Key Engineering Materials VIII

<ul><li>Preface</li><li>Chapter 1: Polymers and Composites</li><li>Mechanical Properties of Chicken Feather Reinforced Unsaturated Polyester Composites</li><li>Dripping Behavior of Wire Fire under Varying Pressure and Electric Current</li><li>Mechanical Properties and Phase Morphology of Poly(Lactic Acid)/Acrylonitrile-Butadiene Rubber/Organoclay Nanocomposites Prepared by Melt Blending</li><li>Synthesis of Natural Surfactant of Sodium Lignosulfonate from Rice Husk Lignin by Ultrasound Assisted - Sulfonation</li><li>Effects of Molecular Weight of Chitosan on the Biodegradability and Thermal Properties of Polybutylene Succinate/Chitosan Composites</li><li>Feasibility Study of Selecting Soft Components of Body Armor</li><li>Damage Mechanism Analysis of Carbon Fiber Composites under Compressive Load</li><li>Fabrication and Stabilization of Poly(Acrylonitrile-?o-Methyl Acrylate) Nanofibers</li><li>Synthesis and Characterization of Transparent Conducting Film from Abaca Hybrid 7 Cellulose Acetate Blend and Polyaniline</li><li>Mechanochemical Assisted Modification of Parawood Microcrystalline Cellulose Using Silane Coupling Agent and their Composites Properties</li><li>Conduction in Polyaniline-Emeraldine Salt/Bentonite Composites Using Impedance Spectroscopy</li><li>Comparative Study of Compressive Strength of Epoxy Based Bio-Composites</li><li>Extracted Lignin from Rhizophora's Black Liquor as Fluid Loss Control Additive in Water Based Drilling Mud</li><li>Lamination of Chitin-Cellulose Film and Thermoplastic Starch</li><li>Coconut Shell Powder and Electrical Tree Inhibition of Solid Insulator</li><li>Fabrication of Polyaniline on Silane-Functionalized Zinc Oxide</li><li>Behaviour of CO₂-Polypropylene at Different Temperature Using Molecular Modelling Technique</li><li>Chapter 2: Nanomaterials and Biomaterials</li><li>Tribological Characterization of Polyacrylamide-Alginate Hybrid Hydrogels as a Potential Candidate for Cartilage Replacement</li><li>Synthesis of Calcium Ferrite Nanoparticles (CaFe₂O₄-NPs) Using Auto-Combustion Method for Targeted Drug Delivery</li><li>Characterization of Hydroxyapatite/ Silk Fibroin/ Chitosan Scaffold for Cartilage Tissue Engineering</li><li>Effects of Nano Particles Attached onto a Heat Transfer Surface in the Thermal-Hydraulic System</li><li>Characterization of the Mechanical Integrity of Cu Nanowire-Based Transparent Conducting Electrode</li><li>Hydrothermal Synthesis of NiCo₂O₄ Nanowires on Carbon Fiber Paper for Hydrogen Evolution Catalyst</li><li>Sintering of Silver Nanoparticles at Room-Temperature for Conductive Ink Applications</li><li>Experimental Investigation on Synthesis of Nanocrystalline Hydroxyapatite by the Mechanochemical Method</li><li>Investigation of the Electrical, Optical, and Mechanical Properties of Ag Nanowire Conducting Electrode</li><li>Microwave-Assisted Synthesis of Zinc Oxide Nanoparticles on Paper</li><li>Chapter 3: Functional Materials and Devices</li><li>The Changed of Behaviour of MR Fluid in MR Damper after a Long-Term Operation</li><li>Hybrid Magnetorheological Elastomer, the Future of Gait Detection</li><li>Magnetic Materials Used in the Magnetic Core Manufacture of Electrical Machines and Transformers</li><li>A Model of Magnetorheological Grease using Machine Learning Method</li><li>Study on the Effect of Salt Fog on Viscoelastic Material and Constrained Damping Structure</li><li>New Variable Stiffness