Towards Innovation in Superplasticity II
Published on 23. February 1999
872 pages
978-3-0357-0540-9 (ISBN)
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The papers of this second conference summarize the progress made in three major target areas; (1) to identify new phenomena in superplasticity, (2) to extend superplasticity research into the atomistic level of grain boundary analysis and (3) to find ways of enhancing collaboration between scientists and industrial engineers.
More details
Other editions
Additional editions
T. Sakuma | T. Aizawa | K. Higashi
Towards Innovation in Superplasticity II
Book
02/1999
Trans Tech Publications Ltd
€276.00
Article exhausted; check different version
T. Sakuma | Tatsuhiko Aizawa | Kenji Higashi
Towards Innovation in Superplasticity II
Software
02/1999
Trans Tech Publications Ltd
€447.47
Shipment within 10-20 days
Persons
Content
Preface
Towards Innovation in Superplasticity, A Brief Review on the Project
An Examination of Flow Processes in High Strain Rate Superplasticity
Nature of Superplastic Deformation
Analysis of Tensile Superplasticity in Nanomaterials
Enhanced Superplasticity of Ultrafine-Grained Alloys Processed by Severe Plastic Deformation
Nano-Grain Formation in a Fully Ferritic SUS 316L Austenitic Stainless Steel Produced by HS-PM Process
Superplasticity of (?+?) Duplex Stainless Steel with Elongated Secondary Phase
Microstructural Evolution for Superplasticity Using Equal-Channel Angular Pressing
Superplastic Behavior of Magnesium Alloy Processed by ECAE
Low Temperature Superplasticity of Ultra-Fine Grained 5083 Aluminium Alloy Produced by Accumulative Roll-Bonding
Formation of Microcrystalline Structures and Superplastic Properties of Nickel Based Alloys
Superplastic Properties of Rapidly Solidified Mg-Al-Zn Alloys
Superplasticity of Ultrafine-Grained Aluminium Alloys Processed by Equal-Channel Angular Pressing
Optimization of Microstrucutre for Superplasticity Using Equal-Channel Angular Pressing
Effect of Cold Pre-Rolling on Superplasticity of Nonrecrystallized 7075 Aluminium Alloy
Microstructure and Superplastic Properties in an ECAE Al-4Mg-0.5Sc Alloy Processed at Elevated Temperatures
Grain Refining during Heavy Deformation in Fe-C Alloys with (?+?) Two-Phase Structure
Superplasticity of Sintered Titanium Alloy with Martensitic Structure
Microstructure Change during Superplastic Deformation in (?+?) Duplex Stainless Steel
Microstructure Control for Superplasticity of an Ultra-High Carbon Steel
Atom-Scale Characterization of Ordered Alloys with Atom-Probe Field-Ion Microscope
Superplastic Deformation Mechanisms of Monolithic Intermetallics
Microstructural Evolution during Superplastic Deformation in Large-Grained Iron Aluminides
High-Temperature Deformation in Ti-62.5at.%Al Single Crystals Containing Small Al2Ti-Type Precipitates
Recent Advances in Superplastic Intermetallics with Emphasis on Titanium and Iron Aluminides
Modelling Heterogeneous Microstructures, Inhomogeneous Deformation and Failure in Superplasticity
Superplasticity Assisted by Stress-Induced Phase Transformation in Ti-5.5Al-1Fe Alloy
Superplastic Deformation without Relative Grain Translation?
