Advances in Engineering Plasticity

<ul><li>Preface</li><li>Statistical and Stochastic Description of Microvoid Evolution Observed in Dynamic Failure of Ductile Materials</li><li>Plastic Spin and Evolution of an Anisotropic Yield Condition</li><li>Finite Element Modeling of Deformation Behavior of Foaming Glass</li><li>Multiple Strata Cyclic Plasticity Model for Polycrystalline Metal</li><li>Study on Elasto-Viscoplastic Constitutive Equation of Volcanic Cohesive Soils</li><li>New Constitutive Models for Concrete: Plastic Hardening and Post-Failure Damage Models</li><li>Influences of Strain Rate and Temperature Variation on Material Intrinsic Length of Plasticity Strain Gradient Theory</li><li>A Homogenization Method for Analysis of Heterogeneous Cosserat Materials</li><li>Ductile Shear Fracture Mechanics</li><li>Rapid Propagation of a Mode I Crack in an Elastic-Viscoplastic Medium with Loading and Unloading Processes</li><li>Discing Around Perforations of Thin Plates and Tubes by Hemispherical-Nosed Missiles or Spheres</li><li>Feasibility and Reliability of Genuine Solid State Press Bonding of Aluminum Alloy 5083</li><li>Stress Field near Crack Close to Bonding Interface in Explosion Clad Plate</li><li>Variable-Amplitude Fatigue Strengths of Fiber-Metal Laminate: GLARE</li><li>The Failure of a Pretensioned Thin Al Strip under Irradiation of a Laser Beam</li><li>A Microcrack Based Continuous Damage Model for Brittle Geomaterials</li><li>Environment-Assisted Cracking of Thermostat Bimetal in 3.5% NaCl Solution</li><li>Modelling of Deformation Textures of Cold Rolled BCC Metals by the Rate Sensitivity Model</li><li>Plasticity in Mono-Crystalline Silicon under Complex Loading Conditions</li><li>Dislocation Structure and Deformation Mechanism for the Anomalous Yield Behavior in Fe₃Al Intermetallic Alloys</li><li>Modelling Screw Dislocation Mobility in the Bulk and in the Vicinity of Crack Tips using a Peierls-Nabarro Approach</li><li>Microscopic Observation of Plastic Deformation of Polycrystalline Iron</li><li>Single Grain Analysis of Strain Hardening and Internal Stresses in Cold Rolled IF-Ti Steel with a new High-Resolution Microdiffraction Technique</li><li>Self-consistent Estimates for Nonlinear Viscoelastic Polycrystals: a Simplified Resolution of the Affine Formulation Adapted to Monotonic Loading Paths</li><li>Microscale Spatial Distribution of Dislocations and Long Range Internal Stresses in Cold Worked bcc Fe</li><li>X-Ray Microbeam Diffraction Studies of Large Strain Dislocation Substructure Formation in OFHC Copper</li><li>Moving Plastic Discontinuities Effect on Overall Behaviour of Metals</li><li>High Temperature Plastic Deformation and Microstructure of Fe-9at%Si Polycrystals</li><li>Evolution of Grain-Scale Microstructure during Large Strain Simple Compression of Polycrystalline Aluminium</li><li>Practical Constitutive Models Covering Wide Ranges of Strain Rates, Strains and Temperature</li><li>Crash Analysis of Thin-Walled Structures with an Elasto-Plastic Explicit Finite Element Method</li><li>Ductility and Brittleness Simulation during Micro Void Evolution Process of Ductile Material Using Rigid Plastic FEM Based on Gurson Type Yield Function</li><li>Interpretation of High Strain-Rate Tested Results by Micrographic Evidence</li><li>Behaviour Characterisations of Sheet Metals, Metallic Honeycombs and Foams at High and Medium Strain Rates</li><li>The Effect of Strain Rate and Martensite Volume Fraction on Tensile Impact Behavior of Dual Phase Steels</li><li>Effect of Soft Material on Insulating Impact Pressure into Explosive</li><li>Ballistic Performance of Hot Isostatically Pressed (HIped) Ti-Based Targets</li><li>Dynamic Yield Stresses of Porous Materials Made of Bronze and Iron</li><li>Influence of Axial Pre-Load on Plastic Failure of Beams Subjected to Transverse Dynamic Load</li><li>Rate-Dependent Constitutive Law and Nonlocal