
THERMEC 2018
Description
Alles über E-Books | Antworten auf Fragen rund um E-Books, Kopierschutz und Dateiformate finden Sie in unserem Info- & Hilfebereich.
This book presents the proceedings of the THERMEC'2018: 10th International Conference on Processing and Manufacturing of Advanced Materials, which took place between July 09 and July 13, 2018 in Paris, France, under the co-sponsorship of Universite de Lille, MINES ParisTech, PSL and Universite de Tours, France. The presented book will be useful for many researchers and engineers/technologists working in different aspects of processing and fabrication of materials, structure/property evaluation and applications of both ferrous and nonferrous materials including biomaterials, smart materials as well as the advanced measurement techniques in the materials science.
More details
Other editions
Additional editions


Persons
Content
<i>In Situ</i> Synchrotron Analysis of Twinning Stresses in an Aged Mg-4.5Zn Alloy</li><li>The Influence of Powder Particle and Grain Size on Parts Manufacturing by Powder Bed Fusion</li><li>Deformation Twinning Behavior in High Ni-Austenitic Materials</li><li>Microstructure and Fatigue Properties of TiAl with Unique Layered Microstructure Fabricated by Electron Beam Melting</li><li>Micro-Alloyed Steel for Forgings</li><li>Ultrasonic Rheocasting for Refinement of Mg Alloys Reinforced with LPSO Phase</li><li>Microstructure and Properties of Cu-Cr-Zr-Ag Alloy</li><li>Synthesis of Cu-Ni-Al Shape Memory Alloy by Powder Metallurgy</li><li>Chapter 3: Coatings and Surface Engineering</li><li>Controlling Silver Ion Release from Ag-Based Nanocoatings by Plasma Surface Engineering</li><li>Stress Gradient Determination in Anti-Corrosion Multilayer Coating</li><li>Investigation of the Splat Deposition Behavior onto a Composite Coating in Cold Spray</li><li>Cladding of Stellite-6/WC Composites Coatings by Laser Metal Deposition</li><li>High Pressure Cryogenic Nitrogen Jet for Clean Coating Removal: Experimental Study of Polyamide Ablation</li><li>Study and Development of a Multilayered Coating to Improve Hard Metal Cutting Tools Performances</li><li>Superhydrophobic and Corrosion Protective Coating on Aluminium</li><li>Dry Surface Preparation Using Supercritical Cryogenic Nitrogen Jet Improves the Adhesion Strength of Cold Gas Sprayed Coatings (SCNCS)</li><li>Au-Ni and Rh Electroplated Coatings Evaluation for ITER Ion Cyclotron Resonance Heating Radio-Frequency Sliding Contacts</li><li>Response of Cold Sprayed Ti6Al4V Coatings to Solid Particle Erosion and Micro-Scratch Wear Processes</li><li>Oscillating Contact Wear in Cold Sprayed Ti6Al4V Coatings for Aeronautical Repairs</li><li>The Effect of Potential on Surface Characteristic and Corrosion Resistance of Commercial Pure Titanium Processed by Anodic Oxidation Treatment</li><li>Novel Methodology for the Selection, Dosing and On-Line Control of Corrosion Inhibitors for Industrial Acid Pickling</li><li>The Effect of Flue Gas Environment on the Corrosion Behavior of the Sulfuric Acid Dew-Point Corrosion Resistant Steel</li><li>Influence of Rolling Force on Corrosion Resistance of Interstitial-Free Auto Sheet Steel</li><li>An Experimental Method to Evaluate the Effect of Welding Residual Stress on Corrosion Fatigue Properties of Structural Steel in Synthetic Seawater</li><li>Mechanical Fields on Cross-Shaped Specimens for Stress Corrosion Cracking of Cold-Worked Austenitic Stainless Steels</li><li>Electrochemical-Based Characterization of the Corrosion Fatigue Behavior of Creep-Resistant Magnesium Alloys DieMag422 and AE42</li><li>The Influence of Ni Content on the Corrosion Resistance