Advanced Materials Design and Mechanics II
Published on 30. August 2013
700 pages
978-3-03826-178-0 (ISBN)
Description
Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Advanced Materials Design and Mechanics (ICAMDM2013), May 17-18, 2013, Kuala Lumpur, Malaysia.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 138 papers are grouped as follows:
Chapter 1: Material Science;
Chapter 2: Nanomaterials and Nanotechnologies, Ceramic Engineering;
Chapter 3: Building Materials and Their Applications, Housing;
Chapter 4: Construction Dynamics, Strength and Stress, Fatigue and Damage Analysis, Applied Mechanics;
Chapter 5: Advanced Manufacturing Technology, Machining and Processing, Welding and Joint Technologies;
Chapter 6: Tribology, Automotive and Vehicle Engineering;
Chapter 7: Photovoltaic and Solar Energy Engineering;
Chapter 8: Computer Technologies in Manufacturing, Simulation Technology, CAD and Software Applications.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 138 papers are grouped as follows:
Chapter 1: Material Science;
Chapter 2: Nanomaterials and Nanotechnologies, Ceramic Engineering;
Chapter 3: Building Materials and Their Applications, Housing;
Chapter 4: Construction Dynamics, Strength and Stress, Fatigue and Damage Analysis, Applied Mechanics;
Chapter 5: Advanced Manufacturing Technology, Machining and Processing, Welding and Joint Technologies;
Chapter 6: Tribology, Automotive and Vehicle Engineering;
Chapter 7: Photovoltaic and Solar Energy Engineering;
Chapter 8: Computer Technologies in Manufacturing, Simulation Technology, CAD and Software Applications.
More details
Series
Language
English
Place of publication
Zurich-Durnten
Switzerland
Target group
Professional and scholarly
Illustrations
Illustrations
File size
159,32 MB
ISBN-13
978-3-03826-178-0 (9783038261780)
DOI
10.4028/b-1IriDr
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Katsuyuki Kida
Advanced Materials Design and Mechanics II
Selected, peer reviewed papers from the 2013 2nd International Conference on Advanced Materials Design and Mechanics (ICAMDM2013), May 17-18, 2013, Kuala Lumpur, Malaysia
Book
10/2013
Trans Tech Publications Ltd
€276.53
Shipment within 10-15 days
Katsuyuki Kida
Advanced Materials Design and Mechanics II
Software
10/2013
Trans Tech Publications Ltd
€248.24
Shipment within 10-15 days
Content
Preface, Committees and Sponsors
Chapter 1: Material Science
The Effect of Sodium Chloride (NaCl) Coagulant Medium of Polysulfone Ultrafiltration Membrane
Performance Studies of Polysulfone-Based Membrane: Effect of Silica Morphology
Preparation of Marcoporous and Hollow Silica Microspheres with Raspberry-Like Organic Composite Particles as Templates
Development and Application of New Design Method by High-Strength Composite Material - Fusing of Optimum Strength Evaluation and Product Design
Structure and Magnetostriction of Melt-Spun Fe81-xNixGa19(x=0,5,10,15,20,25) Alloys
Sensitivity of the CFD Mesh for a Single Rising Bubble in a Hallimond Tube
Effects of Ni-B Addition on Microstructure and Properties of Sn-1.0Ag-0.5Cu Lead-Free Solder
Comparison of Liquid Phase Sintering and Cu-Melt Infiltration Methods to Consolidate 80W-Cu Composite Using Nickel as Sintering Activator
Design of the Diffuse Reflector Cup with Microstructure and the Research on the Optical Performance
Preparation and Characterizations of Ni Doped Mesoporous TiO2/SiO2
Scientifically Based Choice of Heat-Resistant Cast Aluminum Alloys of New Generation
Investigation of the Effect of Solidification Velocity on the Quality of Single Crystal Turbine Blades
Mechanochemical Synthesis of Magnesium Doped Hydroxyapatite: Powder Characterization
Study on Refinement Mechanism of Sc and Zr as-Cast Al-7.2Zn-2.2Mg-1.8Cu Alloys
Mathematical Modeling of Growth Conditions and Interpretation of Phase Diagram for InxGa1-xN Epitaxial Layer
The Surface and Interface Microstructure of Epitaxial Pr0.7Sr0.3MnO3/La0.5Ca0.5MnO3 Bilayer Structure
