Eco-Materials Processing and Design XIII

Preface and Organizing Committee
A. Environment Related Materials and Photocatalysts
Effect of Solution Treatment on Microstructure and Properties of the SAF2507 Super Duplex Stainless Steel
Materials Life Cycle Assessment of Chemical Strengthening Glass Used for Touch Screen Panel
MLCA (Material Life Cycle Assessment) for ITO Recycling
Study of Resistance Characteristics of Silicon Carbide Resistor Materials
Synthesis of Sn4+ Doped TiO2 Nanotube and its Photocatalytic Activity
Removal of Isopropyl Alcohol (IPA) Using Anodized Photocatalytic Metal Membrane Reactor
Treatment Performance of Low Strength Electric Wastewater Using Solid-Advanced Oxidation Processes
Photocatalytic Degradation of Humic Acid Using Ti/Anodized TiO2 Metal Plate with Fe-Doping
Fabrication of Nanosheet-Assembled Hierarchical AlOOH and ?-Al2O3 Microspheres and its Application in Water Purification
Low Temperature Molten-Salt Synthesis and Characterization of Nanocrystalline Mullite Whiskers from Coal Gangue
Effect of Temperature and Carbon Contents on the Synthesis of ?-SiC from Silicon Sludge by Direct Carbonization Method
A Study on the Synthesis of SiC Powder from the Silicon Sludge of the Photovoltaic Industry
A Study on the Improvement of Nitrogen Removal Efficiency in Small Size Sewage Treatment Facility Utilizing Zeolite Carrier
The Rheological Properties of Konjac Glucomannan (KGM) Solution
Preparation and Application of Electrospinning Membranes of Thermoplastic Carboxymethyl Cellulose/PLA for Removal of Cu2+ from Aqueous Solutions
Extraction of Polyethylene Residue Components in Soil
Research of Low Cost Fracturing Proppant
Studies on Adsorption of Strontium (II) by Expanded Rice Husk
Preparation of Porous Poly(butylene succinate)(PBS)/Starch Blends for Absorption of Copper (II) Ions
The Study of Environmental Degradation Dharacteristics of Photodegradable Polyethylene Film
Effect of PE Film Degradation Products on the Carbon Dioxide Content of Soil: A Mathematical Study
Effect of Gelatinization on Morphology and Thermal Properties of Polyvinyl Alcohol-Corn Starch Blend Films
Factors Affecting Coagulation of Phosphorus from Municipal Sewage
Adsorption of Bromic Acid Ion in Water by the Reduced Titanium Oxide
B. Eco-Materials Processing and Design, Multifunctional Materials
Properties of Artificial Lightweight Aggregate by Using Magnetic Separated Bottom Ash from Coal Power Plant
Bio-Inspired Synthesis of Al2O3/Polymer Composite
Thermoelectric Properties of Manganese Monosilicide Synthesized by Mechanical Alloying Process
First-Principles Investigation on Ag, N Codoped in p-Type ZnO
Characteristics of Artificial Lightweight Aggregate by Using Magnetic Separated Desulfurized Fly Ash and Dredged Soil
Cu2O Doping Effects on Microstructure and Piezoelectric Properties in (Na0.52K0.44)(Nb0.9Sb0.06)O3-0.04LiTaO3 Pb-Free Ceramics
Effect of N2 Addition on Microstructure and Properties of SAF 2507 Duplex Stainless Steels GTAW Welded Joint
Study on the Manufacturing of Zirconia Cutting Square Tools by PIM and Hot Isostatic Pressing Process and Test Cutting
Compressive Strength Evaluation of SCR Catalyst Recycled Al-Dross
A Study on the Effect of High Calorie Diet on Stress Alleviation
Fabrication and Surface Hardening Properties for SiC/AlN Ceramic Composites with Different SiC Grain Size
Reduction Effects of Urban Heat Island by Water-Retentive Pavement
Prediction of Fine Blanking Tool Deformation to Produce Multiple Turbocharger Vane Levers with Stainless Steel
