Advances in Materials Processing IX

Committees
Preface
I. Material Forming Processes
A Knowledge Based Hybrid Model for Improving Manufacturing System in Rolling Mills
Modeling of Strip Shape during Cold Rolling of Thin Strip
Modeling the Vertical Spincasting of Large Bimetallic Rolling Mill Rolls
Analysis of Cold-Rolled Strip Profile in UCM Mill by Finite Element Method
Theoretical Research of the Axial Force about Cross Wedge Rolling
A New Calculating Model of Rolling Pressure during Temper Rolling Process
Microstructure and Tensile Properties of Al-(5~10)wt%Mg Alloy Sheets Fabricated by Twin Roll Casting and Rolling Process
Finite Element Simulations of A1100 / A3003 (A6063) Sandwich Sheet Rolling Processing
Applying a Uniform Design of Experiment Approach for Reducing Injection Moulding Warpage Deflection
Application of the Grey-Taguchi Method to the Optimization of Metal Injection Molding (MIM) Process
Parameter Optimization of Injection Molding Ti-6Al-4V Powder and Palm Stearin Binder System for Highest Green Density Using Taguchi Method
Fabrication and Detection for the Skeletons of Micro Aerial Vehicle Using Precision Injection Molding
Study of Metal Powder Extrusion and Accumulating Rapid Prototyping
An Analytical Approach to the Extrusion Pressure of Bimetallic Tube
A Numerical Investigation of Extrusion through Bezier Shaped Curved Die Profile
Analyses of Plastic Flow and Die Design during Hot Extrusion of Magnesium Alloy Strips
Analytical Solutions and Finite Element Modelling of Deep Drawing Process for Cylindrical Metal Cups
Deformation Behavior of Ultra-Thin Metal Foils in Strip Drawing Friction Test
Analyzing of Stainless Elliptical Cup Drawing Process
Strip Casting by a Single Roll Caster Equipped with a Scraper
Roll Casting of Three Layers Clad Strip
Parameter Design for the Counter-Blanking Process Using the Finite Element Method and the Taguchi Approach
Application of Back-Up Ring in Fine-Blanking Process
Analysis of Plate Bending in Coilbox by Finite Element Method
Draw Bending of Load-Adapted Sheet Metal Profiles
Fabrication of Ultrafine Grained Copper Alloy by 3-Layers Accumulative Roll-Bonding Process
The Effect of Heat Treatment on Formability of Ultra-Fine Grained AA6061 for Bolt Manufacturing
Design Technique Research of Fine-Forged Spur Bevel Gear Tooth Profile Modification
Design and Simulation Based on Virtual Prototype of New Apparatus for High Velocity Compaction
Effects of Surface Strength and Temperature on Warm Forming of MG-AL-SUS Clad Sheet
Influence of Annealing Treatment on Formability and Springback for Magnesium Alloy Sheets
Prediction of Load Capacity Behavior of Multi-Stage Formed Construction Elements
Reciprocating Shaving Approach to Eliminate Crack and Burr Formations in Pressed Parts
Collaborative Aluminum Profile Design to Adaptable Die Process Planning Using Neural Networks
Fabrication of a Large-Area Silicon Mold with Microstructures Using a Novel Recombining Technique
Die Design in Fine-Piercing Process by Chamfering Cutting Edge
II. Material Subtractive Processes
Optimisation of the Machining of Stellite 6 PTA Hardfacing Using Surface Roughness
Surfaces Machined by Micro End-Mills at Constant Chip Load
Design Optimization of Cutting Parameters in Turning 45Cr Steel Using Cermets Tool
Cutting Performance and Wear Mechanisms of an Al2O3-Based Micro-Nano-Composite Ceramic Tool
Dry Turning of Rotor Steel 26NiCrMoV145 Using Multilayer Coated Cemented Carbide Tools
Experimental Study on the Performance of WC-Co Inserts in Turning 4Cr13 Die Steel
