WGP Congress 2013
Published on 4. September 2013
418 pages
978-3-03826-172-8 (ISBN)
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The German Academic Society for Production Engineering is an association of leading German professors of production engineering. The "WGP Jahreskongress" has the aim to foster young researchers by giving the opportunity to publish their research results under their own name exclusively and discuss these results with each other during the meeting.
The 46 peer reviewed papers are grouped as follows:
Chapter 1: Assembly;
Chapter 2: Cutting and Grinding;
Chapter 3: Forming;
Chapter 4: Machines;
Chapter 5: Organization.
The German Academic Society for Production Engineering is an association of leading German professors of production engineering. The "WGP Jahreskongress" has the aim to foster young researchers by giving the opportunity to publish their research results under their own name exclusively and discuss these results with each other during the meeting.
The 46 peer reviewed papers are grouped as follows:
Chapter 1: Assembly;
Chapter 2: Cutting and Grinding;
Chapter 3: Forming;
Chapter 4: Machines;
Chapter 5: Organization.
More details
Series
Language
English
Place of publication
Zurich-Durnten
Switzerland
Target group
Professional and scholarly
Illustrations
Illustrations
File size
103,53 MB
ISBN-13
978-3-03826-172-8 (9783038261728)
DOI
10.4028/b-J3cWyK
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Marion Merklein | Joerg Franke | Hinnerk Hagenah
WGP Congress 2013
Progress in Production Engineering. Selected, peer reviewed papers from the 2013 WGP Congress, July 23-24, 2013, Erlangen, Germany
Book
10/2013
Trans Tech Publications Ltd
€184.77
Shipment within 10-15 days
Marion Merklein | J?rg Franke | Hinnerk Hagenah
WGP Congress 2013
Software
10/2013
Trans Tech Publications Ltd
€165.49
Shipment within 10-15 days
Content
Preface, Committees and Acknowledgements
Chapter 1: Assembly
Handling and Fixation of Permanent Magnets
Design of Assembly Systems for Large-Scale Battery Cells
An Integrated Simulation Approach to the Development of Assembly System Components
Numerical Analysis of the Manufacturing Impact on Magnetic Stray Fields at Electromagnetic Actuators
Development of a Self-Learning, Automatic Parameterisation of an Aerodynamic Part Feeding System
Planning and Simulation of High-Voltage Energy Storage Assembly for Automotive Industry - from Scalable Product Concepts via Assembly Planning and Material Flow Simulation through to Web-Based Assembly Information
Chapter 2: Cutting and Grinding
Micromachining of CP-Titanium on a Desktop Machine - Study on Bottom Surface Quality in Micro End Milling
Influence of Solid Contaminants in Metal Working Fluids on the Grinding Process
A High Resolution Surface Model for the Simulation of Honing Processes
Waterjet Turning of Titanium Alloys
A New Method for the Preparation of Cutting Edges via Grinding
Hot Machining: Utilisation of the Forging Heat for Efficient Turning at Elevated Temperatures
Numerical Investigations on Cutting of Dual-Phase Sheet Steel with an Emphasis on Material Damage at the Cut Edge
Quantitative Microstructural Analysis of Nanocrystalline Surface Layer Induced by a Modified Cutting Process
Cutting of Nickel-Based Superalloys with Rotating Indexable Inserts
Polishing Process of Ceramic Tiles - Variation of Contact Pressure
Low Frequency Vibration Assisted Drilling of Aluminium Alloys
Analytical Modelling of Temperature Distribution Using Potential Theory by Reference to Broaching of Nickel-Based Alloys
Deburring of Cross Holes in Titanium Using Industrial Robots
Chapter 3: Forming
Investigations on Orbital Forming of Sheet Metals to Manufacture Tailored Blanks with a Defined Sheet Thickness Variation
Influence of Material Model Parameters on the Prediction of Bending Loads in Sheet Metal Forming Simulation
Process Window for Forming of Micro Preforms at Different Temperatures
Geometrical variations of tubes and their impact on freeform bending processes
Formability of an Anti-Fingerprint Coating Considering the Corrosion Behavior of the Stainless Steel Substrate
Investigation of the Beginning of Plastic Yielding and the Hardening Behaviour under Biaxial Tension
Continuum Damage Mechanics (CDM) Based Local Approach to the Sheet-Bulk Metal Formability Prediction
Electromagnetic Material Feeder for High Speed Rates
Thermal Influences on Deep Drawing Process of Ferritic and Metastable Austenitic Stainless Steels
Sheet-Bulk Metal Forming of Symmetric and Asymmetric Parts
Properties of Friction Stir Welded Blanks Made from DC04 Mild Steel and Aluminum AA6016
Coating of Deep Rolled and Hammer Peened Deep Drawing Tools
Chapter 4: Machines
Model-Based On-Line Compensation of Path Deviations for Milling Robots
Using Chatter Vibrations in Milling to Create Tribo-Functional Surfaces for Sheet-Bulk Metal Forming Tools
Integrated Diagnostic and Preload Control for Ball Screw Drives by Means of Self-Sensing Actuators
Approach to Forecast Energy Consumption of Machine Tools within the Design Phase
Potential and Challenges of Combined Roller and Plain Bearings for Servo Presses
Theory of Small Machine Tools: A Framework Approach to Machine Development
Chapter 5: Organisation
Technology Selection for Electric Drive Production with a Game Theoretic Approach
Competence-Based Communication Design in Factories
Linked Energy Systems for Production Sites of the Future
Gamification in Management Decisions: Judging Global Production Networks in a Cyber-Physical Way
Technology Maturity Assessment of Carbon Composite Components
VR Enhanced Scenario Technique Supporting the Early Phases of Factory Planning
Identification of Production Rhythms in Synchronised Assembly Lines by Recording and Evaluating Current Processing Times
Productivity Increase through Industrialization of Overhead in Cyber-Physical Production Systems
Order Penetration Point: Just a Stock within Production?