Structure and Properties of A Dimer Complex: [Co2(Hdmg)2(dien)2](ClO4)24.5(H2O)
Interpretation of Carbide Precipitation and Chromium Concentration Distribution of Alloy 690
Reaction Products of Lime Zeolite Stabilized Kaolin Humic Acid
Renewable Sugars Hydrolyzed from Banana Pseudo-Stem Using Different Chemical Pretreatments
Mechanical Properties of Particleboard from Oil Palm Trunk (Elaeis Guineensis Jacq) Using Phenol Formaldehyde Adhesive in Relation to Particle Sizes and Board Thickness
The Application Prospects Of Superconducting Materials In Household Products Design
Chapter 2: Nanomaterials and Nanotechnologies, Ceramic Engineering
Inorganic Nanoparticles Modified Molecular Beacons as Fluorescent DNA Biosensors
Fluorescent DNA Probes Based on Quantum Dots and Core/Shell Quantum Dots
Multiwall Carbon Nanotube Reinforced Aluminum Matrix Composites Prepared by Ball Milling
Characterization of ZnxCd1-xO Nanorods for PV Applications
Surface Modification and Characterization of Photodegradable Polystyrene-TiO2 Nanocomposites
Synthesis of Nickel Nanoparticles Encapsulated in a Hollow Silica Shell
Wettability of Carbon Nanotubes with Molten Sn-Ag-Cu Solder Alloy
Settling Characteristics of Alumina Nanoparticles in Ethanol-Water Mixtures
Size Control in ZnO Nanopillar Fabrication Using a Gel-Nanoimprint Process
Highly Efficient Degradation of Methylene Blue on Microwave Synthesized FeVO4 Nanoparticles Photocatalysts under Visible-Light Irradiation
Study on the Mechanism of Engineering Ceramics in Rotary Ultrasonic-Vibration Grinding
Densification Behavior of Nano Y-TZP Ceramics
Sintered Properties of Y-TZP/ZrB2 Ceramics
Oxygen Vacancy Comparisons for 3Y - TZP Sintered in Air and Argon Gas Atmosphere
Characteristics of Sintered Bovine Hydroxyapatite
Preparation and Study of the Hot Filament CVD Diamond Coated Tools
Chapter 3: Building Materials and their Applications, Housing
Biotic Attack in Claddings of Prefabricated Buildings
Influence of Building Materials on Building Airtightness
Thermal Analysis of Hydration Heat in Mass Concrete with Different Cement Binder Proportions
Effects of Shrinkage Reducing Admixture (SRA) on the Tensile Behavior of Strain-Hardening Cement Composite (SHCC)
Shear Behavior of Squat Steel Fiber Reinforced Concrete (SFRC) Shear Walls with Vertical Slits
Mechanical Properties of Sprayable Fiber Reinforced Strain-Hardening Cement Composite (SHCC)
Compressive Properties of High Strength Steel Fiber Reinforced Concrete with Different Fiber Volume Fractions
Damage Tolerance of Reinforced Concrete (RC) Beams with a Layer of PE Fiber Reinforced Strain-Hardening Cement Composite (PE-SHCC)
Influence of Fiber Volume Fraction and Aggregate Size on Flexural Behavior of High Strength Steel Fiber-Reinforced Concrete (SFRC)
Influences of Vertical Slits on the Shear Behavior of Strain-Hardening Cement Composite (SHCC) Infill Walls Based on FEM Analysis
An Experimental Study on Evaluation of Mechanical Properties in High Performance Concrete Using Admixture
Mechanical Properties of High Strength Concrete Using Mineral Admixtures
Properties of HPC with Fly Ash, Blast Furnace Slag and Silica Fume
Effect of Fly Ash, Silica Fume and Blast Furnace Slag on Mechanical Property of High Performance Concrete
The Application of Seismic Isolation Technology in Civil Engineering
Energy Savings through Integration of the Illumination Natural and Artificial, Using a System of Automatic Dimming: Case Study
Chapter 4: Construction Dynamics, Strength and Stress, Fatigue and Damage Analysis, Applied Mechanics
Stress Relaxation Behavior of Catheter Reinforced with Braid under Combined Loading for Bending and Torsion
Observation of Three Dimensional Magnetic Fields of Tool Steel (JIS-SKS93) around Vicker's Indentations
Influence of Repeated Quenching on Bearing Steel Martensitic Structure Investigated by Homology
Quantitative Estimates of Repeatedly Quenched High Carbon Bearing Steel