Experimental Study on Cutting Characteristics for Buttress Thread Turning of 13%Cr Stainless Steel
Investigation of Cutting Forces and Vibration in High Speed Milling of Pocket Corner
Finite Element Simulation of Chip Formation during High-Speed Peripheral Milling of Hardened Mold Steel
Fast Tool Servo Machining of Complex Surfaces and Microstructures
Simulation and Optimal Selection of Pitch Angles Distribution for Variable Pitch Angles Helix End Mills
Structure Optimization of Variable Pitch Helix End Mills Based on FEM Simulation
Identification of Stability Lobes in High-Speed Milling Flexible Parts with Bull-Nose End Mills
Simulation of Three-Dimensional Dynamic Cutting Forces and Chatter Stability in Ball-End Milling
Fuzzy Chatter Stability Lobes Model in Milling
Research and Development of Four Axis Linkage Grinding Simulation System of Ball-Nose End Mill
Cutting Performance of Al2O3/TiC/TiN Nanocomposite Tools
Cutting Performance and Wear Mechanism of Si3N4-Based Nanocomposite Ceramic Tool
Research on Five-Axis Dual-NURBS Adaptive Interpolation Algorithm for Flank Milling
Factors in Practical Manufacturability Analysis of Layer-Based Machining (LBM)
Experimental Studies on the Influence of Cutting Parameters on Thrust Force and Torque during Drilling of GFRP with SiC Fillers
Investigations on Drilling of Multimaterial and Analysis by ANN
Investigation on Chip Morphology and Surface Quality in High-Speed Ball-End Milling of Inconel 718
Effect of MQL Liquids on Surface Integrity when High Speed Drilling Titanium Alloy
Surface Integrity when Drilling Nickel-Based Superalloy under MQL Supply
Tool Wear Performance of CVD-Insert during Machining of Ti-6%Al-4%V ELI at High Cutting Speed
Intelligent Monitoring and Estimation of Surface Roughness on CNC Turning
Monitoring of Cutting Conditions with Dry Cutting on CNC Turning Machine
Understanding the Temperature Field in Plunge Cylindrical Grinding for Grinding-Hardening
Study on Grind-Hardening Temperature Field Based on Infrared Temperature Measurement and Numerical Simulation
Phase Transformation and Stress Distribution in Polished PCD Composites
Influence of Magnetic Field Strength on Polishing Effect of the Tiny-Grinding Wheel Cluster Based on the Magnetorheological Effect
Study on NC Compliant Bonnet Tool Abrasive Polishing Based on Magnetorheological Torque Servo
Molecular Dynamics Simulation of Rubbing Phenomena in Ultra-Precision Abrasive Machining
Modeling of Depth of Cut in Abrasive Waterjet Cutting of Thick Kevlar-Epoxy Composites
Prediction of Erosion Profiles during ECM of Spiral Holes
Chipping Brittle Materials: A Finite Element Analysis
Research on the Removal Mechanism of Engineering Ceramics Based on Energy Density
Research on Tooth Trace Modification of Spur Bevel Gear

In Situ Observation and Anisotropy of Free Surface Roughening for Polycrystalline Metals
Edge Chipping of Rock: An Experimental Study
III. Material Additive Processes
Microstructure and Properties of TiAlN/AlN Composite Film Deposited on Cam's Profile by Ion Beam Sputtering Technique
Wear Characteristics and Adhesion Behavior of Calcium Phosphate Thin-Films
Fretting Fatigue Resistance of Fe- Ni-Cr-Al Coating Prepared by Thermal Spraying Subjected to Rotational Bending
Effects of Substrate Bias Voltages on the Erosion Wear Resistance of TiN Coatings Deposited by Pulsed Filtered Vacuum Cathode Arc Deposition
Development of Nano Crystalline Nickel Coating for Engineering Applications
Coating of Polythiophene by Microwave Plasma Polymerization Process
Wear Behavior of the CVD and PVD Coated Piercing Punch
