Functional Materials Research
This book aims to collect the up-to-date reports of functional materials research achievements. The book would appeal to researchers who work on functional materials study. The readers of this book could find wide range of topics in functional materials field.
Published on 1. April 2016
1546 pages
978-3-0357-0246-0 (ISBN)
Description
This book aims to collect the up-to-date reports of functional materials research achievements. The book would appeal to researchers who work on functional materials study. The readers of this book could find wide range of topics in functional materials field.
More details
Series
Language
English
Place of publication
Zurich-Durnten
Switzerland
Target group
College/higher education
Professional and scholarly
Illustrations
Illustrations, unspecified
File size
422,84 MB
ISBN-13
978-3-0357-0246-0 (9783035702460)
DOI
10.4028/b-z6ItKV
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Yu Xun Wang | Gui Chun Huang | Linqing Luo
Functional Materials Research
This book aims to collect the up-to-date reports of functional materials research achievements. The book would appeal to researchers who work on functional materials study. The readers of this book could find wide range of topics in functional materials field.
Book
05/2016
Trans Tech Publications Ltd
€643.75
Shipment within 10-15 days
Yu Xun Wang | Gui Chun Huang | Linqing Luo
Functional Materials Research
This book aims to collect the up-to-date reports of functional materials research achievements. The book would appeal to researchers who work on functional materials study. The readers of this book could find wide range of topics in functional materials field.
Software
05/2016
Trans Tech Publications Ltd
€578.27
Shipment within 10-20 days
Persons
Eds. Yuxun Wang, Guichun Huang and Linqing Luo
Content
Preface
Chapter 1: Metallic, Magnetic and Electric Functional Materials
Microwave Absorbing Properties of MnAlFe Magnetic Powder
Cyclic Oxidation Resistance of Hot-Dipping Aluminized Steel
Study on Surface Modification of Micaceous Iron Oxide
Effect of Different Solid-Solution Treatment on Microstructure and Mechanical Properties of Alloy 718
Investigation on Ce Addition on Microstructure and Martensitic Transformation of a Ti51Ni49 Shape Memory Alloy
Effect of Zn Addition on the Microstructure and Properties of Simulated-Brazing 7072Al Alloy
Effects of RE on Precipitation Behaviors of the Inclusions and Magnetic Properties of Non-Oriented Electrical Steel
Fe-Based Sacrificial Anodes for Anti-Corrosion of 310S Stainless Steel
Theoretical Study on the Electronic Structures, Magnetic Properties and Corrosion-Resistant Ability of NinAl (n=1-8, 12) Clusters
The Effects of Pb, Bi on the Anodic Properties of Al-Zn-Ga-In Series Alloy
Contrast between Modification Methods for Magnetism Absorbents
Influence of Compaction Pressure on Magnetic Properties of Sendust Powder Core
Effect of Annealing on the Microstructure and Magnetic Properties of 2J4 Alloy
Corrosion Behavior of 718 Nickel Base Alloy in Acid Saline Solution Containing H2S and CO2
Studies of the Average Valence State of the Transition Metals and the Electrical Properties of LaSr3Fe3-xMnxO10-? (x=0.0-0.8) Mixed Conductors
Microstructure, Texture and Inhibitors of the As-Cast and Hot Rolled Grain-Oriented Silicon Steel by Strip Casting
Influences of Grain Size on Electrochemical Corrosion Behaviors of Nickel-Based Alloy 718
Corrosion Behaviors of Fluoride Treated Cast Magnesium Alloy in Hank's Solution
Effect of Trace Cerium on Microstructures and Mechanical Properties of 690 Mega Pascal Steel
Crystal Structure and Magnetic Property of Novel Ln(III)-Nitronyl Nitroxide Radical Complex
Comparison and Analysis of Sodium Silicate and Epoxy Bonded NdFeB Magnets
Effect of Welding Current on Microstructure and Properties of TIG Welded EW75 Magnesium Alloy
Effect of Two-Step Aging Process on Microstructure and Fracture Toughness of 7085 Aluminum Alloy
Structure-Performance Correlations in Electrochromic Behaviors of Terpyridine-Metal Hybrid Materials
Influence of DC Bias on the Properties of the Piezoelectric Material
Microstructure, Texture and Mechanical Properties of Mg-0.8 Zn-0.3 Gd-0.5 Ca Alloy Sheets
Low-Temperature Annealing on Treated of Pulsating Magnetic Field Fe-Co-M-B-Cu Amorphous
Comprised of the Organization and Performance of Non-Oriented Electrical Steel with Cold and Heat Slab
Study on the Microstructure and Magnetic Domain Struture of the Soft Magentic Alloy 1J50
Effects of Hot Pressing and Deforming on the Microstructure and Properties of NdFeB Magnets
Structural Evolution and Physical Properties of Nano-Crystalline BiFeO3
Effects of Zr on Microstructure and Conductivity of Er Containing Heat-Resistant Aluminum Alloy Used for Wires
Numerical Simulation of Quenching and Pre-Stretching Residual Stress in 7085 Aluminum Alloy Plate
Situation and Development on Soil Corrosion of Metallic Materials of HVDC Power Transmission Project
Chapter 2: Nano and Inorganic Functional Materials
Strain Distribution of Ge/Si Quantum Dots in Array
Synthesis, Characterization and Gas Sensing Properties of Titanium Dioxide Nanoparticles by Sol-Gel Method
Preparation and Characterization of Conjugated Microspheres FeTCPP-SSA-TiO2
PtCo Nanoparticles Supported on Carbon for Hydrolysis of Ammonia Borane
Hydrothermal Synthesis and Photocatalytic Activity of TiO2-ZrO2 Hybrid Composite Microspheres
Preparation and Characterization of a Magnetic Binary System Comprise of ?-Fe2O3 and ?-FeO(OH) Nanoparticles
The Preparation of BaTi4O9 by Sol-Gel Method
Preparation and Electrochemical Properties of Nano Si-C Composite
Advance in the Fabrication of Ordered Ge/Si Nanostructure Array on Si Patterned Substrate by Nanosphere Lithography
