International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications - THERMEC 2023

Preface
Chapter 1: Metallurgy of Steel
The Application of Physical Simulation in Hot and Cold Rolling of Steels
Development and Application of a Thermal Microstructure Model of Laminar Cooling of an API X70 Microalloyed Steel
Characterization and Separation of Damage Mechanisms of Extruded Case-Hardening Steel AISI 5115 under Cyclic Axial-Torsional Loading
Effect of Mo and Mo+Nb Additions on the Phase Transformation and Microstructure of a Developed Low-Carbon CrNiMnB Ultrahigh-Strength Steels with a Preceding Hot Deformation
Effect of Rapid Induction Tempering on the Mechanical Properties and Microstructure of Ultra-High Strength Steel
Effect of Nitrogen Impurity on the Tensile Ductility and Impact Toughness of Al-Bearing DQP Steels
Microstructural Characteristics and Mechanical Properties of Nanostructured Bainite Processed through High and Low Temperature Ausforming and Isothermal Holding near Ms in a Medium Carbon Steel
Assessment of Mechanical Properties and Microstructure of EUROFER97 Steel after Thermo-Mechanical Treatments
Impact of Ultra-Flash Tempering Treatment on the Microstructure and Mechanical Properties of High-Strength Carbon Steel
Phenomenon-Based Model for Virtual Hot Strip Rolling
Hot Stamping of Heavy-Gaged - Full Development and the Effect of Press Hardening Process on the Microstructure and Mechanical Properties of 22MnB5 + NbMo Alloyed
Grain Refinement in 441 Ferritic Stainless Steel: High Versus Low Ti/Al Ratio after Casting and Hot Rolling
Back-Annealing of Hot Dip Galvanised Strip Steel Microalloyed with Vanadium
Comparative Study of Quench and Partition Processes in High Si and High Al Steels
Thermomechanical Processing of V-N Structural Plate Steels in Low Temperature Austenite
Influence of Hot Rolling Practice and Furnace Residence Time on the Strength and Toughness of Normalised Nb-Ti-V Structural Steel Plate
Medium Carbon Q&P Steel with High Product of Strength and Elongation
Delamination Fracture in a Medium-Carbon Low-Alloy Steel Subjected to Tempforming
Effects of Pre-Strain and Tempering on Mechanical Properties in High-Strength Martensitic Steels
Effect of Pressure on High-Temperature Oxidation of Ferritic Stainless Steels
Tribological Behaviour of Low Temperature Plasma Assisted Carburized 316 L Steel Produced by L-PBF Technique
Recent Development of Hot-Rolled AHSS for Lightweight Chassis
Effect of Thermomechanical Rolling on Mechanical Properties of TRIP-Aided Steel Sheet
Prediction of TTR Diagrams via Physically Based Creep Simulations of Martensitic 9-12% Cr-Steels
Influence of the Holding Thickness and Process in the Microstructure and Mechanical Properties of a Microalloyed 380 MPa Structural Steel
Application of CALPHAD for the Prediction of Matrix Phase Transformations in Steel
Towards High Strength-Ductility Balance Using Double Annealing Cycles
Quench and Bainite (Q&B) Thermal Cycle as an Alternative to Standard Quench and Partitioning (Q&P) Annealing to Produce AHSS
Importance of through Hardening of Low-Alloy High Performance Martensitic Steels for Large Section Applications
Effects of Substrate Microstructure and Chemical Composition on Liquid Metal Embrittlement in Galvanized 3rd Generation AHSS
Double Soaking of Medium Manganese Steels
On High Performance Steels for Fasteners
Design and Properties of Hot Rolled Tough Carbide Free Bainitic Steels
Low Temperature Hot Press Forming of a Zinc Coated Third Generation Advanced High Strength Steel
Chapter 2: Structural Alloys
Mechanical Properties and Microstructure Evolution of an AA5083 via Introducing 0.33%Sc and Cryorolling
Effect of Core Hole Diameter on Tensile and Fatigue Properties of the Helically Formed Internal Thread in AlSi10MnMg Cast Alloys
Study on the Deformation Mechanism of a Nonequiatomic AlCrMnFeNi High-Entropy Alloy at Cold and Warm Temperatures
Unusual Precipitation at Grain Boundaries in Non-Equiatomic CoCrFeMnNi High Entropy Alloys
Manufacturing Method and Thermal Properties of Open-Cell Type Aluminum Foam by Replication Casting Process
Ultrafast Laser Fabrication of Microchannels on Aluminium Alloy Substrate
