Key Engineering Materials VI

<ul><li>Preface, Committees</li><li>Chapter 1: Natural Rubber and Rubber Composites</li><li>Optimal Method of Selection of Water Lubricated Rubber Bearing Materials</li><li>Effect of Carbon Black Substitution with Raw and Modified Bentonite on the Thermal Aging Resistance of Natural Rubber Composites</li><li>Effect of Partial Replacement of Silica with Raw and Modified Bentonite on the Tensile Properties of Natural Rubber Composites</li><li>Synthesis of Novel Cationic Waterborne Polyurethane from Natural Rubber and its Properties Testing</li><li>Effect of Grit Type, Aging Temperature, and Aging Time on Particle Size of Ground Natural Rubber/Zeolite Composite Powder</li><li>Water Diffusion in Natural Rubber Vulcanizates: Effect of Ingredient Loading on Swelling and Mechanical Properties</li><li>Correlation of Blooming and Tensile Properties in Surfactant-Loaded Natural Rubber Vulcanizates</li><li>Cure and Mechanical Properties of Natural Rubber Filled Bacterial Cellulose</li><li>Compatibilization Efficiency of Polybutadiene-Grafted Maleic Anhydride in Ethylene-Propylene Diene Rubber/Epoxidized Natural Rubber Blends</li><li>Modification of Used Palm Oil: Preliminary Study of its Potentiality as Polyurethane Foam Precursors</li><li>Chapter 2: Polymers, Composites</li><li>Preparation and Properties of Solid Buoyancy Materials for Deep Sea with New Unsaturated Polyesters as Matrix</li><li>The Scrutiny of the Insulation Breakdown Strength for the Nanocomposite Oxide Doped Epoxy Resin Insulator with Different Electrodes by Using Positive Impulse Voltage</li><li>Poly(Vinyl Alcohol) (Core)-Polyurethane (Shell) Nanofibers Produced by Coaxial Electrospinning</li><li>Relationship between Tensile Modulus and Oxygen Uptake of Pro-Oxidant Loaded Low-Density Polyethylene Films during Heat Aging</li><li>Effect of Colorant Additive and Thickness on Tensile Properties of Oxo-Biodegradable PE Plastic Bags in Alkaline Solution</li><li>Effect of Morphology and Chemical Modification on Water Degradation Behavior of Polyvinyl Alcohol - Gelatin Blend</li><li>Effects of Gamma Radiation on Thermal and Mechanical Properties of Wood-Flour Filled Polybenzoxazines</li><li>Sorption and Degradation Behaviour of Epoxy Composites Reinforced with Amine-Coated Polyester Triangular Bars in Acid Environment</li><li>Improvement on Surface Tracking and Tensile Stress of Insulator via the Used of Aluminium Oxide Filler</li><li>Experimental Research on Bearing Strength and Effect Laws for Woven GFRP Composite Laminates</li><li>Repair of Flexuously Impact Damaged CFRTP Applying an Inserting Method with Tiny Melted Sheet of PP Resin Modified with Fine Glass Fibers</li><li>Experimental Study on Effect of Ceiling on Upward Flame Spread over Poly(Methyl Methacrylate) Sheets</li><li>Chapter 3: Sustainable Technologies in Chemical Engineering</li><li>Parametric Study of Silica Precipitation from Geothermal Brine</li><li>Development and Application of Bamboo Activated Carbons and their Potency as Adsorbent Material for Adsorbed Natural Gas (ANG); An Overview</li><li>Chapter 4: Materials and Technologies for Conversion, Storage and Supply of Energy</li><li>Effects of Dimethoxyethane as a Co-Solvent on Electrochemical Formation of a Surface Film on Graphite in an Ethylene Carbonate-Based Solution</li><li>Flexible Interdigital In-Plane Supercapacitor Based on Laser Reduced Graphene Oxide (LRGO)</li><li>Solid-State Synthesis and Characterization of Li_7-3xGa_xLa₃Zr₂O₁₂ Solid Electrolyte for Li-Ion Battery Application</li><li>Characterisation of Polymer Electrolytes Based on High Molecular Weight PVC and BMIMCF₃SO₃</li><li>Manufacturing and Macroscopic Properties of Warm Sprayed Cu-36at.%In-15at.%Ga Coating Layer</li><li>Chapter 5: Materials and Technologies for Micro- and Optoelectronics</li><li>