of Cu-Ni-Sn-C-P Sintered Alloys in Poor Quality Fuel</li><li>Relationship between Microstructure and Exfoliation Corrosion in Mg-14mass%Li-3mass%Al Cold-Rolled Alloy</li><li>Hot Corrosion of Alloy 617 OCC in Simulated USC Power Plant Environment</li><li>Change of Intergranular Corrosion Behavior along the Thickness in a Friction-Stir-Welded 7N01-T5 Aluminum Alloy</li><li>Effect of Sn, Zn and Bi Addition on Corrosion Characteristics of Magnesium Alloys Sintered by Spark Plasma Sintering</li><li>Microstructure and Corrosion Behavior of Extruded Mg-Zn-Er Alloys</li><li>Cleaning Optimization of Hot-Dip Galvanized Steel Surfaces in Preparation for Paint Application</li><li>Improvement of the Surface Properties of Low Temperature Plasma Nitrocarburized Martensitic Precipitation-Hardening Stainless Steel by Aging Treatment</li><li>Effect of Gas Content and Treatment Temperature on the Characteristic of Surface Layers of Low Temperature Plasma Nitrided 316L Austenitic Stainless Steel</li><li>Effects of Post-Drawing Surface Heat Treatments on the Strength and Torsional Ductility of High Strength Steel Wire</li><li>First-Principles Study of Chlorine Adsorption on Clean Aluminum Surface</li><li>Micro-Nanostructured Silicone Rubber Surfaces Using Compression Molding</li><li>Simple Fabrication of Superhydrophobic Surfaces Using Atmospheric-Pressure Plasma</li><li>Effects of Surface Treatment for A5052 Aluminum Alloy on Adhesiveness between A5052 Aluminum Alloy and Engineering Plastics</li><li>Effects of Surface Structure and Hydrogen on the Fatigue Strength of Electroless Nickel-Phosphorus Plated Al-2%Cu Alloy</li><li>Mechanical Property of Magnesium Alloy Surface with Dense Oxide</li><li>A Laser Shock Approach to Cold Spray</li><li>Effect of Interface Damage on Loosening Behavior of Acetabular Cup Subjected to Cyclic Loading</li><li>Amorphous Alumina Films Efficiently Protect Ti6242S against Oxidation and Allow Operation above 600 degreesC</li><li>Serial Production Applications and Application Development with Focus on Cold Spraying at Obz Innovation</li><li>Control Quality on Process of Laser Heat Treatment</li><li>Understanding Cold Spray for Enhanced Manufacturing Sustainability</li><li>Superhydrophobic Coating Bioinspired on Rice Leaf: A First Attempt to Enhance Erosion Resistance Properties at Environmental Conditions with Ceramic Particles</li><li>Corrosion Mechanisms of New Wrought Mg-Al Based Alloys Alloying with Mn, Zn and Sn</li><li>Coating Toughness Estimation through a Laser Shock Testing in Ni-Cr-B-Si-C Coatings</li><li>Cold Spray of Mixed Sn-Zn and Sn-Al Powders on Carbon Fiber Reinforced Polymers</li><li>Mass Transfer in Yb Silicate Environmental Barrier Coatings at High Temperatures</li><li>Chapter 4: Ceramics and Composites</li><li>Development and Properties of Cast TiAl Matrix <i>In Situ</i> Composites Reinforced with Carbide Particles</li><li>Elaboration of Architectured Copper Clad Aluminium Composites by a Multi-Step Drawing Process</li><li>Foaming and Compressive Properties of A359/SiC<sub>P</sub> Metal Matrix Composites</li><li>Competitive Reactions and Formation Mechanism of Microstructures in Mg/Cu Super-Laminate Composites during Initial Hydrogenation</li><li>On the Study of a TiB<sub>2</sub> Nanoparticle Reinforced 7075Al Composite with High Tensile Strength and Unprecedented Ductility</li><li>Evaluation of Effective Thermal Conductivity of Metal Matrix Composites by Using Image-Based Calculation</li><li>Effect of Slit Shape on Joinability of Zircaloy - SiC/SiC Composite Tube Joint with Titanium Powder</li><li>Effect of Processing Route on Microstructure and Mechanical Properties