Effect of Cu on the Precipitation of ?-Al(Mn,Cr)Si Dispersoids in an Al-Mg-Si-Mn-Cr Alloy
Effect of Heating Rate on the Annealing Behavior of Aluminium Alloys
Effect of Distributions of Low Angle Grain Boundary and Dislocation Density on Strength of Al-3mass%Mg by SPD
Constitutive Model and Impact Induced Fragmentation of W-Zr Alloy
Microstructure Observation of Al-Zn-Mg Alloy with High Mg Content
Eta Phase Precipitation at Equilibrium and in Strain Free ATI 718Plus
Factor for Improvement of Plastic Workability in Magnesium Alloy Pipes through Processing by Torsion and Back-Torsion
Effect of Process Condition and Test Environment on Tensile Properties in Cold-Rolled Al-Cu-Mg Alloys
Mass Production and Vast Application States of Bulk Metallic Glasses
Microstructure Based Flow Stress Modelling of Superalloy 718
Crystal-Defect-Associated Transformation Strain Paths of Electric Current Pulse (ECP) Induced ? to ? Transformation in Cu-40?Zn
Developments of Cost Affordable Titanium Alloys in Japan
Breaks in Hall-Petch Relationship in Magnesium
Micro-Alloying Effect on the Inter-Critical Grain Coarsened Heat Affected Zone of a S355 Steel Welded Joint
Chapter 3: Composite Materials
Hybrid Carbon Fiber Reinforced Laminates with Interlaminar Nanofibers
Additive Layer Manufacturing of Carbon Fiber/PEKK Composites for Aeronautic Application
Graphite- and Graphene-Based Polymer Nanocomposites for Flexible Sensors and Actuators in Health Care and Soft Robotics Applications
Preparation, Microstructure, and Mechanical Properties of Aluminum Matrix Composite by Accumulating Roll Bonding Method
Relation between Process Parameters and Pressure during Friction Stir Forming in the Development of a Superplastic Composite Steel Sheets
Influence of Green Plantain Peel Ash and Alumina Reinforcement on the Physio-Mechanical Properties of Aluminium Matrix Hybrid Composites
Chapter 4: Powder Metallurgy
A Unique Hall-Petch Relation of Harmonic Structure Designed Pure Ni
High Temperature Deformation Behavior and Microstructure Evolution of Harmonic Structure Composites with WC-Co and High Speed Steel
Misorientation of Grains in Fatigue of Harmonic Structured Steel Observed by Diffraction Contrast Tomography Using Ultrabright Synchrotron Radiation
High Temperature Deformation of Harmonic Structure Designed CrMnFeCoNi High Entropy Alloy
Microstructure Evolution and Unique Deformation Behavior of a CrMnFeCoNi Harmonic Structure High Entropy Alloy at Elevated Temperatures
Effect of Hot-Pressing Pressure on the Microstructure and Thermal Conductivity of Copper/Ti-Coated Diamond Composites
Chapter 5: Additive Manufacturing
Buckling Mechanism Simulation for Thin-Wall Components Made by Laser Powder Bed Fusion
316L-Si Austenitic Stainless Steel Elaborated by Additive Manufacturing Process: Porosity and Dislocation Density Estimation
Effect of Isothermal Annealing on Residual Stresses and Fatigue Properties of LPBF 316L Steel
Fatigue Life and Impact Toughness of PBF-LB Manufactured Ti6Al4V and the Effect of Heat Treatment
Overview: Additive/Subtractive Hybrid Manufacturing of Heat Resisting Materials
The Influence of the Deposition Speed during Friction Screw Extrusion Additive Manufacturing of AA6060
Production of a Ti6Al4V Automobile's Lower Control Arm with EBM
Design Strategies towards the Optimization of 3D Additive Manufactured Lattice Structures
Processability and Solidification Microstructure of Al-10Si-4.5Mg Alloy Fabricated by Laser Powder Bed Fusion
Process Parameter Prediction in Laser Powder Bed Fusion Using an Artificial Neural Network
Advantages of Hybrid Neural Network Architectures to Enhance Prediction of Tensile Properties in Laser Powder Bed Fusion
Low-Environmental Impact Surface Treatment on SLM-Produced AlSi10Mg Aluminium Alloy
Functionally Graded Steels Obtained via Electron Beam Powder Bed Fusion
Towards Laser Metal Deposition of Modified PH 13-8Mo Powder
Triply Periodic Minimal Surfaces Manufactured by Electron Beam Powder Bed Fusion: Approaches and Challenges
High Temperature Tensile Properties and Microstructure of Ni20Cr Alloy Fabricated by Laser Powder Bed Fusion
