Science and Engineering of Materials
Published on 18. June 2014
324 pages
978-3-03826-473-6 (ISBN)
Description
Collection of selected, peer reviewed papers from the 1st International Conference on Science & Engineering of Materials 2013 (ICoSEM 2013), November 13-14, 2013, Kuala Lumpur, Malaysia.
The 61 papers are grouped as follows:
Chapter 1: Biomaterials;
Chapter 2: Catalytic Materials;
Chapter 3: Ceramics;
Chapter 4: Coating and Surface Engineering;
Chapter 5: Composites;
Chapter 6: Electronic and Electronic Packaging;
Chapter 7: Concrete and Structural Materials;
Chapter 8: Material Modeling and Simulations;
Chapter 9: Environmentally Sustainable Materials and Processing;
Chapter 10: Materials Conversion And Renewable Energy;
Chapter 11: Materials For Energy Storage;
Chapter 12: Metal and Alloys;
Chapter 13: Nanotechnology;
Chapter 14: Polymers
The 61 papers are grouped as follows:
Chapter 1: Biomaterials;
Chapter 2: Catalytic Materials;
Chapter 3: Ceramics;
Chapter 4: Coating and Surface Engineering;
Chapter 5: Composites;
Chapter 6: Electronic and Electronic Packaging;
Chapter 7: Concrete and Structural Materials;
Chapter 8: Material Modeling and Simulations;
Chapter 9: Environmentally Sustainable Materials and Processing;
Chapter 10: Materials Conversion And Renewable Energy;
Chapter 11: Materials For Energy Storage;
Chapter 12: Metal and Alloys;
Chapter 13: Nanotechnology;
Chapter 14: Polymers
More details
Series
Language
English
Place of publication
Zurich-Durnten
Switzerland
Target group
Professional and scholarly
Illustrations
Illustrations
File size
56,25 MB
ISBN-13
978-3-03826-473-6 (9783038264736)
DOI
10.4028/b-SXg8S8
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Mohd Rafie Johan | Darman Singho Noorsaiyyidah
Science and Engineering of Materials
Selected, peer reviewed papers from the 1st International Conference on Science & Engineering of Materials 2013 (ICoSEM 2013), November 13-14, 2013, Kuala Lumpur, Malaysia
Book
08/2014
Trans Tech Publications Ltd
€184.46
Shipment within 10-15 days
Mohd Rafie Johan | Darman Singho Noorsaiyyidah
Science and Engineering of Materials
Software
08/2014
Trans Tech Publications Ltd
€198.26
Shipment within 10-15 days
Content
Preface and Committees
Chapter 1: Biomaterials
Biomimetic Porosity of Gelatin-Hydroxyapatite Scaffold for Bone Tissue
Removal of Pb (II) by CS2 Modified Kenaf Powder
The Effects of YSZ-Al2O3 Addition on Hydroxyapatite Fabricted by Powder Metallurgy
The Potential of Quercetin in Psidium guajava L. Leaves Extract as Bioinhibitor for Controlled Released Fertilizer
Synthesis and Properties of Biphasic Calcium Phosphate Prepared by Different Methods
Chapter 2: Catalytic Materials
Decolorization of Methylene Blue by Photocatalyst in the Ag3PO4-AgI System
Chapter 3: Ceramics
Investigation of Ultrasonic Pretreatment on the Synthesis of Zeolite-T and its CO2 Adsorption Characteristics
Sintering Effects on Microstructure and Electrical Properties of (Na0.5K0.5)0.94Li0.06NbO3 Lead-Free Ceramics
Vapochromic Copper (I) Pyrazolate Complex Materials for Phosphorescent Chemosensors of Ethanol
Chapter 4: Coating and Surface Engineering
A Study on Biocompatibility of Gadolinium Based Anodizing Coating AZ91D Magnesium Alloy in Simulated Body Fluid (SBF) Solution
Characterization of Oxide Film by Vanadium Based Anodic Oxidation Coating
Investigation of Surface Characteristics of Hydroxyapatite/Titanium Composite Layer Obtained by HF Magnetron Sputtering
Chapter 5: Composites
Basalt Carbon Hybrid Composite for Wind Turbine Rotor Blades: A Short Review
Effect of Maleic Anhydride Grafted Poly(actic acid) on Properties of Sawdust/Poly(lactic acid) Composites Toughened with Poly(butylene adipate-co-terephthalate)
Effects of Sawdust Content and Alkali Treatment on Mechanical and Flame Retarding Properties of Sawdust/Recycled High Density Polyethylene Composites
Electron Beam Crosslinking of EVA/ENR-50/HNTS Nanocomposites in the Presence of Trimethylol Propane Triacrylate, TMPTA