Damper with Magnetorheological-Based Accumulator Control</li><li>Experimental Evaluation of Fundamental and Phase Change Characteristics for Carbon-Based Suspensions</li><li>Magnetic and Microwave Absorption Properties of Magnetite-Durian Shell Nanocomposite Sheet in Gigahertz Range</li><li>Morphological and Structural Characterization of YSZ Thin Film Fabricated by Electrophoretic Deposition on LSM/YSZ Substrate</li><li>Chapter 4: Materials for Electronics and Sensors</li><li>Experimental Study on Differentiating between Natural Honey and Honey Glucose Syrup by Using Hall Effect Sensor</li><li>Processing and Characterization of Amorphous Copper Oxide Thin Films Prepared by Reactive Magnetron Sputtering</li><li>Electrical Properties of Nanostructure n-ZnSe/p-Si(100) Heterojunction Thin Film Diode</li><li>Electroless Deposition of Silver Nanowires Using Waste Ethylene Glycol for Highly Transparent Flexible Conducting Electrodes</li><li>Effect of Temperature on 16 nm n-FiNFET</li><li>Ammonia Gas Detection Using Fabricated Zinc Oxide (ZnO) Nanoparticles on Glass Tube Substrates</li><li>Oxygen Atmosphere Annealing Effect on the Thermal Stability of TiO_2-x Based Films for Shutter-Less Infrared Image Sensors</li><li>Optical and Electrical Characterizations of Nanoscale Robust 3C-SiC Membrane for UV Sensing Applications</li><li>Comparison between Carbon Nanotube-Based, Graphite-Based, and Rice Hull Carbon-Based Electrodes with Rice Hull Silica as Catalyst for Electrochemical Detection of Copper</li><li>Chapter 5: Surfaces and Coatings</li><li>Effect of Frequency and Duty Cycle on Growth, Structure and Corrosion Resistance of Micro Arc Oxidation Coating on RZ5 Magnesium Alloy</li><li>Ultralow Fouling Surfaces from Self-Assembly of Copolymers with Sticky Biomimic Functional Groups</li><li>Effect of Silane-Treated Mineral Fillers on Corrosion, Wettability, and Adhesion of Saturated Polyester Coated on Carbon Steel</li><li>Polyaniline Emeraldine Salt Molecules Coated on Polyethylene Board Using SILAR Technique</li><li>Coating of Polyaniline Molecules on Cotton Fabric via Successive Ionic Layer Adsorption and Reaction (SILAR) Technique</li><li>Investigation of a Simultaneous Silicon-Modified Pack Aluminizing Method on Pure Nickel Using Quartz and RHA</li><li>Chapter 6: Materials for Electrochemical Applications</li><li>Effect of Precursor Grain Size on the Sinterability and Conductivity of Commercial Yttria-Stabilized Zirconia as Solid Electrolyte</li><li>Two-Step Synthesis of Cobalt Oxide Nanowires via Electroless Deposition and Thermal Oxidation for Supercapacitor Applications</li><li>One-Pot Synthesis of LiFePO₄ Nano-Particles Dispersed in N-Containing Melamine-Formaldehyde Carbon Matrix as the Cathode Materials for Large Scale Lithium Ion Batteries</li><li>Design and Implementation of Microbial Fuel Cell Using Carbon Paste Electrode</li><li>Chapter 7: Environmental and Chemical Engineering</li><li>Cogon Grass for Oil Sorption: Characterization and Sorption Studies</li><li>Burning Characteristics of Azeotropic Binary Blended Fuel Pool Fire</li><li>Removal of Heavy Polynuclear Aromatics by Activated Carbons</li><li>Novel Amphoteric Cryogels for Cd²⁺ Ions Removal from Aqueous Solutions</li><li>Assessment on the Synthesis and Performance of Low-Cost Chitosan-Coated Natural Zeolite Adsorbent for Post-Combustion Carbon Dioxide Capture</li><li>Experimental Study on Flame Spread over Inclined PMMA and PE Slabs</li><li>Synthesis of Hematite (?