THERMEC 2021

<ul><li>Preface</li><li>Plenary</li><li>Recent Developments in the Processing of Advanced Materials Using Severe Plastic Deformation</li><li>Keynotes</li><li>Achieving Superplasticity in Fine-Grained Al-Mg-Sc Alloys</li><li>Improvement in Mechanical Performance of Biomaterial Ti Alloy by Controlling Volume Fraction of Martensite Phase</li><li>Additive Manufacturing of Ti6Al4V with Wire Laser Metal Deposition Process</li><li>Model Description of the Unusual Temperature Dependence of the Viscosity of Metallic Glass-Forming Liquids</li><li>Mechanical Stress Issues of La_0.6Sr_0.4Co_0.2Fe_0.8O_3-?</li><li>Effects of Al, Si and N Content on the Formation of M-A Constituent and HAZ Toughness of Ti-Containing Low-Carbon Steel</li><li>Grain Orientation Spread in Dynamically Recrystallized Austenitic Steel</li><li>Effect of the Morphology, Size, Distribution and Homogeneity of Carbides and Matrix on Wear Resistance in High Cr-Alloys White Cast Iron</li><li>Friction Stir Welded AISI 304 Metal Sheets for Application in Food Implants</li><li>The Use of Transient Liquid Phases in Powder Metallurgy</li><li>Austenitic Grain Size Effect on the Phase Transformation of a 7.0% Cr Steel for Forging</li><li>Evolution of Carbides during Prestrain and Tempering</li><li>Detonation Spraying of Metal Carbides Composites</li><li>How to Master Interfaces in MMCs with Reactive Constituents</li><li>Synchrotron 3D ?-Tomography of Porosity during Hot Isostatic Pressing of a Single-Crystal Nickel-Base Superalloy</li><li>Evaluation of Cu-Ni-Based Alloys for Thermoelectric Energy Conversion</li><li>Mechanical and Thermal Properties of Harmonic Structured Composites by MM/SPS Process</li><li>Time-, Temperature- and Frequency-Dependent Viscoelastic Properties of a Curing Epoxy Adhesive</li><li>Fatigue Behavior of Age-Hardening Cu-6Ni-1.5Si Alloys with Different Grain Sizes</li><li>Processing Strategies for Hot-Rolled Medium-Mn Steels</li><li>Development and Characterization of New Ti-25Ta-Zr Alloys for Biomedical Applications</li><li>Effect of Microshot Peening on Fatigue Strength of Austenite Stainless Steel</li><li>Mechanical Properties of Interface Layers in SiC/TiAl Composite</li><li>Inferences of Baking Time on Hydrogen Embrittlement for High Strength Steel Treated with Various Zinc Based Electroplating</li><li>Influence of Substitution of Fe by Mo on Heat Treatment Behavior in Ti-Mo-Fe Alloys</li><li>Layer-Thickness Dependence of Hardness and Local Bucking Behavior in Electrodeposited Ni-Co-Cu/Cu Multilayered Films</li><li>Hardness Development of Mechanically-Bonded Hybrid Nanostructured Alloys through High-Pressure Torsion</li><li>Energy Absorption of Additively Manufactured Porous Metals with Disordered Cells</li><li>Experimental Characterization and Modelling of the PLC Effect in an AlMg-Alloy</li><li>Influence of Strain-Hardening and Dynamic Recovery on DDRX Steady State</li><li>Ultrasonic Processing of Magnesium Alloy for Property Enhancement</li><li>Computer Prediction of Phase Fraction in Multipass Weld of Duplex Stainless Steel - Proposal of Microstructural Improvement Welding Process -</li><li>Effect of Particle Morphology on Thermal Properties of TiB₂ Particle Dispersed Pure Aluminum Composites</li><li>Development of New Particle Method Based on MPS and its Applicability for Friction Stir Welding of Dissimilar Joint</li><li>Contributions</li><li>Corrosion Resistance of Additive Manufactured Titanium Alloy Parts: The Effect of Recycled Powders</li><li>PL Properties of (Ba, Ca)₂( Si, P)O₄: Eu Synthesized by Various Annealing and Cooling Process</li><li>Microstructural Prediction of Heat Treated Steel Forgings for Severe Applications</li><li>Influence of Elastic Modulus of Matrix on Conductivity of VGCF Dispersed in Plastic Matrix</li><li>Study of the Impact of the Synergic