Low-Temperature Superplasticity of Submicrocrystalline Intermetallics
Superplasticity in Titanium Aluminides Containing Chromium
Now and Future in High-Strain-Rate Superplasticity
Theoretical Investigation of High Strain Rate Superplasticity
Recent Research and Development Activities on Superplasticity in Taiwan
Deformation and Microstructural Development in a 2124Al/SiCpMMC during High Strain Rate Superplasticity
Threshold Stress in High Strain Rate Superplasticity of Powder Metallurgy Aluminum Alloys and Composites
Temperature Dependence of Tensile Elongation in a Mechanically Milled, P/M Al-Mg-Cu Alloy
Effect of Deformation Temperature on High Strain Rate Superplastic Properties in PM 2024Al-Fe-Ni Alloys
Phenomenology and Application of Low Temperature and High Strain Rate Superplasticity in Aluminium Alloy 1420
Superplastic Deformation of Aluminum Systems at 500-650 degreesC with or without Presence of Liquid Phase
Role of Subgrain Formation in High Strain Rate Superplasticity of Al-Mg Alloy
High Strain Rate Superplasticity in Magnesium Matrix Composites Containing 15-20 vol. % AIN Particulate
High Strain Rate Superplasticity in 10vol.% SiC Particulate Reinforced AZ31 Magnesium Alloys
The Thickness of Liquid Phase during Superplastic Deformation in the Vicinity of Solidus Temperature for a 7475 Aluminum Alloy
Observation of High-Strain-Rate Superplasticity in ZK60 and SiCp/ZK60 Composite
Low Temperature Superplastic Behavior in ZK60 Magnesium Alloy
High Strain Superplastic Forming of a New Al-Mg Alloy
Superplasticity of Ceramic Particulate Reinforced Magnesium Alloy Composite Made by a Vortex Method
Superplasticity of a SiCp/Al-10wt% Ti Composite at High Strain Rates
High Strain Rate Superplasticity of a Powder Metallurgy Pure Aluminum 1N90
Microstructural Dynamics during High-Strain-Rate Superplastic Flow in PM 7475 Alloy
Rheological Behavior of Superplastic Nanocrystalline and Amorphous Materials
Superplasticity in Pd40Ni40P20 Metallic Glass
Low-Temperature Homogeneous Deformation in Amorphous Alloys Induced under Electropulsing
Superplastic Behavior and Microstructure in Amorphous La55Al25Ni20 Alloy
Ni Tracer Diffusion in Bulk Metallic Glass Zr55Al10Cu25
Superplastic Forming of Zr65Al10Ni10Cu15 Metallic Glass
Superplasticity in La55Al20Ni25 Metallic Glass
The Role of Interfaces in the High Temperature Deformation and Failure of Polycrystalline Alumina
Stress Relaxation and Brittle-Ductile Transition in Superplastic Ceramics
Invesigation of Superplasticity in 3Y-TZP by Stress Relaxation
Mechanics of Superplastic Deformations at Atomic Scale
Grain Boundary Engineering for Superplasticity
Cavity Damage Accumulation in Alumina Doped with Zirconia or Magnesia
An Amorphous Ceramic Fiber with Large Viscous Flow Deformation at 1193 K
Superplastic Deformation of Cubic Zirconia Ceramics with Intergranular Phases
High Strain Rate Superplasticity in Ceramics
Alumina Segregation at Grain Boundaries in Superplastic Y-TZP
Liquid Phase Sintering of Y-TZP with CuO and Y2Cu2O5 Dopants
Effect of Divalent Elements on the Grain Growth of TZP
Improvement of Mechanical Properties after Superplastic Deformation of Silicon Nitride
Superplastic Characteristics of TZP Containing Various Amounts of SiO2
Superplastic Tensile Ductility in a Zirconia-Dispersed Alumina Produced by Colloidal Processing
High Temperature Compressive Deformation Behavior of Superplastic B, C-SiC
High Temperature Deformation of Precursor Derived Si-C-N Ceramics
Tensile Ductility of Liquid-Phase Sintered ?-Silicon Carbide at Elevated Temperature
High Temperature Deformation of Mullite-Zirconia Ceramics Consolidated from Rapidly Solidified Powder
Effect of Boron and Carbon Addition on High Temperature Deformation Behavior of ?-Silicon Carbide
TEM In-Situ Observation of SiO2 Doped TZP at High Temperatures
Superplasticity in Zirconia and Yttria Stabilized Zirconia Mixed Powders
Superplasticity in Multi-Phase Alumina-Based Composites
Superplastictiy in GeO2-Doped TZP
The Influence of the Threshold Stress in the Superplastic Flow of YSZP
Direct Atomistic Observation of Grain Boundary Sliding I. Gold
Direct Atomistic Observation of Grain Boundary Sliding II. Silicon Including Boundary Glass Phase
Boundary Structure of Y-ZrO2 Grains as Derived from High-Resolution Electron Microscopy
Grain Boundary Geometry of Superplastic Silicon Carbide Ceramic
Grain Boundary Character Distribution Control of Al-Mg Alloys by Hot Extrusion
Effect of Magnetic Field on Sintering of Iron Powder Compact
Effect of Grain Boundary Microstructure on Superplastic Deformation of Al-Li-Cu-Mg-Zr Alloy
Atomic Structure and Electron Structure of Fine Grained Diamond Boundaries
Grain Boundary Energy and Atomic Structure in Alumina Bicrystals
Initiation and Early Stages of Cavity Growth during Superplastic and Hot Deformation
Modelling of Superplastic Forming Using the Finite Element Method
