Mechanism Design for Robotics

Name: Mechanism Design for Robotics | MEDER 2021
Brand: Springer
Price: 255.73 EUR
Availability: OnlineOnly

MEDER 2021

Saïd Zeghloul Med Amine Laribi Marc Arsicault(Editor)

Springer (Publisher)

1st Edition

Published on 8. May 2021

XIV, 334 pages

E-Book

PDF with digital watermarking

System requirements

978-3-030-75271-2 (ISBN)

€255.73incl. 7% vat

System requirements

for PDF with digital watermarking

E-Book Single Licence

Available for download

Description

More details

Other editions

Content

Intro
Preface
Organization
Program Chair
Program Committee
Introduction to the Special Session in Honour of Prof. Said Zeghloul
Contents
I Linkage and Manipulators
Analytical Movement Optimization of Dual-Arm Planar Robots with Rotating Platform
1 Introduction
2 Analytical Model
3 Simulation Results and Discussion
4 Conclusions
References
Inverse Kinematics and Velocity Analysis of a 6-DOF Hexapod-Type Manipulator with a Circular Guide
Abstract
1 Introduction
2 Manipulator Architecture
3 Kinematic Analysis
3.1 Inverse Kinematics
3.2 Velocity Analysis
3.3 Case Study
4 Conclusions
Acknowledgements
References
Torque Minimization of Dynamically Decoupled R-R Spatial Serial Manipulators via Optimal Motion Control
Abstract
1 Introduction
2 Dynamic Decoupling of the R-R Spatial Serial Manipulator
3 Motion Generation via "Bang-Bang" Profile
4 Illustrative Example and Simulation Results
5 Conclusion
References
Kinematic Analysis of a Coaxial 3-RRR Spherical Parallel Manipulator Based on Screw Theory
1 Introduction
2 Coaxial SPM Description
3 Position Analysis
3.1 Inverse Kinematics
3.2 Forward Kinematics
3.3 Numerical Results
4 Velocity Analysis
4.1 Numerical Results
5 Conclusions
References
A Novel Design for an Autonomous Mobile Agricultural Fruit Harvesting Robot
1 Introduction
2 Motivation
3 Design Considerations
4 Mechanical Design
4.1 Chassis Design
4.2 Manipulator Design
4.3 End-Effector Design
5 Architecture
6 Concluding Remarks
References
II Parallel Manipulators
A Comparison of Algebraic and Iterative Procedures for the Generation of the Workspace of Parallel Robots
Abstract
1 Introduction
2 Workspace Determination
2.1 Workspace Discretization
2.2 Algebraic Geometrical Approach
3 Numerical Examples
3.1 CaPaMan
3.2 3-UPR Mechanism
3.3 Results and Discussion
4 Conclusions
References
Symbolic Kinematics of Special 3-RSR Parallel Mechanism with Zero Coupling Degree
Abstract
1 Introduction
2 The Antenna PM with Zero Coupling Degree
3 Position Analysis
3.1 Descriptions of the Kinematics Modeling
3.2 Analysis of Forward Position Solution
3.3 Analysis of Inverse Position Solution
4 Examples
5 Workspace Analysis of Decoupling Optimized Model
6 Conclusions
Acknowledgments
References
Inverse Kinematics and Workspace of a 3-PRRS Type Parallel Manipulator
Abstract
1 Introduction
2 Workspace Analysis
3 Numerical Results
4 Conclusions
Acknowledgment
References
Investigation of Interference-Free Workspace of a Cartesian (3-PRRR) Parallel Manipulator
1 Introduction
1.1 Description of the Mechanism
2 Link Interference
2.1 Algorithm 1- Interference Free Workspace
2.2 Algorithm 2- Largest Inscribed Cuboid
3 Results and Discussions
4 Conclusions and Further Works
References
Exit Point, Initial Length and Pose Self-calibration Method for Cable-Driven Parallel Robots
1 Introduction
2 CDPR Modelling
3 Identification Methodology
4 Simulation Results
4.1 Effect of Tuning Parameters
4.2 Effect of Number of Poses
4.3 Results Analysis
5 Conclusions and Future Work
References
Kinematic Simulation of a Geared Planar Parallel Manipulator
Abstract
1 Introduction