Low-Temperature Selective Catalytic Reduction with NH3 over MnOx-CeO2 Catalysts Supported on Nano Tetragonal Zirconia
Preparation and Characterization of Mg-Al/Zn-Al Layered Double Hydroxides Intercalated with Calcein
Recent Research Progress of Carbon Nanotube Arrays Prepared by Plasma Enhanced Chemical Vapor Deposition Method
Kinetics of Carbothermic Reduction of Ilmenite
Synthesis and Application of Ni-M@Silica Yolk-Shell Nanostructures as Versatile Catalytic Materials
The External Crystal Structure and Electronic Structure are Simulated about Ge0.6Si0.4 Quantum Dots
Applications of Ceramic Materials in High Energy Laser Damage
Preparation and Performance of Chiral Polyaniline/Cobalt Ferrite Composites
Preparation and Characterizations of a-Fe2O3 Nanorods and their Properties
Progress on Preparation of InAs Nanowires by Molecular Beam Epitaxy
Dispersion of Nano Self-Cleaning Finishing Agents about Suit Fabric
Effect of Dispersant on Preparation of Barium Strontium Titanate Nanopowders by Microwave Hydrothermal Processing
Fabrication and Magnetic Properties of Fe, Co and Ni Nanotube Arrays
Research on the Ceramic Sintering Grain Growth Model
Study on the Synthesis and Performances of Ultrafine Silver Powder Used as Silicon Solar Cell Front Silver Contacts
The Electronic Structure and Optical Properties of Co,C Co-Doped AlN Nanosheet
Preparation of Aluminum Nitride Power by Direct Nitridization Method with Two Additives
Experimental Study on the Surface Tension of Al2O3-H2O Nanofluid
The Influence Factors on ?-FeOOH Nanosheets Preparation
Characterization of ZrO2/PZT Nanocomposites Ceramics Prepared by the Citrate Precursor Route
Performance and Characterization of Resistance to Ultraviolet Radiation of Vi-POSS-TiO2/EP Nanocomposites
Influence of Polymer Residues on the Double Resonance Process of Bilayer Graphene
Effects of ?-Ray Irradiation on the Properties of Nano-Hydroxyapatite/Polyurethane Composite Porous Scaffolds
Microstructure Evolution of Hybrid TiO2 Nanowire-Nanotube Structure Fabricated by Anodization
Graphene Nucleation at Front Ends of Copper Twin Crystal
Biosynthesis Silver Nanoparticles Using Bacillus Amyloliquefaciens Zxw01 and Research on Synthesis Mechanism
Experimental Study and Thermodynamic Calculation of BaO-Lu2O3 Binary System
Study of the Mechanical Deformation of Transforming Nanowires Constrained in Metal Matrix
Effects of Various Fluxes on Synthesis of Deep Red Emitting CaAl12O19:Mn4+ Phosphors
A General Process for In Situ Formation of Iron-Matrix Composites Reinforced by Carbide Ceramic
General Process for In Situ Formation of Iron-Matrix Surface Composites Reinforced by Carbide Ceramic
Influence of Ce on Microstructures and Mechanical Properties of HMn64-8-5-1.5 Brass
Synthesis, Characterization and Suspension Stability of Al2O3 Nanoparticles Functionalized by Polyurethane
Magnetic Nanoparticles Supported Acidic Ionic Liquid as a Highly Active and Reusable Catalyst for Esterification
Low-Cost Preparation of Graphene Quantum Dots by Liquid-Phase Exfoliation of Carbon Fibers
Preparation and Photoluminescence Properties of Green-Emitting LiYb1-xTbx(MoO4)2(x = 0.01-1) Phosphors
Improved Dehydriding Properties of NaMgH3 Perovskite Hydride by Addition of Graphitic Carbon Nitride
Effect of Different C Aids on the Formation of ZnO by Microwave Solid Reaction
Industrial Synthesis of Whisker Carbon Nanotubes
Direct Visualization of Zinc Oxide Domains and Interfaces in Natural Rubber Vulcanizate by Nanomechanical Mapping
Preparation and Characterization of Nanocrystalline La2Ti2O7 by Microwave Assisted Process
Research and Analysis on Dispersing Performance of Nano-TiO2 Powder in Water
Preparation of LaVO4 by Microwave Process and its Photocatalytic Activity
Separation of Particles of Rare Earth Oxides by Dielectrophoresis
Oxidation of Formaldehyde over Birnessite-Type Manganese Oxides at Room-Temperature
Research Development in Synthesis Methods of Silver Nanowires
Synthesis and Characterization of Iron Oxide/Carbon Microspheres Composite Material
Preparation and Electromagnetic Properties of CIP/ZnO Composites
The Fabrication of One-Dimensional BaAl12O19:Mn2+ Phosphors by Electrospinning Method
Investigation on the Reduction of Ilmenite at Lower Temperatures
Controlled Synthesis and Ceramization of Well-Defined Fe/Si/C Ceramic Precursors by Living Anionic Polymerization
Synthesis, Structure and Spectral Properties of Eu:YGO Phosphor Powders
Preparation and Characterization of Monolithic Al2O3 Aerogels
Preparation and Characterization of Thermally Expandable Microspheres
Research on Grain Refinement Process and Microstructure of Ultra-High Purity Copper Used for Integrated Circuit
Chapter 3: Organic and Polymer Functional Materials
Modulated Synthesis of UiO-67 for High Resistance to CH2Cl2
Preparation and Thermal Performance of Poly(Methyl Methacrylate)/Binary Alkane-Alcohol Organic Eutectic Microcapsules as Phase Change Materials for Cold Storage
Preparation of Ba3In2(OH)12 and its Photocatalytic Performance
Review of Polymer Surface Modification Method
Evaluation of Thermal Degradation of High Density Polyethylene by Principal Component Analysis
Preparation and Organic Solvent Resistance of Water Soluble Hydantoin Epoxy/Organic Titanium Chelate Composite Coatings
Promoting Effect of Chemical Self-Assembled Polyaniline Nanofibers and Electro-Polymerized Polyaniline in Formic Acid Electro-Oxidizing Reaction
The Preparation of Comb Polymer Rotaxanes and Study on their Self-Assembly Behavior
Preparation and Performance Research of New High Toughness EVA Material
Study on the Synthesis and Properties of MAH-POE/LMW-EP/PP/CaCO3 Quadruple Composites
Preparation and Application of Colemanite Matrix Complex Flame Retardant
Thermal Properties of Poly(Lactic Acid) Modified Poly(3-Hydroxybutyrate-co-4-Hydroxbutyrate)
