High Temperature Corrosion and Protection of Materials 6

<ul><li>Avant Propos, Preface</li><li>A Brief History of the 'Les Embiez HTC Symposia'</li><li>Kinetic Study of the Oxidation by Oxygen of a Zirconium Based Alloy: ZrNbO Differences between the Pre- and Post-Transition Stages</li><li>Internal Precipitation of Al₂O₃ and Cr₂O₃ in Austenitic Alloys </li><li>Recent Improvements in the Understanding of Alumina Film Formation and Durability</li><li>Internal Nitridation during Creep Loading of Polycrystalline Ni-Base Superalloys</li><li>Relation Between Oxidation Kinetics and Chromium Diffusion in Stainless Steels</li><li>Role of Minor Element Addition in the Formation of Thermally Grown Alumina Scales</li><li>Kinetic Investigations on Salt Melt Induced High-Temperature Corrosion of Pure Metals</li><li>Effects of Titanium on a Ferritic Steel Oxidation at 950 degreesC</li><li>Yttrium Implantation and Additional Element Effects on the Oxidation Behaviour of Reference Steels at 973 K</li><li>Presentation, Calibration and First Experiments Using a New Thermobalance for Experiments in Sulfur Vapor Atmospheres</li><li>X-Ray Diffraction to Study the Oxidation Mechanism of Chromium at Elevated Temperatures</li><li>Study of the Sulfur Segregation for a TBC System</li><li>Is KCl(g) Corrosive at Temperatures Above its Dew Point? Influence of KCl(g) on Initial Stages of the High Temperature Corrosion of 11% Cr Steel at 600 degreesC</li><li>The Effect of Silicon Addition on the High Temperature Oxidation of a Fe-Cr Alloy</li><li>Experimental Study of the Interactions between Oxidation and Structural Defects </li><li>Influence of Temperature and Composition of SO₂/O₂ Atmosphere on the Surface Morphology of Alumina Scales Formed on FeCrAl Steel</li><li>Modelling of the Kinetic Transition in Zirconium Based Alloys: Application to the Oxidation of Zircaloy-4 by Water Vapour </li><li>Computer Simulation of Morphology Evolution of Oxide Scales during Oxidation</li><li>Effect of Nanocrystallization on Hot Corrosion Behavior of K38G Alloy with Sulfate Deposit at 900 degreesC</li><li>First Principle Calculation of Oxidation of Metals</li><li>High Temperature Oxidation of Fe-3Si Alloy</li><li>A New Interpretation of the ''Breakaway'' Oxidation Behaviour Observed at High Temperature on 304 Stainless Steel</li><li>Nano-Oxidation of Cu(100) Investigated by In situ UHV-TEM</li><li>Environmental Protection of Metal Structures at High Temperature: State of the Art and Future Trends</li><li>Effects of Platinum on the Interdiffusion and Oxidation Behavior of Ni-Al-Based Alloys</li><li>Environmental and Thermal Protection of ?-TiAl Alloys </li><li>Investigation of Oxide Formation during Short-Term Oxidation of Model NiAl Alloys</li><li>Evidence for the Formation of Al-Rich Reservoir Phases Resulting from Interdiffusion between MCrAlY Coating and Ni-Based Substrate</li><li>Effect of Pt Additions on the Sulfur Segregation, Void Formation and Oxide Scale Growth of Cast Nickel Aluminides</li><li>Development and Oxidation of a Re_xO_y- Modified Chromizing Coating</li><li>Low Mass Bondcoat for Robust Thermal Barrier Coatings</li><li>High Temperature Oxidation Behaviour of Aluminide Coatings Obtained by Pack Cementation</li><li>Effects of Silica Nano-Particle Coatings on High-Temperature Oxidation of AISI 321</li><li>On the Understanding of TGO Growth and Spallation in Nickel Aluminides</li><li>Effect of an Enamel Coating on Hot Corrosion Behavior of the Multi-Arc Plated NiCrAlY Composite Coating</li><li>High Quality Aluminide and Thermal Barrier Coatings Deposition