Metallography XVI

<ul><li>Preface, Committees, Organizers</li><li>Invited Lectures</li><li>Open Questions in Nanosegregation</li><li>Active Screen Plasma Nitriding of Titanium Alloy Using Titanium Double Screen</li><li>Effect of Tempering on Microstructure and Mechanical Properties of Laser Welded and Post-Weld Treated AHSS Specimens</li><li>Effect of Temperature Dropping during Solution Treatment in Rejuvenation Heat Treatment and its Long-Term Heating Simulation on Microstructures of Nickel Base Alloy, Udimet 520</li><li>Microstructure of the NiMnGa Heusler Alloys Prepared by Suction Casting and Melt-Spinning</li><li>Analysis of Urnfield Period Bronze Droplets Formed during Casting</li><li>Chapter 1: Prediction, Process Simulation and Metallographic Methods</li><li>Possibilities of Stereological Analysis of Grain Boundary Orientation in Longitudinal Sections of Precision Cold Drawn Seamless Steel Tubes</li><li>Estimation of Fibre Orientation in Injection Moulding Plastics Parts</li><li>Application of Metallographic Methods for Thermal Ageing Evaluation on Samples from Primary Piping of NPP</li><li>Optimization of Surface Properties for Nanoindentation Studies on Nuclear Structural Materials</li><li>Effect of Grid Indentation Parameters on the Mechanical Characteristics of Steel Sheets by Depth Sensing Indentation</li><li>Steel Pile-Up Characterization by Atomic Force Microscopy</li><li>The Effect of Applied Load on Hardness of Steels</li><li>Metallographic Investigations of Silver Alloys Used for Minting</li><li>Preparation of Samples for <i>In Situ</i> Deformation Testing and Analysis of Microstructure Development</li><li>Possibilities of Usage of EBSD for Study of DC06 Steel Deformation</li><li>Preparation of Metallographic Samples with Anodic Layers</li><li>Chapter 2: Solidification and Solid State Transformation</li><li>The Study of Nonmetallic Inclusions Formation for Kaplan Blades during the Solidification Process</li><li>Evaluation of Chemical and Structural Heterogeneity in a Continuously Cast Steel Billet</li><li>Interrelationship between Hot Ductility and Particle Size in TiNb IF Steel</li><li>Precipitation in Cu-Bearing GOES at the Start of Primary Recrystallization</li><li>Optimalization of Tempering Temperature of 9CrNB Steel in Z?eleziarne Podbrezova? Steelworks</li><li>Changes of Microstructure and Grainsize of Martensitic Stainless Steel during the Processes of Hot Reversed Extrusion, Broaching and Heat Treating</li><li>Evaluation of Changes of Mechanical Properties of Selected Cr-Ni-Mo Steels for Heavy Forgings during Long Time Annealing</li><li>Aging Precipitation Behaviour of Cr-Mn-N Austenitic Stainless Steels</li><li>Precipitation of Secondary Phases in a Supermartensitic 13Cr6Ni2.5MoTi Steel during Heat Treatment</li><li>Microstructure and Mechanical Properties of 9CrNB Steel after Heat Treatment</li><li>Microstructure Modification of Tool Steel X38CrMoV5-1 by Fibre Laser</li><li>Relationship of Microstructure and Mechanical Properties of Dual Phase Steel after Various Annealing Conditions</li><li>Chapter 3: Welding</li><li>Microstructure Evaluation of Heterogeneous Electron Beam Weld between Stabilised Austenitic and ODS Ferritic Steel</li><li>Welding of Austenitic Stainless Steel AISI 304 by Fiber Laser</li><li>The Microstructure of Inconel Alloys Used for Repair Welding</li><li>Structure and Mechanical Properties of Welded Joints for Nuclear Power Plants of Type MIR 1200</li><li>Chapter 4: Interrelation of Material Properties and Microstructure</li><li>The Effect of Alloying Elements on Microstructure of 0,2%C TRIP Steel</li><li>Effect of Microsecond Pulse Laser Modification on