Reduce the Leakage Current of High Voltage Polymer Ta Electrolyte Capacitors
Development and Adsorption Properties for a Novel Lithium Ion-Sieve
Effects of Modified-Phenolic on the Tribological Properties of Carbon Fiber Reinforced Phenolic Friction Materials
Effect of Electric-Field on Spin Injection Efficiency in the Organic Semiconductors
Study on the Doped 1-Bromo-4-Nitrobenzene at Active Layer in Improving the Performance of Organic Polymer Solar Cells
Progress of Graphene-Based Hydrogel
Research of Atom Transfer Radical Polymerization of Methyl Polypropylene
Study on the Hydrophobic Modification of Ammonium Polyphosphate and its Application in Flame Retardant Polypropylene
Synthesis of Iron-Containing Preceramic Polymer and Preparation of Fe/Si/C Ceramics via Precursor-Derived Method
Studies on Photoreactive and Fluorescence Properties of Polymers Composed of 3-Hydroxycinnamic Acid and Lactic Acid
Substrate Polarity Effects on the Interface Electronic Structure in Organic Light Emitting Diodes
Synthesis and Characterization of Phenanthroimidazole Derivatives as Light-Emitting and Ambipolar Materials
Preparation and Nonlinear Optical Properties of Poly(2,3-Dimethylaniline) Grafted Reduced Graphene Oxide
High Sensitive and Selective Acetone Gas Sensor Using Molecular Imprinting Technique Based on Ag-LaFeO3
Design Principles of Surfactants for Polymerization in Supercritical CO2
Synthesis and Properties of a Novel Bipolar Host Material Based on 1,2,4-Oxadiazole for Green Phosphorescent OLEDs
Study on Surface Modification of Mica Pearl Pigment with Stearic Acid
Chapter 4: Functional Materials for Storage and Conversion of Energy
Using Localized Impedance Spectroscopy to Study the Effect of Loading Potential Variation on DMFC Anode Performance
First Principles Calculations of Double Metal Amidoboranes
The Chloride Annealing for Back Contact Layer Free CdTe Solar Cells
Facile Preparation and Electrochemical Performances of LiMn2O4/Li1.2(Mn0.56Ni0.16Co0.08)O2 Blend Cathode Materials for Lithium Ion Battery
Influence of Carbon Inclusion on the Electrochemical Performances for Si Using as the Lithium-Ion Battery Anode
The Influence of Particle Characteristic of Manganese Dioxide on Performance of Spinel Lithium Manganese Oxide
Preparation and Performance Characterization of a Large Area ScSZ Electrolyte Substrate
ZIF-8 Derived Graphene-Based Nitrogen-Doped Porous Carbonas Highly Efficient Supercapacitor Electrodes
Microwave Synthesis of MOFs/Graphene Oxide Composites and Hydrogen Storage Properties
Study on Al-Li3AlH6-CaO Composite for Hydrogen Production Performance
A Facile Self-Assembly Synthesis of Whiskey ZnFe2O4 as Superior Anode Materials for Lithium-Ion Batteries
Well-Designed Spherical Morphology Li1.2Mn0.54Ni0.13Co0.13O2 as Superior Cathode Materials for Lithium-Ion Batteries
LiBH4 Confined in Nitrogen-Doped Ordered Mesoporous Carbons for Hydrogen Storage
The Synthesis of Nitrogen-Doped Mesoporous Carbon Spheres for Hydrogen Storage
Hydrothermal Synthesis of MnO2-Loaded Porous Carbons for Supercapacitors
The Effect of AlCl3 and Ti on Hydrogen Storage Performance of 4MgH2-Li3AlH6 System
Microstructures and Energy Storage Properties of Sr0.5Ba0.5Nb2O6 Ceramics with BaO-B2O3-SiO2 Glass Addition
Enhanced Energy Storage Properties of La and Zr Modified Bi0.5(Na0.82K0.18)0.5TiO3 Based Ceramics
Synthesis and Electrochemical Performance of Tin-Copper Nanocomposites as a Superior Anode for Lithium-Ion Batteries
Efficiency Enhancement of ZnO Nanocrystalline Dye-Sensitized Solar Cells by Post-Treatment
Optimized Synthetic Conditions of 0.6Li2MnO3?0.4LiNi1/3Co1/3Mn1/3O2 Cathode Materials for Lithium Batteries via Sol-Gel Method
Facile Synthesis of CoSe2 Nanoparticles and their Electrocatalytic Performance for Hydrogen Evolution Reaction
Homogeneous Growth of Ni(OH)2 Nanoparticle on Graphene Nanosheet for High-Performance Supercapacitor Electrode Material
Study on Preparation of Si/C Anode Material by Spray Dying and Carbonization
Semiconductor Nanocrystals for Photovoltaic Devices
The Variable Super-Capacitor with Nano-Diamond Film Electrode
Design and Experiment of Rare Earth Giant Magnetostrictive Piston Pump
SiC/SiO2 Coating on Matrix Graphite Spheres of HTR Fuel Element Produced by a Two-Step Pack Cementation/High-Temperature Oxidation Process
Electrochemical Performance of Li4Ti5O12/TiO2/Li0.4TiO2/C Composite Prepared by the Electrospinning Method Using as Lithium Battery Anode Material
The Preparation of Pure and Phosphrous-Doped La2Mo2O9 Oxide Ion Conductor by a Modified Precipitation Method
Natural Convective Heat Transfer Characteristics of the Bundle Heat Exchanger in the Latent Heat Microcapsulated Phase Change Material Slurry
Chapter 5: Thin Film, Membrane and Coating Materials
Novel pH-Sensitive Poly(Vinyl Alcohol) Based Polyampholyte as Pervaporation Membrane
The Effect of Oxidized Time to Structure and Composition of Micro-Arc Oxidization Ceramic Coating of Pure Titanium
The Effect of Current Density to Surface Morphology and Component of Micro-Arc Oxidization Ceramic Coating of Pure Titanium
Thermal Shock Resistance of Plasma Sprayed Multi-Layered Functionally Graded Cr3C2-NiCr Coatings
Research on the Raman Spectrum of the MPCVD Diamond Films
Study of Pre-Dispersive Technology of Brucite Fiber and the Composite Insulation Board
Influence of Deposition Mode in Reactively Sputtered ZnO Underlayer on Thermal Stability of Thin Silver Films
A Novel Approach on Preparation and Characterization of Thermosetting Fluorinated Polyurethane Coatings
A Comparison of Diamond-Like Carbon Films Properties Obtained by Plasma Enhanced Chemical Vapor Deposition and Electro-Deposition
Preparation of CPC-Fe3O4-MMT/PEG Magnetic Films via Layer-by-Layer Assembly under the Assistance of Magnetic Field