for New and Service Exposed Parts by CVD Techniques</li><li>High Temperature Al/Si Diffusion Coatings Deposited by Chemical Vapor Deposition in Fluidized Bed Reactors (CVD-FBR)</li><li>Coating Design Using Computational Codes for Steam Oxidation Conditions</li><li>Effect of Electrodeposited Thin Films Containing Yttrium on High Temperature Oxidation Behaviour of Ni Base Alloys</li><li>The Effect of Silicon on Cyclic Oxidation Behavior of Aluminide Coatings on Superalloy IN-738LC</li><li>Microstructural Transformation in Platinum Aluminide Coated on CMSX-4 Superalloy</li><li>High Temperature Oxidation of (Ti,Al)N and (Ti,Al,Y)N Coatings on a Steel Prepared by Arc Ion Plating (AIP)</li><li>How to Design a Nano-Multilayered PVD Nitrides Based Coating Regarding its Resistance Against Oxidation and Aqueous Corrosion ?</li><li>Failure Analysis of High-Temperature Oxidation for Plasma Sprayed Thermal Barrier Coating Systems with Different Coating Characteristics</li><li>Zirconium Modified Aluminide by a Vapour Pack Cementation Process for Thermal Barrier Applications: Formation Mechanisms and Properties</li><li>Measurement of Residual Stress in Thermally Grown Oxide Layers in Thermal Barrier Coating Systems - Development of Non-DestructiveTest Methods</li><li>Corrosion Performance of Unbalanced Magnetron-Sputter Coatings in Atmospheres Containing 1%H₂S or H₂S + 1%HCl at 600 degreesC</li><li>Novel Low Temperature Diffusion Coatings for Heat Exchanger Materials</li><li>On the Development and the Oxidation of Novel Ni-Cr and Ni-Al Nanocoatings by Composite Electrodeposition</li><li>Evolution of Oxide Scale Morphology on (Ni,Pd)Al Coating during High Temperature Oxidation in Air</li><li>Cyclic Oxidation of Chromia-Scale Forming Alloys: Lifetime Prediction and Accounting for the Effects of Major and Minor Alloying Additions</li><li>Effect of Microstructure on the High Temperature Oxidation and Pesting Behaviour of MoSi₂</li><li>Cyclic Oxidation Behaviour of Halogen Implanted Ti-46.5Al-4(Cr, Nb, Ta, B)</li><li>High Temperature Properties of a New Powder Metallurgical FeCrAl Alloy</li><li>The Oxidation Behaviour of the Commercial FeCrAlRE Alloys Aluchrom YHf and Kanthal AF Foils in Air at 800 degrees-950 degreesC</li><li>Optimisation of In-Service Performance of Boiler Steels by Modelling High Temperature Corrosion - EU FP5 OPTICORR Project</li><li>Numerical Model for Oxide Scale Growth with Explicit Treatment of Vacancy Fluxes</li><li>Effect of Combined Yttrium and Zirconium Additions on Protective Alumina Scale Formation on High Purity FeCrAl Alloys during Oxidation in the Temperature Range of 1200 to 1300 degreesC</li><li>High Temperature Corrosion of TiAl - 2-5At-%X (X=Ag,Cr,Nb) Alloys in SO₂ and H₂S-H₂ Atmospheres</li><li>The Quantitative Role of Surface Doped Fluorine for the Improvement of Oxidation Resistance of TiAl in Air</li><li>The Effect of Aluminium Ion Implantation on the Oxidation Behaviour of Fe-xCr-yAl Alloys</li><li>In Situ - Investigation of the Oxide Scale Formation and Recrystallization of a FeCrAl Foil</li><li>Importance of Beta Phase Formation for the Oxidation Resistance of TiAl Significantly Improved by Ion Implantation of Beta Formers</li><li>Comparing Different Methods to Determine the Intergranular Oxidation Damage on a Nickel Based Superalloy</li><li>Metal Dusting Performance of Nickel-Base Alloys</li><li>The Use of Plasma Sprayed Laser Remelted Corrosion Resistant Metallic Coatings to Inhibit Metal Dusting</li><li>The Role of Discontinuous Precipitation in Metal Dusting</li><li>Experimental Analysis and Computer