Superplastic Forging Analysis by the Multi-Level Modeling
Multiaxial Experiments and Constitutive Modeling of Superplasticity
Microstructure Evolution in 5083 Al-Mg Alloy Exhibiting Low Temperature Superplasticity at 250 degreesC
The Role of Liquid Phase in Cavitation and Fracture in High-Strain-Rate Superplastic Si3N4p/Al Alloy Composite
Mechanism of Internal Stress Superplasticity Based on Thermally-Activated Kinetics
Finite Element Method Simulation of Grain Boundary Sliding: Its Purposes, Models and Applications in Fine-Grain Superplasticity
Crack-Like Cavitaton in a 0.3 wt% SiO2-Doped Tetragonal Zirconia
Anisotropic Feature of Fracture Toughness in Superplastically Deformed 3Y-TZP
Effect of Deformation Schedule on Cavitation in Superplastic 7475 Al Alloy
A Comparative Study of Cavitation Characteristics in Si3N4w/Al-Mg-Si Composite
Effect of Grain Boundary Microstructures of Brittle Fracture in Polycrystalline Molybdenum
Simple Evaluation of Superplastic Characteristic by Tensile Test Using R-Type Specimen
Cavitation in Coarse-Grained Al-4.5Mg Alloys Exhibiting Superplastic-Like Behavior
Positron Annihilation Study of the Cavitation in 5083 Superplastic Aluminum Alloy
A Technique to Study the Granular Flow during Superplastic Deformation
Forming of Ceramics at Elevated Temperatures
Superplasticity of YTZP: Application to the Joining of Ceramics
An Analytical Model of the Superplastic Bulge Forming of Sheet Metal
Different Friction Coefficients at Different Positions of Superplastically Formed Parts
On Superplastic Forming of Pure Titanium for Constructing Dental Implants
Superplastic Forming of Corrosion Resistant CuZnSn Alloys
Influence of Preforming on the Final Thickness Distribution of the Superplastically Deformed Domes
Mathematical Modeling of Superplastic Forming of a Long Rectangular Box Section
Fabrication of High-Performance Aluminum Components Using High Strain Rate Superplasticity
The Numerical Analysis on Superplastic Forming under Plane Strain for 7475 Al-Alloy
Superplastic Aluminum Forming - Expanding Its Techno-Economic Niche
Development of Superplastic-Aluminum-Alloy Piston Formed with Controlled Forging Technology
Superplastic Forming Manufacturing Technology Moves Towards the Twenty-First Century
Influence of Lubrication on Aluminum Superplastic Forming
Products Development of Superplastic 5083 Alloy 'ALNOVI-1'
New Type Aluminum Alloys with Higher Strength
Superplastic Forming of Aerospace Metallic Materials
High-Strain-Rate Superplasticity of Al-Si Alloy Produced by Powder Metallurgical Processing
Towards Innovation in Superplasticity, A Brief Review on the Project
An Examination of Flow Processes in High Strain Rate Superplasticity
Nature of Superplastic Deformation
Analysis of Tensile Superplasticity in Nanomaterials
Enhanced Superplasticity of Ultrafine-Grained Alloys Processed by Severe Plastic Deformation
Nano-Grain Formation in a Fully Ferritic SUS 316L Austenitic Stainless Steel Produced by HS-PM Process
Superplasticity of (?+?) Duplex Stainless Steel with Elongated Secondary Phase
Microstructural Evolution for Superplasticity Using Equal-Channel Angular Pressing
Superplastic Behavior of Magnesium Alloy Processed by ECAE
Low Temperature Superplasticity of Ultra-Fine Grained 5083 Aluminium Alloy Produced by Accumulative Roll-Bonding
Formation of Microcrystalline Structures and Superplastic Properties of Nickel Based Alloys
Superplastic Properties of Rapidly Solidified Mg-Al-Zn Alloys
Superplasticity of Ultrafine-Grained Aluminium Alloys Processed by Equal-Channel Angular Pressing
Optimization of Microstrucutre for Superplasticity Using Equal-Channel Angular Pressing
Effect of Cold Pre-Rolling on Superplasticity of Nonrecrystallized 7075 Aluminium Alloy
Microstructure and Superplastic Properties in an ECAE Al-4Mg-0.5Sc Alloy Processed at Elevated Temperatures
Grain Refining during Heavy Deformation in Fe-C Alloys with (?+?) Two-Phase Structure
Superplasticity of Sintered Titanium Alloy with Martensitic Structure
Microstructure Change during Superplastic Deformation in (?+?) Duplex Stainless Steel
Microstructure Control for Superplasticity of an Ultra-High Carbon Steel
Atom-Scale Characterization of Ordered Alloys with Atom-Probe Field-Ion Microscope
Superplastic Deformation Mechanisms of Monolithic Intermetallics
Microstructural Evolution during Superplastic Deformation in Large-Grained Iron Aluminides
High-Temperature Deformation in Ti-62.5at.%Al Single Crystals Containing Small Al2Ti-Type Precipitates
Recent Advances in Superplastic Intermetallics with Emphasis on Titanium and Iron Aluminides
Modelling Heterogeneous Microstructures, Inhomogeneous Deformation and Failure in Superplasticity
Superplasticity Assisted by Stress-Induced Phase Transformation in Ti-5.5Al-1Fe Alloy
Superplastic Deformation without Relative Grain Translation?