Electromagnetic Properties of Grain Oriented Silicon Steel</li><li>Use of Metallographic Methods for Determining the Cause of Change of Magnetic Properties of Austenitic Steels</li><li>Structural Analysis of Plastic Deformation around the Crack Initiated in Austenitic Stainless Steel</li><li>The Effect of Cold Bending Process and Degradation at Boiler Conditions on the Properties of New Austenitic Creep Resistant Steel Super 304H for Boiler Super-Heaters Tubes</li><li>The Study of the Role of Fullerene Black Additive during the Modification of Ductile Cast Iron</li><li>The Effect of Heat Treatment on the Structure and Mechanical Properties of Austempered Iron with Vermicular Graphite</li><li>Deformation and Failure of Ultrafine-Grained Cu at Subambient Temperature</li><li>Chapter 5: Fractures, Defects and Material Degradation</li><li>Fracture Properties of Mg-Alloys Assessed with Nanoindentation</li><li>Analysis of the Causes of Boiler Explosion</li><li>The Use of Microstructural Analysis for the Evaluation of Quality of Double-Wall Tubes</li><li>Analysis of Surface Layer Defects on Carburized Steel Component after Alkaline Blackening</li><li>Microscopic Evaluation of a Damaged Press Casing and Analysis of Failure by Finite Element Method</li><li>Analysis of Damaged Crane Stroke Rope Caused by Contact with an Electric Trolley</li><li>Investigation of Failed Wheel Rim Weld Joints</li><li>Effect of Dew Point on the Selective Oxidation of Advanced High Strength Steels</li><li>Methodology for <i>In Situ</i> Microstructural Characterisation of AZ31 Magnesium Alloy Corrosion Degradation in Hanks' Solution</li><li>Influence of Microstructural Parameters on the Corrosion Resistance of 7075 Aluminum Alloy</li><li>Chapter 6: Fatigue and Creep</li><li>Metallographic Characterization and Fatigue Damage Initiation in Ti6Al4V Alloy Produced by Direct Metal Laser Sintering</li><li>Influence of the Direct Metal Laser Sintering Process on the Fatigue Behavior of the Ti6Al4V Alloy</li><li>Comparison of Results of Accelerated and Conventional Creep Tests of Dissimilar Weld Joint of Steels FB2 and F</li><li>The Change of the Structure and Mechanical Properties of the Austenitic Steels after Exposure at the Critical Temperature</li><li>Comparative Analysis of Creep Cavitation Damage in 0.5Cr-0.5Mo-0.3V Steel after Long-Term Creep Exposure by Metallography and Replica Testing</li><li>Chapter 7: Advanced Alloys for Industrial and Biomedical Application</li><li>Mechanical and Microstructural Properties of 2618 Al-Alloy Processed by SLM Remelting Strategy</li><li>Improvement of Microstructure and Mechanical Properties of Secondary AlSi8Cu2Mn Cast Alloy by Strontium</li><li>Study of Artificial Aging Temperature Effect on Morphology of Structural Parameters in Aluminium Cast Alloy</li><li>Metallographic Analysis of Parts Produced by Rheocasting Method SEED</li><li>Mechanical Properties of Extruded and ECAP Processed Magnesium Alloy AZ91 at Elevated Temperature</li><li>Grain Refinement of AZ61 Alloy after ECAP Processing</li><li>Effect of Structure and Cyclic Loading on the Internal Damping Capacity</li><li>Study of the Behavior to Cavitation Erosion of Some Bronzes with Varying Percentages of Sn and Pb</li><li>Microstructural and Mechanical Development of As-Cast and Heat-Treated 935AgCu Alloys</li><li>Biodegradable Metallic Materials for Temporary Medical Implants</li><li>Influence of Calcium on the Structure and Mechanical Properties of Biodegradable Zinc Alloys</li><li>Linear Potentiodynamic Characterization of ECAPed Biocompatible AZ91 Magnesium Alloy</li><li>Effect of Severe Plastic Deformation on Structure and Properties of Beta