Line and the Strategy of Conception on Ti-6Al-4V Wire Arc Additive Manufacturing Process (WAAM-CMT)</li><li>Thermomechanical Processing without Accelerated Cooling to Achieve an As-Rolled Yield Strength of 400MPa in C-Mn Steel Plate</li><li>15/15 Ti Stainless Steel Welding Process Optimization for GEN IV Nuclear Application in the GEMMA Project Frame</li><li>High Cycle Fatigue Behaviour of Cu/Sn Intermetallic Compounds Prepared by Transient Liquid Phase Bonding Process</li><li>Thermal and Magnetic Properties of Ternary Fe-B-C and Quaternary Fe-B-C-Si Alloys with High Glass-Forming Ability and High Magnetization</li><li>Adaption of 3D Printing for Rapid Tooling</li><li>High Purity Magnetite Microparticles Directly Derived from Mill Scale via Hydrogen-Reduction Method</li><li>Fracture Behavior of an AlMgMnSc Alloy at Different Temperatures</li><li>Multi-Scale Characterization by Neutronography and Electron Diffraction of Ni Coating on Cu-Ni-Al or Cast-Iron Glass Molds after Laser Cladding</li><li>Design Solutions from Material Selection for Rib Fixators</li><li>Effect of Distance along the Built Axis on Mechanical Properties and Microstructure in Al10SiMg SLM Alloy</li><li>Martensitic Transformation and Damping Behavior of Fe-Mn-Nb Damping Alloys</li><li>Hot and Cold Deformation Behaviors and Microstructure Evolutions of Mn18Cr18N Austenitic Stainless Steel with High-Nitrogen</li><li>Microstructure Evolution in an Advanced High Strength Steel under Continuous Cooling</li><li>Thermal Stability of Ultrafine-Grained Pure Titanium Processed by High-Pressure Torsion</li><li>Study on the Effect of V Microalloying on Earthquake Resisting High-Strength Reinforcing Bar Steels</li><li>Change of Microstructure and Analysis of Fracture of the Ti-50.8 at.% Ni Alloy in the Ultrafine-Grained State after Multiple Martensitic Transformations with a Large Number of Cycles</li><li>Effect of Different Production Processes on Metallic Composite Phase Change Materials for Thermal Energy Storage</li><li>Extended Model for Prediction of Transition from Internal to External Oxidation in Steels: Comparison between Analytical/Semi-Analytical and Numerical Approaches</li><li>Challenges in Printing Certified Additive Manufactured Material: Ensuring Process Stability and Material Quality</li><li>Influence of Mn and Ni on Austenite Stabilization during a High Temperature Q&P Treatment</li><li>Changes in Mechanical and Microstructural Properties of Magnesium Alloys Resulting from Superimposed High Current Density Pulses</li><li>Revisiting the Ostwald Ripening: A Discrete Model Based on Multiple Pairwise Interactions</li><li>Mechanical Properties of Selective Laser-Melted Components of Alsi10mg for Prototype Vehicles</li><li>The Isothermal Oxidation of MCrAlY Protective Coatings</li><li>Delamination of Pearlitic Steel Wires: Role of Strain Partition on Mechanical Properties of Pearlitic Wires</li><li>Evolution of the Microstructure and Mechanical Properties of the Ultrafine-Grained VT8M-1 during Isothermal Die Forging and Thermal Treatment</li><li>Statistical Errors in X-Ray Triaxial Stress Analysis by Cos ? Method</li><li>Thermal Stability of Retained Austenite in Advanced TRIP Steel with Bainitic Ferrite Matrix for Automotive Industries</li><li>3d Printer Heads for Extrusion of Biologicals Gels</li><li>Influence of Surface Roughness on the Corrosion Behaviors of DP590 Steel</li><li>Hot Stamped Aluminium for Crash-Resistant Automobile Safety Cage Applications</li><li>Performance of Vibration Power Generators Using Single Crystal and Polycrystal Magnetic Cores of Fe-Ga Alloys</li><li>Biocompatibility of Anodized Low-Cost Ti-4.7Mo-4.5Fe Alloy</li><li>Effect of Thermomechanical Treatments on the Mechanical Properties of New Low-Cost Ti-Fe-Nb-Zr Alloys</li><li>Tailored Liquid Phases for Enhanced Sintering