Research on Residual Fatigue Life Model for Lattice Boom of the Crane In-Service
Analysis of Local Stress of Lower Chord of Inverted Triangle Cargo Boom of Tower Crane under the Wheel Pressure
Creep of Rheocast 7075 Aluminum Alloy at 300 degreesC
Fatigue Life Prediction of Girth Gear-Pinion Assembly Used in Kilns by Finite Element Analysis
Reliability Analysis of the Hydraulic Support Pin
Transfer Matrix Method for the Determination of the Free Vibration of Two Elastically Coupled Beams
The Calculation Method of Axial Force in the Calculation of the Boom Tower Crane Stability
A Review and Prospect for Dynamic Load and Stability Check Method for Dual Derrick
Analysis of Effects of High Temperature and Loading Frequency on Asphalt Binder
Chapter 5: Advanced Manufacturing Technology, Machining and Processing, Welding and Joint Technologies
A Reclamation System via a Pins-Module Tool for Touch Sensing Material Surfaces
Monitoring the Coating Thickness of Pharmaceutical Tablets with MaxGWMA Control Chart
Permeable Rice Husk Fibre Shell Mould System
Feasibility Study on Noncontact Monitoring of Temperature Distributions of Rotating Tool
Flow Analysis of Melted Urea in a Perforated Rotating Bucket
Rule-Based Mamdani-Type Fuzzy Modeling of Heating and Cooling Performances of Counter Flow Ranque-Hilsch Vortex Tubes with Different Geometric Construction for Brass
Investigation of Performance of Heating and Cooling of Counter Flow Ranque-Hilsch Tubes with L/D=15, 16, 17, 18 for Brass
The Method of Improving Precision of Micro Injection Molding Machine Temperature Control
Study on Waste Aluminum Cans Remelting and Purification Technology
Tool Vibration due to High Speed Micro End Milling Parameters
Modular Tooling Concept in the Fabrication of the Precision AUV Blade
Control Problems for Heat-Conducting Viscous Fluid Flow in Manufacturing Processes
Integrated Dexels Geometric Model and Predictive Force Model for Feedrate Optimization in 03 Axis Milling Machine
R&D of a New De-Icing Device Based on Synthetically De-Icing Techniques
Experimental Investigation of Bubbly Flow Mixing inside a Washer Basin with an Immersed Coiled Heater
Finite Element Analysis of Modals Intermixture of Ultrasonic Motor and Separation Technique
Characteristics of STS630 Based Metal Injection Molding Products on Powder Size, Sintering and Heat Treatment Conditions
A Study on Deviations of the Jet with Traverse Speeds on Different Materials in Pocket Milling Using Abrasive Water Jet Machining Process
Parametric Study of Thermal Flow-Reversal Reactor for Ventilation Air Methane Oxidation
The Mechanism of Quasi-Dynamic Expansion Method and the Design of the Equipment for Manufacturing Biaxial Oriented PVC Pipes
Characterization of Forsterite Synthesized by Solid-State Reaction with Ball Milling Method
Effect of Drying on Physical Qualities and Sensory Evaluation of Herbal Germinated Brown Rice by Hot Air: Turmeric and Roselle
Study on the Improvement of Lamp Groups Production Line Based on IE
The Feasibility Study of Laser Particle Size Analyzer for Thick Pastes
Effects of Activated Carbon in Microwave Induction of Lateritic Ore
The Study of Three-Way Valve Handling Gripper
Force Load of Cutting Tool by Turning of Nickel Alloy Inconel 718 with Sintered Carbide Insert
Stamp Tooling Application for High Power LED Packaging Fabrication
Application of ISF Process for the Throttle Pedal Fixed Plate
Preparation and Testing of the Microstructure Diffuse Reflection Plate Based on the Continuous Extrusion
Analysis of the Effect the Modal-Parameter on the Milling Stability
Artificial Neural Network Approach for Impingement Drying of Germinated Brown Rice Soaking with Turmeric Solution
Design and Analysis of Compliant Rotary Joint
Effect of Welding Speed and Tool Pin Profile on Weld Quality of Friction Stir Welded Semi-Solid Aluminium Alloy 356
Dissimilar Materials Joining between SSM 356-T6 and AA6061-T651 by Friction Stir Welding
