Proceedings of the 3rd International Conference on Advances in Materials Processing: Challenges and Opportunities

Name: Proceedings of the 3rd International Conference on Advances in Materials Processing: Challenges and Opportunities | AMPCO 2022, 17-19 Oct, Roorkee, India
Brand: Springer
Price: 117.69 EUR
Availability: OnlineOnly

AMPCO 2022, 17-19 Oct, Roorkee, India

Abhishek Tewari Nikhil Dhawan Gautam Agarwal Sourav Das Sumeet Mishra Anish Karmakar(Editor)

Springer (Publisher)

1st Edition

Published on 9. July 2023

XVI, 259 pages

E-Book

PDF with digital watermarking

System requirements

978-981-99-1971-0 (ISBN)

€117.69incl. 7% vat

System requirements

for PDF with digital watermarking

E-Book Single Licence

Available for download

Description

More details

Other editions

Persons

Dr. Abhishek Tewari is an assistant professor in the department of metallurgical and materials engineering. His primary area of interest is computational materials science

Dr. Nikhil Dhawan is an associate professor in the department of metallurgical and materials engineering. He works in the domain of extractive metallurgy.

Dr. Gautam Agarwal is an assistant professor in the department of metallurgical and materials engineering. His research area includes welding and additive manufacturing .

Dr. Sourav Das is an associate professor in the department of metallurgical and materials engineering. He works in the domain of advanced steel technology.

Dr. Sumeet Mishra is an assistant professor in the department of metallurgical and materials engineering. He works in the domain of mechanical and physical metallurgy.

Dr. Anish Karmakar is an assistant professor in the department of metallurgical and materials engineering. He works in the domain of steel technology.