Spallation Model for Concrete Subjected to Impact Loading</li><li>Characterization of Strain Rate-Dependent Shear Response of 63Sn/37Pb Solder under Uniaxial Torsion</li><li>Dynamic Response of an Elastic-Plastic Free-Free Beam Subjected to Impact at any Cross-Section along its Span</li><li>Saturated Impulse of Elastic-Plastic Beams under Concentrated Pulse Force</li><li>Effects of Damping on Dynamic Plastic Response of Circular Plate</li><li>Embedded Cell Model of Three-Dimensional Two-Phase Composites</li><li>Constitutive Behaviors of Discontinous Reinforced Composites</li><li>Plasticity Theory for Particulate Composite Materials with Imperfect Interfaces</li><li>Micromechanical Analysis for Off-Axis Nonlinear Behavior of Unidirectional Carbon Fiber Composite at Room and High Temperatures</li><li>A Variational Method for Fiber Stress Profiles in Unidirectional Composites with Matrix Creep</li><li>Basic Study of Progressive Crushing Mechanism</li><li>Numerical Simulation Technique for Progressive Crushing Behavior of FRP Tube under Impact Loading</li><li>Study on the Stress and Failure of Elastic-Plastic Interface for Fiber Composite</li><li>Tensile Properties of Thermoplastic Weft Knitted Composites</li><li>Effects of Fine-Particle Addition on Plasticity of Polymer Composites</li><li>Static and Dynamic Tensile Responses of Glass Woven Fabric Reinforced Composites</li><li>Orientation Relationship and Mechanical Properties of Rolled Polypropylene Sheets</li><li>Mechanical Properties and Fracture Mechanisms of Fiber Reinforced PBT/PC/Elastomer Blends</li><li>A Parametric Analysis of Surface Quality in Diamond Turning of an Al6061/SiC_p Metal Matrix Composite</li><li>An Investigation of Surface Roughness Formation in Ultra-Precision Machining of Al6061/SiC_p Metal Matrix Composites</li><li>The Localized Internal Necking Process between Microvoids in a Plastic Solid</li><li>A Study of Adiabatic Shear Plugging in Ti6Al4V Alloy</li><li>A Simplified Approach to Material Instability under High Strain-Rate Stretching</li><li>Strain Gradient Effect on Initiation of Adiabatic Shear Localization in Metal Matrix Composites</li><li>FEM Simulation of Torsion Tests for Pre-Deformed Lead with Work-Softening</li><li>Transformation Conditions in SMAs under Multiaxial Stress State: Experiments and Simulations</li><li>Constitutive Equation and Computational Simulation of Deformation Behavior of TRIP Steels</li><li>Deformation Behavior of Elastic-Plastic Materials Containing Instantly Transforming Inclusions</li><li>Transformation Condition in a Fe-Based Shape Memory Alloy Under Thermomechanical Loadings</li><li>Transformation Induced Plasticity in Maraging Steel: An Experimental Study</li><li>Prediction of Mechanical Properties of TRIP Steels by FEM and Micromechanics</li><li>Some Deformation Features of Polycrystalline Superelastic NiTi Shape Memory Alloy Thin Strips and Wires under Tension</li><li>Superelastic NiTi Memory Alloy Micro-Tube under Tension- Nucleation and Propagation of Martensite Band</li><li>Analysis of Tensile Strength of Y₂O₃ Stabilized ZrO₂</li><li>Homogenous Rolling and Texture Modelling in Cold Rolled Low Carbon Steel</li><li>Springback of Laterally Loaded Circular Plates</li><li>Deep Drawability of 5083 Al-Mg Alloy Sheet at Elevated Temperature and its Prediction</li><li>An Inverse Problem of Reinforced Panels Forming</li><li>FE Analysis of Springback in Hat-Bending with Consideration of Initial Anisotropy and the Bauschinger Effect</li><li>Computer-Aided Process Design for Tension Levelling of Clad Sheet Metal</li><li>Direct Evaluation of Sheet Metal Forming Properties under Various Deformation Conditions</li><li>On Alternative Representation of Forming Limits</li><li>Computer Aided Process Planning (CAPP) System for Non-Axisymmetric Deep Drawing Process</li><li>Experimental Study on Large Deformation in Fine-Blanking Process by Implementing