Titanium Alloy Welding Using Middle Range Power Pulsed Wave Laser
A New Type of Feed Valve Design and Application
Dry Machining of Brass Using Titanium Carbonitride (TiCN) Coated Tool
Chapter 6: Tribology, Automotive and Vehicle Engineering
Comparison of Wear on PEEK-PTFE and PPS-PTFE Radial Bearings under Rolling Contact Fatigue
Change in Backlash of Humanoid Robot Joints under High Load
Experimental Analysis of Tool Wear when Drilling Carbon Fibre Composite (CFC) without Cutting Fluid, with Cutting Fluid and with a Pre-Cryogenically Cooled Tool
Fretting Wear of Coated Substrate with Interlayer: Substrate Stress Behaviour
Investigation on the Interaction between Plasticity Response and Fretting Wear under Gross Sliding Condition
Vibration Analysis and Improvement of a Vehicle Chassis Structure
Design and Analysis of Automotive Multi-Leaf Springs Using Composite Materials
Dual Clutch Automatic Transmission Two Clutch Starting Control and Simulation
Modeling of Helical Gear Power Tri-Branching Transmission Based on Loaded Tooth Contact Analysis
Vibration Characteristics and Optimization of Variable Cross-Section Cylindrical Shell Structure under Multi-Point Excitation
Chapter 7: Photovoltaic and Solar Energy Engineering
Photovoltaic Systems in University of Miyazaki
Heat Release Effect of Thermal Emission Coating on Concentrator Photovoltaic Module
Crystal Quality Improvement of CuInS2 Thin Film by Two Step Fabrication Method with Bismuth Addition
Zn (O,S):Al Films Prepared by Radio Frequency Magnetron Sputtering for Transparent Electrode
Growth of CuInGaSe2 Films by RF Sputtering Using CuInGaSe2 Single Phase Target
Effect of Anti-Soiling Coating on Performance of Fresnel Lens for Concentrator Photovoltaic Module
Effect of Film Thickness on the Structure and Electrical Properties of CuInSe2 Thin Films
Minimization of Open Circuit Voltage Fluctuation of Quantum Dot Based Solar Cell Using InN
Design, Fabrication and Performance Analysis of Single Basin Solar Stills
Chapter 8: Computer Technologies in Manufacturing, Simulation Technology, CAD and Software Applications
ANFIS Modelling of Carbon Removal in Domestic Wastewater Treatment Plant
Solution of Working Space about the 4-DOF Parallel Mechanism by ADAMS
Fault Tolerant Scheme of Switched Reluctance Machines for the Electro-Mechanical Actuation Systems
The Natural Characteristics of Fluid Conveying Pipe under Different Supporting Conditions
Effect of Beam Profile Size on Bus Superstructure Strength Having Rollover Crash
Fire Computer-Simulated Fire Scene Verification of Entertainment Establishments
Simulation Based Logistics Distribution Planning and Analysis for an Assembly Line of Engineering Machinery Products
Fault Diagnostic Equipment of Fire Control System Based on FTA
Numerical Simulation of Granite on Pre-Stressed Machining by Discrete Element Method (DEM)
Study Effects of Vehicle Velocity on a Road Surface Roughness Simulation
Total Design of Active Neck Support System for Economy Class Aircraft Seat
FEM-Based Simulation and Gripper Jaw Trajectory Fitting of Stretch-Bending Process for a Bending Beam of Railway Vehicles
Chapter 1: Material Science
The Effect of Sodium Chloride (NaCl) Coagulant Medium of Polysulfone Ultrafiltration Membrane
Performance Studies of Polysulfone-Based Membrane: Effect of Silica Morphology
Preparation of Marcoporous and Hollow Silica Microspheres with Raspberry-Like Organic Composite Particles as Templates
Development and Application of New Design Method by High-Strength Composite Material - Fusing of Optimum Strength Evaluation and Product Design
Structure and Magnetostriction of Melt-Spun Fe81-xNixGa19(x=0,5,10,15,20,25) Alloys
Sensitivity of the CFD Mesh for a Single Rising Bubble in a Hallimond Tube
Effects of Ni-B Addition on Microstructure and Properties of Sn-1.0Ag-0.5Cu Lead-Free Solder
