High-Performance Ceramics VII

Preface
Chapter 1: Novel Processing and Manufacturing
Preparation and Characterization of High Purity ?-SiC Powder
Synthesis of Fiber-Like Si? by Carbothermal Reduction of Used Silica Bricks
Microwave Synthesis of Nano SiC Doping Mg(B1-2x(SiC)x)2 Superconductor and Superconductivity
Preparation of Both Reactive ?-Si3N4 and SiC Mixed Powder in Flame-Isolation Nitridation Shuttle Kiln
Synthesis of AlN Powder from Precipitation Precursor by Carbon Thermal Reduction in Flowing Nitrogen
Single Phase Ti2AlC Powder Synthesized from Ti-Al-0.6~0.9TiC-0.1Sn Mixture
Synthesis of Ti(C,N) Powder via CRN Method from Rutile/Carbon Mixtures
Influence of the Dispersant on the Bead Milling of Alumina
Synthesis and Surface Characterization of a Silica White Prepared from High Si:Al Fine Powder
Extraordinary Adsorption Properties of Nano Porous Hydrophobic Silica Aerogels
Preparation of Mullite Nanocomposites Powders by the Hydrothermal Crystallization Method from Coal Gangue
Effects of Solvents on Synthesis and Dispersion of Zircon Powder via Non-Hydrolytic Sol-Gel Route
Preparation of Rare-Earth Doped Zirconia Nanoparticles via Supercritical Hydrothermal Method for Luminescence Properties
Fabrication of Graphene/Zirconia Nanocomposite by Mixing Graphite Oxide and Zirconia Nanopowders and Pressureless Sintering
Study on Properties of Slurry for Making Zirconia Fiber
Synthesis of Amorphous Al2O3-ZrO2 Powders Prepared by Citric Acid Gel Process
Low Temperature Molten Salt Synthesis of Nano Crystalline MgAl2O4
Synthesis and Characterization of Magnetite Particles by Co-Precipitation Method
Synthesis and Characterization of Spinel-Type NiCr2O4 Nanocrystalline
Effect of MgO and NH4OH on Formation of 5Mg(OH)2?MgSO4?3H2O Whiskers
Hydrothermal Synthesis of Yttrium Hydroxide Nanotubes
Preparation and Thermodynamic Study of Self-Dispersal Nano-AIOOH
Synthesis and Optical Properties of Single-Crystalline Silicon Nitride Nanowires with Controlled Dimensionality
Preparation and Characterization of Calcium Silicate Slag Based Lightweight Wall Materials
Preparation and Properties of Nano-Hydroxyapatite Derived from Sol-Gel Method for Cu2+ Polluted Water
Reverse Microemulsion Synthesis of Hydroxyapatite Nanoparticles and Adsorption Performance Study
Phase Behaviors of Talc Minerals in Carbothermal Reduction Process
Cryomilling and Characterization of Metal/Ceramic Powders
Synthesis of Cubic Ni Nanoparticles by Electric Current Heating Method Using Ni Wire
Effects of Different Reducing Agents and Protective Agents on the Preparation of Nano-Silver Powder
Synthesis and Characterization of Silver-Coated Copper Powder Layer
Synthesis and Characterization of Nanocrystalline PZT Powders by a Simple Sol-Gel Method
Effect of Dispersant Content on Nanograined BME MLCC Powder Prepared by Aqueous Chemical Coating Method
Preparation of Ultra-Fine La3NbO7 Powder by Solid State Reaction
Synthesis of Cobalt Sulfide Nanocrystallites via an Efficient Microwave Hydrothermal Process
Solvothermal Growth of Cobalt Oxide Hexagon Nanodiscs
Synthesis of n-Hexadecylphosphonic Acid-Coated Monodisperse Fe3O4 Superparamagnetic Nanoparticles
Structure and Luminescence Characteristics of Terbium Hydroxide Nanosheets Doped with Eu3+
Luminescent Properties of MgLaLiSi2O7:Eu3+ Phosphors via Sol-Gel Process
Preparation and Luminescence of ZnAl2O4:Mn Phosphors
Preparation and Photo-Catalysis Properties of Fe3O4/TiO2 Nanocomposite
TiO2 Whisker Prepared with Tataniferous Blast-Furnance
Hydrothermal Synthesis and Characterization of LiZr2(PO4)3
Effect of Acticarbon on the Electrochemical Characteristics of LiFePO4 Battery Powder by Microwave Hydrothermal
Effect of Cd2+ Concentration on the CdS Crystallites Prepared by Microwave Hydrothermal Process
Synthesis of V2O5 Powders by EDTA Assistance Ultrasound Sol-Gel Process
Synthesis of In2Se3/CuSe Composite Powder by Solvothermal Method
Synthesis and Characterization the Intercalation Compound of SnS2-Ethylenediamine by Hydrothermal Reaction
Synthesis and Characterization of SnS Flake-Like Microcrystals with a Microwave Hydrothermal Processing
Influence of S/La Molar Ratio on the Morphology and Optical Property of La2S3 Microcrystalline Prepared by Microwave Hydrothermal
Synthesis of LiV3O8 Crystallites via an Improved Citric Acid Assisted Sol-Gel Method
