Energy Technology 2016
Carbon Dioxide Management and Other Technologies
Published on 16. December 2016
XIX, 192 pages
978-3-319-48182-1 (ISBN)
Description
Topics on CO2 sequestration and reduction in greenhouse gas emissions from process engineering and materials for clean energy are covered. Papers addressing sustainable technologies in extractive metallurgy, materials processing and manufacturing industries with reduced energy consumption and CO2 emission are also included, as well as industrial energy efficient technologies including innovative ore beneficiation, smelting technologies, recycling and waste heat recovery. The book also carries contributions from all areas of non-nuclear and non-traditional energy sources, including renewable energy sources such as solar, wind, biomass, etc. The book also emphasizes novel mineral beneficiation, processing, and extraction techniques leading to waste minimization of critical rare-earth materials used in energy systems (e.g., magnets, display and lighting devices).
More details
Other editions
Additional editions
Li Li | Donna Post Guillen | Neale R. Neelameggham
Energy Technology 2016
Carbon Dioxide Management and Other Technologies
Book
03/2016
1st Edition
Wiley-TMS
€154.50
Article exhausted; check different version
Persons
The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents. For more information on TMS, visit www.tms.org.
Content
1 - Cover [Seite 1]
2 - Half Title [Seite 2]
3 - Title Page [Seite 4]
4 - Copyright Page [Seite 5]
5 - Table of Contents [Seite 6]
6 - Preface [Seite 9]
7 - Editors [Seite 10]
8 - Session C hairs [Seite 17]
9 - Energy Technologies and Carbon Dioxide Management [Seite 18]
9.1 - Session I [Seite 19]
9.1.1 - Reduction of CO2 Emissions by Chemical Synthesis Processes in the Cement Industry [Seite 20]
9.1.2 - Research on Greenhouse Gas Emission of Solid Dust Recovery Using Rotary Hearth Furnace Process in China [Seite 28]
9.1.3 - Thermodynamic Analysis of Hydrogen Production from COG-Steam Reforming Process Using Blast Furnace Slag as Heat Carrier [Seite 37]
9.1.4 - CO2 Gasification of Catalysts-Loaded Petroleum Coke at Different Grinding M edium [Seite 44]
9.2 - Session II [Seite 52]
9.2.1 - Heat Recovery from High Temperature Slags: Chemical Methods [Seite 53]
9.2.2 - Corrosion Fatigue of X46Cr13 in CCS Environment [Seite 61]
9.2.3 - Power Generation by Organic Rankine Cycle from Low Temperature Waste Heat of Metallurgical Industry [Seite 69]
9.2.4 - Preparation of Ti-Al-V Alloys by Aluminothermic Reaction [Seite 77]
9.2.5 - Long Term Prediction of Linz-Donawitz Converter Gas (LDG) in Steel Making Process [Seite 85]
9.2.6 - Coke Modification Using Hydrothermal Oxidation Treatment [Seite 92]
9.2.7 - Optimization and Management of Byproduct Gas Distribution in Steel Mills Under Time-of-Use (TOU) Electricity Price [Seite 99]
9.3 - Session III [Seite 107]
9.3.1 - Preparation and Characterization of Stearic Acid/SiO2 Nano-encapsulated Phase Change Materials via Sol-gel Method [Seite 108]
9.4 - Session IV [Seite 116]
9.4.1 - Reduction of GHG Emissions through the Conversion of Dairy Waste to Value-Added Materials and Products [Seite 117]
9.4.2 - Study on Preparing Ti6Al4V Alloys from V-Ti Bearing Beach Placers [Seite 125]
9.4.3 - Particles Flow Behavior Around Tubes in Moving Bed [Seite 133]
9.5 - Poster Session [Seite 140]
9.5.1 - Effect of Microwave Irradiation on Graphitization of Carbon Matrix in Pulverized Coal [Seite 141]
9.5.2 - Effect of Microwave Irradiation on Improving Coal Grindability [Seite 150]
