Energy Technology 2015

Session Chairs xix

Energy Technologies and Carbon Dioxide Management Symposium 2015

<b>Carbon Management</b>

A Thermodynamic Study of Mixed Carbon Feedstock Gasification Slags 5
<i>J. Nakano, M. Duchesne, J. Bennett, K. Kwong, and A. Nakano</i>

Evaluation of Heat Treatment Performance of Potential Pipe Steels in CCS-Environment 15
<i>A. Pfennig, H. Wolthusen, P. Zastrow, and A. Kranzmann</i>

Economic Assessment of Methanol Synthesis by C02 from Coal-Fired Power Plants 23
<i>Y. Wang and Y. Dai</i>

Thermal Wastes from Energy Conversions and Global Anthropogenic Warming 29
<i>N. Neelameggham and B. Davis</i>

<b>Iron & Steel</b>

Influence of the Initial Solidification Controlling on the Energy Saving during Continuous Casting 39
<i>L. Zhou and W. Wang</i>

Performance of Twin Oxygen-Coal Lances for PCI Operation in Blast Furnace Iron Making 47
<i>F. Meng, H. Tang, and Z. Zhao</i>

Energy Saving and C02 Emission Reducing Analysis of Chinese Iron and Steel Industry 55
<i>Q. Zhang, Y. Li, Y. Shen, and H. Dong</i>

Investigation on the Heat Recovery from High Temperature Slags 65
<i>Y. Sun and Z. Zhang</i>

Optimal Distribution of Byproduct Gases in Iron and Steel Industry Based on Mixed Integer Linear Programming (MILP) 73
<i>X. Zhao, H. Bai, Q. Shi, J. Han, and H. Li</i>

<b>Metal Processing / Molten Salt / Electrochemistry</b>

Energy Efficient Separation of Magnetic Alloy from the Carbothermic Reduction of Nkana Cu-Co Concentrates 83
<i>Y. Hara and A. Jha</i>

LCA Evaluation for Different Treatment Processes of Nickel Laterite Ore 93
<i>S. Wang, H. Li, C. Li, X. Hao, Q. Bao, and L. Zhang</i>

Low Temperature Sulphidization of Cu-Co Slag in the Presence of Calcium Sulphide 105
<i>Y. Hara and A. Jha</i>

A Kinetic Analysis of Acid Leaching of Niobium and Zirconium from Titania Waste Residue Stream: An Energy Efficient Methodology for the Reclamation of Metal Values 115
<i>T. Makanyire, A. Jha, and S. Sutcliffe</i>

The Optimization Formula Design of CuxZn!_xO Infrared Radiation Material and Coating Slurry 123
<i>Y. Ding, H. Bai, C. Lian, W. Wei, and W. Liu</i>

The Role of Austenitizing Routines of Pipe Steels during CCS 131
<i>A. Pfennig, J. Schiz, and A. Kranzmann</i>

Evaluation of Surface Tension for the NaN03-KN03-Ca(N03)2 System and Its Sub-System 139
<i>J. Xu, J. Zhao, J. Wang, J. Li, and K. Wan</i>

<b>Solar Energy</b>

Development of High Flux Solar Simulators for Solar Thermal Research 149
<i>B. Ekman, G. Brooks, and M. Rhamdhani</i>

<b>Recycling and Sustainability Update Waste</b>

The Removal of Phosphate and Ammonia Nitrogen from Wastewater Using Steel Slag 165
<i>X. Ping, Y. Liyun, R. Aikebaier, and B. Hao</i>

Sustainable Recycling Technologies for Bauxite Residue (Red Mud) Utilization 173
<i>J. Ahn, T. Thriveni, and S. Nam</i>

<b>Recycling</b>

Investigation on Recycling of Ag from Pb-Cu-Ag Alloy by Vacuum Distillation 183
<i>B. Song, W. Jiang, B. Yang, B. Xu, Q. Yang, S. Xu, and D. Liu</i>

Recycling of Sinter Plant Offgas Cleaning System Dust by Pre-Agglomeration 193
<i>N. Ma</i>

Recovery of Metals from Waste Printed Circuit Boards by Leaching with l-Ethyl-3-Methyl-Imidazolium Hydrogen Sulfate Ionic Liquid 201
<i>T. Atalay, A. Kiligarslan, andM. Saridede</i>