Effect of pH Value on Preparation of La2CuO4 Microcrystallites Synthesized by Sol-Gel Process
Phase Control of Nanosized NaYF4 Upconversion Particles
Preparation and Property Characterization of Talc/Phthalocyanine Blue Composite Powder
Preparing and Characterization of Hollow Ceramic Microspheres
Ba-Ferrites Hollow Microspheres Prepared by Self-Reactive Flame Spraying Method
Fabrication and Characterization of ZrO2 Hollow Spheres
Preparation of Nanometer Carbon Spheres by Hydrothermal Synthesis Method
Effect of Dispersant on the Measurement of Particle Size Distribution of Titanium Dioxide
Controlled Synthesis of Hierarchical Flower-Like CuS Spheres by a Facile Microwave Hydrothermal Method
Preparation of ZrO2 Micro Beads by Sol-Gel Method
Synthesis of Carbon Nanotubes from Silicalite-1-Coated Substrates
Preparation and Properties of Rigid Polyurethane Foams Reinforced by Sepiolite Minerals Nanofibers
Preparation and Characterization of Coated Carbon Black Pigment
Wet Foam Stabilized by Amphiphiles to Tailor the Microstructure of Porous Ceramics
Preparation of M-AlN Suspensions for Aqueous Gelcasting
Reaction Formed SiC Prepared by Room Temperature Freezing Casting
The Preparation and Assessment of the Rigid Aerogel Insulation Composites
Synthesis of Si-N-C Ceramic Composites by Pyrolysis of Polysilazane and Polycarbosilane
High-Strength Porous YSZ Ceramics Fabricated by TBA-Based Gelcasting with High Solid Loading Slurry
Preparation and Microstructures of Nano-Porous SiO2 Thermal Insulation Materials by Freeze-Casting of SiO2 in TBA/H2O Suspensions
Making Nano-Porous SiO2 Insulation through Filter-Pressing of Foamed Slurry
Preparation of Thin Cordierite Sheets by Aqueous Tape Casting
Calculation of Tape Thickness for Ceramic Tape Casting
Novel Zn-Doped SnO2 Hierarchical Architectures: Facile Synthesis, Structural Characterization and Enhanced Photocatalytic Property
Alumina Ceramic Texturing Induced by High Magnetic Field and its Microstructure
Microstructures and Properties of Solidified TiC-TiB2 Ceramic Composites with Increasing Cr Metallic Binder Prepared by Combustion Synthesis in High-Gravity Field
Fabrication of Bulk Ceramics by High-Gravity Combustion Synthesis
Fusion-Induced Diffusion Joints of Solidified TiC-TiB2 Ceramic with Stainless Steel and Ti-6Al-4V Alloy Achieved by Combustion Synthesis in High-Gravity Field
Fabrication of Bi-2212 Films on Ag Substrate by Dip-Coating Method
Structural and Optical Properties of TiO2 Nanoarray Films Prepared by Liquid Phase Deposition
Influence of pH Value on the Phases, Morphologies and Optical Properties of Sm2S3 Thin Films
Enhanced Performance of Alkaline Niobate-Based Ceramics Manufactured by Two-Step Sintering
Effects of Sintering Process on the Properties of Ti3SiC2/Cu Composite
Microwave Sintered Porous Mullite Composite
Phase Transformation Temperature Adjustment of Calcium Chloride Hexahydrate
Direct Write Assembly of 3-Dimensional Structures with Aqueous-Based Piezoelectric Inks
Gel Casting of Large-Sized, Complex-Shaped RBSC Component
Gelcasting of Fused Quartz Crucible with Large Scale
Preparation and Mechanism of Interconnected Mesoporous Carbon Monoliths from Phenolic Resin/Ethylene Glycol Mixtures
Superplastic Forming of Oxide Ceramic Composite
The Effects of Different Slurry on the Joining Characteristics of SiC Green Body
Microstructure and Mechanical Performances of C/C Composite and TC4 Alloy Brazed Joints
Effect of Additive Silicon Powder on Physical Property of Cold Ramming Paste for Aluminum Electrolysis
Chapter 2: Engineering Ceramics and Ceramic Composites
Prediction of Critical Pressure in the Preparation of Composites by Vacuum - Pressure Infiltration Process
Debinding Behaviors and Mechanism of Injection Molded ZrO2 Ceramics Using Kerosene as Solvents
Aging Properties of Yttria-Stabilized Zirconia Ceramics
The Influence of Y2O3 Calcined Temperature on the Performance of ZrO2
Zirconia Fiber Memberance Prepared by Electrospinning
Bond Strength of Different Adhesive Luting Materials to Zirconia Ceramics
Solid Particle Erosion Behavior of NiCr-Al2O3-ZrO2 (8Y) Ceramic Composites
Mechanical Properties of ZrO2-LaMgAl11O19 Ceramics
Fabrication and Optical Properties of Sm2Zr2O7-NiCr2O4
Modeling the Cracking Process of the YSZ Thermal Barrier Coating under the Thermal Shocking Loads
