispersion Soot Interference on SO2 Concentration Measurement Accuracy Using NDIR
Exposure and Carcinogen Risk Assessment to Human Beings Caused by Cd in Pearl River Basin
Environment Protection with Analysis of Relations between Independent Innovation and Development of the Green Economy
Pb Contamination and Pb Isotopic Signinatures in Roadside Dusts in Hebi City, China
Transition of Land Cover Characteristics at Wild-Fired Watershed
Absorption of Hg (II) Form Aqueous Solution onto Double Crosslinked Amphoteric Cassava Starch Resin
Experimental Study of EGR on Performance andEmissions of a Turbocharged DME Engine
Preparation of Titanium Dioxide Nanotube Arrays and Photocatalytic Degradation of Methyl Orange
Characteristics of Heavy Metals Pollution in Roadside Dusts in Chang'an Street of Beijing City
Occupational Exposure Assessment of CaCO3 Nanoparticles Using a Multi-Metrics Approach
Enrichment and Detection of Dichlorvos and Methamidophos on Carbon Nanotubes
Research on Applied Technology and Tidal Current Control with Numerical Simulation of Pulandian Bay
On Evaluation Model of Green Technology Innovation Capability of Pulp and Paper Enterprise Based on Support Vector Machines
Selection and Application of Green Packaging Materials
Growth and Development of Feijoa with Different Plant Shape and in Greenhouses Environment
Biological Species and Environment Study on Overwintering Protection of Raspberries and Blackberries and their Growing and Development
Different Rootstocks and Physiological and Biochemical Change of SUM Cherry in Greenhouse Environment
Growth Effects of Pb stress on Seedling of Lactuca sativa L. and Brassica campestris L.ssp
Environment Effects of Tuberose Forcing Culture by Different Planting Dates and Varieties
On the Rigid-Lid Hypothesis Application to the Flow Simulation of Step-Feed A/O Process
Velocity and Sludge Distribution Simulation of the Aerobic Tank of Step-Feed A/O Process
Chapter 4: Microbiology, Biomaterials and Biotechnologies
Application of Different Biomaterials in Achilles Tendon Repair for Exercise Injury
Hydroxycamptothecin Stealth Liposomes: Containing TPGS as a Novel PEGylated Long-Circulating Coating Material
Preparation and Antibacterial Activity of One Novel Leather Material
Biological Species and Environment Study in Microsystins Causing Apotosis in Heart
Relationship between Concentration of Fine Particulate Matter and Plasma vWF Level in Healthy Young Adults
Using 16S rDNA as Target Site for Homologous Recombination to Improve the Alkaline Protease Production of Bacillus alcalophilus
Applied Technology in Evoked Auditory Response In Vivo Animal Cochlea by 980nm Pulsed Laser Light
Chapter 5: Engineering Solutions for Machinery
Structure Improvement and Performance Analysis of a Coupling Component for Board-Level Photoelectric Interconnection
Design and Simulation of Self-Adapting Anti-Interference Algorithm with Information Technology in Satellite Navigation
Research on Applied Technology with PID Control Theory and Design Methods
Technology Study on the Different Cognitive Process of Stereopsis between Crossed and Uncrossed Fine Disparity
Research on Task-Based Usage Control Core Models in Workflow for Manufacturing Environment
Applied Technology in Digital Telescope Camera's Research and Design Based on DSP
Study on Electronic Materials with Performance of Meander-Line Inverted-F Antenna
Study on Anti-Noise Materials with Multi-Level Filter Based on the Adaptive Noise Cancellation System
The Control Method with Energy Saving of the Inflow Turbulence for Router Cooling Fan
Oscillating Mechanics by Vector Graphics Means to Explain Phase Balanceable Principle Basing on Tri-Port Oscillator
Nomograms for Determination of Effective Length of the Unregular Frames Based on Mechanics and Steel Structure
Pseudo-Dynamic Test Analysis of Space Steel Frame with T Steel Connection
Drag Coefficients Acting on Two Tandem Cylinders of Different Diameters
Lift Coefficients and Pressure Distribution Acting on Two Tandem Cylinders of Different Diameters
Research on Cylindrical Launcher with Cylindrical Launch Parameters Simulation
Method of Calculating Chamber Earth Pressure of EPB Shield
Research and Application of Slope Stability Analysis Method Based on Engineering Mechanics and Engineering Materials
Vortex Shedding with Fluid Mechanics from Two Cylinders of Different Diameters in a Tandem Arrangement
The Surface Deformation Law with Engineering Mechanics Caused by Construction of Tunnels with Large Section and Small Interval
Finite Element Analysis of Composite Overwrapped Pressure Vessel Based on the Laminated Plate Theory
Optimization of Fracturing Fluid Flowback Based on Fluid Mechanics for Multilayer Fractured Tight Reservoir
Influence of Fracture Parameters on the Productivity of Fractured Horizontal Well Based on Fluid Mechanics in Tight Gas Reservoir
Environmental Study with Analysis the Characteristics and Safety Distance of LPG Pool Fires
Chapter 6: Technologies in Energy Supply and Saving
Utilization Technology of Metallurgical Waste Heat
The Application of ZigBee in Hot Rolling Energy Management System