of Advanced PM - Steels</li><li>Aging Response in Selective Laser Melted AlSi10Mg Alloy as Function of Distance from the Substrate Plate</li><li>Fracture Toughness and Fatigue Crack Growth Characteristics of UFG Microalloyed and IF Steels Processed by Critical Phase Control Multiaxial Forging</li><li>Thermal Barrier Coatings for Molybdenum Produced Using Nanopowders</li><li>Increasing Hardenability and Hardness of Quenching and Tempering Alloys by Substituting Chromium with Manganese</li><li>Multi-Class Grain Size Model for Forged Alloy 718 Aircraft Parts</li><li>Non-Vacuum Fabrication of Bandgap-Controlled CZTGS Alloy Films Using CZTS+CZGS Mixed Nanoparticle Inks</li><li>Tensile Deformation Behavior of Magnesium Single Crystals with Different Yttrium Concentrations</li><li>Brazing of Stainless Steel Using Electrolytic Ni-P Plating Film and Investigation of Corrosion Behavior</li><li>Shear Banding in Rotated Goss Grains and its Effect on the Formation of Cube Texture in Non-Oriented Electrical Steel</li><li>Micromechanical Simulation Approach of Dual Phase Steel Artificial Microstructure Using Random Field Model</li><li>Orthotropic Behaviour of Magnesium AZ31 Sheet during Strain Localization</li><li>Microstructure and Tensile Properties of Sn-Ag-Cu-In-Sb Solder</li><li>Iron Carbon Masteralloy as Sintering Activator for Low Alloy Powder Metallurgy Steels</li><li>Quantitative Detection of Hydrogen Gas Release during Slow Strain Rate Testing in Aluminum Alloys</li><li>Effect of Compressive Residual Stress on Film Formed by Mechanochemical Multifunction Cavitation Processing</li><li>Grain Refinement of Fe-X Alloys Fabricated by Laser Powder Bed Fusion</li><li>The Influence of Introduced Strains on the Exfoliation Corrosion Behavior of Mg-14mass%Li-1mass%Al Alloy</li><li>Corrosion Resistance of Mg Alloy with High Zn Concentration Including Impurity Cu</li><li>Optimization of Slab Edge in Roughing of Stainless Steel</li><li>Orientation Analysis</li><li>Parametric Study of Pulse Arc Welding (PAW) and Laser Beam Welding (LBW) Techniques for Electrical Vehicle Battery Cells</li><li>Post-Fire Performance of Square Concrete-Filled Steel Tube Columns under Uni-Axial Load</li><li>Promising Bendability of a New As-Rolled Medium-Carbon, Low-Alloy Steel with Isothermal Upper and Lower Bainitic Microstructure</li><li>Study on Forging Permeability of 06Cr19Ni9NbN Steel during Hot Deformation</li><li>Influence of Chromium and Niobium on the Press-Hardening Process of Multiphase Low-Alloy TRIP Steels</li><li>Optimising Computational Fluid Dynamic Conditions for Simulating Copper Vertical Casting</li><li>Improvement on Impact Toughness of Cold Formed S420 Steel by Direct Quenching</li><li>Effect of Cooling Rate below Ms Temperature on Hydrogen Embrittlement of TRIP-Aided Martensitic Steels</li><li>Investigation of Temperature Evolution and Flash Formation at AA5083 Studs during Friction Surfacing</li><li>Microstructure and Precipitation Studies of Gas Tungsten Arc Welded Haynes 282 Superalloy</li><li>Carrier Concentration of CeFe₂Al₁₀ as a Candidate of Thermoelectric Material</li><li>Effect of Alloying Element on Mechanical Properties of High Strength Austenitic Steel</li><li>Magnetic and Mechanical Properties of Fe-Cr-Si-Mo Alloys by MIM Process</li><li>Structural Changes in Multi Principal Element Alloys in Dependence on the Aluminium Content</li><li>Shape Memory Properties of Ti-Ni Shape Memory Alloy / Shape Memory Polymer Composites Using Additive Manufacturing</li><li>Temperature Increase during Isothermal Forging of Ti-5Al-2Sn-2Zr-4Cr-4Mo Alloy Using a 1500-Ton Forging Press</li><li>Synthesis PbFCl-Type Mixed Anion <i>A</i>P<i>X</i>(<i>A</i>=Hf, <i>X</i>=S, Se) Superconductors Related with Topological Materials by High-Pressure Technique</li><li>Analysis of the Strain Distribution