Design, Preparation and Thermal Properties of (La0.4Sm0.5Yb0.1)2Zr2O7 Ceramic for Thermal Barrier Coatings
Elastic Properties of Spark Plasma Sintered (SPS) ZrB2/SiC-Sm2Zr2O7 Composites
The Gibbs Energy Description of Nd:YAG System
A Simple Laminated Alumina Based Composite with High Work of Fracture
CASTEP Calculation of Surface Energy of ?-Al2O3
Anti-Bullet Property of Encapsulated AD95 Al2O3 Ceramic
Effect of Different Composite Additives on Thermal Conductivity of Corundum Ceramics
Formation and Evolution of Tribo-Layer on Al2O3 and Al2O3-Based Ceramics in Sliding against Si3N4 under Dry Sliding
Corrosion Behavior of Al2O3 Ceramics in the Acid and Alkaline Solutions
Hydrothermal Corrosion of Alumina Ceramics under Static and Quasi-Dynamic Conditions
Influence of the Two Metal Dopant Improves the Specific Surface Area of Alumina in Catalyst Support
Fabrication and Dielectric Properties of Fe-CNT/Al2O3 Bulk Composite Materials
Research the Performance of Alumina Insulation Material by Freeze-Drying
The Screening of Modifying Alumina Used in Automotive Catalyst
Effect of Calcination Temperature on Phase Transformation and Microstructure of Al2O3/GdAlO3 Compound Powder Prepared by Co-Precipitation Method
Fabrication and Properties of CaAl12O19-Al2O3 Composite Ceramics
The Effects of Density on Thermal Conductivity of Al2O3 Fiber Composite Papers
Dielectric Properties of Silica Fiber Reinforced Silica Composites
Effect of Al3+ Additions on the Properties of Quartz Ceramics
3D Interconnetive Porous Silica Ceramics Prepared by Gel Casting with Egg White Protein as a Foaming Agent
Disposing of Silica Fiber' Surface
Synthesis of Methacryloxypropyltrimethoxysilane Grafting Silica Cryogels Using Xylene as Solvent
Synthesis of Plugged Mesoporous SBA-15-Type Silicas from Sodium Silicate
Effect of Pyrophyllite on the Mullite Generation in Ternary Porcelain System
Fabrication of Porous Mullite Ceramics with High Porosity Using Foam-Gelcasting
Fabrication and Properties of Mullite Fiber-Reinforced Porous Mullite Ceramics
Fabrication and Properties of Porous Anorthite/Mullite Ceramics
Reinforcement of Porcelain by Mullite Fiber for Power Applications
A Novel Way to Synthesis Magnesium Aluminate Spinel Powders by Polymer Gel Reaction
Properties of Boehmite AlO(OH) Nanoparticles as the Coatings and Fillers
Thermal Properties of Magnesium Hydroxide Using First-Principles Method
Rare Earth and Perovskite Composite Ceramics Applied for the Thermistor with Wide Temperature Range
Preparation and Properties of MgAl2O4-CaAl12O19 High Temperature Composite
Hollow Multiphase Ceramic Microspheres of Al+Cr2O3+SiO2 System Prepared by Self-Reaction Quenching Technology
Synthesis and Characterization of Double Pore Size Multiphase Materials from Waste Aluminum Slag and Activated Carbon
Effect of Al2O3 Addition on Microstructure, Thermal Expansion and Mechanical Properties of Ta2O5 Ceramics
High-Temperature Chemical Stability of Hf6Ta2O17 Ceramic for Thermal Barrier Coatings
Microstructure and Properties of Laser Cladding Cu-TiB2 Composite Coating on Copper
Ion Irradiation Effects on Ho2+xTi2-xO7-x/2 (x=0, 0.4 and 0.67)
Study on Mineral Composition and Main Mineral Morphology of Bauxite from ZhongXiang, HuBei Province
Mineral Compositions and Textures of Jadeite Orebody and its Country Rock in Nammaw, Myanmar
Colorimetry Study on Red Tourmaline Color Genesis
Preparation and Characterization of Activated Sericite Modified by Fluorosilicate and Acid
Evaluation of Firing Temperature of the Bangsan Porcelain
Synthesize Ti3SiC2 and Ti3SiC2-Diamond Composites at High Pressure and High Temperature
Synthesize Ti3SiC2 from TiH2 by Pressureless Sintering
Fabrication and Properties of Cf/Ti3SiC2-SiC Composites Using Ti3SiC2 as Inert Filler
Microstructures, Properties and Fracture Behavior of Solidified TiC-TiB2 Composites with Increasing Content of TiB2
Crystal Growth, Fracture Behavior and Toughening of Rapidly-Solidified TiC-TiB2 Prepared by Combustion Synthesis in High-Gravity Field
Theoretical Calculation of Crystal Cohesive Energy of (ZrTi)B2 Solid-Solutions
Tailoring Plate-Like Grained ZrB2 Ceramic via a Strong Magnetic Field Alignment Method Followed by Spark Plasma Sintering
Effect of BN Short Fiber Content on Mechanical Properties of ZrB2-SiC UHTCs