A Method with Energy Saving for Investment Decision of Wind Power Project Based on TOPSIS
Research on Energy Saving for the Case Analysis of Building Energy Conservation in Xichang City
Research on Implement of the Application of Demonstration of Renewable Energy Source in Architecture in Liangshan State
Study of Lithium Bromide-Water Binary Solution in the Application of Hot Springs Geothermal Energy
The Path Segmentation Algorithm of Microgrid Distribution Network on Reliability Evaluation
Research on Applied Technology in Modeling Buck Switching Converter
Information Technology in Circuit Design of On-Line UPS
An Intelligent Operational Model of Weather Modification in Yunnan Province
Chapter 7: Data Processing and Algorithms of Computational Mathematics in Engineering Sciences
Research on Applied Technology of Palmprint Recognition Based on Fisher Linear Discriminant and Improved PCA Algorithm
Research on Information Technology with Character Pattern Recognition Method Based on Rough Set Theory
Research on Applied Technology with Characteristics of Different Inversion Method Based on AIC Selection
Research on Applied Technology in Comparison of the Traditional Inversion Method and the AIC Method
Research on Information Technology with Wine Quality Evaluation Based on Neural Network
The Design of Real-Time Face Detection System for Smart Home
Research on Information Applied Technology with Analysis of Auction Data Fluctuations of Flowers Based on Generalized Autoregressive Conditional Heteroscedasticity
Research on Information Applied Technology with Data Analysis of Flowers Auction Data Based on Cointegration and Granger Casualty
Research on Information System for Teaching Quality Evaluation Model of Business English Translation Based on SVM
The Research and Design of Image Processing System Based on FPGA and DSP
Information Technology in an Improved Moving Target Detection Algorithm
Applied Technology in Assembly Line Balancing Based on Genetic Algorithm and Simulation
Intelligent Parameters Identification of Radar Echoes in Yunnan Province
Information System in Image Classification Based on SVM and Color Clustering Analysis
Bioinformatics Study with an Implementation of Two Feature Extraction Algorithms for Protein Sequences
Research on Image Technology with Image Recognition of Wheat Diseases Based on Multi-Fractal and LVQ Neural Network
Research on Information Applied Technology with Swarm Intelligence for the TSP Problem
New Tabu Search Algorithm for Multi-Vehicle and Multi-Cargo Loading Problem
Comparison of Heuristics for Resolving the Traveling Salesman Problem with Information Technology
Evaluation of Ground Thermal Infrared Camouflage Based on Dynamic DEA Model
Chapter 8: Computer Sciences and Information Technologies
Applied Technology for Usage Control Model in Pervasive Computing
Semantic Web Technologies and NLP Techniques in a Practical Algorithm for Representing Concepts in Linked Data
ODF: An Efficient OWL-Based Linked Course Data Generating Framework
Research on Information Applied Technology with Medical Search Engine for the General Public: A Survey of Demand
Applied Technology in an Interactive Design for a Web-Based Language Teaching System
Applied Technology in an Interactive System Design for ELT
Information Technology Based Supervision and Management of Online Drug Transactions in China
Research on Information Applied Technology with Video Compression Algorithms Based on the Optimal Multi-Band Haar Wavelet Transform
Research on Information Technology with Transformation Method of Activity from EPMM-Based Software Evolution Process Model to its Execution Model
Research on Information Technology with a New Microblog Heat-Algorithm Combining Blogger's Authority
Research on the Performance Analysis of Network Intrusion Detection of AC Algorithm
Research on Image Technology with Progressive Image Compression Based on JPEG and Laplacian Pyramid
Research on Information Technology with Modeling and Simulating of Video Grid
Information-Applied Technology in Exploration-Internalization Mode
Information Technology and an Audio Retrieval Method Based on a Novel Audience Rating System
A New MANET Accessing Internet Method Based on Complex Network
An Artificial Immune System Based on Intelligent Agents
The Extended Algorithm of the Bipartite Graph Matching Semantic Web Service Discovery
Exception Context Reappearance and Analysis for Multi-Role Collaborative Web System
Component Subnet Combination and its Case Study under the Model of EOOPN
Study on the Types of EOOPN Subnet Combination
Research on the Development of WebSocket Server
Research on Information Technology with Voiceprint Authentication Algorithm and its Implementation on Mobile Terminal
Research on Information Technology with Design and Implementation of Voiceprint Authentication System Based on Android
Research on Applied Technology in Blind and Shape-Preserving Watermarking of Vector Map Data Using Variable Quantization Step
The Problems to be Tackled with in the Normalization of the Computer-Assisted English Learning in the Chinese Mainland Context
Information Technology in the EMIS Integration with Virtual Private Green Cloud