<i>In Situ</i> Electrochemical Study of Copper Nanoparticles Stabilized with Food Grade Gelatin</li><li>Design of High Speed and High Efficiency Single-Photon Detectors Using Silicon Avalanche Photodiodes</li><li>Electrical Characteristics of Different Gate Geometry of FinFET</li><li>Calculation of the Rate of Helium Ion Dispersion in Gallium Arsenide Compound</li><li>Photoresponse of Zinc Oxide-Polyaniline Junction at Different Light Intensities</li><li>Wettability of Selected Lead-Free Solders for Higher Application Temperatures</li><li>Chapter 6: Glasses and Special Alloys</li><li>Electrical and Optical Properties of Soda-Lime Glass Coated Using High Voltage Electrodeposition Technique</li><li>Strong Down-Conversion Emission of Sm³⁺ Doped Borotellurite Glass under 480 nm Excitation Wavelength</li><li>Viscosity and Density of Co-B Liquid Fusions</li><li>Effect of Mn-Content on the Deformation Behavior of Binary Ti-Mn Alloys</li><li>Thermodynamic Study on Interfacial Reaction between Molten Iron and Spinel</li><li>Chapter 7: Materials Processing Technologies</li><li>Comparative Study of Drilling Induced Delamination in CFRP with Different Ply Orientation</li><li>Effect of Gas Based Coolant Lubricants on Machinability of Titanium Alloy Ti6Al4V</li><li>Investigation of Microstructure in Friction Stir Welded Al-Cu-Li Alloy</li><li>Methodology of Uniform Filling Control for Vacuum Casting</li><li>Effect of Shielding Gas Mixture on Gas Metal Arc Welding (GMAW) of Low Carbon Steel (LR Grade A)</li><li>Parametric Analysis of Cylindrical Plunge Grinding on Micro-Alloyed Steel Using Taguchi Analysis</li><li>Chapter 8: Coatings, Surface Engineering, Films and Layers</li><li>Time Dependent High Dimension Model of Functional Gradient Thermal Barrier Coating Material</li><li>Hydrophobicity of Surfaces Coated with Functionalized Titanium Dioxide Nanoparticles</li><li>Butane/Propane Gas Sensing Using Zinc Oxide Film Grown by Successive Ionic Layer Adhesion and Reaction</li><li>Fabrication and Characterization of Ultra Water Repellent Surfaces on Aluminum Alloy Substrate</li><li>Morphological Studies on Spray Deposited Lanthanum Sulphide (La₂S₃) Thin Films</li><li>Chapter 9: Biomaterials</li><li>Bio-Electrospraying of Human Umbilical Vein Endothelial Cells with a Customized Multi-Hole Spinneret</li><li>Osteogenesis and Degradability of Bioresorbable Biphasic Gypsum-Carbonated Apatite Granules for Bone Tissue Engineering</li><li>Formation of Carbonated Apatite Layer in 1.5x Simulated Body Fluid at Different Refreshing Time</li><li>
<i>In Vitro</i> Bioactivity of Macroporous Calcium Phosphate Scaffold for Biomedical Application</li><li>Effect of Hydroxyapatite: Fibroin Ratio on Hydroxyapatite/Fibroin/Chitosan Porous Scaffold Characteristics</li><li>Chapter 10: Building Materials</li><li>Reflections on Mechanisms Affecting the Behavior of FRP-Concrete-Steel Double-Skin Tubular Columns</li><li>Modeling the Heat of Hydration of Concrete Incorporating Fly Ash</li><li>Optimization of Radiation Shielding Concrete for Radiotherapy Treatment Room at Bangabandhu Sheikh Mujib Medical University</li><li>Compressive Strength and Water Penetration of Concrete with <i>Enterococcus faecalis</i> and Calcium Lactate</li><li>Experimental Research on Creep Laws of High-Water Material under Real Pressure Water Environment</li><li>Chapter 11: Recycling and Waste Treatment</li><li>Application of Sand Casting to Recycle Aluminum Alloy for Motorcycle Brake Handle</li><li>How to Increase Plastic Waste Acceptance for Mechanical Recycling: An Introduction to Material Value Conservation and its Phenomenon</li><li>Processing Zinc from Waste of Used Zinc-Carbon Battery with Natrium Chloride (NaCl) for Biogas Desulfurizer</li><li>Precious Nickel Recovery from Palm Oil Mill Fuel Ash Waste (Ni-POMFAW) Using Acidic Leaching Extraction (ALE)</li><li>Remediation of Raw Wastewater of Palm Oil Mill Using Activated Cow Bone Powder through Batch Adsorption </li><li>Visible Light Photocatalytic Activity of Zinc Oxide-Copper Oxide Composites</li></ul>