Explosion, Shock Wave and Hypervelocity Phenomena in Materials
Published on 15. September 2004
500 pages
978-3-0357-0636-9 (ISBN)
Description
Recent years have witnessed an astonishing growth in research on materials science. Exotic new materials, innovative processing techniques and challenging computational methods make the pursuit of research in this field increasingly interesting and rewarding. Considering as it does, the significance of shock-wave phenomena in the rapidly changing materials science scene, this collection of papers will undoubtedly foster further advanced research into the allied research areas of explosive, shock-wave and hypervelocity phenomena in materials.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
More details
Other editions
Additional editions
S. Itoh | Kazuyuki Hokamoto | Masahiro Fujita
Explosion, Shock Wave and Hypervelocity Phenomena in Materials
Book
08/2004
1st Edition
Trans Tech Publications Ltd
€198.00
Article exhausted; check different version
S. Itoh | Kazuyuki Hokamoto | Masahiro Fujita
Explosion, Shock Wave and Hypervelocity Phenomena in Materials
Software
08/2004
Trans Tech Publications Ltd
€323.55
Shipment within 10-20 days
Persons
Content
Preface
A New Approach to the Reactive Burn Modeling of Heterogeneous Explosives
Dynamic Deformation of Regularly Cell-Structured Materials
Control of Crush Mode of Strengthening Members with Hat-Shaped Cross-Section in Axial Impact
Laser Induced Shock Defects in Copper Aluminum Alloys: Stacking Fault Energy Effects on the Slip-Twinning Transition
Dynamic Tensile Properties of Steel Sheets for Automobiles
Design of Impact Energy Characteristics of FRP Deep-Drawn Structures
High Velocity Impact of Steel Fragment on Thick Aluminum Target
Dynamic Behavior of Stress Waves in Blasting Process
Numerical Simulation of Impact Transonic Interfacial Fracture with the Crack Coalescence
Shock Induced Damage in Austenitic Stainless Steel
Computer Simulation of a Boeing 747 Passenger Jet Crashing into a Reinforced Concrete Wall
Studies on Aluminum Armour Plates Impacted by Deformable and Non-Deformable Projectiles
Prospects of Hot Explosive Pressing in Powder Metallurgy
Shock Compaction of Bulk Nanocomposite Magnetic Materials
Application of Explicit FE Techniques on the Explosive Compaction/Cladding of High-Temperature Superconductors
Studies on Explosive Compaction and Heat Treatment of 2124 Al-SiCp Composites
Shock-Wave Synthesis of Cubic Phase of Silicon Nitride Si3N4
Biological Effects of Shock Pressure on Microorganism
Shock Wave Induced Extremely High Oscillating Pressure Peaks
Scattering of Shock into Acoustic Waves in Shock-Vortex Interaction
Propulsive Impulse Generation Using CO2 TEA Lasers
ALE and Fluid Structure Interaction
Study on the State in a Steady Shock Front Propagating in Aluminum Materials
Molecular Dynamics Simulations of Shock-Induced Thermite Reaction
A Numerical Study of Sympathetic Detonation in Gap Test
Calculation of Blast Wave Strength in Different Propagating Directions from a Model Magazine Explosion
Field Investigation of Blast-Induced Damage of the Sedimentary Strata Rock Mass at PT Kaltim Prima Coal, Indonesia
Experimental Determination of the Detonation Front Curvature of Non-Ideal Explosive ANFO
Control of Variation of Time Delay from Ignition to Launch in ETC Gun
Chemical Reactions and Other Behaviors of High Energetic Materials under Static Ultrahigh Pressures
Study on the Effects of Addition of Boron Particles to RDX-Based PBX Regarding Prevention of Neumann Effect
Microstructural Study on Underwater Shock Consolidated Al/SiCp Composites
Effect on Explosive Cladding of TITAN 12/SS 304 L Plates under Multiple Conditions (Design Matrix)
Microstructure and Interface Studies of Al/SiCp Composites Produced by Dynamic Compaction
Wave Forming Mechanisms in Explosive Welding
The Effect of Wall Configuration on Deformation and Fragmentation for Explosively Expanded Cylinders of 304 Stainless Steel
Impact Seam Welding with Magnetic Pressure for Aluminum Sheets
A Technique of Local Processing by Small Amount of Explosive Powder
Ultrasonic Application to Scan the Layup of CFRP Composite Laminates
Characterization of Impact Damages and Responses in CFRP Composite Shells
Analytical Damage Evaluation for Particle or Short Fiber Reinforced Composites
3-D Laser Vibration Measurement and an Analysis of the Unsteady Flow-Field and Aerodynamic Sound of Turbo Fan Motor in a Vacuum Cleaner
