2013 Spring International Conference on Material Sciences and Technology (MST-S)

Preface
Chapter 1: Chemical Engineering and Technologies
Studies of Chemical Adsorption Membrane in the Steel Surface on Application
Synthesis of (S)-(+)-1,3-butanediol by asymmetric reduction of4-hydroxy-2-butanone with Immobilized yeast cells
Synthesis of (S)-Tert-Butyl 3-Hydroxybutyrate by Asymmetric Reduction of Tert-Butyl Acetoacetate with Saccharomyces cerevisiae B5
Supercritical Fluid Extraction of Polygonum cuspidatum and Subsequent Isolation by Simulated Moving Bed Chromatography
Anodic Plasma Electrolytic Nitrocarburizing of Low-Carbon Steel
Anodic Plasma Electrolytic Saturation of Steels by Carbon and Nitrogen
Interaction Mechanism between Bovine Serum Albumin and Polyethylene Glycol Revealed with Elastic Light Scattering Spectroscopy
COD Removal of Textile Printing and Dyeing Wastewater by Photocatalysis
Quaternary Reciprocal Systems with the Inner Diagonals: Variants of Polyhedration
Study on Extraction of Cucurbitacin B from the Pedicel of Cucumis melo L. by Acid Hydrolysis
Recovery of Uranium (VI) from Water Solutions by Membrane Extraction
Self-Assembled Au Electrode for Direct Electrochemistry of Horseradish Peroxidase and Detection of Hydrogen Peroxide
Comparison of One-Step Method and Two-Step Method of Ilmenite Concentrate Smelting Titanium Slag
Preparation of GR/HRP/Chit Modified Electrode and its Electrochemical Behaviors
The Synthesis and Investigation of Crystallographic and Adsorption Properties of TiO2 Powders
A New Primary Lithium Battery with Fluorinated Ketjenblack Cathode
Chapter 2: Materials Science and Technologies
The Influence of Different Surface Compressive Stress on the Wettability of Ion-Exchanged Float Aluminosilicate Glass
Microstructure and Anti-Friction Effect of Ball-Milled Expanded Graphite
Microstructure and Electrochemical Properties of Ce-Containing 7072 Al Alloy
First Principles Calculation on Adsorption of S on Fe(111)
Mechanical Properties and Fatigue Behavior of Age Treated Die Cast AlMg5Si2Mn Alloy
Dissolution, Crystallisation, and Sintering of a Raw Matt Glaze for Porcelain Tiles
Surface Characteristics of Anodized AZ91D with Potassium Permanganate in Alkaline by Various Time
High Temperature Resistance Effect of SrO/(SrO+CaO) in Alkali-Free Boro-Aluminosilicate Glasses
Influence of Different Cooling Systems on Surface Roughness in the Turning of the Ti-6Al-4V Alloy Used as Biomaterial
Syntheses of Tabular Cobalt Ferrite Crystal Using Non-Equilibrium Crystallization Conditions
Microwave Dielectric Properties and its Compatibility with Silver of Glass-Ceramic Based on Co-Fire at Low Temperature
Solidification Paths within the Ceramic Systems
Preparation and Characterization of SiCOH Film Using a New Precursor Trimethoxy [2-(oxabicyclo [4.1.0] hept-3yl) Ethyl] Silicane
Effect of UV Radiation and Leakage Current on Hydrophobicity of RTV Silicone Rubber
Use of Strain Energy Density W and Qo as Quality Indices for Rating the Quality of Cast Aluminium Alloy354 as a Function of Processing Parameters
Ultraviolet Detector Based on TiO2 Thin Film
Research on the Influence of Paper Smoothness on the Color Effect
Chapter 3: Nano Materials and Technologies
Comparisons of Nanocrystalline Cu, Ag, and Al Prepared by Room-Temperature-Molding Method and Vacuum-Warm-Compaction Method
Study of Hybrid Photovoltaic Materials with Poly(3-Hexylthiophene) and CdS Nanoparticles by Spectroscopic Techniques
Investigation of Nanomechanical and Aging Properties of Scratch-Resistant Coatings on Polycarbonate through Nanoindentation
Synthesis and Photoelectrical Properties of Graphene-CuxO Nanostructures
Morphological Studies of Polyphosphazenes and their Nano-Composites Using Solid-State Nuclear Magnetic Resonance Spectroscopy
A Novel Solvothermal Route to Nanocrystalline Sn4P3 with Red Phosphorous as Raw Material
A Simple and High-Performance Hydrazine Sensor Based on Graphene Nano Platelets Supported Metal Nanoparticles
Amperometric Biosensor for Hydrogen Peroxide Based on Glucose Oxidase Immobilized in Au Nanoparticles and 2,3-Dimercaptosuccinic Acid Self-Assembly Monolayers
A Simple Hydrogen Peroxide Biosensor Based on Catalase Immobilized in Nano-Structural Composite Film
A High-Performance Bimetallic Pd-Cu Nanoparticles Membrane on Glassy Carbon Electrode for Formic Acid Oxidation
Preparation of Poly(Vinylbenzyl Chloride)@Lead Sulfide (PVBC@PbS) Core-Shell Nanospheres and Adsorption of Phenol
Characterization of Iron Oxide Nanoparticles for Sol-Gel Dip-Coating Method Prepared Thin Films
Electrical Transport Properties of Single SiC NW-FET
Chapter 4: Polymer Materials and Technologies
The Influential Factors of Property on Polyether-Polyol Type Polyurethane Elastomer
The Study on the Influence of Molding Method and Thickness to Part Properties
Research on Hemocompatibility of Polypropylene Non-Woven Fabric Membrane Immobilized by N-Alkylglucosamides
Damage Progression in Unidirectionally Arrayed Chopped Strands Laminates with Different Slit Patterns under Tension
The Research on Adsorption Behaviors and Mechanisms of Geopolymers on Sr2+, Co2+ and Cs+
Chapter 5: Modelling, Numerical Simulation and Analysis in Material Engineering
A New Method of Calculating Recovery of Waterflooding Reservoir by Using Production Rate
Numerical Simulation of the Multi-Component Slurry Gasification with the Non-Premixed Combustion Model
Optimization of Extraction Technology of Favonoids from Kandelia Candel Leaves by Using Response Surface Methodology
Stress Analysis of the Underground Gas Storage Well Stored CNG Based on the Finite Element Method
A Closed-Form Solution of Effective Young's Modulus for Composites Including Multi-Shape Inclusions Using Improved Mori-Tanaka Model
Li,Na,Rb,La||F System for Molten Salt Reactor: 3D and 4D Computer Models