2 A 3-R(PRRGR)RR Planar Parallel Manipulator with Geared Linkages
2.1 Inverse Positional Kinematic Approach
3 Numerical Example
4 Conclusions
References
III Mechanics of Robots
Design Criteria Study for Underactuated Symmetric Pinching Mechanism of Pinch Roll Machine in High-Speed Wire Rod Product Line
Abstract
1 Introduction
2 Existing Problems Discussion
3 Underactuated Pinching and Conveying Mechanisms
4 Design Criteria Study Based on Statics and Kinematics
5 Conclusion and Prospection
References
Design of a Reconfigurable Novel Constant-Force Mechanism for Assistive Exoskeletons
Abstract
1 Introduction
2 Design Modeling and Stiffness Simulation
2.1 Basic Concept of HLCFM
2.2 Design of a Reconfigurable Constant-Force Mechanism
2.3 Simulations
3 Prototype and Testing
3.1 Prototype Design and Test Rig
3.2 Experiments
4 A Compact Design of a Passive Upper-Body Exoskeleton
5 Conclusion
Acknowledgments
References
Aerodynamic Double Pendulum with Nonlinear Elastic Spring
Abstract
1 Introduction
2 Aerodynamic Double Pendulum
3 Equations of Motion
4 Limit Cycles
5 Conclusions
References
Design of a Flexible Interphalangeal Joint
Abstract
1 Introduction
2 Design Requirements
3 Experimental Test Model
4 Results
5 Conclusion
Acknowledgements
References
IV Mechanism Deign
A Reconfigurable Underactuated Grasper with In-Hand Manipulation
Abstract
1 Introduction
2 Grasper Design
3 Analysis
4 Prototype and Testing
5 Conclusions
Acknowledgments
References
Design of a Robotic Brace with Parallel Structure for Spine Deformities Correction
Abstract
1 Introduction
2 From Medical Specifications to Brace Concept
3 Mechanical Design of Robotic Brace
3.1 The Mechanism Architecture
3.2 Kinematic Constraints
4 Robotic Brace Integration
4.1 Actuator
4.2 Control of the Stewart Platform
4.3 Sensors
5 Simulation and Results
5.1 Evaluation of Position Controller
5.2 Determination of the Range of Motion
5.3 Validation of the Force Control
6 Conclusion and Future Works
Acknowledgements
References
An Adaptive Drive of Spacecraft Docking Mechanism
Abstract
1 Introduction
2 Description of the Docking Mechanism
3 Adaptive Gear Variator Description
4 Description of Adaptive Drive of Docking Mechanism
5 Mathematical Model of Adaptive Drive
6 Analysis of Drive Modes
7 Conclusion
References
Driving Mechanism in Robotized Hospital Bed for Patients with COVID 19
Abstract
1 Introduction
2 Problem and Requirements
3 The Proposed Driving Mechanism
4 Performance Analysis
5 Conclusions
References
Synthesis of a Function Generator Six-Bar Linkage in Two Steps with Genetic Algorithm
Abstract
1 Introduction
2 Methods
3 Results and Discussion
4 Conclusions
References
Design and Analysis of a Device for Enlarging the Allowable Position Error for Screwing Task
Abstract
1 Introduction
2 Design Concepts
3 Motion Analysis
4 Conclusions
References
Dimensional Synthesis of a Four-Bar Linkage Assessing the Path and Reformulating the Error Function
Abstract
1 Introduction
2 Synthesis Equations
3 Path Characterization of the Coupler Point of a Four-Bar
3.1 Analytical Formulation of Branches and Circuits
3.2 Treatment of Synthesis Considering Branches and Circuits
3.3 Avoiding Order Defect
4 Error Function Reformulation by Adding the Slope of the Curve
5 Demonstrative Example
6 Conclusions
Acknowledgments
References
V Actuators and Control
Motion Control of 6-DOF Relative Manipulation Device
Abstract
1 Introduction
2 RS Model Development
3 Development of a RS Model Taking into Account the Geometry of the End Effector and the Relative Position of the Modules
4 Numerical Experiments
5 Conclusions
Acknowledgements
References