Chapter 1: Assembly
Handling and Fixation of Permanent Magnets
Design of Assembly Systems for Large-Scale Battery Cells
An Integrated Simulation Approach to the Development of Assembly System Components
Numerical Analysis of the Manufacturing Impact on Magnetic Stray Fields at Electromagnetic Actuators
Development of a Self-Learning, Automatic Parameterisation of an Aerodynamic Part Feeding System
Planning and Simulation of High-Voltage Energy Storage Assembly for Automotive Industry - from Scalable Product Concepts via Assembly Planning and Material Flow Simulation through to Web-Based Assembly Information
Chapter 2: Cutting and Grinding
Micromachining of CP-Titanium on a Desktop Machine - Study on Bottom Surface Quality in Micro End Milling
Influence of Solid Contaminants in Metal Working Fluids on the Grinding Process
A High Resolution Surface Model for the Simulation of Honing Processes
Waterjet Turning of Titanium Alloys
A New Method for the Preparation of Cutting Edges via Grinding
Hot Machining: Utilisation of the Forging Heat for Efficient Turning at Elevated Temperatures
Numerical Investigations on Cutting of Dual-Phase Sheet Steel with an Emphasis on Material Damage at the Cut Edge
Quantitative Microstructural Analysis of Nanocrystalline Surface Layer Induced by a Modified Cutting Process
Cutting of Nickel-Based Superalloys with Rotating Indexable Inserts
Polishing Process of Ceramic Tiles - Variation of Contact Pressure
Low Frequency Vibration Assisted Drilling of Aluminium Alloys
Analytical Modelling of Temperature Distribution Using Potential Theory by Reference to Broaching of Nickel-Based Alloys
Deburring of Cross Holes in Titanium Using Industrial Robots
Chapter 3: Forming
Investigations on Orbital Forming of Sheet Metals to Manufacture Tailored Blanks with a Defined Sheet Thickness Variation
Influence of Material Model Parameters on the Prediction of Bending Loads in Sheet Metal Forming Simulation
Process Window for Forming of Micro Preforms at Different Temperatures
Geometrical variations of tubes and their impact on freeform bending processes
Formability of an Anti-Fingerprint Coating Considering the Corrosion Behavior of the Stainless Steel Substrate
Investigation of the Beginning of Plastic Yielding and the Hardening Behaviour under Biaxial Tension
Continuum Damage Mechanics (CDM) Based Local Approach to the Sheet-Bulk Metal Formability Prediction
Electromagnetic Material Feeder for High Speed Rates
Thermal Influences on Deep Drawing Process of Ferritic and Metastable Austenitic Stainless Steels
Sheet-Bulk Metal Forming of Symmetric and Asymmetric Parts
Properties of Friction Stir Welded Blanks Made from DC04 Mild Steel and Aluminum AA6016
Coating of Deep Rolled and Hammer Peened Deep Drawing Tools
Chapter 4: Machines
Model-Based On-Line Compensation of Path Deviations for Milling Robots
Using Chatter Vibrations in Milling to Create Tribo-Functional Surfaces for Sheet-Bulk Metal Forming Tools
Integrated Diagnostic and Preload Control for Ball Screw Drives by Means of Self-Sensing Actuators
Approach to Forecast Energy Consumption of Machine Tools within the Design Phase
Potential and Challenges of Combined Roller and Plain Bearings for Servo Presses
Theory of Small Machine Tools: A Framework Approach to Machine Development
Chapter 5: Organisation
Technology Selection for Electric Drive Production with a Game Theoretic Approach
Competence-Based Communication Design in Factories
Linked Energy Systems for Production Sites of the Future
Gamification in Management Decisions: Judging Global Production Networks in a Cyber-Physical Way
Technology Maturity Assessment of Carbon Composite Components
VR Enhanced Scenario Technique Supporting the Early Phases of Factory Planning
Identification of Production Rhythms in Synchronised Assembly Lines by Recording and Evaluating Current Processing Times
Productivity Increase through Industrialization of Overhead in Cyber-Physical Production Systems
Order Penetration Point: Just a Stock within Production?