and Texture Measurements in Asymmetric Rolling (AR) and Asymmetric Accumulative Roll Bonding (AARB)</li><li>Effect of Heat Treatment on Structure and Properties of Martensite Stainless Steel for Ice-Class Ships Obtained by Direct Laser Deposition Method</li><li>Microstructure and Tensile Properties of TRIP-Aided Steel Sheet Subjected to Hot-Rolling and Austempering</li><li>Fabrication of Three-Dimensional Microstructure Film by Ni-Cu Alloy Electrodeposition for Joining Dissimilar Materials</li><li>Reaction Sintering of Tial Intermetallic Compound</li><li>Comprehensive Phase Field Study on Directionally-Solidified MoSi₂/Mo₅Si₃ Eutectic Alloy</li><li>Electron Beam Melting: From Shape Freedom to Material Properties Control at Macro- and Microscale</li><li>Temperature-Dependent Mechanical Stability of Retained Austenite in Thermomechanically Processed 3Mn Steel</li><li>Microstructure and Mechanical Properties of the UFG Magnesium Alloy Mg-1%Ca</li><li>Effect of Microstructure on Joint Strength of Fe/Al Resistance Spot Welding for Multi-Material Components</li><li>Severe Plastic Deformation of Copper, Binary Cu-Zn Solid-Solution Alloys, and High-Strength Brass by High-Pressure Torsion</li><li>Structural Characterization of a Biogenic Secretion Extracted from the Tendon or Ligament in Rabbits for Artificial Ligament Formation</li><li>Enhancing High-Temperature Creep Resistance of <i>In Situ</i> TiAl-Based Matrix Composite by Low Volume Fraction of Ti₂AlC Particles</li><li>Impact of Microstructural Anisotropy of As-Cold-Sprayed Cu Deposits on its Annealing Effect</li><li>Performance of 14Cr ODS-FeCrAl Cladding Tube for Accident Tolerant Fuel</li><li>Analysis of the Applicability of Effective Thermophysical Properties to Composite Phase Change Materials</li><li>Long Term Stability Evaluation of Stress Improvement Effect on Ni-Based Alloy Welds by Various Residual Stress Improvement Methods</li><li>Inhomogeneous Microstructure and its Thermal Stability of AlSi10Mg Lattice Structure Manufactured via Laser Powder Bed Fusion</li><li>Study of Nb Solubility in Hot Charging Process</li><li>Cold Spraying of IN 718-Ni Composite Coatings: Microstructure Characterization and Tribological Performance</li><li>Defect Reduction and Quality Optimization through the Modelling of Plastic Deformation and Metallurgical Evolution</li><li>Grain Boundary Engineering of Strain-Annealed Hastelloy-X</li><li>Modelling of Cyclic Delamination Behavior of Thin Multilayered Structures Using Gradient Elasticity and Damage Accumulation</li><li>Effects of Activated Carbon Counter Electrode on Bifacial Dye Sensitized Solar Cells (DSSCs)</li><li>Dynamic Recrystallization Mechanisms of Nickel Niobium Alloys during Hot Working</li><li>Effect of Stress Gradient on Heat Cycle Fatigue Life Prediction of Solder Joints by Repetitive Bending Test</li><li>Effect of Strain Rate on the Microstructure and ?-Texture Evolutions in ?-Processed Forging of a Near-? Titanium Alloy</li><li>Additive Manufacturing of Multi Layered Bioactive Materials with Improved Mechanical Properties: Modelling Aspects</li><li>Nickel Supported Modified Zirconia Catalysts for CO₂ Methanation in DBD Plasma Catalytic Hybrid Process</li><li>Physical Modelling of Strain Induced Roughness of Copper Wire during Dieless Drawing Process</li><li>Effect of Hot Processing on Mircrostructure and Properties of Flat Billets of TA15 Titanium Alloy</li><li>