Application of 1-Methylimidazolium Hydrogen Sulfate Ionic Liquid to the Oxidative Leaching of Copper and Zinc in Industrial Brass Dross 209
<i>A. Kiligarslan and M. Saridede</i>

<b>Poster Session</b>

Experimental Study on Reduction in Low Grade Lateritic Nickel Ore Mixed with Pickling Sludge 219
<i>Y. Feng, Y. Sun, J. Zhang, and Q. Li</i>

Recycling Wastes in the Alumina and the Cement Industry 227
<i>N. Ilyoukha and V. Timofeeva</i>

Evaluation of the Silver Recovery from Radiographic Films in a Filter Press Electrochemical Reactor 233
<i>P. Ortega, V. Cruz, L. Hernandez, D. Islas, M. Guerrero, and L. Lechuga</i>

Leaching of Gold from Printed Circuit Boards Scrap of Mobile Phones 243
<i>A. Kasper and H. Veit</i>

<b>Magnetic Materials for Energy Applications Soft Magnetic Materials I</b>

Effect of Electric Current Pulse on Grain Boundary of Grain Oriented Silicon Steel during Primary Recrystallization Annealing 255
<i>Z. Lu, L. Li, W. Nan, X. Jiang, and Q. Zhai</i>

<b>Soft Magnetic Materials II</b>

Magnetostriction of Co-Fe-Based Amorphous Soft Magnetic Microwires 265
<i>A. Zhukov, M. Churyukanova, S. Kaloshkin, V. Sudarchikova, S. Gudoshnikov, M. Ipatov, A. Talaat, J. Blanco, and V. Zhukova</i>

<b>Poster Session</b>

Magneto structural Transition in Heusler Mn-Ni-In Melt Spun Ribbons 275
<i>H. Li, J. Ren, J. Yu, and H. Zheng</i>

Magnetic Properties of Nanocrystalline Microwires 283
<i>A. Talaat, V. Zhukova, M. Ipatov, J. Blanco, P. Klein, R. Varga, L. Gonzalez-Legarreta, B. Hernando, and A. Zhukov</i>

On Magnetocaloric Properties of (Pr,Dy)Fe9 Alloys 291
<i>R. Guetari, C. Cizmas, K Zehani, L. Bessais, and N. Mliki</i>

<b>Sustainable Energy and Layered Double Hydroxides</b>

<b>Sustainable Energy and Layered Double Hydroxides</b>

Technical Innovation and Entrepreneurial Potential of "Hydrotalcite Like" Materials 301
<i>D. Cocke, P. Latiolais, A. Gomes, and G. Beall</i>

Layered Double Hydroxides in Energy Research: Advantages and Challenges 309
<i>A. Gomes, D. Cocke, D. Tran, and A. Baksi</i>

Modelling the Structure and Vibrational Properties of Layered Double Hydroxides 317
<i>E. Andre, J. Fahel, and C. Carteret</i>

Synthesis of Hydrotalcite-Like Compounds from Blast Furnace Slag: The Effect of Synthesis Parameters on Structure and Crystallinity 325
<i>M. He, J. Zhang, Z. Shi, F. Liu, andX. Li</i>

<b>High-Temperature Systems for Energy Conversion and Storage Solid Oxide Fuel Cell: Recent Developments II</b>

Evaluating Electrophoretically Deposited Cu-Mn-0 Spinel Coatings on Stainless Steel Substrates Used in Solid Oxide Fuel Cell Interconnects 337
<i>M. Galbo, K. Yoon, U. Pal, S. Gopalan, and S. Basu</i>

<b>Innovation in Energy Conversion and Storage I</b>

Degradation of Sm2Zr207 Thermal Barrier Coating Caused by Calcium-Magnesium-Aluminum-Silicon Oxide (CMAS) Deposition 347
<i>H. Wang, Z. Sheng, E. Tarwater, X. Zhang, S. Dasgupta, and J. Fergus</i>

<b>Structural Materials, Heat Transport Fluids, and Novel System Designs for High Power and Process Heat Generation Heat Transport Fluids I</b>

Minimum System Entropy Production for the Figure of Merit of High Temperature Heat Transfer Fluid Properties 359
<i>P. Li and Y. Zhang</i>

Author Index 373

Subject Index 375