Content

Intro
Contents
Contributors
Part I Advanced Materials Processing
1 Surface Modification of NiO Nanoparticles Using Stearic Acid and Their Application as Adsorbent
1.1 Introduction
1.2 Experimental Details
1.3 Results and Discussion
1.4 Conclusions
References
2 Microstructure and Mechanical Properties of Dual Two-Phase (B2+DO24) Ti45Fe5Ni50 Intermetallic Alloy
2.1 Introduction
2.2 Materials and Methods
2.3 Results and Discussion
2.4 Conclusions
References
3 Finite Element Analysis of Melting of Bulk Metals Using Microwave Energy at 2.45 GHz
3.1 Introduction
3.2 Material and Modeling
3.3 Governing Equations
3.4 Result and Discussion
3.4.1 Electric Field Intensity
3.4.2 Time-Temperature Profile of Melting of Metals
3.5 Conclusions
References
4 Layered Grain Growth of Aluminum Between MWCNT Layers During Sintering of Al-MWCNT Composites
4.1 Introduction
4.2 Experimental Procedure
4.2.1 Materials
4.2.2 Methodology
4.3 Results
4.3.1 SEM Analysis of Al-CNT Nanocomposite
4.3.2 Hardness
4.4 Conclusion
References
5 An Attempt to Develop an Organ-on-a-Chip Using 3D Printing Technology for in Vitro Drug Testing
5.1 Introduction
5.1.1 Organ-on-a-Chip
5.2 Organ-on-a-Chip Models for Various Organs
5.3 Fabrication Processes to Develop Organ-On-A-Chip Models
5.4 Material and Methods
5.5 Development of an Organ-On-A-Chip
5.6 Conclusions
References
6 Investigation on Through Mask Electrochemical Surface Texturing Using Additive Manufactured Mask
6.1 Introduction
6.2 Experimental Details
6.3 Results and Discussion
6.4 Conclusion
References
7 Study of the Microstructure and Mechanical Behavior of TIG Weldments Between AISI 304L and AISI 430 Stainless Steels
7.1 Introduction
7.2 Experimental Methods
7.3 Results and Discussion
7.4 Conclusions
References
8 Tensile Strength Analysis of 316L Stainless Steel Parts Fabricated via Selective Laser Melting
8.1 Introduction
8.2 Material and Methods
8.2.1 Sample Preparation
8.2.2 Experimental Setup
8.3 Results and Discussion
8.3.1 Microstructure Characterization
8.3.2 Tensile Strength Test
8.3.3 Analysis of Variance (ANOVA)
8.4 Conclusions
References
9 Investigating the Effects of Induction Heating on Friction Stir Welding of Low-Carbon Steel
9.1 Introduction
9.2 Materials and Experimental Procedure
9.3 Results and Discussion
9.4 Conclusions
References
10 Microstructural Evolution During Homogenization of Ni-Cu-Al-Ti Alloy
10.1 Introduction
10.2 Material and Methodology
10.3 Results and Discussion
10.3.1 Macrostructure and Microstructure
10.3.2 Homogenization and Hot Working
10.3.3 Hardness and Strength
10.4 Conclusions
References
11 Effect of Nickel Addition on the Evolution of Microstructure of ZA-27 Alloy
11.1 Introduction
11.2 Materials and Methods
11.3 Results and Discussion
11.4 Conclusions
References
12 Influence of Molybdenum on Nitride Strengthening of Fe-Cr-Mo Alloys
12.1 Introduction
12.2 Materials and Experiments
12.3 Results and Discussion
12.3.1 Optical Microscopy
12.3.2 XRD Analysis
12.3.3 Microhardness Measurements
12.4 Conclusions
References
13 Comparative Study of Heat Treatment of Ni-Cr-Mo Alloy Tubes Using Resistance and Induction Heating Furnaces
13.1 Introduction
13.2 Heat Treatment Furnaces
13.2.1 Resistance Roller and Annealing Furnace
13.2.2 Induction Annealing Furnace
13.3 Results and Discussion
13.4 Conclusion
References
14 Electron Beam Welding and Gas Tungsten Arc Welding Studies on Commercially Pure Titanium Sheets
14.1 Introduction
14.2 Experimental Procedure
14.3 Results and Discussion
14.3.1 Microstructure of Welded Joints
14.3.2 Microhardness
14.3.3 Tensile Properties
14.3.4 Fractography
14.4 Conclusions
References
Part II Advanced Steel Technology
15 Hot Deformation Behavior of Medium Carbon Low Alloy Steel Using Arrhenius and ANN Modeling Methods
15.1 Experimental Condition
15.1.1 Steel Used
15.2 Results and Discussion
15.2.1 Analysis of Flow Stress Curves
15.2.2 Arrhenius Model
15.2.3 Kinetics of DRX and SEM Micro Structure Analysis
15.2.4 Prediction of Flow Stress by Artificial Neural Network (ANN) Model
15.3 Conclusion
References
16 Comprehending Structure-Property Relationship in Hot-Rolled Low Alloy Steels
16.1 Introduction
16.2 Alloy Composition, Processing and Characterization
16.3 Results and Discussion
16.4 Conclusion
References
17 Effect of Aging on Microstructure and Mechanical Behavior of Superalloy 617
17.1 Introduction
17.2 Experimental Procedure
17.3 Results and Discussion
17.3.1 Microstructural Characterization
17.3.2 Mechanical Behaviour
17.4 Conclusions
References
18 Derivation of Unified Interaction Parameter Formalism and Its Application in Local Equilibria Demarcation of Fe-C-X (X = Mn, Si and Cr) Systems
18.1 Introduction
18.2 Some Important Thermodynamic Formalisms
18.2.1 Equivalence of UIPF with the Formalism by Lupis and Elliot
18.3 Metastable Phase Boundaries Prediction Using UIPF
18.4 PLE/NPLE Boundary Prediction Using UIPF
References
19 Erosive Wear of Low Temperature Nitrided 13/4 MSS for Hydro-turbine Application
19.1 Introduction
19.2 Experimental Details
19.3 Results and Discussion
19.3.1 Nitriding Treatment
19.3.2 Erosive Wear of Nitrided MSS
19.3.3 Discussion
19.4 Conclusion
References
20 Ultrasonic Shot Peening and Its Influence on Oxidation Behavior of 347 Grade Austenitic Stainless Steel
20.1 Introduction
20.2 Materials and Methods
20.3 Results and Discussions
20.4 Conclusions
References