Study on the Preparation of PAMAS/PEO Fibrous Membranes by Electrospinning
Tribological Investigation of Guanidinium Ionic Liquids as Lubricants for Steel/Bronze Contacts
Effect of Negative Duty Cycle on Micro-Arc Oxidation Coating of Titanium Alloy
Millimeter Wave Absorbing Electromagnetic Properties of ZnO Whisker/Silicon Resin Coating Material
Preparation and Characterization of Boron Controlled-Release Film as a Potential Coating Material
Investigation on the Effect of the Substrate Temperature on the Photoelectric Properties of the Ga Doped ZnO Film
Effect of ?-SiC Particle Concentration on the Properties of the Duplex Ni-P/Ni-P-?-SiC Coating
Fabrication of Transparent Hydrophilic Nanosized TiO2 Films via Layer-by-Layer Self-Assembly
The Effect of Sintering Temperature on the Crystal Structure and Luminescence Properties of Pr:LSO Polycrystalline Films
Effect of Explosive Charge on 65Cr3C2-35NiCr Coatings Fabricated by D-Gun Technology
Influence of Pulse Frequency on the Structure and Oxidation Resistance of AlPO4 Ceramics Coating and its Deposition Dynamics
Effect of Assisted-Ion-Beam Gases on the Structure of Amorphous Silicon Thin Films Prepared by Ion-Beam-Assisted Sputtering
Structure, Composition and Adhesion Strength of Hf Coatings Deposited on Mo Substrate by Ion Beam Sputtering
Preparation and Photocatalytic Properties of Terrace Composite SnO2/TiO2:Cu2+ Film
Preparation and Photoelectric Properties of Nb/SnO2 Composite Thin Films
Highly Conductive and Transparent PEDOT/PSS Thin Films with Large Area Prepared by Bar-Coating Method
The Influence of C2H2 Flow Rate on the Composition, Structural and Properties of the Ni/?-C:H Films Deposited by FCVA
The Performance of Plasma and Multi-Physical Fields in DC Arc Plasma Reactor for CVD Diamond Film
Development of a Temperature and Pressure-Controlled Corrosion Test Vessel
Chapter 6: Functional Materials for Biomedical Engineering and Biotechnologies
Hydroxyapatite-Poly(Vinyl Alcohol)-Sodium Alginate Porous Hydrogels with Poly(Vinyl Alcohol) Surface Layer Used for Articular Cartilage Repair
Preparation of Slow-Release Potash
Research on Mechanical and Corrosion Properties of Ti-Microalloyed Biomedical Cobalt-Based Alloy
Progress in Fractionation Processes of Lignocellulosic Biomass for Biorefinery: A Review
Photoinduced Microencapsulation of Microcapsules Containing n-Octadecane with P(APUA) and P(AMA) Shell
PGA Fiber Reinforced Calcium Aluminate Cement for Orthopaedic Application
Research Progress in Cellulose Extraction, Modification and Application
Analysis of Solvent Properties of Mandarin Oil
Preparation and Blood Compatibility of Multilayers on the Surface of Medical NiTi Alloy
Bioactive and Antibacterial Ag-AgCl-TiO2 Coating on Titanium Implants
Cell Compatibility of the Micro-Arc Oxidized Surface of Large Plastic Deformed TA2 In Vitro
Preparation of Three Modified Natural Zeolite Powders and Antibacterial Properties of Antibacterial Paper Prepared Using them as Fillers
Analysis and Research of GMM Bone Conduction Pronunciation Vibrator Output Characteristics
Effect of Nano Silver on Inducement of Differentiation of Neural Stem Cells of SD Rats
Synthesis and Characterization of Zeolitic Imidazolate Framework-8@Sodalite Composite Particles
A New Solvent for the Industrial Production of Cellulose Fibers: Quaternary Ammonium Acetate
Low-Power Triplet-Triplet Annihilation Upconversion with a New Anthracene Derivatives
Preparation and Properties Characterization of Modified Chitosan Composited Hemostatic Materials
Preparation and Performance Research of Hemostatic Powder of Chitosan Mixed with Scutellaria baicalensis
Preparation and Performance Characterization of Hemostatic Materials
Optimal Design and Simulation for a Bio-Inspired Micromixer Based on Blood Transport in Vessel
Preparation, Corrosion and Cytocompatability In Vitro of Fluoride-Coated Mg-Zn-Zr Alloy
The Preparation and Characterization of Magnesium Oxide Whisker
Effects of Silver Nanoparticles on the In Vitro Culture and Differentiation of Human Bone Marrow-Derived Mesenchymal Cells
Protein Release and Biological Evaluation of Bio-Inspired Chitosan-Based Nano-Gels
Study on the Preparation and Performance of Carboxymethyl Chitosan Calcium and Carboxymethyl Chitosan Zinc Composite Materials
Corrosion Resistance of Mg-4Zn Alloy with Amorphous Micro-Arc Oxidation Coating in Simulated Body Fluid
Chapter 7: Environment and Building Functional Materials
Three-Point Bending Shear Stress of Wooden Sandwich Composite
Study on the Removal of Pb2+, Cu2+, and Cd2+ from Wastewater Using Modified Stilbite
Fabrication of Ultra-Low Density, High Surface Area Carbon Aerogels and their Application in Supercapacitors
A Innovative Method for Evaluating Basswood Pyrolysis Kinetics
Simulation and Optimization of Cement - Slag Gradation with Limestone Powder
Review on Development and Application of Gelled Material Filling Mined-Out Area
Carbon Felt Properties of Pyrolytic Carbon Felt Direct Thermal CVD
Effect of Supplementary Curing after Steam-Curing on Performance of Concrete
Numerical and Experimental Investigation of Piezoresistance of Asphalt Concrete Containing Graphite
A Study on the Preparation of Epoxy - Modified Polyurethane Foam and its Adhesive Properties
The Steel Slag Fly Ash Foamed Concrete Thermal Properties
Study on the Pore Size Distribution of the Bicomponent Spunbond Nonwoven Geotextiles
Resistance of Straw-Geopolymer Materials to Acid and Alkali Attack
Preparation and Properties of High-Performance Concrete with Ceramic Coarse Aggregate
Influence of Heat Pre-Treatment on Washing Pre-Treated MSWI Fly Ash Cementitious Activity
Progress in BiVO4 Photocatalyst under Visible Light
Modulus Parameter Analysis and Calculation of Steel Deck Asphalt Pavement Material