Optical Observation of Extremely High Impulsive Pressure Generator Using Collision of High Velocity Metal Jets
Research on the JWL Parameters of Several Kinds of Explosives
Investigation on More Effective Shock Wave Usage for Warhead with HE (I)
Underwater Shock and Bubble Pulse Loading against Model Steel Cylinder
Power Law Relations between Stress and Strain-Rate Observed with Glassy Polymer under Uniaxial Strain Conditions
Effects of Experimental Parameters in the Explosive Welding Process Using Reflected Underwater Shock Wave
Study of the Effect of the Indentation Time and Load on Fracture Toughness and Crack Morphologies in WC-17Co Thermally Sprayed HVOF Coating
Characteristics of the New Explosive Welding Technique Using Underwater Shock Wave-Based on Numerical Analysis
The Possibility for Making Large-Sized Bulk Al-Based Composites through Dynamic Compaction Using Water as Pressure Transmitting Medium
Card Gap Test of Tri-n-Butyl Phosphate/Fuming Nitric Acid Mixture
Calculation of Detonation Parameters by EXPLO5 Computer Program
Development of a Shock Tube for Nondestructive Evaluation in Concrete Structures
Piercing Process of Very Thin Sheet Metal Using Explosive-Impulsive Pressure
Detonation Initiation of Cast H-6 High Explosive due to Shock Stimuli
A Method of Detecting Voids under Concrete Plates by Impact-Echo Test
Nondestructive Inspection of Concrete Structures by Using Sound Wave
Effect of the Strain Rate and Water Saturation for the Dynamic Tensile Strength of Rocks
Dynamic Tensile Experiment of Rock Using Underwater Shock Wave
Effect of Heat Treatment on Formation of Columnar Ferrite Structure in Explosively Welded Titanium/Hypoeutectoid Steel Joints
An Investigation on Overdriven Detonation Phenomenon in Concentric Double Cylindrical High Explosive
Evacuation Effect on Products during Underwater Shock Compaction
Numerical Simulation of Free Forming of Aluminum Alloy Using Underwater Shock Wave
Study on the Effect of Underwater Shock Wave and Gas Expansion in Explosive Forming
Reactive Flow Models for Three Types of Explosive and Two Propellants
Structure of a Shaped Jet Formed in an Oblique Collision of Flat Metal Plates
Calculation of Dynamic Strain Energy Release Rates due to Shock Wave Loading
Nonideal Blast Waves from Heterogeneous Explosives
The Effect of the Heat Treatment on Residual Stresses in HVOF Sprayed WC-Co Coating
Comparative Study of Al/SiCp Composites Manufactured by Direct and Underwater Explosive Compaction
Numerical Studies of Wave Generation Using Spiral Detonating Cord
Prediction of Unreacted Shock Hugoniot Compression Curve for Condensed Phase High Explosives
Some Studies on the Developments of Explosive Metal Processing Technology
Microstructure of Bonding Interface in Explosively-Welded Clads and Bonding Mechanism
Detonation Propagation in Packed Beds of Aluminum Saturated with Nitromethane
A New Approach to the Reactive Burn Modeling of Heterogeneous Explosives
Dynamic Deformation of Regularly Cell-Structured Materials
Control of Crush Mode of Strengthening Members with Hat-Shaped Cross-Section in Axial Impact
Laser Induced Shock Defects in Copper Aluminum Alloys: Stacking Fault Energy Effects on the Slip-Twinning Transition
Dynamic Tensile Properties of Steel Sheets for Automobiles
Design of Impact Energy Characteristics of FRP Deep-Drawn Structures
High Velocity Impact of Steel Fragment on Thick Aluminum Target
Dynamic Behavior of Stress Waves in Blasting Process
Numerical Simulation of Impact Transonic Interfacial Fracture with the Crack Coalescence
Shock Induced Damage in Austenitic Stainless Steel
Computer Simulation of a Boeing 747 Passenger Jet Crashing into a Reinforced Concrete Wall
Studies on Aluminum Armour Plates Impacted by Deformable and Non-Deformable Projectiles
Prospects of Hot Explosive Pressing in Powder Metallurgy
Shock Compaction of Bulk Nanocomposite Magnetic Materials
Application of Explicit FE Techniques on the Explosive Compaction/Cladding of High-Temperature Superconductors
Studies on Explosive Compaction and Heat Treatment of 2124 Al-SiCp Composites
Shock-Wave Synthesis of Cubic Phase of Silicon Nitride Si3N4
Biological Effects of Shock Pressure on Microorganism
Shock Wave Induced Extremely High Oscillating Pressure Peaks
Scattering of Shock into Acoustic Waves in Shock-Vortex Interaction
Propulsive Impulse Generation Using CO2 TEA Lasers
ALE and Fluid Structure Interaction
Study on the State in a Steady Shock Front Propagating in Aluminum Materials