Simulation of Inward Oxide Growth during High-Temperature Corrosion of Low-Alloy Boiler Steels</li><li>Influence of Aluminum Depletion Effects on the Calculation of the Oxidation Lifetimes of FeCrAl Alloys</li><li>Low Temperature Oxidation of Pure Iron: Growth Kinetics and Scale Morphologies</li><li>Predicting Equipment Lifetimes with High Temperature Corrosion Data</li><li>An Interfacial Thermodynamic Model for the Oxidation Kinetics of a Metal: Epitaxial Stress Effects</li><li>Luminescence-Based Characterization of Protective Oxides: from Failure Mechanisms to Non-Destructive Evaluation</li><li>Measuring Adhesion of Cr₂O₃ and Al₂O₃ Scales on Fe-Based Alloys</li><li>Direct Examinations of Oxide Scales upon Cooling: A New Way to Analyse Oxide Scale Spallation</li><li>Influence of Environment on Creep Properties of MC2 Single Crystal Superalloy at 1150 degreesC</li><li>Piezo-Spectroscopy Studies of Stress and Damage Evolution in the Thermally Grown Oxide in TBCs</li><li>Cyclic Oxidation Modeling and Life Prediction</li><li>Growth Strains and Stress Relaxation in Alumina Scales during High Temperature Oxidation</li><li>Study of the Thermal Oxidation of Fe-15 Cr by Combined Raman and Photoelectrochemical Imaging</li><li>Multi-Sample Thermobalance for Rapid Cyclic Oxidation under Controlled Atmosphere</li><li>A Thermo-Kinetic Study of Titanium Oxidation Assisted by a Nd-YAG Pulsed Laser</li><li>Oxidation Kinetics and Scale Spallation of Iron-Chromium Alloys with Different Titanium Contents</li><li>Deflection and Three Point Bending Tests in SEM: Mechanical Characteristics of Oxide Films</li><li>Modelling the Deformation and Fracture of an Al₂O₃ Scale Developed on Fe₃Al during Cooling</li><li>The Role that Interacting Failure Mechanisms Have on the Lifetime of APS-TBC under Oxidizing Conditions</li><li>Cyclic Oxidation Kinetics Modeling of NiAl Single Crystal</li><li>Effect of Cycle Frequency on High Temperature Oxidation Behavior of Alumina-Forming Coatings Used for Industrial Gas Turbine Blades</li><li>Oxide Growth Stresses in an Austenitic Stainless Steel Determined by Creep Extension</li><li>Volatility of Common Protective Oxides in High-Temperature Water Vapor: Current Understanding and Unanswered Questions</li><li>Oxidation of Stainless Steel in H₂O/O₂ Environments - Role of Chromium Evaporation</li><li>Interaction between Mechanical Loading in Creep and Reactivity of Zircaloy-4 at 450 degreesC</li><li>Effect of Alloying Additions in Ferritic 9-12%Cr Steels on the Temperature Dependence of the Steam Oxidation Resistance</li><li>The Oxidation Behavior of Fe-Al Alloys</li><li>Chemical Potential Distribution and Void Formation in Magnetite Scale Formed in Oxidation of Iron at 823K</li><li>The Use of Model Alloys to Develop Corrosion-Resistant Stainless Steels</li><li>The Effect of Water Vapour on the Oxidation of Stainless Steels Studied in Situ by X-Ray Diffraction </li><li>Isothermal Oxidation Behaviour of a Hot-Work Tool Steel</li><li>Oxygen and Water Vapour Oxidation of 15Cr Ferritic Stainless Steels with Different Silicon Contents</li><li>High-Temperature Oxidation Behaviour of a Hot Isostatically-Pressed Si₃N₄-HfB₂ Ceramic Composite</li><li>Oxidation and Corrosion Properties of the MoAl_xSi_2-x (C40)/Al₂O₃ Composite</li><li>Influence of Grain-Size on Ionic Conductivity of Pure and Dense ?