Low-Temperature Superplasticity of Submicrocrystalline Intermetallics
Superplasticity in Titanium Aluminides Containing Chromium
Now and Future in High-Strain-Rate Superplasticity
Theoretical Investigation of High Strain Rate Superplasticity
Recent Research and Development Activities on Superplasticity in Taiwan
Deformation and Microstructural Development in a 2124Al/SiCpMMC during High Strain Rate Superplasticity
Threshold Stress in High Strain Rate Superplasticity of Powder Metallurgy Aluminum Alloys and Composites
Temperature Dependence of Tensile Elongation in a Mechanically Milled, P/M Al-Mg-Cu Alloy
Effect of Deformation Temperature on High Strain Rate Superplastic Properties in PM 2024Al-Fe-Ni Alloys
Phenomenology and Application of Low Temperature and High Strain Rate Superplasticity in Aluminium Alloy 1420
Superplastic Deformation of Aluminum Systems at 500-650 degreesC with or without Presence of Liquid Phase
Role of Subgrain Formation in High Strain Rate Superplasticity of Al-Mg Alloy
High Strain Rate Superplasticity in Magnesium Matrix Composites Containing 15-20 vol. % AIN Particulate
High Strain Rate Superplasticity in 10vol.% SiC Particulate Reinforced AZ31 Magnesium Alloys
The Thickness of Liquid Phase during Superplastic Deformation in the Vicinity of Solidus Temperature for a 7475 Aluminum Alloy
Observation of High-Strain-Rate Superplasticity in ZK60 and SiCp/ZK60 Composite
Low Temperature Superplastic Behavior in ZK60 Magnesium Alloy
High Strain Superplastic Forming of a New Al-Mg Alloy
Superplasticity of Ceramic Particulate Reinforced Magnesium Alloy Composite Made by a Vortex Method
Superplasticity of a SiCp/Al-10wt% Ti Composite at High Strain Rates
High Strain Rate Superplasticity of a Powder Metallurgy Pure Aluminum 1N90
Microstructural Dynamics during High-Strain-Rate Superplastic Flow in PM 7475 Alloy
Rheological Behavior of Superplastic Nanocrystalline and Amorphous Materials
Superplasticity in Pd40Ni40P20 Metallic Glass
Low-Temperature Homogeneous Deformation in Amorphous Alloys Induced under Electropulsing
Superplastic Behavior and Microstructure in Amorphous La55Al25Ni20 Alloy
Ni Tracer Diffusion in Bulk Metallic Glass Zr55Al10Cu25
Superplastic Forming of Zr65Al10Ni10Cu15 Metallic Glass
Superplasticity in La55Al20Ni25 Metallic Glass
The Role of Interfaces in the High Temperature Deformation and Failure of Polycrystalline Alumina
Stress Relaxation and Brittle-Ductile Transition in Superplastic Ceramics
Invesigation of Superplasticity in 3Y-TZP by Stress Relaxation
Mechanics of Superplastic Deformations at Atomic Scale
Grain Boundary Engineering for Superplasticity
Cavity Damage Accumulation in Alumina Doped with Zirconia or Magnesia
An Amorphous Ceramic Fiber with Large Viscous Flow Deformation at 1193 K
Superplastic Deformation of Cubic Zirconia Ceramics with Intergranular Phases
High Strain Rate Superplasticity in Ceramics
Alumina Segregation at Grain Boundaries in Superplastic Y-TZP
Liquid Phase Sintering of Y-TZP with CuO and Y2Cu2O5 Dopants
Effect of Divalent Elements on the Grain Growth of TZP
Improvement of Mechanical Properties after Superplastic Deformation of Silicon Nitride
Superplastic Characteristics of TZP Containing Various Amounts of SiO2
Superplastic Tensile Ductility in a Zirconia-Dispersed Alumina Produced by Colloidal Processing
High Temperature Compressive Deformation Behavior of Superplastic B, C-SiC
High Temperature Deformation of Precursor Derived Si-C-N Ceramics
Tensile Ductility of Liquid-Phase Sintered ?-Silicon Carbide at Elevated Temperature
High Temperature Deformation of Mullite-Zirconia Ceramics Consolidated from Rapidly Solidified Powder
Effect of Boron and Carbon Addition on High Temperature Deformation Behavior of ?-Silicon Carbide