Sputter-Deposited ZrO2 Gate Dielectric on High Mobility Epitaxial-GaAs/Ge Channel Material for Advanced CMOS Applications
Nitrogen and Bias Effect on Homoepitaxial Diamond Growth by Hot-Filament Chemical Vapor Deposition
Major Factors in Rapid Prototyping of Mechanisms
Rapid Prototyping STL Reconstruction for CT Medical Image in Fused Deposition Modelling
Fabrication Inner Channel Ceramics Using Layer Additive Method
IV. Material Joining Processes
An Experimental Study on Brazing of Diamonds onto Thin Steel Wires
Optimal Parameter Design of Solder Residue in Flip Chip Process by Using Taguchi Method
V. Processing of Advanced Materials
A New Solution Method for Homogenization of Effective Properties of Electromagnetic Honeycombs
Surface Roughness and Stress Responses of a Feldspar Porcelain to Fatigue Impact
FEA-Predicted Subsurface Damage in Micro Finishing of a Feldspar Porcelain Using Fine-Grit Dental Burs
Production, Characterization and Application of Silicon-on-Sapphire Wafers
A Vacuum Sucking Approach to Preventing Chips from Attaching to Machined Surface in Cutting of KDP Crystals
Critical Undeformed Chip Thickness and Cutting Pressure in Relation to Ductile Mode Cutting of KDP Crystal
Influence of the Workpiece Crystallographic Orientation on Ultra-Precision Turning of KDP Crystals
Some Aspects of Improving Integrity of Machined Surfaces on Al/SiCp Metal Matrix Composites
Cutting Characteristic of Polycarbonate Sheet Subjected to Wedge Indentation by Knife Edge and Grooved Plate
Machining Properties of Insulating ZrO2 Ceramics Using Porous Copper Electrodes
Isothermal Rolling of Mg-Based Laminated Composites Made by Explosion Cladding
Formability of Ti-29Nb-13Ta-4.6Zr Biomaterial at High Temperatures
Evaluation of Novel Approach on Delamination Factor after Drilling Composite Laminates
Process Technology and Performance Evaluation of Nylon 6/PU Stab Resistance Fabric Matrix
VI. Micro / Nano-Fabrication
Machining of Micro-Channels on Brittle Glass Using an Abrasive Slurry Jet
A Study of Abrasive Jet Micro-Grooving of Quartz Crystals
Modelling and Simulation of Cutting Forces in Micromachining
Experimental Study on the Chip Geometry and Shear Angle in Micro-Cutting Aluminum 7050-T7451
Finite Element Analysis of Micro-Cutting Aluminum 7050-T7451 with the Tool Edge Radius Considered
Design of a Fast Tool Servo Based Diamond Turning Machine for Fabricating Micro-Structured Surfaces
Erosion Mechanism of Ultrasonic Vibration Abrasive Waterjet in Micro Machining
Migration of Materials during Finishing Micro-EDM of Tungsten Carbide
Thermal Effect Analysis of Femtosecond Laser Scribing of Silicon
A Comparison of Dry and Underwater Laser Micromachining of Silicon Substrates
Laser Dieless Drawing Process for Metal Micro-Tubes
Parameter Optimization towards Highest Micro MIM Density by Using Taguchi Method
Surface Modification of Plastic Thin Film Using Anodic Aluminum Oxide Template for Nano Imprint
Improvement on Yield of Anisotropic Conductive Film Attach Process in TFT-LCD Module Using Taguchi Method
Possible Chemical Bond Formation between a Carbon Nanotube and Alumina Matrix - A Quantum Mechanics Investigation
VII. Design, Modelling and Stress Analysis
Design on Hybrid Ceramic Bearing Based on Water Based Fluid with Controllable Viscosity
Minimizing Stress Concentrations in the Femoral Heads of Hip Joint Prostheses: Effect of Borehole Shapes
Determining the Complete Residual Stress Tensors in SOS Hetero-Epitaxial Thin Film Systems by the Technique of X-Ray Diffraction
The Construction of Production Improvement Model for Aerospace Manufacturing Suppliers