Molecular Dynamics Simulations of Shock-Induced Thermite Reaction
A Numerical Study of Sympathetic Detonation in Gap Test
Calculation of Blast Wave Strength in Different Propagating Directions from a Model Magazine Explosion
Field Investigation of Blast-Induced Damage of the Sedimentary Strata Rock Mass at PT Kaltim Prima Coal, Indonesia
Experimental Determination of the Detonation Front Curvature of Non-Ideal Explosive ANFO
Control of Variation of Time Delay from Ignition to Launch in ETC Gun
Chemical Reactions and Other Behaviors of High Energetic Materials under Static Ultrahigh Pressures
Study on the Effects of Addition of Boron Particles to RDX-Based PBX Regarding Prevention of Neumann Effect
Microstructural Study on Underwater Shock Consolidated Al/SiCp Composites
Effect on Explosive Cladding of TITAN 12/SS 304 L Plates under Multiple Conditions (Design Matrix)
Microstructure and Interface Studies of Al/SiCp Composites Produced by Dynamic Compaction
Wave Forming Mechanisms in Explosive Welding
The Effect of Wall Configuration on Deformation and Fragmentation for Explosively Expanded Cylinders of 304 Stainless Steel
Impact Seam Welding with Magnetic Pressure for Aluminum Sheets
A Technique of Local Processing by Small Amount of Explosive Powder
Ultrasonic Application to Scan the Layup of CFRP Composite Laminates
Characterization of Impact Damages and Responses in CFRP Composite Shells
Analytical Damage Evaluation for Particle or Short Fiber Reinforced Composites
3-D Laser Vibration Measurement and an Analysis of the Unsteady Flow-Field and Aerodynamic Sound of Turbo Fan Motor in a Vacuum Cleaner
Optical Observation of Extremely High Impulsive Pressure Generator Using Collision of High Velocity Metal Jets
Research on the JWL Parameters of Several Kinds of Explosives
Investigation on More Effective Shock Wave Usage for Warhead with HE (I)
Underwater Shock and Bubble Pulse Loading against Model Steel Cylinder
Power Law Relations between Stress and Strain-Rate Observed with Glassy Polymer under Uniaxial Strain Conditions
Effects of Experimental Parameters in the Explosive Welding Process Using Reflected Underwater Shock Wave
Study of the Effect of the Indentation Time and Load on Fracture Toughness and Crack Morphologies in WC-17Co Thermally Sprayed HVOF Coating
Characteristics of the New Explosive Welding Technique Using Underwater Shock Wave-Based on Numerical Analysis
The Possibility for Making Large-Sized Bulk Al-Based Composites through Dynamic Compaction Using Water as Pressure Transmitting Medium
Card Gap Test of Tri-n-Butyl Phosphate/Fuming Nitric Acid Mixture
Calculation of Detonation Parameters by EXPLO5 Computer Program
Development of a Shock Tube for Nondestructive Evaluation in Concrete Structures
Piercing Process of Very Thin Sheet Metal Using Explosive-Impulsive Pressure
Detonation Initiation of Cast H-6 High Explosive due to Shock Stimuli
A Method of Detecting Voids under Concrete Plates by Impact-Echo Test
Nondestructive Inspection of Concrete Structures by Using Sound Wave
Effect of the Strain Rate and Water Saturation for the Dynamic Tensile Strength of Rocks
Dynamic Tensile Experiment of Rock Using Underwater Shock Wave
Effect of Heat Treatment on Formation of Columnar Ferrite Structure in Explosively Welded Titanium/Hypoeutectoid Steel Joints
An Investigation on Overdriven Detonation Phenomenon in Concentric Double Cylindrical High Explosive
Evacuation Effect on Products during Underwater Shock Compaction
Numerical Simulation of Free Forming of Aluminum Alloy Using Underwater Shock Wave
Study on the Effect of Underwater Shock Wave and Gas Expansion in Explosive Forming
Reactive Flow Models for Three Types of Explosive and Two Propellants
Structure of a Shaped Jet Formed in an Oblique Collision of Flat Metal Plates
Calculation of Dynamic Strain Energy Release Rates due to Shock Wave Loading
Nonideal Blast Waves from Heterogeneous Explosives
The Effect of the Heat Treatment on Residual Stresses in HVOF Sprayed WC-Co Coating
Comparative Study of Al/SiCp Composites Manufactured by Direct and Underwater Explosive Compaction
Numerical Studies of Wave Generation Using Spiral Detonating Cord
Prediction of Unreacted Shock Hugoniot Compression Curve for Condensed Phase High Explosives
Some Studies on the Developments of Explosive Metal Processing Technology
Microstructure of Bonding Interface in Explosively-Welded Clads and Bonding Mechanism
Detonation Propagation in Packed Beds of Aluminum Saturated with Nitromethane