21 Bainitic Transformation in Steel via Surface Mechanical Attrition Treatment at Room Temperature
21.1 Introduction
21.2 Experimental
21.2.1 Material
21.2.2 Surface Mechanical Attrition Treatment (SMAT)
21.3 Results and Discussions
21.3.1 XRD Analysis
21.3.2 Microstructure
21.3.3 Hardness Profile
21.4 Conclusions
References
22 Numerical Investigation of Weld Induced Residual Stress State Field for Improved Structural Integrity in AUSC Power Plant Applications
22.1 Introduction
22.2 Computational Set-Up and Measurements
22.2.1 Prescribed Temperature via Gaussian Double Ellipsoidal Model
22.3 Results and Discussion
22.4 Conclusions
References
23 Experimental and Numerical Analyses of Uniaxial Tensile Test of Automotive Grade Anisotropic Sheets
23.1 Introduction
23.2 Experimental Procedure
23.3 Numerical Procedure
23.4 Results and Discussion
23.5 Conclusions
References
Part III Materials for Sustainability
24 Green Graphene-Based Anticorrosive Coating for Carbon Steel in Marine Environment
24.1 Introduction
24.2 Experimental Section
24.2.1 Materials
24.2.2 Preparation of Emulsion and Working Electrode
24.2.3 Electrochemical Measurement
24.3 Results and Discussion
24.3.1 Potentiodynamic Polarization Study
24.3.2 Surface Morphology and Protection
24.4 Conclusions
References
25 Assessment of Mechanical Behavior of Ti-Based Biomaterial in Prosthesis Application
25.1 Introduction
25.2 Materials and Methodology
25.3 Results and Discussion
25.4 Conclusion
References
26 Challenges Associated with 3D Printing of Poly-Ether-Ether Ketone (PEEK) Components
26.1 Introduction
26.2 Material and Method
26.3 Challenges in 3D Printing PEEK
26.3.1 Warpage
26.3.2 Moisture Intake by Filament
26.3.3 Low Crystallinity Regions
26.3.4 Improper Bed Leveling
26.4 Conclusion
References
27 Effect of Functionalization of Carbon Nanotubes on Mechanical Behavior of Ultra High Molecular Weight Polyethylene Matrix Composite
27.1 Introduction
27.2 Experimental
27.2.1 Materials Used
27.2.2 Experimental
27.2.3 Characterization
27.3 Result and Discussion
27.3.1 Chemical and Morphological Analysis
27.3.2 Thermal Behavior
27.3.3 Mechanical Behavior
27.4 Conclusion
References
28 Influence of Different Precipitating Agents on the Synthesis of NiMn-LDHs Based Cathode Materials for High Performance Hybrid Devices
28.1 Introduction
28.2 Experimental
28.2.1 Synthesis
28.2.2 Characterization
28.2.3 Electrode Fabrication for Electrochemical Analysis
28.3 Results and Discussion
28.4 Conclusion
References
29 Investigation of Hot Corrosion Behaviour of Ytterbium Oxide Doped Gadolinium Zirconate Thermal Barrier Coating for Gas Turbines
29.1 Introduction
29.2 Experiment
29.3 Result and Discussion
29.4 Conclusion
References
30 Thermal and Flame Retardancy Behavior of Eggshell Filler Reinforced Polypropylene Composites
30.1 Introduction
30.2 Materials and Methods
30.2.1 Sample Preparation
30.2.2 Characterization Techniques
30.3 Results and Discussion
30.3.1 Thermogravimetric Analysis
30.3.2 UL-94 Horizontal Burning and LOI Testing
30.4 Conclusions
References
31 Photovoltaic Module Recycling Processes: A Review
31.1 Introduction
31.2 Materials Used in Various PVMs
31.3 Recycling Processes
31.3.1 Physical Process
31.3.2 Chemical Process
31.3.3 Thermal Process
31.3.4 Hybrid Process
31.4 Repurposing of Recycled Materials
31.5 Conclusion
References
32 Optimization of Leaching Parameters for Recovery of Tantalum from Waste Tantalum Capacitors
32.1 Introduction
32.2 Material and Methods
32.3 Results and Discussion
32.3.1 Pre-processing
32.3.2 Leaching
32.4 Conclusions
References
33 Sustainable Composites Using Fruit Waste: An Experimental Investigation
33.1 Introduction
33.2 Materials and Methods
33.3 Results and Discussions
33.4 Conclusions
References
34 An Experimental Study of Slug Behavior in 2D Gas-Solid Tapered Fluidized Beds for Geldart D Particles
34.1 Introduction
34.2 Methodology
34.2.1 Experimental
34.2.2 The Digital Image Analysis Technique
34.3 Results and Discussion
34.3.1 Effect of Taper Angle
34.3.2 Influence of Air Velocity
34.4 Conclusions
References
35 Production of Microcellular Hydrophobic Carbon-Foam from Sucrose for Oil Absorption
35.1 Introduction
35.2 Experimental Work
35.2.1 Material Used in Experiment
35.2.2 Microcellular Carbon-Foam Preparation Method
35.2.3 Sample Characterization Procedure
35.3 Results and Discussion
35.3.1 Analysis of Sucrose-Based Carbon-Foam
35.4 Conclusion
References
36 Microwave Heating Mechanism of AZ31/HA Metal Matrix Biocomposites
36.1 Introduction
36.2 Materials and Methods
36.3 Results and Discussion
36.3.1 Microwave-Material Interaction
36.3.2 Microwave Interaction with Targeted Materials
36.3.3 Microwave Sintering Mechanism
36.4 Conclusion
References
37 Recovery of Tungsten and Copper from Tungsten-Copper (W-Cu) Electrical Contacts Borings
37.1 Introduction
37.2 Theoretical Consideration
37.3 Experimental
37.3.1 Materials
37.3.2 Procedure
37.4 Results and Discussion
37.4.1 Leaching of Tungsten-Copper Borings at 500 g Scale
37.4.2 Electrowinning of Copper from the Synthetic and Actual Stripped Solution
37.4.3 Reduction of Ammonium Paratungstate (APT)
37.5 Conclusions
References

System requirements

Save as PDF Copy link into clipboard

Schweitzer Fachinformationen

Proceedings of the 3rd International Conference on Advances in Materials Processing: Challenges and Opportunities

Description

More details

Other editions

Additional editions

Persons

Content

System requirements