of a Ti-3Al-2.5V/TiB Composite</li><li>Development of Tool Steel Matrix Composites with High Thermal Conductivity</li><li>Tensile Fracture of TiB Whisker Reinforced Ti Alloy Matrix Composites</li><li>Metallic Composites as Form-Stable Phase Change Alloys</li><li>Structural Stability of Hafnia-Based Materials at Ultra-High Temperature</li><li>Joining of AlN and Al with Compositional Graded Layer by Centrifugal Mixed-Powder Method</li><li>Tribological Properties of Aluminum and Silicon Borides at High Temperatures</li><li>Spark Plasma Sintering of High-Energy Ball-Milled ZrB<sub>2</sub> and HfB<sub>2</sub> Powders with 20vol% SiC</li><li>Multilayer and Fiber Metal Laminate Materials Hydro-Bulging</li><li>Rapid Synthesis of Li<sub>2</sub>O-(Nb/Ta)<sub>2</sub>O<sub>5</sub>-TiO<sub>2</sub> Solid Solution Having Superstructure by Smart Processing Techniques</li><li>Texture and Mechanical Properties of IF Steel/Polyethylene/IF Steel Laminates</li><li>Copper Effect on Mechanical Properties of Al-CNF Composite Material Elaborated by Liquid Metallurgy with Induction Melting</li><li>Dislocation Densities in Dispersion-Strengthened Copper with Aluminum Oxide from X-Ray Line Profile Analysis</li><li>Comparison of the Hot Working Behavior of Wrought, Selective Laser Melted and Electron Beam Melted Ti-6Al-4V</li><li>Control of Mechanical Properties of Functionally Graded Dual-Nanoparticle-Reinforced Composites</li><li>Development of Ultra-High Temperature Ceramics: From Monoliths to Composites</li><li>Wear Behavior of Cenosphere Dispersed Titanium Composite Foam Developed by Powder Metallurgy Route</li><li>Characteristics and Formation Mechanism of the Interface of Mg/Al Bimetallic Composites Prepared by Lost Foam Casting</li><li>Particle Distribution and Mechanical Properties of Nano-SiC<sub>P</sub>/Al-Cu Composites</li><li>Chapter 5: Electronics Industry. Materials and Processing Technologies</li><li>Investigation of Crack Initiation in Glass Substrate by Residual Stress Analysis</li><li>Effect of Cooling Rate on Intermetallic Compounds Formation in Sn-Ag-Cu-In Solder</li><li>Tensile and Fatigue Properties of Miniature Size Specimen of Sn-3.5Ag-0.5Cu-0.07Ni-0.01Ge Lead-Free Solder</li><li>A Study on Reliability of Pillar-Shaped Intermetallic Compounds Dispersed Lead-Free Solder Joint</li><li>Effects of Sputtering Pressure on (ZnO)<sub>x</sub>(InN)<sub>1-x</sub> Crystal Film Growth at 450 degreesC</li><li>Photoluminescence of (ZnO)<sub>0.82</sub>(InN)<sub>0.18</sub> Films: Incident Light Angle Dependence</li><li>Cross-Correlation Analysis of Fluctuations of Interactions between Nanoparticles and Low Pressure Reactive Plasmas</li><li>Differences in Morphologies of GaN-Based Nanocrystals Grown on Metal-Foils and Multi-Crystalline Si Substrates</li><li>Internal Stress Evaluation on SiC Dices after SLID Process</li><li>Electron Diffusion Length and Charge Separation Efficiency in Nanostructured Ternary Metal Vanadate Photoelectrodes</li><li>Chapter 6: Additive Manufacturing. Materials and Technologies</li><li>Towards Additive Manufacturing: Pumping Flow Rate with Time-Dependent Material Rheology in 3D Cementitious Material Printing</li><li>Additive Manufacturing of Titanium Parts Using 3D Plasma Metal Deposition</li><li>One Photon 3D Polymerization via Direct Laser Writing</li><li>Significant Benefits of 3D Screen Printing for Manufacturing Micro-Channel Heat Exchangers</li><li>Design of Additively Manufactured Lattice Structures for Tissue Regeneration</li><li>Heat Treatment Behavior of the 18Ni300 Maraging Steel Additively Manufactured by Selective Laser Melting</li><li>Compositional Optimization of In718 