Research on Properties of the Concrete with Waste Rubber Powder
Facile Synthesis of Phosphogypsum-Based Whiskers by Low Temperature Hydrothermal Route with CTAB Addition
Low-Cost Preparation of SBA-15 Silica Molecular Sieve and High Humidity Sensing Property in a Wide Range of Relative Humidity
Preparation of HTLcs from Magnesium Desulfurization Residues and their Catalytic Performance in Degradation of Waste Polyester
Study on the Drying Shrinkage Property of Magnesium Phosphate Cement
Preparation of Bi1-xLaxVO4 and its Photocatalytic Degradation on Rhodamine B
Calcium Sulphate Whisker Reinforced Plasterboard Flexural Performance Research
Fabrication of Ultra Low-Density Binderless Sandwiching Materials by Rapid Steam Injection
Test and Analysis on Asphalt Content for Fatigue Performance of Polyester Fiber Asphalt Concrete
Preparation of SnO2-TiO2/Zeolite Y Composites with Enhanced Photocatalytic Activity
Chapter 1: Metallic, Magnetic and Electric Functional Materials
Microwave Absorbing Properties of MnAlFe Magnetic Powder
Cyclic Oxidation Resistance of Hot-Dipping Aluminized Steel
Study on Surface Modification of Micaceous Iron Oxide
Effect of Different Solid-Solution Treatment on Microstructure and Mechanical Properties of Alloy 718
Investigation on Ce Addition on Microstructure and Martensitic Transformation of a Ti51Ni49 Shape Memory Alloy
Effect of Zn Addition on the Microstructure and Properties of Simulated-Brazing 7072Al Alloy
Effects of RE on Precipitation Behaviors of the Inclusions and Magnetic Properties of Non-Oriented Electrical Steel
Fe-Based Sacrificial Anodes for Anti-Corrosion of 310S Stainless Steel
Theoretical Study on the Electronic Structures, Magnetic Properties and Corrosion-Resistant Ability of NinAl (n=1-8, 12) Clusters
The Effects of Pb, Bi on the Anodic Properties of Al-Zn-Ga-In Series Alloy
Contrast between Modification Methods for Magnetism Absorbents
Influence of Compaction Pressure on Magnetic Properties of Sendust Powder Core
Effect of Annealing on the Microstructure and Magnetic Properties of 2J4 Alloy
Corrosion Behavior of 718 Nickel Base Alloy in Acid Saline Solution Containing H2S and CO2
Studies of the Average Valence State of the Transition Metals and the Electrical Properties of LaSr3Fe3-xMnxO10-? (x=0.0-0.8) Mixed Conductors
Microstructure, Texture and Inhibitors of the As-Cast and Hot Rolled Grain-Oriented Silicon Steel by Strip Casting
Influences of Grain Size on Electrochemical Corrosion Behaviors of Nickel-Based Alloy 718
Corrosion Behaviors of Fluoride Treated Cast Magnesium Alloy in Hank's Solution
Effect of Trace Cerium on Microstructures and Mechanical Properties of 690 Mega Pascal Steel
Crystal Structure and Magnetic Property of Novel Ln(III)-Nitronyl Nitroxide Radical Complex
Comparison and Analysis of Sodium Silicate and Epoxy Bonded NdFeB Magnets
Effect of Welding Current on Microstructure and Properties of TIG Welded EW75 Magnesium Alloy
Effect of Two-Step Aging Process on Microstructure and Fracture Toughness of 7085 Aluminum Alloy
Structure-Performance Correlations in Electrochromic Behaviors of Terpyridine-Metal Hybrid Materials
Influence of DC Bias on the Properties of the Piezoelectric Material
Microstructure, Texture and Mechanical Properties of Mg-0.8 Zn-0.3 Gd-0.5 Ca Alloy Sheets
Low-Temperature Annealing on Treated of Pulsating Magnetic Field Fe-Co-M-B-Cu Amorphous
Comprised of the Organization and Performance of Non-Oriented Electrical Steel with Cold and Heat Slab
Study on the Microstructure and Magnetic Domain Struture of the Soft Magentic Alloy 1J50
Effects of Hot Pressing and Deforming on the Microstructure and Properties of NdFeB Magnets
Structural Evolution and Physical Properties of Nano-Crystalline BiFeO3
Effects of Zr on Microstructure and Conductivity of Er Containing Heat-Resistant Aluminum Alloy Used for Wires
Numerical Simulation of Quenching and Pre-Stretching Residual Stress in 7085 Aluminum Alloy Plate
Situation and Development on Soil Corrosion of Metallic Materials of HVDC Power Transmission Project
Chapter 2: Nano and Inorganic Functional Materials
Strain Distribution of Ge/Si Quantum Dots in Array
Synthesis, Characterization and Gas Sensing Properties of Titanium Dioxide Nanoparticles by Sol-Gel Method
Preparation and Characterization of Conjugated Microspheres FeTCPP-SSA-TiO2
PtCo Nanoparticles Supported on Carbon for Hydrolysis of Ammonia Borane
Hydrothermal Synthesis and Photocatalytic Activity of TiO2-ZrO2 Hybrid Composite Microspheres
Preparation and Characterization of a Magnetic Binary System Comprise of ?-Fe2O3 and ?-FeO(OH) Nanoparticles
The Preparation of BaTi4O9 by Sol-Gel Method
Preparation and Electrochemical Properties of Nano Si-C Composite
Advance in the Fabrication of Ordered Ge/Si Nanostructure Array on Si Patterned Substrate by Nanosphere Lithography
Low-Temperature Selective Catalytic Reduction with NH3 over MnOx-CeO2 Catalysts Supported on Nano Tetragonal Zirconia
Preparation and Characterization of Mg-Al/Zn-Al Layered Double Hydroxides Intercalated with Calcein
Recent Research Progress of Carbon Nanotube Arrays Prepared by Plasma Enhanced Chemical Vapor Deposition Method
Kinetics of Carbothermic Reduction of Ilmenite
Synthesis and Application of Ni-M@Silica Yolk-Shell Nanostructures as Versatile Catalytic Materials
The External Crystal Structure and Electronic Structure are Simulated about Ge0.6Si0.4 Quantum Dots
Applications of Ceramic Materials in High Energy Laser Damage
Preparation and Performance of Chiral Polyaniline/Cobalt Ferrite Composites
Preparation and Characterizations of a-Fe2O3 Nanorods and their Properties
Progress on Preparation of InAs Nanowires by Molecular Beam Epitaxy
Dispersion of Nano Self-Cleaning Finishing Agents about Suit Fabric