Comparison of Liquid Phase Sintering and Cu-Melt Infiltration Methods to Consolidate 80W-Cu Composite Using Nickel as Sintering Activator
Design of the Diffuse Reflector Cup with Microstructure and the Research on the Optical Performance
Preparation and Characterizations of Ni Doped Mesoporous TiO2/SiO2
Scientifically Based Choice of Heat-Resistant Cast Aluminum Alloys of New Generation
Investigation of the Effect of Solidification Velocity on the Quality of Single Crystal Turbine Blades
Mechanochemical Synthesis of Magnesium Doped Hydroxyapatite: Powder Characterization
Study on Refinement Mechanism of Sc and Zr as-Cast Al-7.2Zn-2.2Mg-1.8Cu Alloys
Mathematical Modeling of Growth Conditions and Interpretation of Phase Diagram for InxGa1-xN Epitaxial Layer
The Surface and Interface Microstructure of Epitaxial Pr0.7Sr0.3MnO3/La0.5Ca0.5MnO3 Bilayer Structure
Structure and Properties of A Dimer Complex: [Co2(Hdmg)2(dien)2](ClO4)24.5(H2O)
Interpretation of Carbide Precipitation and Chromium Concentration Distribution of Alloy 690
Reaction Products of Lime Zeolite Stabilized Kaolin Humic Acid
Renewable Sugars Hydrolyzed from Banana Pseudo-Stem Using Different Chemical Pretreatments
Mechanical Properties of Particleboard from Oil Palm Trunk (Elaeis Guineensis Jacq) Using Phenol Formaldehyde Adhesive in Relation to Particle Sizes and Board Thickness
The Application Prospects Of Superconducting Materials In Household Products Design
Chapter 2: Nanomaterials and Nanotechnologies, Ceramic Engineering
Inorganic Nanoparticles Modified Molecular Beacons as Fluorescent DNA Biosensors
Fluorescent DNA Probes Based on Quantum Dots and Core/Shell Quantum Dots
Multiwall Carbon Nanotube Reinforced Aluminum Matrix Composites Prepared by Ball Milling
Characterization of ZnxCd1-xO Nanorods for PV Applications
Surface Modification and Characterization of Photodegradable Polystyrene-TiO2 Nanocomposites
Synthesis of Nickel Nanoparticles Encapsulated in a Hollow Silica Shell
Wettability of Carbon Nanotubes with Molten Sn-Ag-Cu Solder Alloy
Settling Characteristics of Alumina Nanoparticles in Ethanol-Water Mixtures
Size Control in ZnO Nanopillar Fabrication Using a Gel-Nanoimprint Process
Highly Efficient Degradation of Methylene Blue on Microwave Synthesized FeVO4 Nanoparticles Photocatalysts under Visible-Light Irradiation
Study on the Mechanism of Engineering Ceramics in Rotary Ultrasonic-Vibration Grinding
Densification Behavior of Nano Y-TZP Ceramics
Sintered Properties of Y-TZP/ZrB2 Ceramics
Oxygen Vacancy Comparisons for 3Y - TZP Sintered in Air and Argon Gas Atmosphere
Characteristics of Sintered Bovine Hydroxyapatite
Preparation and Study of the Hot Filament CVD Diamond Coated Tools
Chapter 3: Building Materials and their Applications, Housing
Biotic Attack in Claddings of Prefabricated Buildings
Influence of Building Materials on Building Airtightness
Thermal Analysis of Hydration Heat in Mass Concrete with Different Cement Binder Proportions
Effects of Shrinkage Reducing Admixture (SRA) on the Tensile Behavior of Strain-Hardening Cement Composite (SHCC)
Shear Behavior of Squat Steel Fiber Reinforced Concrete (SFRC) Shear Walls with Vertical Slits
Mechanical Properties of Sprayable Fiber Reinforced Strain-Hardening Cement Composite (SHCC)
Compressive Properties of High Strength Steel Fiber Reinforced Concrete with Different Fiber Volume Fractions
Damage Tolerance of Reinforced Concrete (RC) Beams with a Layer of PE Fiber Reinforced Strain-Hardening Cement Composite (PE-SHCC)
Influence of Fiber Volume Fraction and Aggregate Size on Flexural Behavior of High Strength Steel Fiber-Reinforced Concrete (SFRC)
Influences of Vertical Slits on the Shear Behavior of Strain-Hardening Cement Composite (SHCC) Infill Walls Based on FEM Analysis
An Experimental Study on Evaluation of Mechanical Properties in High Performance Concrete Using Admixture
Mechanical Properties of High Strength Concrete Using Mineral Admixtures
Properties of HPC with Fly Ash, Blast Furnace Slag and Silica Fume