<i>In Situ</i> Observation during Copper Alloy Brazing Using an X-Ray System</li><li>Activities of Non-Basal Slips in Rolled Mg-Li and Mg-Ce Alloys Sheets</li><li>Creep Resistance of Ultrafine-Grained VT8M-1 Alloy</li><li>The Domain of Portevin-Le Chatelier Effect in Al-3Mg Alloy</li><li>The Effect of Hydrofluoric Acid Concentration in Sulfuric Acid-Based Desmutting Solution for Aluminium Alloys</li><li>Influence of Hot Pressing Sintering Temperature on the Properties of Low-Density Al_0.5NbTa_0.8Ti_1.5V_0.2Zr Refractory High-Entropy Alloy</li><li>Strain Rate Dependent Mechanical Stability of Retained Austenite in Hot-Rolled Medium-Mn Sheet Steels</li><li>Extra-Hardening of SPD-Processed Al-Mg Alloy with Minimum Grain Sizes</li><li>Improving Mechanical Properties of Twin-Roll Cast AZ31 by Wire Rolling</li><li>Mechanical Behaviour of Beta Titanium Alloys</li><li>Preliminary Development of Cold Spray Procedures for Nickel Aluminum Bronze Casting Repair</li><li>High-Temperature Tribological Properties of ReB₂-Based Ceramic/Si₃N₄ Sliding Pairs</li><li>Effects of Retained Austenite Conditions on the Ductility of the Advanced High Strength Steels</li><li>Solid State Amorphization and Alloy Parameters for High Entropy Alloys</li><li>Corrosion Resistance Evaluation of a Stainless-Steel Brazed Joint in HCl Solution</li><li>Stress Ratio Effect on Fatigue Crack Initiation Mechanism of Magnesium Alloy AZ31</li><li>Applications of Smart Material of Li₂O-(Nb/Ta)₂O₅-TiO₂ Solid Solution Having a Unique Periodical Structure</li><li>Crystal Orientation Relationships among Acicular Ferrite, Oxide and the Austenite Matrix in a Steel Weld Metal</li><li>FTMP-Based Kink Deformation and Strengthening Mechanisms for Mille-Feuille Structures</li><li>Influence of Radial Shear Rolling Regimes on the Homogeneity of Structural-Phase State, Mechanical Properties and Fatigue of near ? Titanium Alloy</li><li>Progress towards a Complete Model of Metal Additive Manufacturing</li><li>Investigation of Three-Dimensional Geometry of Butterfly Martensite and Analysis of Relationship between Hardness of Lath/Butterfly Two-Phase Martensite and its Grain Thickness in Medium-Carbon Steel</li><li>Effect of Cold Reduction Rate on Ferrite Recrystallization Behavior during Annealing in Low-Carbon Steel with Different Initial Microstructures</li><li>Steel Production Technology Development for the Manufacture of Pipes Used in the Extraction and Transportation of Petroleum Products</li><li>Mechanical Joining Utilizing Friction Stir Forming</li><li>Threshold Voltage Control for MONOS Nonvolatile Memory with High-k HfN/HfO₂ Stacked Layers for Analog Memory Application</li><li>Effect of Aging Heat Treatment at 400-600 degreesC on the Microstructure and Tensile Properties of 15Cr-15Ni Ti-Stabilized Steel Cladding</li><li>
<i>In Situ</i> Neutron Diffraction Measurement during Bainite Transformation and Accompanying Carbon Enrichment in Austenite at iMATERIA, J-PARC MLF</li><li>Metallurgy of Highly Wear-Resistant Indefinite-Chill Work Roll Materials for Hot Rolling Mills</li><li>Anisotropy of Plastic Deformation in Hexagonal Metals</li><li>The Multiphase Micro- and Nanostructures of 0.2 and 0.4 C Direct-Quenched and Partitioned Steels</li><li>When 3D Printing Meets Tribological Demands - Surface Functionalization Technologies as Added Value of Existing and New Emerging Products</li><li>A Novel Method for Evaluation of Chromium Evaporation from Solid Oxide Fuel Cells Interconnects: A Feasibility Study</li><li>Microstructure Development in the Bonding Zone of Explosively Welded Ti and Cu Sheets</li><li>Effect of Nano Sodium Titanate Whisker and Aramid Pulp on the Friction and Wear Behavior of Resin-Based Brake Material</li><li>Effect of Nb on the Austenite Microstructural Homogeneity of Hot Rolled Rebars</li><li>The Influence of the Sintering Temperature on the Properties of the 0.98Pb(Zr_1-xTi_x)O₃ - 0.02La(Fe³⁺_0.5, Nb⁵⁺_0.5)O₃ Ceramic Systems</li><li>The Occurrence of a Peripheral Coarse Grain Zone (PCGZ) in Extruded Bars of AA 7108</li><li>Microstructure after Solution Annealing of the Nuclear Grade Austenitic Stainless Steel DIN 1.4970</li><li>Application of Image Analysis Method Combined with Microhardness Measurement to Determine Phase Fractions</li><li>Stability of Ordered B2-?