Titanium Alloy Using for Hip Implants</li><li>Metallography Evaluation of Cast and Wrought Ni-Base Superalloys</li><li>Long-Term Gamma Prime Phase Stability after Various Heat Treatment Conditions with Temperature Dropping during Solution Treatment in Cast Nickel Base Superalloy, Grade Inconel-738</li><li>Effect of Long-Term Aging on Microstructural Restoration in Cast Nickel Base Superalloy, GTD-111</li><li>Effect of Precipitation Aging Temperatures on Reheat Treated Microstructures and its Phase Stability after Long-Term Exposure in Cast Nickel Base Superalloy, Grade Inconel 738</li><li>Temperature Dependent Yield Strength, Strain Hardening and Failure of the CoCrFeNiMnV_x High Entropy Alloys</li><li>Chapter 8: Powder Metallurgy, Ceramics, Superconductors, Metallic Glasses and Composites</li><li>Effect of Alloying Elements on the Reactive Sintering Behaviour of NiTi Alloy</li><li>Effects of Nickel and Chromium Additions on Microstructure of P/M 316L Stainless Steels</li><li>Microstructure and Erosion Resistance of Zirconium Diboride Ceramics Infiltrated by Pure Copper</li><li>Microstructure Evaluation of Ceramic Materials Used in the Generation IV Reactors</li><li>Microstructure Characterization of La-Ca-Sr-Mn-O Magnetocaloric Ceramics Prepared by Spark Plasma Sintering Method</li><li>Study of Synthesis and Crystal Structure of Barium Cerate at High Temperatures</li><li>Preparation of Alumina Fibers by Needle-Less Electrospinning</li><li>YBCO Bulk Superconductors with Sm Addition</li><li>Microstructure YBCO Bulk Superconductors Fabricated by Infiltration Growth Process</li><li>Crack Propagation in Metallic Glass Ribbon as a Function of the Position of Stress Concentrators</li><li>Shear Band Morphology of Indented Region in Cu-Based Metallic Glass</li><li>Conchoidal Fracture of Zr- and Mg-Based Amorphous Glass</li><li>Applications of Nanocomposite-Enhanced Phase-Change Materials for Heat Storage</li><li>Detecting Water in Composite Sandwich Panels by Using Infrared Thermography</li><li>Reactions in Ternary System Al-B₂O₃-C during Mechanical Alloying</li><li>Fracture Analysis and Mechanical Properties of Magnesium Based Composites</li><li>Ni-NiO Porous Preform with Controlled Porosity Using Al₂O₃ Powder</li><li>Al-Limestone and Al-Granite Composites Prepared by Cold Spraying</li><li>Manufacturing and Mechanical Characterization of Bio-Based Laminates and Sandwich Structures</li><li>Microstructure and Crack Propagation of Electrically Conductive SiC Based Composites</li><li>Chapter 9: Intermetallic Compounds and Functional Coatings</li><li>The Effect of High-Temperature Deformation on the Structure of Iron Aluminides</li><li>Enhancement of Magnetic Properties of 41CrMo4 Steel by Means of Diffusion Coatings</li><li>Tungsten Carbide Dispersed High Cr-Ni Cast Iron Produced by Plasma Spraying</li><li>Powder Processing and Thermal Spraying of Barium-Magnesium-Aluminium-Silicate Environmental Barrier Coatings</li><li>Effect of Double Electron Beam Remelting on Microstructure of HVOF and CGDS Bond Coat</li><li>The Analyse of Nanocomposite Thin Coatings Using Specimens Prepared by Focused Ion Beam Milling</li><li>Chapter 10: Metallography in Archaeology (Archaeometallurgy)</li><li>Hardness Investigations on Historical Firearm Barrels from the Collection of the Miltary Museum in Budapest</li><li>Metallographic Investigations of a Late Medieval Pick Found at the Gold Mining Site "Goldzeche-Kleines Fleisstal", Austria</li><li>Material Investigation of Bronze Artefacts from the Late Bronze Age</li><li>Slag Investigations from Bronze Age Copper Smelting Sites</li><li>An Ancient Bronze Ingot Smelted from Fahlore</li></ul>