-Al₂O₃ in the Temperature Range 400 - 1000 degreesC</li><li>An Evaluation of the Performance of Candidate Gas Turbine Abradeable Seal Materials Exposed to a High Temperature Combustion Atmosphere</li><li>Role of Alkali Hydroxides in the Fireside Corrosion of Heat Transfer Surfaces, a Practical Approach</li><li>Corrosion Experience in the Gasefier of the Elcogas IGCC Power Plant in Spain</li><li>Nucleation and Growth of Oxide Constituents on NiCoCrAlY Bond Coats during the Different Stages of EB-PVD TBC Deposition and Upon Thermal Loading</li><li>Development of a New Test Method of High Temperature Corrosion in Gas Turbines Based on Thermodynamic Modelling</li><li>Development of Burner Rig Corrosion Tests for Gas Turbine Alloys: Study of Protective Metallic Coatings and Inhibitors for Hot Salt Corrosion</li><li>Influence of Moisture on the Hot Corrosion of Metals in Nitrate and Sulfate Melts</li><li>Corrosion of Metallic Materials in Combustion Gas Condensates at 250 degreesC</li><li>Development of Hot Corrosion on Coated Single Crystal Superalloys</li><li>Innovative Coating for Aggressive Environments: Land-Based Gas Turbine Applications</li><li>Steam Oxidation of Slurry Aluminide Coatings on Ferritic Steels for Advanced Coal-Fired Steam Power Plants</li><li>A Pilot Plant Study of the Effect of Alkali Salts on Initial Stages of the High Temperature Corrosion of Alloy 304L</li><li>High Temperature Corrosion of Superheater Tubes in Waste Incinerators and Coal-Fired Plants</li><li>High Temperature Oxidation Behaviour of Boiler Steels under Simulated Combustion Gases</li><li>Laboratory Testing for Evaluation of Steels and Alloys Used in Superheater Area of Boilers for Biomass-Based Fuels</li><li>Modeling of Low-Temperature Oxidation of Steel Tubes in Biomass Combustion</li><li>Field Investigation of Steamside Oxidation of TP347H</li><li>Influence of KCl Deposit Morphology on Corrosion of Austenitic Alloys at 500 degreesC</li><li>Steam Oxidation Resistance of Selected Austenitic Steels</li><li>Erosion-Corrosion of Alloys in Power Plant Heat Exchangers at Elevated Temperatures</li><li>Steam Corrosion Resistance of New 12% Cr Ferritic Boiler Steels</li><li>High Temperature Interaction of Pure Cr with KCl</li><li>Fundamental Studies on Alkali Chloride Induced Corrosion during Combustion of Biomass</li><li>Oxidation-Sulfidation Behavior of Multiphase Mo-Si-B Alloys</li><li>Materials for Solid Oxide Fuel Cells: the Challenge of their Stability</li><li>High Temperature Corrosion of Steels in Liquid Pb-Bi Alloy</li><li>Interfacial Interactions between some La-Based Perovskite Thick Films and Ferritic Steel Substrate with Regard to the Operating Conditions of SOFC</li><li>Phase Transformation and Growth of Alumina on a Thin FeCrAl-RE Foil at Around 900 degreesC</li><li>State of the Sub-Surface Microstructure of Carbides Strengthened Cast Superalloys after High Temperature Oxidation - Use of Thermodynamic Modelling for a Better Understanding</li><li>Three Examples of High-Temperature Corrosion of Metals by Molten Glasses</li><li>A New General and Rapid Method for Investigating Hot Corrosion: Preliminary Tests on Electrodes for Molten Carbonate Fuel Cells</li><li>Approach of the Corrosion Behaviour of T91 Steel in Lead or Lead-Bismuth Liquid Bath</li><li>High Temperature Performance of Ferritic Stainless Steels Manufactured by Powder-Metallurgy</li><li>High Temperature Oxidation Behaviour of Base Material and Laser-Weld Specimens of a Thin FeCrAl-RE Foil at Around 900 degreesC</li><li>Corrosion of High Temperature Alloys in the Coolant Helium of a Gas Cooled Reactor</li><li>Influence of the Microstructural Texture of Cast Superalloys on their High-Temperature Oxidation Behaviour</li><li>Oxidation and Hot-Corrosion Behavior of Sputtered Ti-48Al-8Cr-2Ag Nanocrsytalline Coating</li></ul>