Quasi-Static Flexural and Indentation Behaviour of Polymer-Metal Laminate
Chapter 6: Electronic and Electronic Packaging
Corrosion Behavior of Soldered and Laser-Welded Ni-Free Co-Cr Alloy Joints in Sodium Chloride Solution
Deposition of Amorphous Boron Carbide Films with Pulsed Magnetron Sputtering and Evaluation of their Mechanical Properties
Fabrication and Characterization of RF Magnetron Sputtered Silicon Oxide Films
Fabrication Method of Mems Based Clamped-Clamped Resonant Magnetometer
Humidity Sensors on Thermally Oxidized Silicon Substrates
Influence of Spinning Speed on the Properties of Sol-Gel Spin Coated ZnO Films
Microstructural and Electrical Conductivity of Annealed ZnO Thin Films
Preparation and Mechanical Characterization of Amorphous B-C Films
Relationship between Precursor Gas Flow Rate with the Structural and Morphology Properties of Diamond like Carbon Films
Surface Plasma Characterization of Polyimide Films for Flexible Electronics
Undoped Diamond-Like Carbon Thin Films Grown by Direct Current-Plasma Enhanced Chemical Vapour Deposition: Structural and Electrical Properties
Chapter 7: Concrete and Structural Materials
Effects of Aggregate Size on Concrete Shear Strength
Improving the Properties of Oil Palm Shell (OPS) Concrete Using Polyvinyl Alcohol (PVA) Coated Aggregates
Chapter 8: Material Modeling and Simulations
Development of Rapid Tooling for Investment Casting Using Fused Deposition Modeling Process
Modeling the Release of Urea from Coated Urea: The Constant Release Stage
Statistical Analysis of Binder Behavior during Debinding Step in Powder Injection Molding (PIM)
Rigid-Plastic Finite Element Simulation of Cold Forging and Sheet Metal Forming by Eulerian Meshing Method
Chapter 9: Environmentally Sustainable Materials and Processing
Development of Water Adsorbents Synthesized from Spent Bleaching Earth to Dehydrate Ethanol Water Mixture
Kinetic and Isotherm Adsorption Studies of Methylene Blue on Sulfuric Acid Treated Spent Grated Coconut (Cocos nucifera)
Monosodium Glutamate Functionalized Chitosan Beads for Adsorption of Precious Cerium Ion
Preliminary Study on Analysis of the Chemical Compositions and Characterization of Empty Fruit Bunch (EFB) in Malaysia
Solvent Extraction of Light Rare Earth Ions Using D2EHPA from Nitric Acid and Sulphuric Acid Solutions
Chapter 10: Materials Conversion and Renewable Energy
A Non-Isothermal Thermo Gravimetric Kinetic Analysis of Malaysian Poultry-Processing-Dewatered-Sludge
Enhancement of the Efficiency of Dye-Sensitized Solar Cells (DSSC) by Utilizing Silver Plasmonic Nanoparticles on Hydrothermally-Treated Titania (TiO2) Photoanode
The Prospects of Electricity Generation from Poultry Processing Dewatered Sludge (PPDS) in Malaysia
Chapter 11: Metal and Alloys
A Study of Surface Hardening on Local Bolts (C= 0.01%) at a Temperature of 400 degreesC for 5 and 6 Hours with Nitrocarburizing Using RF-Plasma Apparatus
Effects of Complexing Agent Concentration and Bath pH on Electroless Nickel Deposition for Tungsten Carbide Powders
Formation of Expanded Austenite Using Hybrid Low Temperature Thermochemical Heat Treatment on 2205 Duplex Stainless Steel
High Temperature Oxidation Effect on the Dissolution Rate of Hot-Dip Aluminized Steel in Aluminum Melt
Investigation the Structural and Magnetic Properties of FINEMET Type Alloy Produced by Mechanical Alloying
Chapter 12: Nanotechnology
Effect of Sepiolite Content on Mechanical and Flammability Properties of Ethylene Vinyl Acetate Nanocomposite
Effect of Vacancy and Stone-Wales Defects on the Shear Strength of Carbon Nanotube-Polymer Interfaces
Effects of Heat Generation or Absorption on Free Convection Flow of a Nanofluid Past an Isothermal Inclined Plate
Investigation of Nanoscale Structure of Self-Emulsifying Drug Delivery System Containing Poorly Water-Soluble Model Drug
Simple and Low-Cost Preparation of Carbon-Coated Titanium Dioxide via Hydrothermal Method