Ablation Property of ZrB2-SiC Composite Sharp Leading Edges with Varying Radiuses of Curvature under Oxy-Acetylene Torch
Fabrication of ZrC-SiC Powders by Means of Liquid Precursor Conversion Method Using ZrC Precursor and Polycarbosilane
Preparation and Assessment of C/C-ZrB2-SiC Ultra-High Temperature Ceramics
Effect of High-Energy Ball Milling of ZrB2 Powder on the Microstructure and Mechanical Properties of ZrB2-SiC Ceramics
Study on ZrB2-SiC Prepared by Field Assisted Sintering
Effect of Adding Phase on the Properties of ZrB2 Based Ultra-High-Temperature Ceramics
Preparation and Properties of ZrB2-Cu Composites by Spark Plasma Sintering
Electrical and Mechanical Properties of ZrB2-Based Composite Ceramic
Investigation of Microstructure and Thermal Shock Resistance of the B4C/BN Composites Fabricated by Hot-Pressing Process
A Multilayer Coating Method to Prepare Borosilicate Glass-Aluminum Composite Coating on Cubic Boron Nitride Particle
Influence of the Content of B4C on Microstructure and Oxidation Resistance of Carbon/Carbon Composites Modified by a Sol-Gel/Solvothermal Process
Effect of Carbon Fibers' Surface Modification on the In Situ Growth of Carbon Nanotubes
Influence of Adding ?-Si? on the Performance of ?-Si? Pressureless Sintering Ceramics
Effect of Aging pH Value on the Properties of Porous SiC Ceramics Produced through Coat-Mix Process
Improved Oxidation Resistance of Si?-Based Ceramic Matrix Composites by In Situ Reaction with Si3N4 Filler
The Dispersion of SiC Nanopowders in Ethanol
Preparation and Properties of SiC Nanocrystallite Reinforced Amorphous Si-B-C-N Ceramics
Silicon Carbide Composites Deposited in Silicon Carbide Whiskers by CVI Process
Effects of Carbon Fiber Dispersion on Bending Property of Cf/SiC Brake Materials
Mechanical Properties of Short Carbon Fiber-Reinforced SiC-Matrix Composites and Correlation to Fibers
Preparation of Cf/SiC Composites by Chemical Liquid-Vapor Deposition Process
Design on Thermal Protection Structure of C/SiC Lattice Composite Materials
Microstructures and Mechanical Properties of SiC-TiB2 Composite Prepared by Pressureless Sintering
Fabrication of High Strength ?-SiAlON/BN Composition Ceramics by Hot Pressing
Porous Si3N4 Fabricated Using Benzoic Acid as Pore-Forming Agent
Preparation of Silicon Nitride Porous Ceramics
Preparation and Properties of Porous Si3N4/SiO2/BN Composite Ceramics
Electric Conductive Si3N4/TiN Composite Ceramic Manufactured by Liquid-Qhase Sintering
Dispersion of Si3N4 Powders in Tert-Butyl Alcohol
Sintering Behavior and Properties of Si3N4 Ceramics with Yttrium Chloride Additive
Porous Nitride Ceramic Composites with Low-Dielectric Properties
Dielectric and Mechanical Properties of Porous Si3N4-BN Ceramic Composites
Preparation & Characterization of h-BN Coatings on Ti-Based Substrate Synthesized via the PDCs Route: Tribological Applications in Severe Conditions
First-Principles Investigation of Electronic Structural and Optical Properties of Rare Earth Doped ?-Si3N4 Crystals
High Performance Porous Wave-Transmitting Silicon Nitride Ceramics by Gel-Casting Technique
Pressureless Sintering of Silicon Nitride Porous Ceramics with High Porosity and Bimodal Pore Structure
The Influence of Sintering Temperature on Properties and Microstructure of TiN/Si3N4 Composite
First Principles Investigation of Electronic Structure, Chemical Bonding, Elastic and Optical Properties of Novel Rhenium Nitrides
Thermal Expansion of Anti-Perovskite Mn3Zn1-xSnxN Compounds
Synthesis of Polyceriborosilazane via Substitution and Polymerization and Pyrolysis to SiBCN(Ce) Ceramics
Fabrication and Properties of AlN/CNT Composite Ceramics
High Frequency Dielectric Properties and Thermal Conductivity of AlN-BN Composites by Spark Plasma Sintering
Fabrication and Properties of Al2O3-SiC/Sialon Composite Refractories
Fabrication of the SiOC/HfO2 Ceramic Composites by the Sol-Gel Method
Carbon Fiber Reinforced Phosphate Porous Ceramic Composites
Study on Thermal Insulating Behavior of Silica Glass Fiber/Aluminum Phosphate Composite
Ultrafine WC-Ni-SiCw Cemented Carbides Fabricated by Spark Plasma Sintering
WC-Ni-SiCw Alloys Prepared by Hot-Pressed Sintering
TiCN-Based Cermets Strengthened with SiC Nano-Whiskers by Spark Plasma Sintering
Preparation and Properties of Polyalcohol Phase Change Material for Insulation
