Materials and Technologies for Protection and Constructions

<ul><li>Preface</li><li>Chapter 1: Structural Metals and Processing Technologies</li><li>Effect of Silica Content on the Surface Quality of Cast Iron in Shell Mould Process</li><li>Temperature of Aluminum Alloy Strip During Casting Using a Vertical Type High Speed Twin Roll Caster</li><li>Thin Wire Casting Using Twin Wheel Caster Equipped with Horizontal Wheels</li><li>Numerical Simulation of CNC Incremental Forming of Straight Wall Parts Based on Model Partition and Non-Steep Surface</li><li>Influence of Different Zoning on Part Thickness in the Multi-Stage Incremental Forming Based on the Extrusion from the Forward and Reverse Side of the Sheet</li><li>Effect of Orbital Welding Parameters on the Weld Geometry</li><li>Chapter 2: Corrosion Properties of Steel Materials</li><li>The Degradation of the most Common Stainless Steels: Real Case Issues</li><li>Study on Corrosion Behavior of Simulated Welding Microstructure of Austenitic Stainless Steel</li><li>Study on Corrosion Tendency Evaluation of Microstructure in Welding Heat Affected Zone of Austenitic Stainless Steel</li><li>Study on Grain Boundary Sensitization in Heat Affected Zone of Austenitic Stainless Steel and its Evaluation Method</li><li>Chapter 3: Properties and Technologies for Polymers and Composites Processing</li><li>Identification of Material Viscoelastic Properties using the Motion of a Rigid Sphere Located at Tissue-Mimicking Material Interface in Response to a Dynamic Force</li><li>Effects of Metal Matrix Composition on the Pre-Sintering Process of Cu-Based Metallic Friction Materials</li><li>Application of Magnetic Abrasive Finishing Process Using Alternating Magnetic Field for Finishing Polychlorotrifluoroethylene Resin</li><li>Chapter 4: Additive Manufacturing</li><li>Copper Tannate (CuTn) Based Coating on 3D Printed Face Masks</li><li>Printability and Warpage Evaluation of Polypropylene/Nano Precipitated Calcium Carbonate Composite Prepared by Extrusion-Based 3D Printing</li><li>Improvement of Isotropic Strength of 3D Printing-Based Self-Healing Capsules by Controlling the Position of Holes</li><li>Chapter 5: Wastewater Treatment</li><li>Photocatalytic Degradation of Allura Red (AR) with TiO₂ Immobilized on Solution Blow Spinning (SBS) - Spun TIPP/PVP Membranes</li><li>Preparation and Characterization of Modified Clay - Application to the Adsorption of an Industrial Dye</li><li>Chapter 6: Density Functional Theory Method for Calculations in Materials Research</li><li>Interaction of C₆₀ with Small Molecules: Adsorption - Inclusion Energy Calculation Using the Density Functional Theory</li><li>Strain Effects on the Band Structures of Monolayer GaN from the Density Functional Theory</li><li>Unveiling Electronic Structure and Spin-Resolve of Bulk Bi₂O₂X (X = S, Se, and Te) Materials: A Computational Study Based-On Density Functional Theory</li><li>Chapter 7: Materials in Construction</li><li>Numerical Simulation of Direct Tensile Test of Reinforced Concrete Using Abaqus Software</li><li>Influence of Temperature and Humidity of the Environment where the Concrete Hardening Takes over on the Efficiency of Surface Microdosis Application</li><li>Specific Aspects of the Study of the Surface Properties of Plywood</li><li>Design and Research of Bituminous Compositions Modified by Rubber Brittle Waste</li><li>Chapter 8: Fire-Resistance of Building Materials</li><li>Experimental Investigations of the Thermal Decomposition of Wood at the Time of the Fire in the Premises of Domestic Buildings</li><li>Fire Protection of Steel with Thermal Insulation Granular Plate Material on Geocement-Based</li><li>Results of Experimental Investigations of Reinforced Concrete Wall Elements According to the Standard Temperature Mode of Fire</li><li>The Improvement of the Method to Determine the Temperature in Steel Reinforced Concrete Slabs in Assessment of their Fire Resistance</li><li>Research of Fire Resistance of Fire Protected Reinforced Concrete Structures</li></ul>