Effect of Fly Ash, Silica Fume and Blast Furnace Slag on Mechanical Property of High Performance Concrete
The Application of Seismic Isolation Technology in Civil Engineering
Energy Savings through Integration of the Illumination Natural and Artificial, Using a System of Automatic Dimming: Case Study
Chapter 4: Construction Dynamics, Strength and Stress, Fatigue and Damage Analysis, Applied Mechanics
Stress Relaxation Behavior of Catheter Reinforced with Braid under Combined Loading for Bending and Torsion
Observation of Three Dimensional Magnetic Fields of Tool Steel (JIS-SKS93) around Vicker's Indentations
Influence of Repeated Quenching on Bearing Steel Martensitic Structure Investigated by Homology
Quantitative Estimates of Repeatedly Quenched High Carbon Bearing Steel
Research on Residual Fatigue Life Model for Lattice Boom of the Crane In-Service
Analysis of Local Stress of Lower Chord of Inverted Triangle Cargo Boom of Tower Crane under the Wheel Pressure
Creep of Rheocast 7075 Aluminum Alloy at 300 degreesC
Fatigue Life Prediction of Girth Gear-Pinion Assembly Used in Kilns by Finite Element Analysis
Reliability Analysis of the Hydraulic Support Pin
Transfer Matrix Method for the Determination of the Free Vibration of Two Elastically Coupled Beams
The Calculation Method of Axial Force in the Calculation of the Boom Tower Crane Stability
A Review and Prospect for Dynamic Load and Stability Check Method for Dual Derrick
Analysis of Effects of High Temperature and Loading Frequency on Asphalt Binder
Chapter 5: Advanced Manufacturing Technology, Machining and Processing, Welding and Joint Technologies
A Reclamation System via a Pins-Module Tool for Touch Sensing Material Surfaces
Monitoring the Coating Thickness of Pharmaceutical Tablets with MaxGWMA Control Chart
Permeable Rice Husk Fibre Shell Mould System
Feasibility Study on Noncontact Monitoring of Temperature Distributions of Rotating Tool
Flow Analysis of Melted Urea in a Perforated Rotating Bucket
Rule-Based Mamdani-Type Fuzzy Modeling of Heating and Cooling Performances of Counter Flow Ranque-Hilsch Vortex Tubes with Different Geometric Construction for Brass
Investigation of Performance of Heating and Cooling of Counter Flow Ranque-Hilsch Tubes with L/D=15, 16, 17, 18 for Brass
The Method of Improving Precision of Micro Injection Molding Machine Temperature Control
Study on Waste Aluminum Cans Remelting and Purification Technology
Tool Vibration due to High Speed Micro End Milling Parameters
Modular Tooling Concept in the Fabrication of the Precision AUV Blade
Control Problems for Heat-Conducting Viscous Fluid Flow in Manufacturing Processes
Integrated Dexels Geometric Model and Predictive Force Model for Feedrate Optimization in 03 Axis Milling Machine
R&D of a New De-Icing Device Based on Synthetically De-Icing Techniques
Experimental Investigation of Bubbly Flow Mixing inside a Washer Basin with an Immersed Coiled Heater
Finite Element Analysis of Modals Intermixture of Ultrasonic Motor and Separation Technique
Characteristics of STS630 Based Metal Injection Molding Products on Powder Size, Sintering and Heat Treatment Conditions
A Study on Deviations of the Jet with Traverse Speeds on Different Materials in Pocket Milling Using Abrasive Water Jet Machining Process
Parametric Study of Thermal Flow-Reversal Reactor for Ventilation Air Methane Oxidation
The Mechanism of Quasi-Dynamic Expansion Method and the Design of the Equipment for Manufacturing Biaxial Oriented PVC Pipes
Characterization of Forsterite Synthesized by Solid-State Reaction with Ball Milling Method
Effect of Drying on Physical Qualities and Sensory Evaluation of Herbal Germinated Brown Rice by Hot Air: Turmeric and Roselle
Study on the Improvement of Lamp Groups Production Line Based on IE
The Feasibility Study of Laser Particle Size Analyzer for Thick Pastes
Effects of Activated Carbon in Microwave Induction of Lateritic Ore