Effect of Dispersant on Preparation of Barium Strontium Titanate Nanopowders by Microwave Hydrothermal Processing
Fabrication and Magnetic Properties of Fe, Co and Ni Nanotube Arrays
Research on the Ceramic Sintering Grain Growth Model
Study on the Synthesis and Performances of Ultrafine Silver Powder Used as Silicon Solar Cell Front Silver Contacts
The Electronic Structure and Optical Properties of Co,C Co-Doped AlN Nanosheet
Preparation of Aluminum Nitride Power by Direct Nitridization Method with Two Additives
Experimental Study on the Surface Tension of Al2O3-H2O Nanofluid
The Influence Factors on ?-FeOOH Nanosheets Preparation
Characterization of ZrO2/PZT Nanocomposites Ceramics Prepared by the Citrate Precursor Route
Performance and Characterization of Resistance to Ultraviolet Radiation of Vi-POSS-TiO2/EP Nanocomposites
Influence of Polymer Residues on the Double Resonance Process of Bilayer Graphene
Effects of ?-Ray Irradiation on the Properties of Nano-Hydroxyapatite/Polyurethane Composite Porous Scaffolds
Microstructure Evolution of Hybrid TiO2 Nanowire-Nanotube Structure Fabricated by Anodization
Graphene Nucleation at Front Ends of Copper Twin Crystal
Biosynthesis Silver Nanoparticles Using Bacillus Amyloliquefaciens Zxw01 and Research on Synthesis Mechanism
Experimental Study and Thermodynamic Calculation of BaO-Lu2O3 Binary System
Study of the Mechanical Deformation of Transforming Nanowires Constrained in Metal Matrix
Effects of Various Fluxes on Synthesis of Deep Red Emitting CaAl12O19:Mn4+ Phosphors
A General Process for In Situ Formation of Iron-Matrix Composites Reinforced by Carbide Ceramic
General Process for In Situ Formation of Iron-Matrix Surface Composites Reinforced by Carbide Ceramic
Influence of Ce on Microstructures and Mechanical Properties of HMn64-8-5-1.5 Brass
Synthesis, Characterization and Suspension Stability of Al2O3 Nanoparticles Functionalized by Polyurethane
Magnetic Nanoparticles Supported Acidic Ionic Liquid as a Highly Active and Reusable Catalyst for Esterification
Low-Cost Preparation of Graphene Quantum Dots by Liquid-Phase Exfoliation of Carbon Fibers
Preparation and Photoluminescence Properties of Green-Emitting LiYb1-xTbx(MoO4)2(x = 0.01-1) Phosphors
Improved Dehydriding Properties of NaMgH3 Perovskite Hydride by Addition of Graphitic Carbon Nitride
Effect of Different C Aids on the Formation of ZnO by Microwave Solid Reaction
Industrial Synthesis of Whisker Carbon Nanotubes
Direct Visualization of Zinc Oxide Domains and Interfaces in Natural Rubber Vulcanizate by Nanomechanical Mapping
Preparation and Characterization of Nanocrystalline La2Ti2O7 by Microwave Assisted Process
Research and Analysis on Dispersing Performance of Nano-TiO2 Powder in Water
Preparation of LaVO4 by Microwave Process and its Photocatalytic Activity
Separation of Particles of Rare Earth Oxides by Dielectrophoresis
Oxidation of Formaldehyde over Birnessite-Type Manganese Oxides at Room-Temperature
Research Development in Synthesis Methods of Silver Nanowires
Synthesis and Characterization of Iron Oxide/Carbon Microspheres Composite Material
Preparation and Electromagnetic Properties of CIP/ZnO Composites
The Fabrication of One-Dimensional BaAl12O19:Mn2+ Phosphors by Electrospinning Method
Investigation on the Reduction of Ilmenite at Lower Temperatures
Controlled Synthesis and Ceramization of Well-Defined Fe/Si/C Ceramic Precursors by Living Anionic Polymerization
Synthesis, Structure and Spectral Properties of Eu:YGO Phosphor Powders
Preparation and Characterization of Monolithic Al2O3 Aerogels
Preparation and Characterization of Thermally Expandable Microspheres
Research on Grain Refinement Process and Microstructure of Ultra-High Purity Copper Used for Integrated Circuit
Chapter 3: Organic and Polymer Functional Materials
Modulated Synthesis of UiO-67 for High Resistance to CH2Cl2
Preparation and Thermal Performance of Poly(Methyl Methacrylate)/Binary Alkane-Alcohol Organic Eutectic Microcapsules as Phase Change Materials for Cold Storage
Preparation of Ba3In2(OH)12 and its Photocatalytic Performance
Review of Polymer Surface Modification Method
Evaluation of Thermal Degradation of High Density Polyethylene by Principal Component Analysis
Preparation and Organic Solvent Resistance of Water Soluble Hydantoin Epoxy/Organic Titanium Chelate Composite Coatings
Promoting Effect of Chemical Self-Assembled Polyaniline Nanofibers and Electro-Polymerized Polyaniline in Formic Acid Electro-Oxidizing Reaction
The Preparation of Comb Polymer Rotaxanes and Study on their Self-Assembly Behavior
Preparation and Performance Research of New High Toughness EVA Material
Study on the Synthesis and Properties of MAH-POE/LMW-EP/PP/CaCO3 Quadruple Composites
Preparation and Application of Colemanite Matrix Complex Flame Retardant
Thermal Properties of Poly(Lactic Acid) Modified Poly(3-Hydroxybutyrate-co-4-Hydroxbutyrate)
Reduce the Leakage Current of High Voltage Polymer Ta Electrolyte Capacitors
Development and Adsorption Properties for a Novel Lithium Ion-Sieve
Effects of Modified-Phenolic on the Tribological Properties of Carbon Fiber Reinforced Phenolic Friction Materials
Effect of Electric-Field on Spin Injection Efficiency in the Organic Semiconductors
Study on the Doped 1-Bromo-4-Nitrobenzene at Active Layer in Improving the Performance of Organic Polymer Solar Cells
Progress of Graphene-Based Hydrogel
Research of Atom Transfer Radical Polymerization of Methyl Polypropylene
Study on the Hydrophobic Modification of Ammonium Polyphosphate and its Application in Flame Retardant Polypropylene
Synthesis of Iron-Containing Preceramic Polymer and Preparation of Fe/Si/C Ceramics via Precursor-Derived Method
Studies on Photoreactive and Fluorescence Properties of Polymers Composed of 3-Hydroxycinnamic Acid and Lactic Acid