Effect of Relative Weight on Compression Behaviour of 3D Printed Porous Structure Made of Aluminium Alloy
Effective Strategies for Electron Beam Additive Manufacturing of Graded Metal Interfaces between Stainless Steel and Vanadium
Themomechanical Response of an Additively Manufactured Hybrid Alloy by Means of Powder Bed Fusion
Mechanical Behaviour of Maraging Steel Processed by Powder Bed Fusion via Laser Beam (PBF-LB) in Different Build Orientations
High-Throughput Simulations of Phase Precipitation in Additively Manufactured Al Alloy
Laser-Powder Bed Fusion Additive Manufacturing of NiCrBSi Self-Fluxing Nickel Alloy, Material Health - Process Relationship
High Volume 3D Printer and Developed of High-Volume Extruders for Gelatin and Liquids
Microstructural and Mechanical Characterization of Large Surfaces after Laser Cladding by Wavering of Nickel Coating on Cast-Iron Molds Used in Glass Industry
Laser-Based Directed Energy Deposition of Ceramic Nanoadditivated AA7075 Powder Alloys
Alloy Design for AM: A Ferritic Alloy for Applications in Corrosive Alkaline Environment
Chapter 6: Welding Technologies
Effect of Ferrite/Austenite Phase Transformation on 475 degreesC Embrittlement in Duplex Stainless Steel Weld
Effect of High-Temperature Tempering on Microstructure and Mechanical Strength of Laser-Welded Joints between Medium-Mn Stainless Steel and High-Strength Carbon Steel
Experience in the Fabrication of Tube Grade 7CrMoVTiB10-10 with Inconel 625 Weld Overlay for Use in Steam Superheaters Exposed to Highly Corrosive Environments
Microstructure and Mechanical Properties of A6061/GA980 Resistance Spot Weld
High Energy Density Welding of IN792 Ds Superalloy
Effect of Cold Rolling on Bonding Interface of C1020/A1050 Butt Joints by Friction Stir Welding
High-Speed Laser Beam Welding of Magnesium Alloy AZ31 for Enhancing the Mechanical Properties
Friction Stir Welding of Various Aluminium Alloys to Titanium
Solute Enrichment in the Fusion Zone during Resistance Spot Welding of a Third Generation Advanced High Strength Steel
Premium Rail Flash-Butt Welding Process Window Based on Phase Transformations
Resistance Spot Welding of QP Stainless Steels: Role of Heat Treatment and Microstructure on Joint Strength
Phase Transformations in Layered Composites Based on Zr, Nb, Ta or Ti Sheet Explosively Welded to Stainless Steel Plate
Evaluation on Joint Performances of Advanced Multi-Material Dissimilar Lap Joints

In Situ TEM Observation of the Ultrasonic Bonding Process
Evaluation of Simulated Heat Affected Zone of Molybdenum- and Niobium Alloyed Ultra-High-Strength Steels
Joining Aluminum Alloy and Steel by Friction Stir Forming from Steel Side
Parallel Computing of Thermo-Fluid Modeling Related to the FSW Process
Gleeble Simulation of HAZ in S690QL Steel: Microstructural and Mechanical Properties
Chapter 7: Protective Coatings and Surface Engineering
Effect of Zirconium Conversion Coating on Corrosion Resistance of Small-Defected Auto Steel Sheets
Optimization of Anodizing Condition for Mg-14mass%Li-3mass%Al Alloy
Numerical Modeling of In-Flight Molten Metal Droplet Dynamics and Particle Oxidation in Atmospheric Plasma Spraying
Microstructural Stability of a Metallic Thermal Barrier Coatings for Rocket Engine
Strategy to Generate Oxide-Free Molten Metal Droplets for Fully Dense Corrosion-Resistant Coatings by Atmospheric Plasma Spraying
Oxidation Behavior of Atmospheric Plasma Sprayed NiAl Coating at High Pressure Oxygen Atmosphere
Crystallographic Textures of Al and Al-Mg Alloy Formed by Shot-Peening
Effects of Shot Peening on Mechanical Properties and Microstructural Evolution of AMS 6265 Steel Surface Treated for Critical Aircraft Components
Investigation of Effects of Electroplating Conditions on TEMPO-Oxidized Cellulose Nanofiber Composited Nickel Electroplated Films
Effect of Special Plating Films on Galvanic Corrosion Behavior between Metal and CFRTP
Investigation of Deposition Conditions and Basic Properties of CNF Composite Ni Plated Film by Electroless Plating Method
Electrolytical Coating of Inhomogeneous Structures Distributed on Metallic Surfaces
Formation Mechanism of Al2O3/HfO2 Eutectic Coating on SiC Substrate Using Light Focusing Method