_O and Disordered BCC-? Phases in Tial - A First Principles Study</li><li>The Influence of Process Parameters on Structure of YSZ Coating Deposited by Plasma Spraying on AISI 316L Stainless Steel Surface by APS Method and on Ti6Al4V Titanium Alloy Surface by PS-PVD Method</li><li>Microstructure of Al-2.5Fe Binary Alloy Fabricated by Laser Powder Bed Fusion</li><li>Effect of Extrusion Temperature and Thermal Treatment on Microstructure and Mechanical Properties of Ti-1300 Alloy Tube</li><li>Microstructure and Mechanical Properties of a Lamellar-Structured Low-Alloy TRIP Steel</li><li>Near-Threshold Fatigue Crack Growth Behavior of ECAPed Ultrafine-Grained Copper</li><li>Microstructure Evolution during Strain-Induced Transformation of Austenite in an Austempered Ductile Iron (ADI)</li><li>Influence of Heat and Surface Treatments on the Fatigue Response of DMLS Manufactured AlSi10mg</li><li>Microstructure Evolution during Multiaxial Processing of TA6V</li><li>Mechanism of Void Formation during Brazing of Ni Paste Brazing Filler Metal</li><li>Internal Dislocation Density in Deformed GlidCop from X-Ray Line Profile Analysis</li><li>Effect of Stacking Fault Energy and Solute Atoms on Microstructural Evolutions of FCC Metals Processed by Severe Plastic Deformation</li><li>Friction and Wear Response of a Hard-Anodized AA6082</li><li>Standardization of Cos? Method for X-Ray Stress Measurement</li><li>Effects of Alloying Elements on the Stability of <i>?-</i>Fe Phase in Steel: A Density Functional Theory Study</li><li>Effects of Peening Direction on Reverse Transformation Induced by Shot-Peening for Fe-33%Ni Alloy</li><li>Non-Parametric Comparison of Crystallographic Orientation Distributions</li><li>Metal-Free and Carbon-Free Flexible Self-Supporting Thin Film Electrodes</li><li>Fabrication of Silver-Nanowire/PVDF Self-Supporting Thin Flexible Electrode Membranes</li><li>Miniaturized Blood Sampling System with Integrated Sample Preparation</li><li>From Biomaterial to Organoid - Bioprinting for Practice</li><li>Residual Stress in Automotive Powertrains: Methods and Analyses</li><li>Magnetization and XRD Studies of Laser Heat Treated SmCo₅ Powders</li><li>High Energy Surface Implantation by Ion Nitrogen of Ultra- Fine Grained Ti-6Al-4V Alloy for Engineering Application</li><li>Industrial Fe-Simulation of Roughing Using an Automatic Solver Shifting Technique</li><li>Spinning Formability of Al-Mg-Si Alloy</li><li>Deformation Behavior of Single Particle Cold Spray Ti-6Al-4V Splats</li><li>Effects of Microstructure on the Hydrogen Embrittlement Resistance of Ultra High Strength Martensitic Steel Sheets</li><li>Optimization of Preform for Stub Axle Forging Using Simulation Software</li><li>Hydrogen Embrittlement and Hydrogen Trapping Behaviour in Advanced High Strength Steels</li><li>Properties of Alumina Coatings Deposited by Detonation Spraying</li><li>Experimental Study and Modelling of the Ferritic Steel Anisotropic Behavior under Associated and Non-Associated Flow Rule</li><li>Effect of Silicon Content on the Decomposition of Austenite in 0.4C Steel during Quenching and Partitioning Treatment</li><li>Microstructure and Shape Memory Behavior of Ti-18Nb-6Zr (at.