Engineering Materials: Properties and Processing Technologies

<ul><li>Preface</li><li>Chapter 1: Composites, Polymers and Ceramics</li><li>Analysis of the Upshot of Heat Treatment on Properties of Magnesium Hybrid Composites</li><li>A Comparative Study of the Effect of Natural Fillers Embedded in Jute/Basalt Hybrid Composite</li><li>Performance and Mechanical Characterization of Tufted and Untufted Woven Pine Apple Leaf Fibre Reinforced with Poly Lactic Acid Green Composites</li><li>Effect of Electrical Poling on the Structural, Dielectric, and Photoluminescence Properties of Eu³⁺ Substituted Eco-Friendly Ferroelectric Material Na_0.5Bi_0.5TiO₃</li><li>Impetus Yield of Acrylic Top Cover Pyramid Solar still due to Furthered Thermal Conductivity of MnO₂ and PANI-MnO₂ Nanocomposite Materials</li><li>MWCNT Filled Banana-Rice Husk Epoxy Hybrid Natural Fiber Polymer Composites</li><li>Macrostructure and Fracture Behaviour of Rice Husk and MWCNT Dispersion Strengthened Alkali Treated Banana Fiber Matrix Hybrid Composites</li><li>Experimental Study of Fiber Orientation on the Mechanical Properties of Glass Fiber Reinforced Thermoplastic Composites</li><li>Processing and Mechanical Properties of (Hf-Ta-Zr-Nb-Ti)C</li><li>A Study of the Relationship between the Rate of Return Strain of Polytetrafluoroethylene on Time, Mechanical Stress and Dose of Electron Irradiation</li><li>Predicting the Climatic Resistance of the Material and the Durability of the Structural Elements of the Composite Tower of the Power Line</li><li>Development of Digital Models of Physical and Mechanical Characteristics of Biodegradable Polymers Using the Example of Compositions Based on Low Density Polyethylene with Natural Rubber</li><li>Mathematical Modeling in Studying the Electrophysical Properties of Syndiotactic 1,2-Polybutadiene</li><li>Research of Moisture Sorption by Laminated Composite Materials</li><li>Influence of Filler Concentration on the Mechanical Properties of a Polymer Composite</li><li>Materials for the Needs of Agriculture Based on Biopolymers: A Comparative Analysis of Physical and Mechanical Properties</li><li>Study of Thermal Aging of the PCM Using Acoustic Emission and Optical Microscopy</li><li>Development of Heat-Resistant Composite Foam Material</li><li>Studies of Dielectric Characteristics of Polymer Films in a High-Frequency Electromagnetic Field</li><li>Material Parameter Assessment for Noise-Absorbing Devices in Shoe Heels</li><li>Chapter 2: Microstructure, Properties and Processing of Structural Metals</li><li>Microstructure Analysis of Progressive Secondary AlSi7Mg0.6 Alloy with Higher Fe Content Using Electron Metallography Techniques</li><li>Comparison of Microstructure and Properties of Nickel-Copper Alloy Prepared by Casting and Laser Powder Bed Fusion Process</li><li>Formation of Sulphides in As-Cast GOES Thin Strips</li><li>Characterisation of a San Mai Steel Composite for the Manufacture of Knives</li><li>Numerical Simulation of the Welding Process during the Main Circulation Pump Impeller Repair</li><li>A Study of Cut Surface after the Abrasive Water Jet Application on the MS1 Material Prepared by DMLS Method</li><li>The Influence of Progressive Cladding Technologies on Layers Quality</li><li>Chapter 3: Building Materials</li><li>Creep of Foam Concrete from the Position of the Hereditary Theory of Aging</li><li>Durability of Asphalt Concrete with Mineral Fillers Made of Non-Carbonate Raw Materials</li><li>The Effect of the Dispersion Nickel Slag Additive on the Strength of Ceramic Bricks</li><li>Mechanical Properties of Sand-Cement Mortar with Different Water/Cement Ratio under Thermal Gradient Conditions</li><li>Aging of Structural Materials Modified with Polymer Additives in Cold Climate Conditions</li><li>Analysis and Development of Innovative Concrete Compositions in the Republic of Bashkortostan</li><li>Nonlinear Modeling of Heat Distribution during a Concreting Beam, Using a Heating Electric Wire</li><li>Mineral Fillers Influence on Structure Formation and Properties of Asphalt Concrete</li><li>Increasing Sedimentation Stability of Cement-Mineral Suspensions by Adding the Hydroxyl-Containing Water-Soluble Polymers</li><li>Development of Acoustic and Thermal Insulation Materials from Pantyhose Waste</li><li>Flattening of Bamboo Culm while Softening in Palm Oil and Subsequent Mechanical Characterization</li><li>Potential Construction Applications of Sustainable 3D Printed Elements Made from Plastic Waste</li><li>Thermal and Flammability Properties of Flame Retardant Phase Change Material for Buildings Applications</li><li>Additive Manufacturing with Environmentally Sustainable Materials for Shell Envelop System</li><li>Green Building Materials: Mechanical Performance and Environmental Sustainability</li></ul>