TEM In-Situ Observation of SiO2 Doped TZP at High Temperatures
Superplasticity in Zirconia and Yttria Stabilized Zirconia Mixed Powders
Superplasticity in Multi-Phase Alumina-Based Composites
Superplastictiy in GeO2-Doped TZP
The Influence of the Threshold Stress in the Superplastic Flow of YSZP
Direct Atomistic Observation of Grain Boundary Sliding I. Gold
Direct Atomistic Observation of Grain Boundary Sliding II. Silicon Including Boundary Glass Phase
Boundary Structure of Y-ZrO2 Grains as Derived from High-Resolution Electron Microscopy
Grain Boundary Geometry of Superplastic Silicon Carbide Ceramic
Grain Boundary Character Distribution Control of Al-Mg Alloys by Hot Extrusion
Effect of Magnetic Field on Sintering of Iron Powder Compact
Effect of Grain Boundary Microstructure on Superplastic Deformation of Al-Li-Cu-Mg-Zr Alloy
Atomic Structure and Electron Structure of Fine Grained Diamond Boundaries
Grain Boundary Energy and Atomic Structure in Alumina Bicrystals
Initiation and Early Stages of Cavity Growth during Superplastic and Hot Deformation
Modelling of Superplastic Forming Using the Finite Element Method
Superplastic Forging Analysis by the Multi-Level Modeling
Multiaxial Experiments and Constitutive Modeling of Superplasticity
Microstructure Evolution in 5083 Al-Mg Alloy Exhibiting Low Temperature Superplasticity at 250 degreesC
The Role of Liquid Phase in Cavitation and Fracture in High-Strain-Rate Superplastic Si3N4p/Al Alloy Composite
Mechanism of Internal Stress Superplasticity Based on Thermally-Activated Kinetics
Finite Element Method Simulation of Grain Boundary Sliding: Its Purposes, Models and Applications in Fine-Grain Superplasticity
Crack-Like Cavitaton in a 0.3 wt% SiO2-Doped Tetragonal Zirconia
Anisotropic Feature of Fracture Toughness in Superplastically Deformed 3Y-TZP
Effect of Deformation Schedule on Cavitation in Superplastic 7475 Al Alloy
A Comparative Study of Cavitation Characteristics in Si3N4w/Al-Mg-Si Composite
Effect of Grain Boundary Microstructures of Brittle Fracture in Polycrystalline Molybdenum
Simple Evaluation of Superplastic Characteristic by Tensile Test Using R-Type Specimen
Cavitation in Coarse-Grained Al-4.5Mg Alloys Exhibiting Superplastic-Like Behavior
Positron Annihilation Study of the Cavitation in 5083 Superplastic Aluminum Alloy
A Technique to Study the Granular Flow during Superplastic Deformation
Forming of Ceramics at Elevated Temperatures
Superplasticity of YTZP: Application to the Joining of Ceramics
An Analytical Model of the Superplastic Bulge Forming of Sheet Metal
Different Friction Coefficients at Different Positions of Superplastically Formed Parts
On Superplastic Forming of Pure Titanium for Constructing Dental Implants
Superplastic Forming of Corrosion Resistant CuZnSn Alloys
Influence of Preforming on the Final Thickness Distribution of the Superplastically Deformed Domes
Mathematical Modeling of Superplastic Forming of a Long Rectangular Box Section
Fabrication of High-Performance Aluminum Components Using High Strain Rate Superplasticity
The Numerical Analysis on Superplastic Forming under Plane Strain for 7475 Al-Alloy
Superplastic Aluminum Forming - Expanding Its Techno-Economic Niche
Development of Superplastic-Aluminum-Alloy Piston Formed with Controlled Forging Technology
Superplastic Forming Manufacturing Technology Moves Towards the Twenty-First Century
Influence of Lubrication on Aluminum Superplastic Forming
Products Development of Superplastic 5083 Alloy 'ALNOVI-1'
New Type Aluminum Alloys with Higher Strength
Superplastic Forming of Aerospace Metallic Materials
High-Strain-Rate Superplasticity of Al-Si Alloy Produced by Powder Metallurgical Processing