10 - High-Temperature Systems for Energy Conversion and Storage [Seite 156]
10.1 - Ceramic Reliability I [Seite 157]
10.1.1 - Thermomechanical Properties of Bilayer La2Zr2O7 Thermal Barrier C oatings [Seite 158]
10.2 - Recent Advancements in Solid Oxide Fuel Cell Technology II [Seite 164]
10.2.1 - An Improvement of SOFC Durability by the Mass Transport Analysis at the Interfaces [Seite 165]
11 - Systems for Energy Conversion and Storage I [Seite 173]
11.1 - CH4 Reforming by CO2 and O2 Using Ni-M (M= Cu, Fe, Co, Mn, Zn, Cr) Bimetallic Aerogel C atalysts [Seite 174]
11.2 - Electro-spraying and Combustion of Ethanol in a Micro-scale Combustor under Combined Electric Field [Seite 182]
12 - Author Index [Seite 189]
13 - Subject Index [Seite 191]
2 - Half Title [Seite 2]
3 - Title Page [Seite 4]
4 - Copyright Page [Seite 5]
5 - Table of Contents [Seite 6]
6 - Preface [Seite 9]
7 - Editors [Seite 10]
8 - Session C hairs [Seite 17]
9 - Energy Technologies and Carbon Dioxide Management [Seite 18]
9.1 - Session I [Seite 19]
9.1.1 - Reduction of CO2 Emissions by Chemical Synthesis Processes in the Cement Industry [Seite 20]
9.1.2 - Research on Greenhouse Gas Emission of Solid Dust Recovery Using Rotary Hearth Furnace Process in China [Seite 28]
9.1.3 - Thermodynamic Analysis of Hydrogen Production from COG-Steam Reforming Process Using Blast Furnace Slag as Heat Carrier [Seite 37]
9.1.4 - CO2 Gasification of Catalysts-Loaded Petroleum Coke at Different Grinding M edium [Seite 44]
9.2 - Session II [Seite 52]
9.2.1 - Heat Recovery from High Temperature Slags: Chemical Methods [Seite 53]
9.2.2 - Corrosion Fatigue of X46Cr13 in CCS Environment [Seite 61]
9.2.3 - Power Generation by Organic Rankine Cycle from Low Temperature Waste Heat of Metallurgical Industry [Seite 69]
9.2.4 - Preparation of Ti-Al-V Alloys by Aluminothermic Reaction [Seite 77]
9.2.5 - Long Term Prediction of Linz-Donawitz Converter Gas (LDG) in Steel Making Process [Seite 85]
9.2.6 - Coke Modification Using Hydrothermal Oxidation Treatment [Seite 92]
9.2.7 - Optimization and Management of Byproduct Gas Distribution in Steel Mills Under Time-of-Use (TOU) Electricity Price [Seite 99]
9.3 - Session III [Seite 107]
9.3.1 - Preparation and Characterization of Stearic Acid/SiO2 Nano-encapsulated Phase Change Materials via Sol-gel Method [Seite 108]
9.4 - Session IV [Seite 116]
9.4.1 - Reduction of GHG Emissions through the Conversion of Dairy Waste to Value-Added Materials and Products [Seite 117]
9.4.2 - Study on Preparing Ti6Al4V Alloys from V-Ti Bearing Beach Placers [Seite 125]
9.4.3 - Particles Flow Behavior Around Tubes in Moving Bed [Seite 133]
9.5 - Poster Session [Seite 140]
9.5.1 - Effect of Microwave Irradiation on Graphitization of Carbon Matrix in Pulverized Coal [Seite 141]
9.5.2 - Effect of Microwave Irradiation on Improving Coal Grindability [Seite 150]
10 - High-Temperature Systems for Energy Conversion and Storage [Seite 156]
10.1 - Ceramic Reliability I [Seite 157]
10.1.1 - Thermomechanical Properties of Bilayer La2Zr2O7 Thermal Barrier C oatings [Seite 158]
10.2 - Recent Advancements in Solid Oxide Fuel Cell Technology II [Seite 164]
10.2.1 - An Improvement of SOFC Durability by the Mass Transport Analysis at the Interfaces [Seite 165]
11 - Systems for Energy Conversion and Storage I [Seite 173]
11.1 - CH4 Reforming by CO2 and O2 Using Ni-M (M= Cu, Fe, Co, Mn, Zn, Cr) Bimetallic Aerogel C atalysts [Seite 174]
11.2 - Electro-spraying and Combustion of Ethanol in a Micro-scale Combustor under Combined Electric Field [Seite 182]
12 - Author Index [Seite 189]
13 - Subject Index [Seite 191]