%) Alloy</li><li>Titanium Alloy Milling Using Abrasive Water Jet for Repair Application: Modifications in Surface Quality and Material Integrity Following Plain Water Jet Cleaning</li><li>High-Temperature Oxidation of AISI441 Ferritic Stainless Steel for Solid Oxide Fuel Cells</li><li>Effect of Interstitial Elements on the Cryogenic Mechanical Behavior of FCC High Entropy Alloys</li><li>Microstructure Refinement Effect on EUROFER 97 Steel for Nuclear Fusion Application</li><li>The Effect of Long-Term Heating on Thermal Stability of Ultra-Fine Grained Titanium Alloy VT8M-1 Processed by Rotary Swaging</li><li>Structure and Microstructure of Advanced Materials Characterized by Neutron Diffraction</li><li>Evaluation of Interfacial Thermal Resistance of Al-AlN Composites by Using Image-Based Calculation</li><li>The Effect of Ni Precursor Salts on Diatomite Supported Ni-Mg Catalysts in Methanation of CO₂</li><li>Performance of a Matrix Type High Speed Steel after Deep Cryogenic and Low Tempering Temperature</li><li>Development of High-Accuracy Simulation Test Technology for Hot Stamping</li><li>Effect of Temperature and Humidity on Degradation Behavior of Cu/Epoxy Interface under High Temperature and High Humidity Aging</li><li>Tensile Deformation of Si Single Crystals at High Temperatures</li><li>
<i>In Situ</i> Evaluation of the Joining Defects in a Pb-Free Soldered Joint</li><li>Evaluation of Tensile Shear Strength for Lap Joint of Dissimilar Steels</li><li>Microstructure Modification of 3D Printed Aluminium Alloys by Friction Stir Processing</li><li>Investigation of Bonding Strength of Al Solid Phase Diffusion Bonded Joint with Surface Treatment Using Electrolyzed Water</li><li>Powders for Additive Manufacturing: From Design to Certification</li><li>Mechanical Property and Heat Treatment Behaviour of Ti-Zr-Fe Alloys</li><li>Study of High Temperature Properties of AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion</li><li>Optimization of Molecular Characteristics via Machine Learning Based on Continuous Representation of Molecules</li><li>Utilisation of Titanium and Titanium Dioxide as Scaffolds for Proliferating Coral Reef</li><li>Improvement of Strength and Ductility by Combining Static Recrystallization and Unique Heat Treatment in Co-20Cr-15W-10Ni Alloy for Stent Application</li><li>Effects of Carbon Content Change on Growth of Compound Layer in Surface of Nitrided Steel</li><li>Bending and Welding of New High Oxidation Material - Thor (TM) 115</li><li>Surface Morphology of Refractory Metals Submitted to a Single Laser Pulse</li><li>Integral Computer Model for Simulating Microstructure Evolution during Thermomechanical Processing and Heat Treatment of Steels and Predicting their Final Mechanical Properties</li><li>Studies on Thermomechanical Cycling Characteristics of an Ni-Ti-Cu Shape Memory Alloy</li><li>Finite Element Analysis of Surface Modification of Titanium Alloy Used for Hip Implant</li><li>Forming an Optically Transparent Graphene Film via the Transformation of C₆₀ Molecules</li><li>Effect of the Pre-Strain on the Elastic Behavior of a Dual-Phase Steel with Different Martensite Contents</li><li>Adhesion Properties of Thin Film Multilayers: Comparison of Nanoindentation and Four-Point-Bending Techniques</li><li>Effect of Strain Rate on Compressive Behavior of a ZrCuNiAl Bulk Metallic Glass at Room Temperature</li><li>Effect of Cellular Dislocation Structure on the Strength of Additively Manufactured 316L Stainless Steel</li><li>Syngas Production by Dry Methane Reforming over Mg Doped NiO-ZrO₂ Catalysts</li><li>Deformation Property of Dense Oxide Coated Magnesium Alloy Surface</li><li>Remelting of Thermal Spraying Coatings - Technologies, Properties and Applications</li><li>Processing of Nanostructured Bulk Fe-Cr Alloys by Severe Plastic Deformation</li><li>Study of the Microstructure and Mechanical Properties Obtained by Laser Boost in SLM Process for the Ti-64 Alloy</li><li>The Influence of HPT on Microstructure and Wear Resistance of Al-7wt%Si-2wt%Fe Alloy</li><li>Mechanical Behaviour of Rubber Material with Consideration to Mullins Effect</li><li>Investigation on Surface Roughness in Electron Beam Selective Melting by Mesoscale Model</li><li>Static Recrystallization in Aluminum/Graphene Composites</li><li>Correlation of Segregation Energies of Ni and Fe with Mendeleev Number</li><li>Operando