The Study of Three-Way Valve Handling Gripper
Force Load of Cutting Tool by Turning of Nickel Alloy Inconel 718 with Sintered Carbide Insert
Stamp Tooling Application for High Power LED Packaging Fabrication
Application of ISF Process for the Throttle Pedal Fixed Plate
Preparation and Testing of the Microstructure Diffuse Reflection Plate Based on the Continuous Extrusion
Analysis of the Effect the Modal-Parameter on the Milling Stability
Artificial Neural Network Approach for Impingement Drying of Germinated Brown Rice Soaking with Turmeric Solution
Design and Analysis of Compliant Rotary Joint
Effect of Welding Speed and Tool Pin Profile on Weld Quality of Friction Stir Welded Semi-Solid Aluminium Alloy 356
Dissimilar Materials Joining between SSM 356-T6 and AA6061-T651 by Friction Stir Welding
Titanium Alloy Welding Using Middle Range Power Pulsed Wave Laser
A New Type of Feed Valve Design and Application
Dry Machining of Brass Using Titanium Carbonitride (TiCN) Coated Tool
Chapter 6: Tribology, Automotive and Vehicle Engineering
Comparison of Wear on PEEK-PTFE and PPS-PTFE Radial Bearings under Rolling Contact Fatigue
Change in Backlash of Humanoid Robot Joints under High Load
Experimental Analysis of Tool Wear when Drilling Carbon Fibre Composite (CFC) without Cutting Fluid, with Cutting Fluid and with a Pre-Cryogenically Cooled Tool
Fretting Wear of Coated Substrate with Interlayer: Substrate Stress Behaviour
Investigation on the Interaction between Plasticity Response and Fretting Wear under Gross Sliding Condition
Vibration Analysis and Improvement of a Vehicle Chassis Structure
Design and Analysis of Automotive Multi-Leaf Springs Using Composite Materials
Dual Clutch Automatic Transmission Two Clutch Starting Control and Simulation
Modeling of Helical Gear Power Tri-Branching Transmission Based on Loaded Tooth Contact Analysis
Vibration Characteristics and Optimization of Variable Cross-Section Cylindrical Shell Structure under Multi-Point Excitation
Chapter 7: Photovoltaic and Solar Energy Engineering
Photovoltaic Systems in University of Miyazaki
Heat Release Effect of Thermal Emission Coating on Concentrator Photovoltaic Module
Crystal Quality Improvement of CuInS2 Thin Film by Two Step Fabrication Method with Bismuth Addition
Zn (O,S):Al Films Prepared by Radio Frequency Magnetron Sputtering for Transparent Electrode
Growth of CuInGaSe2 Films by RF Sputtering Using CuInGaSe2 Single Phase Target
Effect of Anti-Soiling Coating on Performance of Fresnel Lens for Concentrator Photovoltaic Module
Effect of Film Thickness on the Structure and Electrical Properties of CuInSe2 Thin Films
Minimization of Open Circuit Voltage Fluctuation of Quantum Dot Based Solar Cell Using InN
Design, Fabrication and Performance Analysis of Single Basin Solar Stills
Chapter 8: Computer Technologies in Manufacturing, Simulation Technology, CAD and Software Applications
ANFIS Modelling of Carbon Removal in Domestic Wastewater Treatment Plant
Solution of Working Space about the 4-DOF Parallel Mechanism by ADAMS
Fault Tolerant Scheme of Switched Reluctance Machines for the Electro-Mechanical Actuation Systems
The Natural Characteristics of Fluid Conveying Pipe under Different Supporting Conditions
Effect of Beam Profile Size on Bus Superstructure Strength Having Rollover Crash
Fire Computer-Simulated Fire Scene Verification of Entertainment Establishments
Simulation Based Logistics Distribution Planning and Analysis for an Assembly Line of Engineering Machinery Products
Fault Diagnostic Equipment of Fire Control System Based on FTA
Numerical Simulation of Granite on Pre-Stressed Machining by Discrete Element Method (DEM)
Study Effects of Vehicle Velocity on a Road Surface Roughness Simulation
Total Design of Active Neck Support System for Economy Class Aircraft Seat
FEM-Based Simulation and Gripper Jaw Trajectory Fitting of Stretch-Bending Process for a Bending Beam of Railway Vehicles