Preparation of Calcium Hexaluminate Using Al2O3 and White Beach Sand from Western Australia
Preparation and Characterization of Amorphous SiO2 Coating SiCp/Cu Composites
The Effect of SiC Surface Treatment on the Interface Bonding Behavior of SiC/Cu Composite Particles
Two Fracture Dynamics Problems of Fiber Reinforced Ceramics
Evaluating Adhesion of Ceramic Coatings by Scratch Testing
The Pyrolysis Processing of Polycarbosilane Studied by TG, XRF, IR, XRD, and XPS
GIAXD and XPS Characterization of sp3C Doped SiC Superhard Nanocomposite Film
Anisotropic Mechanical and Thermal Properties of Nd2SrAl2O7
Experimental Study and Numerical Simulation on Fatigue Crack Growth Behavior of GH4133B Superalloy
Thermophysical and Mechanical Properties of Carbonated Hydroxyapatite
Thermal Stability and Structure of Tellurite Glass
Preparation of Light-Weight Forsterite Insulation Materials Through Extrusion Processing
Preparation of Light-Weight Alumina-Spinel Refractory by Foaming Process
Influence of Calcium Addition on the Chemical Durability of the Model Alumino-Silicate Glasses in Aqueous Solutions
Transparent Oxyfluoride Glass-Ceramics Containing CaF2 Nano-Crystalline Phase
Characteristics of CAS and Bi-Based Glass Frit as the Inorganic Binder of Alumina Insulation Slurry
Preparation and Properties of Sintering Brick from Iron Tailings
Preparation of Superhydrophobic SiO2 Coating on Stainless Steel Substrate
Fabrication of Superhydrophobic Surface of TiO2 through Sol-Gel Process on Stainless Steel Substrate
Structure and Growth Kinetics Features of Ceramic Coatings Produced on Ti-6Al-4V Alloy by Plasma Arc Oxidation
Microstructural Evolution and Mechanical Properties of Vertical-Cracked Thermal Barrier Coatings in Thermal Exposure
Effect of Anisotropic Conductive Properties on Heat Transfer and Temperature Distribution of Coatings and Substrates
Modeling Dynamic Behaviors of Reticulated Ceramic/Metal Composites (RCMC)
Thermal Cycling Behavior of Sm2Zr2O7 Ceramics Thermal Barrier Coatings by APS
Preparation and Investigation of High Emissivity Coatings Prepared by Plasma Spraying
Influences of Calcination Ambiences on Morphologies, Phase Composition and Contents of the Elements of Ceramic Coatings on Ti Alloy by Micro-Arc Oxidation
ZrSiO4/SiC Oxidation Protective Coating for Carbon/Carbon Composites Prepared by Hydrothermal Electrophoretic Deposition
Silica Coatings Pigmented with Core-Shell Particles for High-Temperature Radiation Heat Shields
Influences of Argon Ambience on Phase Composition and High Temperature Oxidation Resistance Property of Ceramic Coatings on Ti Alloy by Micro-Arc Oxidation
The Composition and Hardness of the Coating Containing Zirconia Produced by Micro-Arc Oxidation on Aluminium Alloy
Fabrication of Superhydrophobic Coatings on Copper Substrate
Kinetic Analysis of Sulfation of Fe-Ca Based Sorbent for FGD
The Comprehensive Evaluation on Financial Performance of the Ceramic Company Based on Principal Component Analysis
Chapter 3: Electrical, Magnetic and Optical Ceramics
Microstructural Characterization of Diamond/SiC Composites Fabricated by RVI
Hot-Pressed Sintered SiC-Based Composites for Microwave Absorbing Application
Develop Dual-Mode DGS Bandpass Filters Using High Quality Factor Aluminum Oxide Ceramic Substrates
Effects of Technique Parameters on Gelating Process of Cordierite Ceramics Derived from Sol-Microemulsion-Gel Method
Effective Electro-Magnetic Parameters for Microwave Absorbing Ceramics
Analysis of Absorption Properties for Magnetism-Absorbing Agents Mixed with Semiconductor Particulate
Comparison Analysis of Absorption Properties for Microwave Absorbent
Preparation of Nano BaTiO3-Based Dielectric Ceramics by Different Sintering Methods
The Preparation of Flexible Substrate Using BaTiO3/Polymer Composites for Application in High Frequency Devices
Effect of Bi2O3-B2O3-CuO Additives on Dielectric Properties and Energy Storage of BaTiO3 Ceramics
Antimony Doping Effect on Barium Strontium Titanate
Microwave Properties in BaO-TiO2 System Added by ZrO2 and WO3
Synthesis and Characterization of BaTiO3-(Bi0.5Na0.5)TiO3 Solid Solution Based Dielectric Ceramics
On Preparation of SrTiO3 Thin Films with Self-Assembled Monolayers by Liquid Phase Deposition and its Dielectric Properties
Effect of Annealing Treatments on the Physical Characteristics of (Ca0.8Sr0.2)TiO3 Thin Films by Sol-Gel Method