Synthesis and Characterization of Mn2+ Doped ZnS Using Reverse Miceller Method
Synthesis of Silica-Coated Copper Nanoparticles and its Application to Red Color Glaze
Synthesis, Optical, Photocatalytic and Bactericidal Properties of Nanocrystalline ZnO Powders by Precipitation Method
Chapter 13: Polymers
Alumina Reinforced Epoxidized Natural Rubber in Latex Phase Mixing: Effect of Alumina Content
Changes in Characteristics and Physicochemical through Vermicomposting of Pome Sludge by Epigeic Earthworm E. eugeniae
Effect of the Addition of Nano-Clay on the Physical Property and the Melt-Spinnability of Bacterial Polyester
Mechanical, Thermal, and Morphological Properties of Thermoplastic Starch/Poly(lactic acid/Poly(butylene adipate-co-terephthalate) Blends
Quasi-Static Indentation Behaviour of Glass Fibre Reinforced Polymer
Rheological Behavior Characterization of Natural Rubber Containing Different Gel
Surface Modification of Poly(lactic acid) (PLA) via Alkaline Hydrolysis Degradation
The Effect of Wollastonite Filler on Thermal Performance of Intumescent Fire Retardant Coating
Chapter 1: Biomaterials
Biomimetic Porosity of Gelatin-Hydroxyapatite Scaffold for Bone Tissue
Removal of Pb (II) by CS2 Modified Kenaf Powder
The Effects of YSZ-Al2O3 Addition on Hydroxyapatite Fabricted by Powder Metallurgy
The Potential of Quercetin in Psidium guajava L. Leaves Extract as Bioinhibitor for Controlled Released Fertilizer
Synthesis and Properties of Biphasic Calcium Phosphate Prepared by Different Methods
Chapter 2: Catalytic Materials
Decolorization of Methylene Blue by Photocatalyst in the Ag3PO4-AgI System
Chapter 3: Ceramics
Investigation of Ultrasonic Pretreatment on the Synthesis of Zeolite-T and its CO2 Adsorption Characteristics
Sintering Effects on Microstructure and Electrical Properties of (Na0.5K0.5)0.94Li0.06NbO3 Lead-Free Ceramics
Vapochromic Copper (I) Pyrazolate Complex Materials for Phosphorescent Chemosensors of Ethanol
Chapter 4: Coating and Surface Engineering
A Study on Biocompatibility of Gadolinium Based Anodizing Coating AZ91D Magnesium Alloy in Simulated Body Fluid (SBF) Solution
Characterization of Oxide Film by Vanadium Based Anodic Oxidation Coating
Investigation of Surface Characteristics of Hydroxyapatite/Titanium Composite Layer Obtained by HF Magnetron Sputtering
Chapter 5: Composites
Basalt Carbon Hybrid Composite for Wind Turbine Rotor Blades: A Short Review
Effect of Maleic Anhydride Grafted Poly(actic acid) on Properties of Sawdust/Poly(lactic acid) Composites Toughened with Poly(butylene adipate-co-terephthalate)
Effects of Sawdust Content and Alkali Treatment on Mechanical and Flame Retarding Properties of Sawdust/Recycled High Density Polyethylene Composites
Electron Beam Crosslinking of EVA/ENR-50/HNTS Nanocomposites in the Presence of Trimethylol Propane Triacrylate, TMPTA
Quasi-Static Flexural and Indentation Behaviour of Polymer-Metal Laminate
Chapter 6: Electronic and Electronic Packaging
Corrosion Behavior of Soldered and Laser-Welded Ni-Free Co-Cr Alloy Joints in Sodium Chloride Solution
Deposition of Amorphous Boron Carbide Films with Pulsed Magnetron Sputtering and Evaluation of their Mechanical Properties
Fabrication and Characterization of RF Magnetron Sputtered Silicon Oxide Films
Fabrication Method of Mems Based Clamped-Clamped Resonant Magnetometer
Humidity Sensors on Thermally Oxidized Silicon Substrates
Influence of Spinning Speed on the Properties of Sol-Gel Spin Coated ZnO Films
Microstructural and Electrical Conductivity of Annealed ZnO Thin Films
Preparation and Mechanical Characterization of Amorphous B-C Films
Relationship between Precursor Gas Flow Rate with the Structural and Morphology Properties of Diamond like Carbon Films
Surface Plasma Characterization of Polyimide Films for Flexible Electronics
Undoped Diamond-Like Carbon Thin Films Grown by Direct Current-Plasma Enhanced Chemical Vapour Deposition: Structural and Electrical Properties