Using Electropulsing to Control the Surface Quality of Casts
Chapter 8: Materials for Radiation Protection and Nuclear Applications
Challenge to Performance Evaluation of Fusion Reactor Materials by Fission Neutron and Charged Particle Irradiation
Boron Nitride Filled Thermoplastics for Passive Shielding of Space Electronics
Recent Research on SiC/SiC Composites for PWR
Ten-Year Recycling of Vanadium Alloy in Fusion Reactors
Chapter 9: Functional Materials
Sr Substitution Effect on Ca Site for 32522-Type Ca3Al2O5-yFe2As2 Superconductor
Effect of CeO2 Doped Zirconium Titanate with Various Temperatures by Solid-State Reaction Method
Development of Functionally Graded Metal-Ceramic Systems by Directed Energy Deposition: A Review
Magnetic Semiconductors from Ferromagnetic Amorphous Alloys
Effects of Thermomechanical Treatments on Tensile Properties of Pure Titanium
Study of the Phase Transition from TbCu7 Structure to ThMn12 Structure in Newly Developed ThMn12 Type Magnets Using a Numerical Analysis Method for X-Ray Diffraction Patterns
Development of Soft Magnetics Fe-B-C-Si Amorphous Alloys with High Magnetization and Sufficient Amorphous-Forming Ability
Development of Giant Magnetostrictive Materials for an Active Noise Control System in an Ultracompact Electric Vehicle
Robust and Reconfigurable Waveguide Design in Valley-Topological Phononic Crystals
Chapter 10: Computational Approaches to Materials Properties Evaluation
Why Do Grains Remain Roughly Equiaxed during Steady State Discontinuous Dynamic Recrystallization?
Diffusion in Metallic Glass-Forming Systems: A Description of the Kink Behavior Observed in the Temperature Dependence
The Role of Grain Size in the Mechanical Properties of Metals
A New Approach for Sintering Simulation of Irregularly Shaped Powder Particles
On the Application of some Plasticity Laws
Defects-Driven Plasticity: Rationalization Based on Notch Strengthening and Continuous Damage Mechanics
A Modern Approach to the Complicated Line Integrals in Linear Elastic Dislocation Theory
Chapter 11: Materials and Technologies for Hydrogen Production
High-Strength PPS-Polymer Composites for Hydrogen High-Pressure Applications
Damage Accumulation and Recovery Involving Vacancy-Type Defects Enhanced by Hydrogen in Tempered Martensitic Steel Showing Quasi-Cleavage Fracture
Hydrogen Embrittlement in as-Quenched Martensitic Steels - Application of Incremental Step Loading Technique with Novel Tuning-Fork Test
Microstructural Engineering of Mn-Alloyed Austenitic Steel for Hydrogen Storage and Delivery
Chapter 12: Materials and Technologies for Electronics Industry
Effect of Plating Potential on Three-Dimensional Structural Plating Films and their Adhesion to Epoxy Resin
Fabrication of High-Temperature Solder by Zn Plating Films Containing Al Particles
Effect of Sb Addition on Microstructure and Shear Strength of Sn-3.0Ag-0.5Cu Solder Ball Joints
Ion Trajectory Control in Processing Plasmas for Nano-Fabrication
Optical-Emission Properties of GaN-Based Nanopillar Light-Emitting Diodes Prepared on Non-Polished and Non-Single-Crystalline Substrates
Effect of High Temperature and Humidity on Bond Strength of Al/Resin Adhesive Joints
Chapter 13: Materials for Biomedical Applications
Carbon Dots Release from Biodegradable Coatings Deposited by Aerosol-Assisted Open-Air Plasma
Plasma Immersion Ion Implantation of a Fe-Mn-C Based Steel for Biomedical Applications: Effect of Gases and Treatment Times on the Surface Properties
Neural Network Regressor for Designing Biomedical Low Elastic Modulus Ti-Zr-Nb-Mo Medium Entropy Alloys
Development and Characterisation of New Hydrogels for Medical Science Education
Effects of C Doping on the Structure and Functional Characteristics of Fe-Mn Alloys after Equal Channel Angular Pressing
Effect of Rotary Swaging on Mechanical and Corrosion Properties of Zn-1%Mg and Zn-1%Mg-0.1%Ca Alloys
Improvement of Work-Hardening Behavior of Co-Cr-W-Ni Alloy by Adding Mn/Fe for Balloon-Expandable Stents
Status and Challenges in Biomedical Applications of LDHs
Can Multifunctionality of Bioresorbable BMGs be Tuned by Controlling Crystallinity?