Synthesis of Bismuth Titanate Thin Films by Liquid-Phase Self-Assembled Monolayers
Synthesis and Characteristics of MgO Coated BST-Mg2TiO4 Composite Ceramics
Influence of ZnO and Nb2O5 Additions on Sintering Behavior and Microwave Dielectric Properties of (Mg0.95Ca0.05 )TiO3 Ceramics
Effect of P-Zn-La-Si-Al-N-Mg-Yb Oxides Additives on Sintering and Microwave Dielectric Behaviors of Nd(Co1/2Ti1/2)O3 Ceramics
Application of AC Impedance Spectroscopy for Characterization of BiNbO4 Ceramics
Preparation and Microwave Dielectric Properties of Ca(Sm0.5Nb0.5)O3 Ceramics
Effect of Sintering Temperature on Structure and Dielectric Properties of BZN Ceramics
SAW Properties on X,Y,Z-Cut of Sr3(Nb,Ta)Ga3Si2O14 and Ca3(Nb,Ta)Ga3Si2O14 Piezoelectric Crystal
Fabrication and Study of BiNbO4 Ceramics
Effect of Pre-Calcined Method on Dielectric, Ferroelectric, and Piezoelectric Properties of Lead-Free Piezoelectric Lix(K0.5Na0.5)1-x(Nb0.8Ta0.2)O3 Ceramics
Effects of CuO Addition on the Microstructure and Microwave Dielectric Properties of MgTa2O6 Ceramics
Studies on Structural, Microwave Dielectric Properties, and Low-Temperature Sintering of 1.52Li2O-0.36Nb2O5-1.34TiO2 Ceramic
ZnTiO3 Doping Effect on Dielectric Properties of CCTO Ceramics via a Molten Salt Process
Dielectric Properties and Photocatalytic Activity of Single Phase BFO Prepared by Chemical Coprecipitation
Preparation and Dielectric Properties of Cr Doped Multiferroic BiFeO3
Properties of BiFeO3 Thin Films Prepared with Self-Assembled Monolayers by Liquid Phase Deposition
Preparation of Nd and Co Co-Doped BiFeO3 Thin Films Co-Doping Nd and Co by Sol-Gel Method
Density-Functional Studies of Cr Adsorbed on Polar ZnO Surfaces
Study on Electronic Properties of ZnO Doped with Cr, Mn and Co by First Principles
La Doped Layered Structure Low-Voltage ZnO Varistor
Solid-State Reaction and Gas Sensor Properties of Porous SnO2-In2O3 Composites
Donor Solid Solubility and Microstructure of Nb-Doped TiO2 Ceramic Varistor
B2O3-Doped ZnO-Pr6O11 Based Varistor Ceramics
Fabrication and Electrical Properties of Vanadium Pentoxide Fibres
Failure Behavior of PZT 95/5 under Direct Current, Pulsed Electric Field and Shock Compression
Synthesis and Electrical Properties of PZT/BaFe12O19 Multiferroic Ceramics
Design of the PTO/PZO Ferroelectric Superlattice Assembly
Effect of Glass Additive on Electrical Properties of PLZST Antiferroelectric Ceramics
The Electrocaloric Effect in BaTiO3 Thick Film Multilayer Structure at High Electric Field
Influence of Lanthanum Concentration on Properties of BLT Electroceramics
Electrical Characteristics and Microstructures of Pr6O11-Doped Bi4Ti3O12 Ceramics
Electrical and Physical Properties of the Bi3.25La0.75Ti3O12 Ferroelectric Thin Films Prepared by Conventional Temperature Annealing Process
Ferroelectric and Physical Characteristic of the La and V Doped on Bi4Ti3O12 Thin Film Prepared by RF Magnetron Sputtering Method
Ferroelectric Properties and Microstructures of Tb4O7-Doped Bi4Ti3O12 Thin Films
Electrical Properties and Microstructures of Tb4O7-Doped Bi4Ti3O12 Ceramics
Ferroelectric Properties of Bismuth Titanate Ceramics by Sm3+/V5+ Substitution
Piezoceramic Stack Actuators for Micropositioning Stage
Damping Properties of Epoxy-Embedded Piezoelectric Composites
Microstructure and Electrical Properties of Porous PZT Ceramics with Unidirectional Pore Channel Structure Fabricated by Freeze-Casting
Electrical and Physical Properties of Lead-Free (Na0.5K0.5)NbO3- Bi0.5(Na0.93K0.07)0.5TiO3 Ceramics
Sol-Gel Derived Li2O Doped BNT-BKT-BT Ceramics: Microstructure and Piezoelectric Properties
Preparation and Mechanical Energy Harvesting of BaTi0.9Zr0.1O3 Ceramic Nanofibers
Phase Transitions, Dielectric and Piezoelectric Properties of BiScO3-PbTiO3 Ceramic Solid Solutions
Enhanced Piezoelectric Properties of CaBi2Nb2O9 with Eu Modification and Templated Grain Growth
Processing and Electrical Properties of Ta and Li-Modified KNN-Based Lead-Free Thin Films Prepared by the RF Sputtering Technology
Impedance-Frequency Spectrum and Soft/Hard Doping Characteristics of Lead-Free K0.5Na0.5NbO3-LiSbO3-BiMnO3 Piezoelectric Ceramics
Influence of Sintering Conditions on Electric Performance of Textured 92BNT-6BT-2KNN Ceramics
Piezoelectric and Strain Properties of Strontium-Doped BZT-BCT Lead-Free Ceramics
