High Temperature Ceramic Matrix Composites III

<ul><li>PREFACE</li><li>Processing of Ceramic Matrix Composites</li><li>Development of SiC Fiber-Reinforced SiC Composites by Radiation-Cured Preceramic Polymer</li><li>New Type of Sintered SiC Fiber and Its Composite Material</li><li>Fabrication of Carbon Fiber/SiSiC Composites and Their Mechanical Properties</li><li>Dispersion of Chopped Short Fibers in Production of Fibers-Reinforced Glass-Ceramic Matrix Composites</li><li>Sol-Gel Derived Al₂O₃ Fiber Dispersed with Fine YAG Particles</li><li>Chemical and Mechanical Degradation of Hi-Nicalon and Hi-Nicalon-S Fibers under CVD/CVI BN Processing Conditions</li><li>Studies of the Spinnability of Polycarbosilane and Spinning Technology of Its Continuous Fibers</li><li>SiC-Based Fibers Synthesized from Hybrid Polymer of Polycarbosilane and Polyvinylsilane</li><li>Fabrication of Cf/SiC Ceramic Matrix Composites by Polymer Precursor Pyrolysis</li><li>The Development of a Combustion Chamber Liner Utilizing a Long-Fiber Reinforced Composite Material Made Using the Poly-Silazane Impregnation Method and the Chemical Vapor Deposition Method</li><li>Development of Lanthanumhexaluminate Fiber-Coating via Sol-Gel-Route Using Inorganic and Organic Precursors</li><li>Damage Tolerant Oxide Ceramics Using Pure Fiber and Matrix Laminates</li><li>High Performance Tyranno (Si-C-M-O) Fibers for Composites</li><li>Mechanical Properties an Microstructural Characteristics of Carbon Fiber Reinforced Silicon Carbide Matrix Composites by Chemical Vapor Infiltration</li><li>An Effective Process for Silicon Carbide Matrix Composites: Dual-Composition Solution Impregnation and Pyrolysis under Medium Pressure</li><li>Sol-Gel Processing of Silicon Based Matrixes for Carbon Fiber Reinforced Ceramic Composites</li><li>Development and Properties of an Oxide Fiber-Oxide Matrix Composite</li><li>Processing and Microstructure of Polymer-Derived Oxide Composite Materials</li><li>Fabrication and Mechanical Properties of Reaction Sintered Silicon Carbide Matrix Composite</li><li>SiC Fiber Reinforced Si₃N₄ Ceramics with Self-Diagnosis Function</li><li>Processing and Mechanical Properties of C-Fiber Reinforced SiCN-CMCs</li><li>Processing and Characterization of Carbon Fiber Reinforced Ceramic Nanocomposites</li><li>In-situ Synthesis and Oxidation Resistance of C-SiC-TiC-TiB₂ Composite</li><li>Fabrication and Characterization of 3D C/SiC Composites via Slurry and PCVI Joint Process</li><li>Processing and Characterisation of Silicon Carbide Fibre Reinforced MoSi₂-Based Composites</li><li>Process and Properties of Fiber-Reinforced Ceramic Matrix Composites with Function of Fracture Detection</li><li>Micromechanical Analysis of CMC Structural Members Based on Homogenization Method</li><li>Mechanical Properties of Coating Free SiTiCO Fiber-Reinforced SiC Matrix Composites</li><li>Mechanical Properties of Carbon Fiber-Reinforced hBN Matrix Composites at Elevated Temperature</li><li>Fracture Behavior of Unidirectional Si-Ti-C-O Fiber- Bonded Ceramic Composite Materials</li><li>Mechanical Properties of C/C Composites</li><li>Geometry Determination of Cruciform-Type Specimen and Biaxial Tensile Test of C/C Composites</li><li>Modelling of the Mechanical Behavior of a 2.5D C/C Composite under Tensile and Shear Loads at Room Temperature</li><li>Damage Modelling at the Mesoscopic Scale for 4D Carbon/Carbon Composites</li><li>Formation of a CVI-SiC Matrix Coating Reinforced by Carbon Fiber on a 2-D Woven C/C Substrate</li><li>Determination of the Interlaminar Tensile Strength of a C/C-Composite by the Diametral Compression Test at Temperatures up to 1800 degreesC</li><li>Shear Failure Behavior of Continuous Fiber Reinforced Ceramic Matrix Composites</li><li>Anomalous Strain Behaviour under Stress Controlled Loading of CFCCs</li><li>Toughened Silicon Carbide Based Composites by Microstructure Design and Processing</li><li>A Novel Technique of Using Interfacial Debonding to Measure Fiber-Bridging Stress in Ceramic Composites</li><li>Themomechanical Behavior and Microstructure of Tyrannohex Composites</li><li>Fracture Behavior of Cross-Ply Laminates Carbon-Carbon Composites</li><li>Creep Behavior and Modeling of SiC-Based PC Ceramic Matrix Composites with Glass Sealant in High Temperature Air</li><li>In situ Properties of 3-D Woven SiC/SiC-Based Composite</li><li>Probabilistic-Statistical Approach to Matrix Cracking in Ceramic Matrix Composites (CMCs)</li><li>Failure Mechanisms and the Macro-Response of Carbon Fiber Reinforced SiC Matrix Composites</li><li>Triaxially Braided C/SiC Composites: Research and Development by the Combined Process of CVI+PIP</li><li>Microstructure and Mechanical