History of Mechanical Technology and Mechanical Design 2012
Published on 12. April 2012
310 pages
978-3-03813-738-2 (ISBN)
Description
The present volume consists of selected papers from the proceedings of the International Conference on History of Mechanical Technology and Mechanical Design -2012 (ICHMTMD2012). This conference evolved from the China-Japan International Conference on History of Mechanical Technology (CJICHMT).
Volume is indexed by Thomson Reuters CPCI-S (WoS).
More than 100 papers, from Mainland China, Taiwan and Japan were submitted, to the present conference. All of the papers were subjected to peer review by at least two expert referees, and the best papers were selected for publication in this volume.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
More than 100 papers, from Mainland China, Taiwan and Japan were submitted, to the present conference. All of the papers were subjected to peer review by at least two expert referees, and the best papers were selected for publication in this volume.
More details
Series
Language
English
Place of publication
Zurich-Durnten
Switzerland
Target group
Professional and scholarly
Illustrations
Illustrations
File size
50,49 MB
ISBN-13
978-3-03813-738-2 (9783038137382)
DOI
10.4028/b-UW4ywS
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Trans Tech Publications Ltd | Hong Sen Yan | Jian Bin Zhang
History of Mechanical Technology and Mechanical Design 2012
Book
04/2012
Trans Tech Publications Ltd
€215.77
Article exhausted; check different version
Hong Sen Yan | Jian Bin Zhang | Guang Lin Wang
History of Mechanical Technology and Mechanical Design 2012
Software
04/2012
Trans Tech Publications Ltd
€231.69
Shipment within 10-15 days
Content
Preface and Conference Organizers
Historical Development of Reconstruction Designs of Antikythera Mechanism
Reconstruction Study on the Bellow of Blast Furnace in Liao Dynasty - A Case of the Iron Smelting Site at ShuiquanGou, Yanqing in Beijing
A Pragmatic Approach to Reduce Environmental Load in Machining Process
Effect of Friction on Dynamics of Gear System Featuring Confluence Transmission
Cascade Controller Design for Compliant Actuators
Position Error Research of Four-Legged Walking Robot's Swing Leg
Effect of Filling with Adhesive on Solder Alloys Subjected to Random Vibration
Research on Optical Microscope Measuring Method of External Thread Parameters Based on Charge-Couple Device
The Systematic Design and Meshing-Efficiency Analysis of Gear Reducer for Gear-Motor
Structure Analysis and Design of Coal Mine Refuge Chamber
Operation Sequencing Using Genetic Algorithm
Large SAR Antenna Deployable Structure Design and Optimization
Safety Analysis of Tower Crane Based on Fault Tree
The Effects of Bony Structure Simplification Methods on the Biomechanics of Tibiofemoral Joint in Series of Flexion Angles
Dynamic Simulation of the Six Axis Machining Robot for Trajectory Planning in CATIA-LMS
Research Trends of Mechanism and Machine Theory Using Bibliometrics
The Classification of Disposable Mechanical Elements
Dynamic Analysis of Extendible Support Structure Deployment
Investigation of Tool Deflection of Solid Carbide End Mill in Cutting Process
An Experimental Study to Determine the Optimal Sizes for Ball-Valve Micropump Channel
Ejector Influence on Performance of Ammonia Absorption Heat Pump System
Dynamic Analysis and Design of Compliant Mechanisms Using the Finite Element Method
Parts Tolerance Allocation Based on Assembly Clearance Analysis and Product Functional Parameters
A Citrix XenApp and Web Based System for Product Design and Management
Development of Flapping Ornithopters by Precision Injection Molding
Improved Method Based on Fluid Mechanics Analysis for Buoy Gauge Design and Experimental Research
The Research of Linear Rotation-Axis Control Machining CNC Rotary Cam Surface Transformation
Development of KM-Based Multi-Criteria Decision-Making Method for Evaluation of 4-Axis CNC Machine Tool
Inverse Identification of Elastic Constants of Orthotropic Plates Using the Dispersion of Guided Waves and Artical Neural Network
Revival of 1920s Belt-Driven Machine Tools with Virtual Reality
Assembly Unit Partition Based on Theory of Cut-Set
The Design of 8-Link Mechanism of Horse Leg-Like Moving
Research on Automatic Design of Extendable TrussBased on CAD Software
The Research about Energy Consumption and Using Motion Function of Mass Center for Four-Legged Walking Robot
Multi-Dimensional Data Model and Version Control Method for Small-Batch Production
Teaching Assistants Role in the Project-Based Learning Model for Electromechanical Control Engineering
Research on Application of NC Polish-Grinding of Valve Stem and Instantaneous Compensation of Grinding Wheel
Design and Validation of a Structural Flexibility Pedestrian Lower Legform
Measurement of Armature Components' Synthetic Stiffness Based on Torque and Grating Ruler Sensor
The Application of Modal Synthesis Method in the Processing Center Dynamics Analysis
QFD&DFMA Application on an Oil/Water Separation Product
Supporting Structure Optimization of Emulsion Pump Crankshaft
Product Information Modeling and Organization with MBD
The Application of Thermoelectric Cooling Module in the Vehicle's Braking System
Research on Machining Method of Complex Surface Face Gears