Enhanced Piezoelectric Properties of (Na0.535K0.485)0.905Li0.095(Nb0.94Ta0.06)O3 -(Na0.5Bi0.5)TiO3 Lead-Free Piezoelectric Ceramics in the MPB Composition
Synthesis of Single-Crystalline Plate-Shaped K0.5Na0.5NbO3 Particles by Multi-Step Molten Salt Method
Influence of Ta5+ Doping on the Piezoelectric Properties of KNN Ceramics
Study on the Pressureless Sintering and Properties of (K0.5Na0.5)1-xLixNb1-yTayO3 Lead-Free Piezoelectric Ceramics
Doping Effect of W6+ Ions on Microstructural and Magnetic Properties of Mn-Zn Ferrites
Calcium Behaviors in MnZn Ferrite at Different Temperatures
Effects of Eu3+ Substitution on Nanosized Mn-Zn Ferrite Powders Synthesized by Combustion Processing
Molten Salt Synthesis of Ni0.5Zn0.5Fe2O4 Ferrites
Effect of SiO2 Content on the Electromagnetic Properties of CoZn-Z Type Barium Ferrite Prepared with Ferrous Micro-Beads
Fabrication of Iron Carbide and Nitride Ceramics with Controlled Magnetic Properties by the Non-Oxide Sol-Gel Process
The Structure and Ferromagnetic Properties of the Single Phase Bi0.95Eu0.05Fe0.95Co0.05O3 Nanoparticles Prepared by Sol-Gel
Room-Temperature Ferromagnetism in Co-Doped SrTiO3 Nanofibres
Study on Magnetic Liquids Properties for Sensor Design
Study on Magnetic Fluid Static Seal of Large Gap
Structure Design of Magnetic Fluid Static Seal at Large Diameter Flange
The Experimental Study of the Magnetic Fluid Damper Based on the Principle of Second-Order Buoyancy
Experimental Study on the Second-Order Buoyancy of Magnetic Fluid
Properties of Fluorinated Surfactant and Wetting Effect on Fe3O4 Nanoparticles
Study on the Structure of the Magnetic Fluid Damper
Effects of Magnetic Fluid on Magnetic Fluid Damper
Photoluminescence of ZrO2-ZnO Hybrid Nanotube Arrays Produced by Electrodeposition
Effects of Sm3+ Doping on the Photoluminescence Properties of Ca9Eu1-xSmx(VO4)7 Red-Emitting Phosphors
Effects of PEG on Properties of SrAl2O4:Eu2+, Dy3+ Long Afterglow Phosphors Prepared by Combustion Synthesis
The h-BN Protective Method Used for the Synthesis of Highly Uniform Spherical Si-Based Oxynitride Phosphors
Zinc Oxide Films Doped with Aluminum, Gallium or Tin Prepared by Dip Coating Process Using Ethanol Solution
The Synthesis of TiO2 Nanoarray Films on Glass Substrate by Anodic Oxidation Method
Photoluminescence Enhancement of CdS Nanocrystals Fabricated on Dithiocarbamate Functionalized PET Substrates
Luminescent Properties of Ce Doped LuAG Thin Films Prepared by Pechini Sol-Gel Method
Preparation and Characteristic Development of Nano Zn2SiO4: Mn Green Phosphors by La2O3 Doping
Relationship between Infrared Radiant Properties in Different Waveband and Structure of Fe-Co-Ni-Cr Spinels
Relationship between Structure and Infrared Radiation of Fe-Mn-O Ceramics
The Preparation of ZnO Nanopowders and Dye Sensitized Solar Cells By Sol-Gel Method
Light Scattering Properties for PLZT Transparent Ceramics of Different Zr/Ti Ratios
Recovery and Separation of Si and SiC in Wire Cutting Waste Slurry from Photovoltaic Silicon
Fabrication of ZnO Nanospheres and Application to Dye-Sensitized Solar Cells
Chapter 4: Ceramics for Electrochemical, Chemical and Energy Applications
Properties of Yttria-Stabilized-Zirconia Based Ceramic Composite Abradable Coatings
Preparation and Performance of Ni-YSZ/YSZ Co-Ceramic Using Multiple Gel-Tape Casting
Fabrication and Properties of Ba(Zr0.63Ce0.27)Y0.1O3-?/ZnO Electrolyte Materials
Electrical Conductivity and Characterization of CeO2 Doped 8YSZ Electrolyte with 2%wt CuO Doping
Fuel Processing in Direct Methanol and Carbon Deposition Behaviour on Ni/CeO2-ZnO Anodes for Solid Oxide Fuel Cell
A Study on Electrical Resistivity of BaO-CaO-SiO2-Al2O3 Seal Glass Used in Solid Oxide Electrolytic Cell (SOEC)
Application of Rape Pollen in Anode Substrates of Solid Oxide Fuel Cell
Synthesis of Sr2Fe1-xMnxNbO6-? Powders and their Stability as Electrode of Solid Oxide Electrolysis Cell
Hydrothermal Synthesis of Li2MnSiO4 Powders as a Cathode Material for Lithium Ion Cells
Mixtures of TiO2?0.2H2O and LiFePO4 as Li-ion Battery Cathode Materials
Application of Electrochemical Impedance Spectroscopy in Organic Solar Cells with Vertically Aligned TiO2 Nanorod Arrays as Buffer Layer
Magnetron Sputtering of Tantalum Oxide Thin Electrolyte Film for Electrochromic Applications