Magnesium-Based Biomedical Devices Degradation Control by Means of Multilayer Coatings
Effect of Heat Treatments on Microstructure and Mechanical Properties of Nitinol Prototype Stents Produced by Laser Powder Bed Fusion
New Powder Metallurgy Titanium Alloys with Built-In Antibacterial Capability
Binder Based Processing of Magnesium Alloy WE43 towards Biomedical Application Using Metal Injection Molding (MIM)
Microstructure, Mechanical, and In-Vitro Characterization of a Novel Biodegradable Zinc-Based Composite Fabricated at Room Temperature
Interactive Evaluation of Interfacial Damages on Loosening Behavior of Acetabular Cup Loosening Using AE and IR Method
Chapter 14: Measurement and Testing Methods and Devices
Actual Stress Analysis of Welded Part Using a Quantum Beam Hybrid Method
A Unified Representation for Fundamental Equations of Various X-Ray Stress Measurement Methods
Numerical Simulation of Jominy End Quench Test Using Coupled Heat Transfer and Phase Transformation Model
Mechanical Spectroscopy Investigation of Defective Structures in Metals

In Situ ALD-TEM System to Study Atomic Nucleation Phenomena - Enabled by Ultrathin Large Aspect Ratio Free-Standing Shell Structures
A Study on Inclusion Characterisation of Steel Using a Novel Inclusion Characterisation Tool
Design and Evaluation of an Automated System for the Preparation of Samples
Conceptual Design of a Fluid Handling System with Dosing and Mixing for PCR Applications
Dynamic Modulus Anomaly in Metallic Alloys Prepared by Additive Manufacturing
Conception of a Multi-Component Water System with Individually Adaptable Modules for Measuring Diverse Parameters and a Variability of the Purification Output Quality
Development of a Thermal Cycler for a Low-Cost Real-Time PCR Application
Assessment of Powder Solidification Structures in Tool Steels Using State-of-the-Art Microstructural Characterization Techniques
Evaluation of Interfacial Thermal Resistance of Al-Si Alloy by Using Image-Based Simulation
Chapter 15: Operation Research and Industrial Engineering
Data Analysis of Production Data for Continuous Casting of Aluminum Rolling Ingots
Determination of the (New) Product Dimensional Window
Statistical Methods for Predicting of the Quality of Aluminum Ingots
Intelligence Press Brake for Aircraft Skin Bending
Data Analysis and Visualization of Mechanical Properties of Aluminium Coils, Focusing on Chemical Composition, Annealing Temperatures and Holding Time
From Material Requirements to the Rolling Schedule - Fast Material-Oriented Roll Pass Design for Long Products with the Open Source Framework PyRolL
ECCC History and Value of Work Done for the Introduction and Use of Newer Materials
Proper Material Tracking for a Continuous Aluminum Production Process
Sustainability and Life Cycle Analysis of 3D Printing Industries
High-Pressure Torsion: From Miniature Earthquake to the Origin of Life
The Effect of the Artificial Sand on the Gas Emission for Aluminum Casting