Dynamic Modeling for the Impact of Compliant Legged Robot
Deployment Mechanism Design with Behavioral Modeling Based on Pro/Engineer Motion Skeleton
Kinematics Research of 6R Arc Welding Robot Based on Radial Basis Function Neural Network
Curvature Analysis of Conjugate Surfaces via a Tensor Approach
Research on the Formation of Dimensional Chain for Thread Hob of Double-Roller Machine Rolling Thread by Axial Feed
The Motion Control System of Servomotor Based on CAN Bus
Challenge of Model Based Definition Technology to Engineering Graphics Education
The Design of a System to Process Spacecrafts's Mechanical Analysis and Experiment Data
Study on Fine-Boring and Countersinking Processing Technology of Automotive Differential Shell
Dynamic Modeling of Compliant Mechanisms Based on 2R Pseudo-Rigid-Body Model
Simulation on Static and Dynamic Characteristics of Servovalve
Historical Development of Reconstruction Designs of Antikythera Mechanism
Reconstruction Study on the Bellow of Blast Furnace in Liao Dynasty - A Case of the Iron Smelting Site at ShuiquanGou, Yanqing in Beijing
A Pragmatic Approach to Reduce Environmental Load in Machining Process
Effect of Friction on Dynamics of Gear System Featuring Confluence Transmission
Cascade Controller Design for Compliant Actuators
Position Error Research of Four-Legged Walking Robot's Swing Leg
Effect of Filling with Adhesive on Solder Alloys Subjected to Random Vibration
Research on Optical Microscope Measuring Method of External Thread Parameters Based on Charge-Couple Device
The Systematic Design and Meshing-Efficiency Analysis of Gear Reducer for Gear-Motor
Structure Analysis and Design of Coal Mine Refuge Chamber
Operation Sequencing Using Genetic Algorithm
Large SAR Antenna Deployable Structure Design and Optimization
Safety Analysis of Tower Crane Based on Fault Tree
The Effects of Bony Structure Simplification Methods on the Biomechanics of Tibiofemoral Joint in Series of Flexion Angles
Dynamic Simulation of the Six Axis Machining Robot for Trajectory Planning in CATIA-LMS
Research Trends of Mechanism and Machine Theory Using Bibliometrics
The Classification of Disposable Mechanical Elements
Dynamic Analysis of Extendible Support Structure Deployment
Investigation of Tool Deflection of Solid Carbide End Mill in Cutting Process
An Experimental Study to Determine the Optimal Sizes for Ball-Valve Micropump Channel
Ejector Influence on Performance of Ammonia Absorption Heat Pump System
Dynamic Analysis and Design of Compliant Mechanisms Using the Finite Element Method
Parts Tolerance Allocation Based on Assembly Clearance Analysis and Product Functional Parameters
A Citrix XenApp and Web Based System for Product Design and Management
Development of Flapping Ornithopters by Precision Injection Molding
Improved Method Based on Fluid Mechanics Analysis for Buoy Gauge Design and Experimental Research
The Research of Linear Rotation-Axis Control Machining CNC Rotary Cam Surface Transformation
Development of KM-Based Multi-Criteria Decision-Making Method for Evaluation of 4-Axis CNC Machine Tool
Inverse Identification of Elastic Constants of Orthotropic Plates Using the Dispersion of Guided Waves and Artical Neural Network
Revival of 1920s Belt-Driven Machine Tools with Virtual Reality
Assembly Unit Partition Based on Theory of Cut-Set
The Design of 8-Link Mechanism of Horse Leg-Like Moving
Research on Automatic Design of Extendable TrussBased on CAD Software
The Research about Energy Consumption and Using Motion Function of Mass Center for Four-Legged Walking Robot
Multi-Dimensional Data Model and Version Control Method for Small-Batch Production
Teaching Assistants Role in the Project-Based Learning Model for Electromechanical Control Engineering
Research on Application of NC Polish-Grinding of Valve Stem and Instantaneous Compensation of Grinding Wheel
Design and Validation of a Structural Flexibility Pedestrian Lower Legform
Measurement of Armature Components' Synthetic Stiffness Based on Torque and Grating Ruler Sensor
The Application of Modal Synthesis Method in the Processing Center Dynamics Analysis
QFD&DFMA Application on an Oil/Water Separation Product
Supporting Structure Optimization of Emulsion Pump Crankshaft
Product Information Modeling and Organization with MBD
The Application of Thermoelectric Cooling Module in the Vehicle's Braking System
Research on Machining Method of Complex Surface Face Gears
Dynamic Modeling for the Impact of Compliant Legged Robot
Deployment Mechanism Design with Behavioral Modeling Based on Pro/Engineer Motion Skeleton
Kinematics Research of 6R Arc Welding Robot Based on Radial Basis Function Neural Network
Curvature Analysis of Conjugate Surfaces via a Tensor Approach
Research on the Formation of Dimensional Chain for Thread Hob of Double-Roller Machine Rolling Thread by Axial Feed
The Motion Control System of Servomotor Based on CAN Bus
Challenge of Model Based Definition Technology to Engineering Graphics Education
The Design of a System to Process Spacecrafts's Mechanical Analysis and Experiment Data
Study on Fine-Boring and Countersinking Processing Technology of Automotive Differential Shell
Dynamic Modeling of Compliant Mechanisms Based on 2R Pseudo-Rigid-Body Model
Simulation on Static and Dynamic Characteristics of Servovalve