Superalloy Powder for Additive Manufacturing</li><li>Additive Manufacturing of a CNT/Al6Si Composite with the Nanolaminated Architecture via Cold Spray Deposition</li><li>Direct Laser Additive Manufacturing of Ceramics by Powder Deposition</li><li>Fabrication and Tailoring Interface Structure of Diamond/Al(and Al12Si) Composites for Heat Sink Applications by Vacuum Hot Pressing and Selective Laser Melting</li><li>Developing New Materials for Electron Beam Melting: Experiences and Challenges</li><li>Three Dimensional Smart Processing by Ultra Violet Laser Lithography of Ceramic Additive Manufacturing</li><li>Chapter 7: Chemical Production. Materials and Technologies</li><li>Hydrogen Release from Oxidized Titanium Hydride</li><li>Increasing the Electrical Conductivity of Layered Double Hydroxides by Intercalation of Ionic Liquids</li><li>Nickel Supported Modified Ceria Zirconia Lanthanum/ Praseodymium/Yttrium Oxides Catalysts for Syngas Production through Dry Methane Reforming</li><li>Engineering Solutions in Scale-Up and Tank Design for Metal Hydrides</li><li>The Influence of Gas Diffusion Media Morphology on Hydrogen Fuel Cell Performance</li><li>Superhydrophobic and Highly Oleophilic Polystyrene Fibers (PS) with Delayed Freezing Time and Effective Oil Adsorption</li><li>New Sustainable Hybrid Porous Materials for Air Particulate Matter Trapping</li><li>Synthesis of Fluorescent Ag Nanoclusters for Sensing and Imaging Applications</li><li>Polymer Interphases in Adhesively Bonded Joints - Origin, Properties and Methods for Characterization</li><li>Chapter 8: Theoretical Analysis and Numerical Simulation of Properties and Behavior of Materials</li><li>A Theoretical Analysis of the Rheological Parameters Associated with DDRX</li><li>The Avrami Kinetics of Dynamic Recrystallization in Nickel-Niobium Alloys</li><li>Forensic Analyses of Stress-Strain Diagrams to Evaluate Contributions from Microstructure</li><li>A Numerical Thermal Analysis of the Heating Process of Large Size Forged Ingots</li><li>Prediction of Steel Transformation Temperatures Using Thermodynamic Modeling and Design of Experiments (DOE)</li><li>Multiscale Approach for the Modeling of Chemo-Magneto-Thermo-Mechanical Couplings - Reversible Framework</li><li>Energy of Small Angle Tilt Boundary in Al</li><li>Structural, Electronic and Mechanical Properties of Perovskite Oxides LaMO<sub>3</sub> (M = Mn, Ni) Compounds in the High and Low Symmetric Phases by First Principle Calculation</li><li>Mastering of the Filling Stage in Low Pressure Sand Casting Process</li><li>Use of a Zener Approximation for Heat Transfer Analyses of Quasi One-Dimensional Welding Problems</li><li>Ductility and Stability in Metallic Materials</li><li>Hot Forming Optimization of ZK30 Magnesium Alloy</li><li>Evaluation of a Characteristic Temperature in the Relaxation of Metallic Glass Forming Liquids</li><li>Development of an Anti-Trapping Current for Phase Field Models Using Arbitrary CALPHAD Thermodynamics</li><li>On the Challenges and Prospects of the Superplastic Forming Process</li><li>A First-Principles Study of the Al (001)/Fe(0-11) Interface</li><li>Metaheuristic <i>Ab Initio</i> Optimum Search for Doping Effects in Nanocarbons</li><li>3D FEM Simulation of the Effect of Cooling Rate on SDAS and Macrosegregation of a High Strength Steel</li><li>Chapter 9: Technological Tools and Measurements</li><li>Wear Behaviour of Two Different Cemented Carbide Grades in Turning 316 L Stainless Steel</li><li>Study on the Statistical Errors in X-Ray Stress Measurement with Two-Dimensional Detector</li><li>Evaluation of Railway Rails Suffered from Rolling Contact Fatigue Using X-Ray Generalized cos? Method</li><li>Portable System for the Measure of Efficiency in Arc Welding Processes</li><li>Proving the Preclusion of Data Manipulation Using Parallel Data Acquisition in Chromatography</li><li>SteBLife - The Enhanced Short-Time Evaluation Procedure for Materials Fatigue Data Generation</li><li>Microstructure Characterisation of Advanced Materials via 2D and 3D X-Ray Refraction Techniques</li><li>Study of Consistency between Two-Dimensional, sin<sup>2</sup><i>?