Defects Diagnosis Technology of Water Supply Pipe's Network Using Pipe Endoscope Camera of High Resolution/High Pressure Resistance Performance
Preparation and Characterization of KGM/CaCO3 Composite Films
Effect of Aluminum Addition on the Static Recrystallization Behavior of Magnesium
A Study on Thermal Conductivity and Mechanical Properties of Al-Zn-Mg Aluminum Alloys
A Study on Surface Oxidation Coating Characteristic of Al-Si Casting Alloys
Hot Workability of a High Strength Low Alloy Steel for Construction Application
Effect of Deep Cryogenic Treatment on Microstructure of 5A06 Aluminum Alloy MIG Welded Joint
Microstructure and Mechanical Properties of Al/Cu Composite Produced by Hydrostatic Extrusion during Isothermal Aging
Effect of Annealing Process on Mechanical Properties and Texture Changes of AZ31 Mg Alloy Sheets
C. Nano-Structured and/or Hybrid Materials, Porous Materials
Porosity Measurement of Porous Copper by Unidirectional Solidification
Effects of ?-Si3N4 Seeds Addition on Microstructure and Mechanical Properties of Porous Si3N4 Ceramics
Synthesis of ZnO Nanorods with Tunable Aspect Ratio
Effect of Size and Stress Field on Electronic Properties of ZnO Nanowires
Hydrogen Permeability of NiO-Doped Alumina with Nickel Composites Membrane
Preparation of Porous Alumina Powder Using Sol Containing Trehalose Dihydrate
Research on Production of Bluecoke with Low Temperature Carbonization Process
Synthesis and Characterization of Sn Doped SiO2 by Reverse Micelle and Sol-Gel Process
Development of Dynamically-Formed Membranes Using Colloidal Silica and Kaolin
Preparation of Lanthanum Oxide Nanoparticles by Chemical Precipitation Method
Preparation and Characterization of Polyethylene/Ethylene Vinyl Acetate Composite Non-Dropping Greenhouse Film
Study on Microstructure and Mechanical Properties of Porous Si3N4 Ceramics
Characterization of Cold-Rolled Nickel Electroplated Copper Sheet
Fabrication and Characterization of Alumina/Zirconia Ceramic Compound
Research of Assembled Monolithic Compound Spiral Reinforced Concrete Column Encased by Steel Plate Hoop and Jointed by Bolts
D. High Performance Materials
Low-Temperature and Rapid Fabrication of Bulk Nano-TiO2 Ceramic
Study on Preparation of Nano-SiC Fibers by Template Method Based on Waste Cotton Linter
Shot Peening Characteristics of Cold-Rolled Mo Sheet
Preparation and Mechanism of Nano-TiO2 Coatings on Poly(p-phenylene-benzobisoxazole) (PBO) Fiber
Effect of TiC Content on the Microstructure and Mechanical Properties of Ti3AlC2/Al2O3In Situ Composites Synthesized by Hot Pressing
Effects of Sintering Conditions and Additives on Translucent Silicon Nitride Ceramics
The Dynamic Recrystallization of Hot-Deformed Austenite in a Micro-Alloyed Steel
Effect of Electromagnetic Stirring on the Microstructure and Mechanical Properties of the High Speed Steel
Preparation and Performance of LiFePO4/C Using Fe2O3 as Starting Material
Molten Salt Synthesis of Mullite Whiskers from Silicon Carbide Precursor
Effect of Sintering Agents on the Sintering and Physical Properties of ATO (Antimony Doped Tin Oxide)
A Brief Review about Surface Treatment of Magnesium Alloys
Effects of Impregnating and Heat Treatment on the Oxidation and Thermal Shock Properties of Pressureless Sintered SiC/Graphite Composites
Synthesis of Layered-Ternary Ti2AlC/Al2O3 Composites by an In Situ Reaction and Hot Pressing Sintering
Microstructure Evolution during Combustion Synthesis of Ni/Ni-Aluminide Laminated Composites