Genetic Algorithm with Iterative Learning Control for Estimation of the Parameters of Robot Dynamics
Abstract
1 Introduction
2 Problem Formulation
3 Genetic Algorithm with ILC for Estimation of the Parameters of the Dynamics
3.1 Initialization of the First Generation
3.2 Selection
3.3 Crossover Operation
3.4 Mutation Operation
3.5 Terminal Condition
4 Simulation Results
5 Conclusion
Acknowledgement
References
Control of the Vibrations of a Cartesian Automatic Machine
1 Introduction
2 Experimental Tests on the Cutting Machine
3 Structural Modifications
4 Prediction of the Effect of a TVA by Means of the Sherman-Morrison Formula
5 Effect of Machine Acceleration
6 Conclusion
References
VI Innovative Mechanism/Robot and their Applications
Design of the 2 D.o.F Compliant Positioning Device Based on the Straight-Line Watt's Mechanisms
Abstract
1 Introduction
2 Compliant Straight-Line Mechanisms
3 Design of the 2 D.o.F Positioning Platform
4 Conclusion
Acknowledgment
References
Optimal Design of a Five-Bar Mechanism Dedicated to Assisting in the Fingers Flexion-Extension Movement
Abstract
1 Introduction
2 Fingers Rehabilitation Devices
2.1 Kinematical Analysis for the Five-Bar Mechanism Proposal
3 Synthesis Problem
3.1 Formulation of the Problem
3.2 Gradient Implementation
4 Conclusion
Acknowledgments
References
An Extendable Continuum Robot Arm to Deal with a Confined Space Having Discontinuous Contact Area
Abstract
1 Introduction
2 A Geometric Analysis and Evaluation Indices to Determine a Workspace Capable of Avoiding Insufficient Configurations
3 Experimental Validation Using a Prototype Setup
4 Conclusion
Acknowledgement
References
Mobile Manipulator and EOAT for In-Situ Infected Plant Removal
Abstract
1 Introduction
2 Project Overview and Simulated Model of Potato Field in the Lab
3 Analysis the Possible Options for Roguing Mechanism
3.1 Grasping Mechanism Design Methodology
3.2 The Best Options
4 Final Design
4.1 Parts of the Mechanism
4.2 Motion Study
5 Prototype Model
6 Conclusion
References
New Variable Stiffness Joint (VSJ): Study and Simulation
Abstract
1 Introduction
2 Variable Stiffness Joint Proposal
3 VSJ Mathematical Model
4 Simulation
5 Conclusions
References
VII Special Session in Honor of Prof. Said Zeghloul
Design of an 8-DoF Redundant Robotic Platform for Medical Applications
Abstract
1 Introduction
2 Robot Modelling
2.1 Denavit-Hartenberg Parameters
2.2 Kinematic and Dynamic Modeling
2.3 Control Law
3 Preliminary Results
4 Prototype
5 Conclusion
Acknowledgements
References
Serial Approach for Solving the Forward Kinematic Model of the DELTA Robot
1 Introduction
2 DELTA Robot
2.1 Forward Kinematic Model
2.2 Inverse Kinematic Model
3 Serial Approach Numerical Validation
4 Conclusion
References
On the Optimal Design of LAWEX for a Safe Upper Arm Rehabilitation Exercising
Abstract
1 Introduction
2 The LAWEX Rehabilitation Device
2.1 The LAWEX Robot
3 Multi-objective Synthesis of LAWEX Robot
3.1 Compactness Objective Function
3.2 Patient Safety Characterization
3.3 Cables Tensions Minimization
3.4 Problems Constraints
3.5 Problem Formulation
3.6 Implementation and Results
4 Conclusion
References
A Reconfigurable 6-DoF Cable-Driven Parallel Robot with an Extended Rotational Workspace
Abstract
1 Introduction
2 Prescribed Workspace Analysis
3 Formulation of the Optimization Problem
4 Optimization Results and Reconfigurable CDPR
5 Conclusion
Acknowledgments
References
Author Index

System requirements

Save as PDF Copy link into clipboard

Schweitzer Fachinformationen

Mechanism Design for Robotics

Description

More details

Other editions

Additional editions

Content

System requirements