Application of Three-Dimensional ZnO Inverse Photonic Crystal in Dye-Sensitized Solar Cells
Photovoltaic Performance Optimization of Natural Trollius Sensitized Solar Cells
Stability of Dye Sensitized Solar Cells with Glass Frit Sealant
Effects of Surfactants on the Synthesis of Silica Aerogels Prepared by Ambient Pressure Drying
Manufacturing Technology for Niobium Oxide Electrolytic Capacitor and Several Correlative Mechanisms
An Energy Storage Material Fabricated by Coating Ba0.40Sr0.60TiO3 Nano Particles with Aluminum Oxide Doped with Zinc Oxide Shell
Facile Synthesis of Hierarchically Macro/Mesoporous Carbons by Polymerization-Induced Phase Separation Combined with Starch Template
The Thermoelectric Performance Enhancement of N-Type BiTeSe Alloys by Addition of ZnAlO
The Influence of RuO2 Addition on the Thermoelectric Properties of BiSbTe Alloys
Influence of Operational Parameters on Oil-Water Separation Efficiency of Titanium Oxide Modified Alpha-Alumina Microfiltration Membrane
Facile Fabrication of Open-Ended High Aspect-Ratio Anodic TiO2 Nanotube Films and their Applications
The Effect of Acid Etching Process on Surface Morphology and Electrocatalytic Capability of RuO2-IrO2-TiO2/Ti Anode
The Effect of Sintering Temperature on Microstructure and Electrocatalytic Capability of RuO2-IrO2-TiO2/Ti Anode
Synthesis of Nano-Sized SrTiO3 Photocatalyst by Sol-Gel Method
Photocatalytic Enhancement in Methylene Blue Degradation of TiO2 Photocatalysts via Graphene Hybridization
Influence of Microwave-Hydrothermal Temperature on Synthesis of TiO2 Thin Films on PMMA Substrates from Colloidal Anatase Aqueous Solutions
Load TiO2 or TiO2-N on the Porous Carbon
Pores Formation Mechanism of Undoped TiO2 Ceramics
Fabrication of Oxide Compound Nano-Films Materials by LBL Self-Assembly Technology
Super-Hydrophilic Lu3+-Doped TiO2 Photocatalysts for Self-Cleaning Applications
Effect of Testing Conditions on ZnFe2O4 Film Photoelectrocatalytic Properties
Enhanced Visible Light Activity of Ag-Loaded TiO2 Nanotube Arrays by AC Electrodeposition
Preparation of Nano-ZnFe2O4 Doped TiO2 Photocatalytic Films on Porous Hayddites
Fabrication of Li2TiO3 Ceramic Pebbles by Gelcasting Method
ZrC Oxidization Mechanism in Air
Chapter 5: Biomineralized Ceramics, Bioceramics and Bioinspired Designs
Biomimic Enamel Remineralization by Hybridization Calcium- and Phosphate-Loaded Liposomes with Amelogenin-Inspired Peptide
Preparation of Patterned BiFeO3 Thin Films on the Functional Silicon Substrates Surface
Effects of Annealing Temperature on Morphology and Dielectric Property of BiFeO3 Films
Preparation of Mineralized Electrospun PCL/Gelatin Scaffolds via Double Diffusion System
Fabrication and Mechanical Properties of Chitosan-Montmorillonite Nano-Composite
Matching Ability of Dental Shaded Zirconia Ceramics and Veneering Porcelain
Influence of Low Temperature Aging on the Flexural Strength of Y-TZP Ceramics
Affection of Post-Core Materials on the Resultant Color of Lithium Disilicate Ceramic Restorations
Effect of Zirconia Surface Roughness on Shear Bond Strength to Resin Cements
Effects of Alveolar Bone Loss and Post-Core Design on Stress Distribution of Severely Damaged Canine
Relative Translucency of Dental Lithium Disilicate Ceramic Restorations
In?uence of Thickness on Residual Stress Pro?le in Veneering Ceramic Layered: Measurement by Hole-Drilling
Masking Ability of IPS e.max ALL-Ceramics System of HO Series
The Influence of Background Color to 3 All-Ceramic System Core Materials
The Transmittance Test of 3 All-Ceramic System Core Materials
Effects of the Mechanical Properties of Veneering Porcelain on Stress Distribution of Dental Zirconia Layered Structure: A Finite Element Model Study
Preparation of Pigmented Glass for Infiltration and Investigation of its Physical and Mechanical Properties
Colorimetric Comparison of Two Kinds of VITA Shade Guides
Corrosion Behavior of Mesoporous Hydroxyapatite Coated AZ31 Magnesium Alloys
Improving Bioactivity of Porous ?-TCP Ceramics by Forming Bone-Like Apatite Layer on the Surfaces of Pore Walls
Preparation, Characterization and In Vitro Release Kinetics of Vancomycin Carried ?-TCP/Chitosan Composite Microspheres Used as Bone Tissue Engineering Scaffolds
Influence of Surface Composition of Silicon-Based Material on their Bioactivity