Effect of Sintering Temperature on the Microstructure and Electrical Properties of SnO2-Based Varistors
Effect of Calcination of the Raw Materials on the Microstructure and Electrical Properties of ZnO-Based Linear Resistance Ceramics
Drawing and Property of 316L Extra Fine Stainless Steel Wires
Effect of Ti, Al and Cu Addition on Structural Evolution and Phase Constitution of FeCoNi System Equimolar Alloys
Effect of Impact Angle on Erosion Wear Behaviours of SiCp/Cast Iron Surface Composite
A Study on Reaction Bonded Ceramics Fabricated by Silicon Infiltration to B4C Preforms
Fabrication of Porous SiC/SiAlON Composites Using Semi Coke and Fly Ash as Raw Material
Prediction of the Flow Stress of a High Alloyed Austenitic Stainless Steel Using Artificial Neural Network
Experimental Study on Intensified Leaching of Vanadium Ore
Precipitation Behavior of High-Nitrogen Low-Nickel Austenitic Stainless Steel at Intermediate Temperature
The Effect of Porosity of CBN Grinding Tools on Grinding Properties
E. Biomaterials
Modified Distillers' Grains by Microwave-Assisted Hydrolysis for Cu2+ Adsorption from Aqueous Solution
Synthesis of Glycerol Carbonate from Biomass Glycerol: Focus on the Calcination Temperature
Preparation and Microstructure of Biomorphic Hydroxyapatite Using Extracted Beech Wood Template
F. Energy Related Materials, Carbon Materials
Thermoelectric Properties of Solid-State Synthesized Magnesium Silicides Doped with Group BI-III Elements
Influence of Composition of Gd-Doped Ceria Electrolyte on Performance of Solid Oxide Fuel Cell
Fabrication of Novel Ag-Paste and Evaluation of its Electrical Properties in Bulk-Si Solar Cell
Dye Sensitized Solar Cells Based on ZnO Nanorod/TiO2 Nanoparticle Composite Films
A Study on Fabrication, Dispersion and Surface Coating of Nanocarbon for MgO-C Refractories
Development of Nano-Carbon Bucky-Paper Membranes for Membrane Distillation
Synthesis and Characterization of Sulfonated Poly(diphenyl ether ketone sulfone)s Containing Dibenzoylbenzene Moiety for Proton Exchange Membrane Fuel Cell
Nano Composite Membranes of Sulfonated Poly(ether sulfone)s Containing DHTPE and SiO2 for PEMFC
Research on Electrothermal Properties of a Composite Carbon Fiber Paper
Thermal Decomposition Characteristics of Mg (NO3)2?6H2O and MgCl2?6H2O Composite as Phase Change Material
G. Others
Effect of Heat Treatment on Microstructures and Hardness of SiC/Steel Armor Composite
Inspection of the TFT Devices Using the Low-Energy Electron Beam Emitted from the Microcolumn
Fast Inspection of Non-Visual Defects in the Wafer Surface Using Two Low-Energy E-Beam Sources
Synthesis of Al2O3/TiAl In Situ Composites from Ti-Al-TiO2-Cr-V2O5
The Effects of Catchment Materials and Treatment Train on Rainwater Quality in a Rainwater Harvesting System
Influence of Addition of Waste Glass as a Fluxing Agent on the Bloating Phenomenon of Artificial Aggregates Fabricated from Coal Bottom Ash
The Relationship between Viscosity and Electrical Conductivity of CaF2-SiO2-Al2O3-CaO-MgO Slag System
Failure Analysis of ERW Seam Weld Pipeline in Internal Pressure
Study on the Rheological Properties of LLDPE/CaCO3 Plasticized with the Fatty Acid Extracted from Hogwash Oil
The Behaviors of Removing Silver Ions by Low-Cost Expanded Rice Husk, Nature Diatomite and Nature Bentonite as Sorbents
Investigation on Mechanical Properties and Formability of Cross Roll Rolled Ni-10Cr Alloy
Investigation of Microstructure and Mechanical Properties of Friction Stir Lap Jointed Ni Base Superalloy