Monitoring of Charging Processes in Battery Cathodes by Magnetometry and Positron Annihilation</li><li>Goss Texture Evolution in a Grain-Oriented Fe-6.5wt%Si Steel Processed by Strip-Casting</li><li>Investigation of the Role of Intermetallic Phases in Microstructure of UFG Titanium VT8M-1 Alloy</li><li>The Effect of Aging Conditions on the Stress Relaxation Behavior of 17-7PH Stainless Steel</li><li>First-Principles Study of Epoxy Resin Adhesion to Tin Oxide Surface</li><li>Formation of Cemented Tungsten Carbide Layer with Compositional Gradient Processed by Directed Energy Deposition</li><li>The Impact of Interface Characteristics on Mechanical Performance of a Hot-Forged Cu/Ti-Coated-Diamond Composite</li><li>Effect of Chemical Composition on Grain Refinement of Al_xCoCrFeNi High Entropy Alloys with NiAl Grain Boundary Precipitates</li><li>Improvement of Mechanical Properties of Laminated Composites by Using Cryogenic Roll Bonding</li><li>Development of Cu Coating on Ceramic Substrates by Low Pressure Cold Spray and its Deposition Mechanism Analysis</li><li>Thermal Degradation Behavior of Hydrogen Permeability of Pd-Coated V-Alloy Membrane for Hydrogen Separation and Purification</li><li>Analysis of Different Thermal Conductivity Measurements for Al-Si Casting Alloys</li><li>Dislocations of Ti-600 Alloy Crept at 600 degreesC with Two Stresses</li><li>Microstructure and Mechanical Properties of Cu-Fe Alloys via Powder Metallurgy</li><li>Numerical Simulation of Microstructure Evolution during Continuous Hot Rolling Process of GCr15 Steel Rod</li><li>Effect of Tempering Time on Microstructure and Mechanical Properties of SA738 Gr.B Steel</li><li>The Microstructure and Properties of Low Carbon PM 625 Alloy for Marine-Based Application</li><li>Efficiency of Microstructure Refinement in Ti-Based Alloys</li><li>Metallic Composites, Prepared by Deformation Processing</li><li>The Effect of Deformation Strain on Texture Uniformity in Tantalum Sheet during Asymmetric Cross Rolling</li><li>Effects of Powder Microscopic Defects on Densification and Mechanical Properties of WC via Spark Plasma Sintering</li><li>Three-Dimensional Characterization of Morphology and Crystallography of a Gold Nanoisland Film</li><li>Unmixed Joint of A1050 and C1020 by Friction Stir Butt Welding</li><li>Spark Plasma Sintering of Paper-Derived Ti₃AlC₂-Based Composites: Influence of Sintering Temperature</li><li>Fabrication of Be-Ta Ti Alloys without Pre-Alloyed Powders via SLM</li><li>Martensitic Transformation of High-Entropy and Medium-Entropy Shape Memory Alloys</li><li>Suppression of Intergranular Fracture in 7000 Series Aluminum Alloys</li><li>Elasto-Plastic Deformation of Heterogeneous Metallic Materials: An Experimental Approach with AlMg4Si10</li><li>Effects of Tensile Testing Temperature on Mechanical Properties and Deformation Behavior in Medium Mn Steels</li><li>Characteristics of Cube Orientation for Pure Iron Tape Fabricated by Cold Rolling and Annealing</li><li>The Application of Neutron Diffraction Techniques (NDT) in Measuring Residual Strain-Stresses of Engineering Materials</li><li>Evaluation of Color Tone and Exfoliation Resistance of Porcelain-Firing Ti with White Oxide Coating as an Opaque Layer</li><li>Effects of Nb Content and Heat Treatment on Fretting Wear Behavior of Ti-Nb Alloys</li><li>Modelling Dilatometry Data of Isothermal ?-Phase Formation in a Strongly ?-Stabilised TiV-Alloy</li><li>Hardness Prediction of AA 2024-T3 FSW Weld</li><li>Density Functional Theory Study of the Adsorption of Metal Adatoms on Graphene</li><li>Investigation of CGHAZ Simulations of Low-Carbon Bainitic Steels</li><li>Grey-Fuzzy Logic Based Approach in Multi-Response Optimization of Semi-Solid Forging of A356 Aluminium Alloy</li><li>Microstructure Factor of Creep Behavior in Near-? Ti Alloy</li></ul>