Substrate Polarity Effects on the Interface Electronic Structure in Organic Light Emitting Diodes
Synthesis and Characterization of Phenanthroimidazole Derivatives as Light-Emitting and Ambipolar Materials
Preparation and Nonlinear Optical Properties of Poly(2,3-Dimethylaniline) Grafted Reduced Graphene Oxide
High Sensitive and Selective Acetone Gas Sensor Using Molecular Imprinting Technique Based on Ag-LaFeO3
Design Principles of Surfactants for Polymerization in Supercritical CO2
Synthesis and Properties of a Novel Bipolar Host Material Based on 1,2,4-Oxadiazole for Green Phosphorescent OLEDs
Study on Surface Modification of Mica Pearl Pigment with Stearic Acid
Chapter 4: Functional Materials for Storage and Conversion of Energy
Using Localized Impedance Spectroscopy to Study the Effect of Loading Potential Variation on DMFC Anode Performance
First Principles Calculations of Double Metal Amidoboranes
The Chloride Annealing for Back Contact Layer Free CdTe Solar Cells
Facile Preparation and Electrochemical Performances of LiMn2O4/Li1.2(Mn0.56Ni0.16Co0.08)O2 Blend Cathode Materials for Lithium Ion Battery
Influence of Carbon Inclusion on the Electrochemical Performances for Si Using as the Lithium-Ion Battery Anode
The Influence of Particle Characteristic of Manganese Dioxide on Performance of Spinel Lithium Manganese Oxide
Preparation and Performance Characterization of a Large Area ScSZ Electrolyte Substrate
ZIF-8 Derived Graphene-Based Nitrogen-Doped Porous Carbonas Highly Efficient Supercapacitor Electrodes
Microwave Synthesis of MOFs/Graphene Oxide Composites and Hydrogen Storage Properties
Study on Al-Li3AlH6-CaO Composite for Hydrogen Production Performance
A Facile Self-Assembly Synthesis of Whiskey ZnFe2O4 as Superior Anode Materials for Lithium-Ion Batteries
Well-Designed Spherical Morphology Li1.2Mn0.54Ni0.13Co0.13O2 as Superior Cathode Materials for Lithium-Ion Batteries
LiBH4 Confined in Nitrogen-Doped Ordered Mesoporous Carbons for Hydrogen Storage
The Synthesis of Nitrogen-Doped Mesoporous Carbon Spheres for Hydrogen Storage
Hydrothermal Synthesis of MnO2-Loaded Porous Carbons for Supercapacitors
The Effect of AlCl3 and Ti on Hydrogen Storage Performance of 4MgH2-Li3AlH6 System
Microstructures and Energy Storage Properties of Sr0.5Ba0.5Nb2O6 Ceramics with BaO-B2O3-SiO2 Glass Addition
Enhanced Energy Storage Properties of La and Zr Modified Bi0.5(Na0.82K0.18)0.5TiO3 Based Ceramics
Synthesis and Electrochemical Performance of Tin-Copper Nanocomposites as a Superior Anode for Lithium-Ion Batteries
Efficiency Enhancement of ZnO Nanocrystalline Dye-Sensitized Solar Cells by Post-Treatment
Optimized Synthetic Conditions of 0.6Li2MnO3?0.4LiNi1/3Co1/3Mn1/3O2 Cathode Materials for Lithium Batteries via Sol-Gel Method
Facile Synthesis of CoSe2 Nanoparticles and their Electrocatalytic Performance for Hydrogen Evolution Reaction
Homogeneous Growth of Ni(OH)2 Nanoparticle on Graphene Nanosheet for High-Performance Supercapacitor Electrode Material
Study on Preparation of Si/C Anode Material by Spray Dying and Carbonization
Semiconductor Nanocrystals for Photovoltaic Devices
The Variable Super-Capacitor with Nano-Diamond Film Electrode
Design and Experiment of Rare Earth Giant Magnetostrictive Piston Pump
SiC/SiO2 Coating on Matrix Graphite Spheres of HTR Fuel Element Produced by a Two-Step Pack Cementation/High-Temperature Oxidation Process
Electrochemical Performance of Li4Ti5O12/TiO2/Li0.4TiO2/C Composite Prepared by the Electrospinning Method Using as Lithium Battery Anode Material
The Preparation of Pure and Phosphrous-Doped La2Mo2O9 Oxide Ion Conductor by a Modified Precipitation Method
Natural Convective Heat Transfer Characteristics of the Bundle Heat Exchanger in the Latent Heat Microcapsulated Phase Change Material Slurry
Chapter 5: Thin Film, Membrane and Coating Materials
Novel pH-Sensitive Poly(Vinyl Alcohol) Based Polyampholyte as Pervaporation Membrane
The Effect of Oxidized Time to Structure and Composition of Micro-Arc Oxidization Ceramic Coating of Pure Titanium
The Effect of Current Density to Surface Morphology and Component of Micro-Arc Oxidization Ceramic Coating of Pure Titanium
Thermal Shock Resistance of Plasma Sprayed Multi-Layered Functionally Graded Cr3C2-NiCr Coatings
Research on the Raman Spectrum of the MPCVD Diamond Films
Study of Pre-Dispersive Technology of Brucite Fiber and the Composite Insulation Board
Influence of Deposition Mode in Reactively Sputtered ZnO Underlayer on Thermal Stability of Thin Silver Films
A Novel Approach on Preparation and Characterization of Thermosetting Fluorinated Polyurethane Coatings
A Comparison of Diamond-Like Carbon Films Properties Obtained by Plasma Enhanced Chemical Vapor Deposition and Electro-Deposition
Preparation of CPC-Fe3O4-MMT/PEG Magnetic Films via Layer-by-Layer Assembly under the Assistance of Magnetic Field
Study on the Preparation of PAMAS/PEO Fibrous Membranes by Electrospinning
Tribological Investigation of Guanidinium Ionic Liquids as Lubricants for Steel/Bronze Contacts
Effect of Negative Duty Cycle on Micro-Arc Oxidation Coating of Titanium Alloy
Millimeter Wave Absorbing Electromagnetic Properties of ZnO Whisker/Silicon Resin Coating Material
Preparation and Characterization of Boron Controlled-Release Film as a Potential Coating Material
Investigation on the Effect of the Substrate Temperature on the Photoelectric Properties of the Ga Doped ZnO Film
Effect of ?-SiC Particle Concentration on the Properties of the Duplex Ni-P/Ni-P-?-SiC Coating
Fabrication of Transparent Hydrophilic Nanosized TiO2 Films via Layer-by-Layer Self-Assembly
The Effect of Sintering Temperature on the Crystal Structure and Luminescence Properties of Pr:LSO Polycrystalline Films