-Fe₂O₃) Nanostructures by Thermal Oxidation of Iron Sheet for Cr (VI) Adsorption</li><li>Development of Immobilized Activated Carbon-Enzyme for Decolorization of Black Liquor</li><li>Oil Extraction Residue from End-of-Life Tire Recycling as Carbon Black Substitute in Motorcycle Tires</li><li>Chapter 8: Alloys, Steel, Technologies of Machining and Metal Recovery</li><li>Leaching Behavior Analysis of Valuable Metals from Lithium-Ion Batteries Cathode Material</li><li>Recovery of Zinc and Manganese from Spent Zn-Mn Batteries Using Solvent Extraction</li><li>Extruded Mg-Sn-Al-Zn Alloys with Superior Tensile Properties</li><li>High-Temperature Corrosion of Ni₃Al+ 2.9%Cr Alloy in Ar-0.2%SO₂ Gas</li><li>Characterization of Laser Beam Welded Al_0.5CoCrFeNi High-Entropy Alloy</li><li>Effect of High Temperature Aging on Wear Resistance of a High-Nitrogen Stainless Steel</li><li>Research on the Mechanical Properties and Segregation Behavior of Pb-Al Alloys</li><li>A Study on Grain Size, Mechanical Properties and First Mode of Metal Transfer in Underwater Friction Stir Welded AA5052-O</li><li>The Grinding of the Worm for Worm Gear Set</li><li>Applications and Designs of Vibration-Assisted Machining Devices</li><li>Modelling and Optimization for Cutting Forces in Ultrasonic-Assisted Drilling of Soda Glass</li><li>Integrating Simulation with Experiment for Recycled Metal Matrix Composite (MMC-Al_R) Developed through Hot Press Forging</li><li>Precision Control of Kerf in Metal Cutting Using Dry Micro WEDM: Issues and Challenges</li><li>Effects of Elements on Mechanical and Electronic Properties of Ag from First-Principles Calculations</li><li>Chapter 9: Material Mechanics and Structural Mechanics</li><li>Method of Detecting Unexpected Load Leading to Crack Growth Acceleration</li><li>Analysis of Indentation on Layered Elastic Medium with Surface Energy Effects</li><li>Semi-Analytical or Inverse Identification of Yoshida-Uemori Hardening Model</li><li>On Computational Model of Nafion Membrane with Molecular Dynamic Method</li><li>A Study of Mechanical Property of Eggshell with Inverse Method and Finite Element Analysis</li><li>Characteristics of Three Structural Steels at High Strain Rate</li><li>Finite Element Analysis of Hyperelastic Material Model for Non-Pneumatic Tire</li><li>Material Properties of Natural Rubber Solid Tires for Finite Element Analysis</li><li>Chapter 10: Building Materials</li><li>Rock Wool and Printed Circuit Boards (PCBs) as Partial Fine Aggregate Replacements in Cement Mortar</li><li>Mechanical Properties of Natural Bamboo due to Tensile and Compression Loadings</li><li>Stabilization of Soft Bangkok Clay Using Portland Cement and Calcium Sulfoaluminate-Belite Cement</li><li>Evaluation of the Design Mix Proportion on Mechanical Properties of Engineered Cementitious Composites</li><li>Behaviour of Fly Ash and Rice Husk Ash Based Geopolymer Concrete</li><li>Effect of Glass Fiber on Shear Strength of Soil</li><li>Shrinkage Characteristics and Modeling of Cement Stabilized Road Pavement Bases: A Compaction Delay Investigation</li><li>Investigation of Gamma Ray Shielding and Compressive Strength of Concrete Containing Barite and Ferrophosphorous</li><li>Effect of Rice Husk Ash Silica as Cement Replacement for Making Construction Mortar</li><li>Influence from Fraction of Coverage to the Damping Capacity of Partial Constrained Layer Damping Structure</li></ul>