Chapter 7: Concrete and Structural Materials
Effects of Aggregate Size on Concrete Shear Strength
Improving the Properties of Oil Palm Shell (OPS) Concrete Using Polyvinyl Alcohol (PVA) Coated Aggregates
Chapter 8: Material Modeling and Simulations
Development of Rapid Tooling for Investment Casting Using Fused Deposition Modeling Process
Modeling the Release of Urea from Coated Urea: The Constant Release Stage
Statistical Analysis of Binder Behavior during Debinding Step in Powder Injection Molding (PIM)
Rigid-Plastic Finite Element Simulation of Cold Forging and Sheet Metal Forming by Eulerian Meshing Method
Chapter 9: Environmentally Sustainable Materials and Processing
Development of Water Adsorbents Synthesized from Spent Bleaching Earth to Dehydrate Ethanol Water Mixture
Kinetic and Isotherm Adsorption Studies of Methylene Blue on Sulfuric Acid Treated Spent Grated Coconut (Cocos nucifera)
Monosodium Glutamate Functionalized Chitosan Beads for Adsorption of Precious Cerium Ion
Preliminary Study on Analysis of the Chemical Compositions and Characterization of Empty Fruit Bunch (EFB) in Malaysia
Solvent Extraction of Light Rare Earth Ions Using D2EHPA from Nitric Acid and Sulphuric Acid Solutions
Chapter 10: Materials Conversion and Renewable Energy
A Non-Isothermal Thermo Gravimetric Kinetic Analysis of Malaysian Poultry-Processing-Dewatered-Sludge
Enhancement of the Efficiency of Dye-Sensitized Solar Cells (DSSC) by Utilizing Silver Plasmonic Nanoparticles on Hydrothermally-Treated Titania (TiO2) Photoanode
The Prospects of Electricity Generation from Poultry Processing Dewatered Sludge (PPDS) in Malaysia
Chapter 11: Metal and Alloys
A Study of Surface Hardening on Local Bolts (C= 0.01%) at a Temperature of 400 degreesC for 5 and 6 Hours with Nitrocarburizing Using RF-Plasma Apparatus
Effects of Complexing Agent Concentration and Bath pH on Electroless Nickel Deposition for Tungsten Carbide Powders
Formation of Expanded Austenite Using Hybrid Low Temperature Thermochemical Heat Treatment on 2205 Duplex Stainless Steel
High Temperature Oxidation Effect on the Dissolution Rate of Hot-Dip Aluminized Steel in Aluminum Melt
Investigation the Structural and Magnetic Properties of FINEMET Type Alloy Produced by Mechanical Alloying
Chapter 12: Nanotechnology
Effect of Sepiolite Content on Mechanical and Flammability Properties of Ethylene Vinyl Acetate Nanocomposite
Effect of Vacancy and Stone-Wales Defects on the Shear Strength of Carbon Nanotube-Polymer Interfaces
Effects of Heat Generation or Absorption on Free Convection Flow of a Nanofluid Past an Isothermal Inclined Plate
Investigation of Nanoscale Structure of Self-Emulsifying Drug Delivery System Containing Poorly Water-Soluble Model Drug
Simple and Low-Cost Preparation of Carbon-Coated Titanium Dioxide via Hydrothermal Method
Synthesis and Characterization of Mn2+ Doped ZnS Using Reverse Miceller Method
Synthesis of Silica-Coated Copper Nanoparticles and its Application to Red Color Glaze
Synthesis, Optical, Photocatalytic and Bactericidal Properties of Nanocrystalline ZnO Powders by Precipitation Method
Chapter 13: Polymers
Alumina Reinforced Epoxidized Natural Rubber in Latex Phase Mixing: Effect of Alumina Content
Changes in Characteristics and Physicochemical through Vermicomposting of Pome Sludge by Epigeic Earthworm E. eugeniae
Effect of the Addition of Nano-Clay on the Physical Property and the Melt-Spinnability of Bacterial Polyester
Mechanical, Thermal, and Morphological Properties of Thermoplastic Starch/Poly(lactic acid/Poly(butylene adipate-co-terephthalate) Blends
Quasi-Static Indentation Behaviour of Glass Fibre Reinforced Polymer
Rheological Behavior Characterization of Natural Rubber Containing Different Gel
Surface Modification of Poly(lactic acid) (PLA) via Alkaline Hydrolysis Degradation
The Effect of Wollastonite Filler on Thermal Performance of Intumescent Fire Retardant Coating