Effect of Explosive Charge on 65Cr3C2-35NiCr Coatings Fabricated by D-Gun Technology
Influence of Pulse Frequency on the Structure and Oxidation Resistance of AlPO4 Ceramics Coating and its Deposition Dynamics
Effect of Assisted-Ion-Beam Gases on the Structure of Amorphous Silicon Thin Films Prepared by Ion-Beam-Assisted Sputtering
Structure, Composition and Adhesion Strength of Hf Coatings Deposited on Mo Substrate by Ion Beam Sputtering
Preparation and Photocatalytic Properties of Terrace Composite SnO2/TiO2:Cu2+ Film
Preparation and Photoelectric Properties of Nb/SnO2 Composite Thin Films
Highly Conductive and Transparent PEDOT/PSS Thin Films with Large Area Prepared by Bar-Coating Method
The Influence of C2H2 Flow Rate on the Composition, Structural and Properties of the Ni/?-C:H Films Deposited by FCVA
The Performance of Plasma and Multi-Physical Fields in DC Arc Plasma Reactor for CVD Diamond Film
Development of a Temperature and Pressure-Controlled Corrosion Test Vessel
Chapter 6: Functional Materials for Biomedical Engineering and Biotechnologies
Hydroxyapatite-Poly(Vinyl Alcohol)-Sodium Alginate Porous Hydrogels with Poly(Vinyl Alcohol) Surface Layer Used for Articular Cartilage Repair
Preparation of Slow-Release Potash
Research on Mechanical and Corrosion Properties of Ti-Microalloyed Biomedical Cobalt-Based Alloy
Progress in Fractionation Processes of Lignocellulosic Biomass for Biorefinery: A Review
Photoinduced Microencapsulation of Microcapsules Containing n-Octadecane with P(APUA) and P(AMA) Shell
PGA Fiber Reinforced Calcium Aluminate Cement for Orthopaedic Application
Research Progress in Cellulose Extraction, Modification and Application
Analysis of Solvent Properties of Mandarin Oil
Preparation and Blood Compatibility of Multilayers on the Surface of Medical NiTi Alloy
Bioactive and Antibacterial Ag-AgCl-TiO2 Coating on Titanium Implants
Cell Compatibility of the Micro-Arc Oxidized Surface of Large Plastic Deformed TA2 In Vitro
Preparation of Three Modified Natural Zeolite Powders and Antibacterial Properties of Antibacterial Paper Prepared Using them as Fillers
Analysis and Research of GMM Bone Conduction Pronunciation Vibrator Output Characteristics
Effect of Nano Silver on Inducement of Differentiation of Neural Stem Cells of SD Rats
Synthesis and Characterization of Zeolitic Imidazolate Framework-8@Sodalite Composite Particles
A New Solvent for the Industrial Production of Cellulose Fibers: Quaternary Ammonium Acetate
Low-Power Triplet-Triplet Annihilation Upconversion with a New Anthracene Derivatives
Preparation and Properties Characterization of Modified Chitosan Composited Hemostatic Materials
Preparation and Performance Research of Hemostatic Powder of Chitosan Mixed with Scutellaria baicalensis
Preparation and Performance Characterization of Hemostatic Materials
Optimal Design and Simulation for a Bio-Inspired Micromixer Based on Blood Transport in Vessel
Preparation, Corrosion and Cytocompatability In Vitro of Fluoride-Coated Mg-Zn-Zr Alloy
The Preparation and Characterization of Magnesium Oxide Whisker
Effects of Silver Nanoparticles on the In Vitro Culture and Differentiation of Human Bone Marrow-Derived Mesenchymal Cells
Protein Release and Biological Evaluation of Bio-Inspired Chitosan-Based Nano-Gels
Study on the Preparation and Performance of Carboxymethyl Chitosan Calcium and Carboxymethyl Chitosan Zinc Composite Materials
Corrosion Resistance of Mg-4Zn Alloy with Amorphous Micro-Arc Oxidation Coating in Simulated Body Fluid
Chapter 7: Environment and Building Functional Materials
Three-Point Bending Shear Stress of Wooden Sandwich Composite
Study on the Removal of Pb2+, Cu2+, and Cd2+ from Wastewater Using Modified Stilbite
Fabrication of Ultra-Low Density, High Surface Area Carbon Aerogels and their Application in Supercapacitors
A Innovative Method for Evaluating Basswood Pyrolysis Kinetics
Simulation and Optimization of Cement - Slag Gradation with Limestone Powder
Review on Development and Application of Gelled Material Filling Mined-Out Area
Carbon Felt Properties of Pyrolytic Carbon Felt Direct Thermal CVD
Effect of Supplementary Curing after Steam-Curing on Performance of Concrete
Numerical and Experimental Investigation of Piezoresistance of Asphalt Concrete Containing Graphite
A Study on the Preparation of Epoxy - Modified Polyurethane Foam and its Adhesive Properties
The Steel Slag Fly Ash Foamed Concrete Thermal Properties
Study on the Pore Size Distribution of the Bicomponent Spunbond Nonwoven Geotextiles
Resistance of Straw-Geopolymer Materials to Acid and Alkali Attack
Preparation and Properties of High-Performance Concrete with Ceramic Coarse Aggregate
Influence of Heat Pre-Treatment on Washing Pre-Treated MSWI Fly Ash Cementitious Activity
Progress in BiVO4 Photocatalyst under Visible Light
Modulus Parameter Analysis and Calculation of Steel Deck Asphalt Pavement Material
Research on Properties of the Concrete with Waste Rubber Powder
Facile Synthesis of Phosphogypsum-Based Whiskers by Low Temperature Hydrothermal Route with CTAB Addition
Low-Cost Preparation of SBA-15 Silica Molecular Sieve and High Humidity Sensing Property in a Wide Range of Relative Humidity
Preparation of HTLcs from Magnesium Desulfurization Residues and their Catalytic Performance in Degradation of Waste Polyester
Study on the Drying Shrinkage Property of Magnesium Phosphate Cement
Preparation of Bi1-xLaxVO4 and its Photocatalytic Degradation on Rhodamine B
Calcium Sulphate Whisker Reinforced Plasterboard Flexural Performance Research
Fabrication of Ultra Low-Density Binderless Sandwiching Materials by Rapid Steam Injection
Test and Analysis on Asphalt Content for Fatigue Performance of Polyester Fiber Asphalt Concrete
Preparation of SnO2-TiO2/Zeolite Y Composites with Enhanced Photocatalytic Activity