Different Stripper Designs: Vee-Ring Type Vs. Plate-Type</li><li>A Study on Microstructure and Texture Evolution in Homogeneously Cold Rolled 93/7 Brass</li><li>Determining and Valuation the Zones of Minimal Reserves of Working Capacity for Concave and Convex Die</li><li>Experiments and Analysis of the Effect of Local Induction Heating on Deformation</li><li>Numerical Simulation of Non-Adiabatic Shear Banding in Metal Forming Process using Finite Element Method</li><li>Deformation Characteristics of Helical Gear with Small Bevel Angle during Net Shape Forging Process</li><li>Effect of Alloying Element on the Mechanical Behavior and Superficial Defects in Thixoforged Components of Al-Si Alloys</li><li>Finite Element Numerical Simulation Modeling for Reheating Process of Semi-Solid Forming</li><li>Design and Analysis of a Computer Integrated Open Die Forging Cell</li><li>Measurement of Friction Characteristics using a Three Pin System</li><li>An Internal Variable Approach to Superplasticity of Microduplex Pb-Sn Alloys</li><li>The Effect of Temperature and Strain Accumulation on the Superplastic Deformation Behavior of an Al-Cu-Zr Alloy</li><li>Superplasticity-like Deformation of a Coarse-Grained Al5052 Alloy</li><li>The Parameter Identification of Superplastic Constitutive Model Using Optimization</li><li>Texture Evolution during Low Temperature Superplasticity in Aluminum Alloys</li><li>The Strain Rate Cycling Induced Superplasticity and its Computer Optimization in Titanium Alloys</li><li>Discussion on Constitutive Equations of Fine-Grain Superplasticity</li><li>A Study on the Tensile Deformation of Superplastic-Like Al-Al₃Ni Eutectic Alloy with [111] Fiber Texture</li><li>Electron Backscattered Diffraction Study on Superplastic Properties of Coarse-Grained Fe-27at.% Al Based Alloys</li><li>The Effect of Reinforcement on Superplastic Flow in Powder-Metallurgy Processed Aluminium Matrix Composites</li><li>Research of Al-Zn 10-Mg-Zr Superplastic Alloy</li><li>Cavity Nucleation at Particles during Deformation at Elevated Temperature</li><li>Coupled-Multilevel Modeling for Hot Deformation and Sintering</li><li>Improvement of Post-Deformation Properties by Static Annealing for a High Strain Rate Superplastic Composite</li><li>Project of 'Towards Innovation in Superplasticity' in Japan</li><li>Softening Effects in the Bending of Tubular Structures and Components</li><li>Practical Computation of the Plastic Collapse Limit of Defective Pipelines under Complex Loadings</li><li>Dynamic Buckling of a Column with Adhesive Bonds</li><li>Collapse Analysis of Thin-Walled Structures by Finite Element Limit Analysis</li><li>The Characteristics of Collapse for Thin-Walled Members by Inclined Impact Load</li><li>Dynamic Plastic Buckling of Circular Cylindrical Shells Under Axial Impact</li><li>Modeling of Elastic-Plastic Beam-on-Foundation</li><li>Finite Element Analysis of Thin Walled Tubes under Point Loads Subjected to Large Plastic Deformation</li><li>Experimental Studies of Thin-Walled Circular Aluminium Tubes under Axial Loading</li><li>Large Deformation Model of Flat-topped Conical Shell under Axial Compression</li><li>Large Plastic Deformation of W-Beams Used as Guardrails on Highways</li><li>The Load Carrying Capacity of the Pressure Vessel with Two Defects along Axial Direction</li><li>The Calculation of Shakedown Loads for Contact Problems</li><li>On-Line Measurement of Heat Generation by Plastic Deformation in Some Structure Members</li><li>Hybrid Control of Inelastic Structures during Earthquake</li><li>Thin - Film Forming of Cluster Diamond-Dispersed Aluminum Composite by Dynamic Compaction</li><li>Microstructure and Friction Properties of Cluster Diamond Dispersed Cu Composite</li><li>Structural Analysis for Lightweight Design of a Seat Frame in Automotive Vehicles</li><li>Gradient Aspects of Crystal Plasticity at Micro and Macro Scales</li></ul>