</i>, cos<i>?</i> and Fourier Transformation Methods for X-Ray Residual Stress Measurement by Debye Ring Simulation</li><li>Recycle Processor for Commercial Aircraft Wing Trimmings</li><li>Strength and Axial Behavior of Cellular Lightweight Concrete-Filled Steel Rectangular Tube Columns under Axial Compression</li><li>Implementation and Use of a Laser-Ultrasonic System in a Deformation- and Quenching Dilatometer</li><li>Quality Assessment of Friction Stir Welded Joints - Using the Fundamental Anti-Symmetric Lamb Wave Mode</li><li>Chapter 10: Biomaterials and Biomedical Technologies</li><li>Validation of Material Parameters of Collagen Compositions for the Application as a Bioink</li><li>Improved Syringe Extruder for Improved Processing of Biological Materials</li><li>Fabrication and Validation by Micromilling for Bioreactor Prototyping</li><li>Analyte Tracking for Novel Bio-Applications</li><li>Mechanical Performance of Titanium Alloys with Added Lightweight Interstitial Element for Biomedical Applications</li><li>Microstructure, Texture and Mechanical Properties after Cold Working and Annealing in a Biomedical Ti-Nb-Ta Alloy</li><li>Manufacturing of Biomedical Ti-Based Alloys with High Oxygen Content and Various Amount of Beta-Stabilizing Elements</li><li>The Improvement of Durability of Biodegradable Magnesium Alloy by Using Bio-Inspired Coating</li><li>Biofunctionalization of Ceramic Implant Surfaces to Improve their Bone Ingrowth Behavior</li><li>Laser Shock Processing as an Advanced Technique for the Surface and Mechanical Resistance Properties Modification of Bioabsorbable Magnesium Alloys</li><li>Tissue Engineering Strategies to Promote Bone Repair</li><li>Online Glucose Measurement in DMEM for <i>In Vitro</i> Cell Culture</li><li>Control of Cell Adhesion on Titanium Dioxide by Light Irradiation</li><li>Monitoring of Cytotoxic Induced Cellular Displacements by Utilizing Electronic Speckle Pattern Interferometry</li><li>Sample Analysis for Novel Medical Applications</li><li>Development of a Smartphone Based Reader for the Quantitative Analysis of Lateral Flow Assays</li><li>Oxidative Plasma Treatment of Fluorocarbon Surfaces for Blood-Contacting Applications</li></ul>
System requirements
File format: PDF
Copy protection: without DRM (Digital Rights Management)
System requirements:
- Computer (Windows; MacOS X; Linux): Use the free software Adobe Reader, Adobe Digital Editions, or any other PDF viewer of your choice (see eBook Help).
- Tablet/Smartphone (Android; iOS): Install the free app Adobe Digital Editions or another reading app for eBooks, e.g., PocketBook (see eBook Help).
- E-reader: Bookeen, Kobo, Pocketbook, Sony, Tolino and many more (only limited: Kindle).
The file format PDF always displays a book page identically on any hardware. This makes PDF suitable for complex layouts such as those used in textbooks and reference books (images, tables, columns, footnotes). Unfortunately, on the small screens of e-readers or smartphones, PDFs are rather annoying, requiring too much scrolling.
This eBook does not use copy protection or Digital Rights Management.
For more information, see our eBook Help page.