Properties of Hot-Pressed Silicon Carbide Fiber-Reinforced Silicon Carbide Composite</li><li>Tensile Matrix Cracking Behavior of Hi-Nicalon Fiber/Glass Matrix Cross-Ply Laminate Composites</li><li>Effect of the Open Porosity on the Flexural Strength of 2-D Woven Carbon Fiber Reinforced SiC/C Matrix Composites by Reaction-Bonding</li><li>The Pretreatment on Carbon Fibers for C/SiC Composites</li><li>Triaxially Braided C/SiC Composites: Structure and Properties</li><li>Triaxially Braided C/SiC Composites: A High Temperature, Lightweight, Nozzle Material</li><li>Three Dimensional Crack-Fiber Interaction Process in Fiber-Reinforced Ceramic Matrix Composite: Model Experiment</li><li>Mechanical Behavior of a Si-Ti-C-O Fiber-Bonded Ceramic Material</li><li>Static Fatigue of 2D SiC/SiC Composites with Multilayered (PyC-SiC)_n Interphases at High Temperatures in Air</li><li>On the Way to the Equivalence between Measured Parameters Using Non-Notched and Notched Woven Specimens of SiC/C/SiC Composites</li><li>Design of Room Temperature Tensile Test Specimen Made of Ceramic Matrix Composites</li><li>From the Yarn to the Bulk: A Meso-Macro Approach of the Mechanical Behaviour of 2D Ceramic Matrix Composites</li><li>High Temperature Behaviours of Two Nanocomposite Oxide Fibres</li><li>Thermal Stability of Glass-Sealed Si-Ti-C-O Fiber Reinforced SiC Composite</li><li>Structure and Materials of a Multi-Layer Coating for the Oxidation Protection of C/C Composites up to 1700 degreesC</li><li>Thermal Expansion Behaviour of High Melting Point Oxides</li><li>Characterization of Coating Cracks in Oxidation-Resistant SiC Coating on C/C Composites</li><li>High-Temperature Properties of Newly Developed Advanced SiC Fibers</li><li>Oxidation Behavior of Glass-Protected Tyranno-Hex Ceramic Matrix Composites</li><li>Effects of Matrix Cracking on the Creep of SiC-SiC Microcomposites</li><li>Tensile Creep Properties of Si-M-C-O (M=Ti or Zr) Fibers in Air Derived from Polymer Precursors</li><li>Some Recommendations for Long Term High Temperature Tests</li><li>Creep at the Mesoscopic and Microscopic Scale of 2.5D C_f-SiC</li><li>Macroscopic Creep of 2.5D C_f-SiC</li><li>Fatigue Behavior at High Temperature in Air of a 2D Woven SiC/SiBC with a Self Healing Matrix</li><li>Cyclic Fatigue Behaviour at Room Temperature and at High Temperature under Inert Atmosphere of a C/SiC Multilayer Composite</li><li>Improvement of Cyclic Fatigue Analysis by the Use of a Tensile Master Curve in Carbon/Carbon Composites</li><li>Subcritical Crack Growth Mechanisms and Failure Mechanism Maps for Ceramic Matrix Composites</li><li>Nanocreep of Carbon Fibers in 2.5D C_f-SiC</li><li>Tensile Behavior of Woven Ceramic Matrix Composites at Room and Elevated Temperature: An Experimental and Numerical Study</li><li>Thermal Cycling, Thermal Aging and Thermal Shock Behavior of Nicalon-Fiber Reinforced Glass Matrix Composites</li><li>Development of Interfaces in Oxide Matrix Composites</li><li>(PyC/SiC)_n and (BN/SiC)_n Nanoscale-Multilayered Interphases by Pressure Pulsed-CVI</li><li>Multilayerd Interphases in SiC/SiC Composites: Influence of the Interfacial Bond Strength on the Interfacial Characteristics</li><li>A Multilayer Ceramic Matrix for Oxidation Resistant Carbon Fibers-Reinforced CMCs</li><li>Methodology for Assessing the Interfacial Sliding Stress of a 2D Woven SiC-SiC Composite</li><li>Modeling of Interfacial Debonding in Unidirectionally Fiber-Reinforced Ceramics</li><li>Role of Roughness in Fibre/Matrix Interface Behaviour</li><li>Mullite/ZrO₂ Laminate Composites for High Temperature Applications</li><li>Fiber Reinforced Porous Alumina Substrate Consisting of Layer with Distinct Grain Sizes</li><li>Oxidation Behavior of Ceramic Fibers from the Si-C-N-O System and Sub-Systems</li><li>Polyfunctional Interface Coatings for High Temperature Resistant Ceramic Composite of SiC/SiC Type</li><li>Properties of Advanced Fibers for SiC/SiC Composite Applications in Fusion Energy Systems</li><li>Designing of Textile Preforms for Ceramic Matrix Composites</li><li>Design, Fabrication and Characterization of High Temperature Joints in Ceramic Composites</li><li>Design of High Preformance CMC Brake Discs</li><li>Tailoring of Interface Mechanical Properties in Al₂O₃ Fiber-Reinforced Al₂O₃ Matrix Composite</li><li>Morphology of Ceramic Matrix Composites</li><li>Joining of Si-Ti-C-O Fiber Reinforced Ceramic Composite and Fe-Cr-Ni Stainless Steel</li><li>Development of High Temperature Materials Including CMCs for Space Application</li><li>CMC for Hot Structures and Control Surfaces of Future Launchers</li><li>Low Cost Processing for C/C-SiC Composites by Means of Liquid Silicon Infiltration</li></ul>